Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Lin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Self-citation
Cited by
Items 801–900 of 1,016
Perovskite Thin Films via Atomic Layer Deposition
Sutherland, B. R., Hoogland, S., Adachi, M. M., Kanjanaboos, P., Wong, C. T. O., McDowell, J. J., Xu, J., Voznyy, O., Ning, Z., Houtepen, A. J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403965 · Cited by 235
Bai, S., Wu, Z., Wu, X., Jin, Y., Zhao, N., Chen, Z., Mei, Q., Wang, X., Ye, Z., Song, T., et al. (2014) · Nano Research · doi:10.1007/s12274-014-0534-8 · Cited by 235
“Recently solution-processed methylammonium lead halide perovskites, with absorption depths between 100 to 200 nm depending on the wavelengths of the incident light, were identified as promising absorbers for high-performance solar cells [8-25].”
Additive-Modulated Evolution of HC(NH2)2PbI3 Black Polymorph for Mesoscopic Perovskite Solar Cells
Wang, Z., Zhou, Y., Pang, S., Xiao, Z., Zhang, J., Chai, W., Xu, H., Liu, Z., Padture, N. P., & Cui, G. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03169 · Cited by 237
Huang, H., Shi, J., Zhu, L., Li, D., Luo, Y., & Meng, Q. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.026 · Cited by 237
Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films
Cho, N., Li, F., Turedi, B., Sinatra, L., Sarmah, S. P., Parida, M. R., Saidaminov, M. I., Murali, B., Burlakov, V. M., Goriely, A., et al. (2016) · Nature Communications · doi:10.1038/ncomms13407 · Cited by 238
Liu, D., Li, Y., Yuan, J., Hong, Q., Shi, G., Yuan, D., Wei, J., Huang, C., Tang, J., & Fung, M.-K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10212c · Cited by 237
Wei, H., Xiao, J., Yang, Y., Lv, S., Shi, J., Xu, X., Dong, J., Luo, Y., Li, D., & Meng, Q. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.042 · Cited by 236
Zhou, Y., Wang, F., Cao, Y., Wang, J., Fang, H., Loi, M. A., Zhao, N., & Wong, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701048 · Cited by 234
McMeekin, D. P., Holzhey, P., Fürer, S. O., Harvey, S. P., Schelhas, L. T., Ball, J. M., Mahesh, S., Seo, S., Hawkins, N., Lu, J., et al. (2023) · Nature Materials · doi:10.1038/s41563-022-01399-8 · Cited by 235
Plasmonic‐Induced Photon Recycling in Metal Halide Perovskite Solar Cells
Saliba, M., Zhang, W., Burlakov, V. M., Stranks, S. D., Sun, Y., Ball, J. M., Johnston, M. B., Goriely, A., Wiesner, U., & Snaith, H. J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500669 · Cited by 235
A simple spiro-type hole transporting material for efficient perovskite solar cells
Ganesan, P., Fu, K., Gao, P., Raabe, I., Schenk, K., Scopelliti, R., Luo, J., Wong, L. H., Grätzel, M., & Nazeeruddin, M. K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03773a · Cited by 233
Self-citationSun, W., Li, Y., Ye, S., Rao, H., Yan, W., Peng, H., Li, Y., Liu, Z., Wang, S., Chen, Z., et al. (2016) · Nanoscale · doi:10.1039/c6nr01927g · Cited by 236
Lü, X., Wang, Y., Stoumpos, C. C., Hu, Q., Guo, X., Chen, H., Yang, L., Smith, J. S., Yang, W., Zhao, Y., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600771 · Cited by 233
Enhancement of thermal stability for perovskite solar cells through cesium doping
Niu, G., Li, W., Li, J., Liang, X., & Wang, L. (2017) · RSC Advances · doi:10.1039/c6ra28501e · Cited by 235
Sobayel, K., Akhtaruzzaman, M., Rahman, K. S., Ferdaous, M. T., Al-Mutairi, Z. A., Alharbi, H. F., Alharthi, N. H., Karim, M. R., Hasmady, S., & Amin, N. (2019) · Results in Physics · doi:10.1016/j.rinp.2018.12.049 · Cited by 231
Nickel Oxide as Efficient Hole Transport Materials for Perovskite Solar Cells
Yin, X., Guo, Y., Xie, H., Que, W., & Kong, L. B. (2019) · Solar RRL · doi:10.1002/solr.201900001 · Cited by 233
A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells
Zhao, Y., Zhu, P., Wang, M., Huang, S., Zhao, Z., Tan, S., Han, T., Lee, J., Huang, T., Wang, R., et al. (2020) · Advanced Materials · doi:10.1002/adma.201907769 · Cited by 235
Li, Z., Xu, Q., Sun, Q., Hou, Z., & Yin, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807280 · Cited by 233
Navas, J., Sánchez-Coronilla, A., Gallardo, J. J., Cruz Hernández, N., Piñero, J. C., Alcántara, R., Fernández-Lorenzo, C., De los Santos, D. M., Aguilar, T., & Martín-Calleja, J. (2015) · Nanoscale · doi:10.1039/c5nr00041f · Cited by 233
Atomic layer deposition for perovskite solar cells: research status, opportunities and challenges
Zardetto, V., Williams, B. L., Perrotta, A., Di Giacomo, F., Verheijen, M. A., Andriessen, R., Kessels, W. M. M., & Creatore, M. (2017) · Sustainable Energy & Fuels · doi:10.1039/c6se00076b · Cited by 232
Xie, L.-Q., Chen, L., Nan, Z.-A., Lin, H.-X., Wang, T., Zhan, D.-P., Yan, J.-W., Mao, B.-W., & Tian, Z.-Q. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12432 · Cited by 232
Low-dimensional halide perovskites: review and issues
Hong, K., Le, Q. V., Kim, S. Y., & Jang, H. W. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc05658c · Cited by 235
Le Corre, V. M., Stolterfoht, M., Perdigón Toro, L., Feuerstein, M., Wolff, C., Gil-Escrig, L., Bolink, H. J., Neher, D., & Koster, L. J. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00856 · Cited by 229
Insight into Perovskite Solar Cells Based on SnO2 Compact Electron-Selective Layer
Dong, Q., Shi, Y., Wang, K., Li, Y., Wang, S., Zhang, H., Xing, Y., Du, Y., Bai, X., & Ma, T. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00541 · Cited by 232
Chen, H., Fu, W., Huang, C., Zhang, Z., Li, S., Ding, F., Shi, M., Li, C., Jen, A. K. ‐., & Chen, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700012 · Cited by 232
Perovskites photovoltaic solar cells: An overview of current status
Tonui, P., Oseni, S. O., Sharma, G., Yan, Q., & Tessema Mola, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.069 · Cited by 229
Polarization Switching and Light-Enhanced Piezoelectricity in Lead Halide Perovskites
Coll, M., Gomez, A., Mas-Marza, E., Almora, O., Garcia-Belmonte, G., Campoy-Quiles, M., & Bisquert, J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00502 · Cited by 229
Han, J. S., Le, Q. V., Choi, J., Kim, H., Kim, S. G., Hong, K., Moon, C. W., Kim, T. L., Kim, S. Y., & Jang, H. W. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15769 · Cited by 232
Self-citationWu, G., Li, X., Zhou, J., Zhang, J., Zhang, X., Leng, X., Wang, P., Chen, M., Zhang, D., Zhao, K., et al. (2019) · Advanced Materials · doi:10.1002/adma.201903889 · Cited by 230
An overview of the Challenges in the commercialization of dye sensitized solar cells
Mozaffari, S., Nateghi, M. R., & Zarandi, M. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.096 · Cited by 229
Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells
Liu, Z., Zhu, A., Cai, F., Tao, L., Zhou, Y., Zhao, Z., Chen, Q., Cheng, Y.-B., & Zhou, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01593c · Cited by 228
Lee, B., Krenselewski, A., Baik, S. I., Seidman, D. N., & Chang, R. P. H. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00100b · Cited by 228
Passivation in perovskite solar cells: A review
Zhao, P., Kim, B. J., & Jung, H. S. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.01.004 · Cited by 228
Abdi‐Jalebi, M., Dar, M. I., Sadhanala, A., Senanayak, S. P., Franckevičius, M., Arora, N., Hu, Y., Nazeeruddin, M. K., Zakeeruddin, S. M., Grätzel, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502472 · Cited by 228
Self-citationBi, H., Zuo, X., Liu, B., He, D., Bai, L., Wang, W., Li, X., Xiao, Z., Sun, K., Song, Q., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta12612h · Cited by 229
Advanced Organic–Inorganic Hybrid Materials for Optoelectronic Applications
Zhou, K., Qi, B., Liu, Z., Wang, X., Sun, Y., & Zhang, L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202411671 · Cited by 228
Water Infiltration in Methylammonium Lead Iodide Perovskite: Fast and Inconspicuous
Müller, C., Glaser, T., Plogmeyer, M., Sendner, M., Döring, S., Bakulin, A. A., Brzuska, C., Scheer, R., Pshenichnikov, M. S., Kowalsky, W., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03883 · Cited by 231
The In‐Gap Electronic State Spectrum of Methylammonium Lead Iodide Single‐Crystal Perovskites
Adinolfi, V., Yuan, M., Comin, R., Thibau, E. S., Shi, D., Saidaminov, M. I., Kanjanaboos, P., Kopilovic, D., Hoogland, S., Lu, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505162 · Cited by 228
High irradiance performance of metal halide perovskites for concentrator photovoltaics
Wang, Z., Lin, Q., Wenger, B., Christoforo, M. G., Lin, Y.-H., Klug, M. T., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2018) · Nature Energy · doi:10.1038/s41560-018-0220-2 · Cited by 229
Potential Substitutes for Replacement of Lead in Perovskite Solar Cells: A Review
Kour, R., Arya, S., Verma, S., Gupta, J., Bandhoria, P., Bharti, V., Datt, R., & Gupta, V. (2019) · Global Challenges · doi:10.1002/gch2.201900050 · Cited by 229
Lead immobilization for environmentally sustainable perovskite solar cells
Zhang, H., Lee, J.-W., Nasti, G., Handy, R., Abate, A., Grätzel, M., & Park, N.-G. (2023) · Nature · doi:10.1038/s41586-023-05938-4 · Cited by 224
“We discuss here chemical approaches to fundamentally resolve the issue, categorized into: (1) regulating the solubility and diffusivity of lead ions in the device and (2) chemical adsorption of the leaking lead ions through lead-adsorbing materials.”
BackgroundSelf-citationQu, Z., Zhao, Y., Ma, F., Mei, L., Chen, X.-K., Zhou, H., Chu, X., Yang, Y., Jiang, Q., Zhang, X., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-52925-y · Cited by 208
Faizan, M., Bhamu, K. C., Murtaza, G., He, X., Kulhari, N., AL‐Anazy, M. M., & Khan, S. H. (2021) · Scientific Reports · doi:10.1038/s41598-021-86145-x · Cited by 225
Zhao, Y., Liang, C., Zhang, H., Li, D., Tian, D., Li, G., Jing, X., Zhang, W., Xiao, W., Liu, Q., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee04064c · Cited by 226
Electrochemical Characterization of TiO2Blocking Layers for Dye-Sensitized Solar Cells
Kavan, L., Tétreault, N., Moehl, T., & Grätzel, M. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp4103614 · Cited by 225
Self-citationMiyasaka, T. (2015) · Chemistry Letters · doi:10.1246/cl.150175 · Cited by 226
Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects
Peng, X., Yuan, J., Shen, S., Gao, M., Chesman, A. S. R., Yin, H., Cheng, J., Zhang, Q., & Angmo, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703704 · Cited by 224
Organic interfacial materials for perovskite-based optoelectronic devices
Pham, H. D., Xianqiang, L., Li, W., Manzhos, S., Kyaw, A. K. K., & Sonar, P. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02744g · Cited by 225
Lai, H., Lu, D., Xu, Z., Zheng, N., Xie, Z., & Liu, Y. (2020) · Advanced Materials · doi:10.1002/adma.202001470 · Cited by 227
Giant photostriction in organic–inorganic lead halide perovskites
Zhou, Y., You, L., Wang, S., Ku, Z., Fan, H., Schmidt, D., Rusydi, A., Chang, L., Wang, L., Ren, P., et al. (2016) · Nature Communications · doi:10.1038/ncomms11193 · Cited by 224
Mobile Ions in Organohalide Perovskites: Interplay of Electronic Structure and Dynamics
Mosconi, E., & De Angelis, F. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00108 · Cited by 223
The role of carbon-based materials in enhancing the stability of perovskite solar cells
Hadadian, M., Smått, J.-H., & Correa-Baena, J.-P. (2020) · Energy & Environmental Science · doi:10.1039/c9ee04030g · Cited by 222
Homogenized contact in all-perovskite tandems using tailored 2D perovskite
Wang, Y., Lin, R., Liu, C., Wang, X., Chosy, C., Haruta, Y., Bui, A. D., Li, M., Sun, H., Zheng, X., et al. (2024) · Nature · doi:10.1038/s41586-024-08158-6 · Cited by 212
Niemann, R. G., Kontos, A. G., Palles, D., Kamitsos, E. I., Kaltzoglou, A., Brivio, F., Falaras, P., & Cameron, P. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11256 · Cited by 225
Yang, G., Lei, H., Tao, H., Zheng, X., Ma, J., Liu, Q., Ke, W., Chen, Z., Xiong, L., Qin, P., et al. (2017) · Small · doi:10.1002/smll.201601769 · Cited by 222
A strategic review on processing routes towards highly efficient perovskite solar cells
Dubey, A., Adhikari, N., Mabrouk, S., Wu, F., Chen, K., Yang, S., & Qiao, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08277k · Cited by 226
Strategies for Improving the Stability of Tin‐Based Perovskite (ASnX3) Solar Cells
Yao, H., Zhou, F., Li, Z., Ci, Z., Ding, L., & Jin, Z. (2020) · Advanced Science · doi:10.1002/advs.201903540 · Cited by 221
Ligand‐Modulated Excess PbI2 Nanosheets for Highly Efficient and Stable Perovskite Solar Cells
Wang, H., Wang, Z., Yang, Z., Xu, Y., Ding, Y., Tan, L., Yi, C., Zhang, Z., Meng, K., Chen, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000865 · Cited by 223
Efficient light-emitting diodes from mixed-dimensional perovskites on a fluoride interface
Zhao, B., Lian, Y., Cui, L., Divitini, G., Kusch, G., Ruggeri, E., Auras, F., Li, W., Yang, D., Zhu, B., et al. (2020) · Nature Electronics · doi:10.1038/s41928-020-00487-4 · Cited by 222
Wide-Bandgap Metal Halide Perovskites for Tandem Solar Cells
Tong, J., Jiang, Q., Zhang, F., Kang, S. B., Kim, D. H., & Zhu, K. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02105 · Cited by 224
Liu, Y., Bag, M., Renna, L. A., Page, Z. A., Kim, P., Emrick, T., Venkataraman, D., & Russell, T. P. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501606 · Cited by 223
Spectral Features and Charge Dynamics of Lead Halide Perovskites: Origins and Interpretations
Sum, T. C., Mathews, N., Xing, G., Lim, S. S., Chong, W. K., Giovanni, D., & Dewi, H. A. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00433 · Cited by 221
Aluminum-Doped Zinc Oxide as Highly Stable Electron Collection Layer for Perovskite Solar Cells
Zhao, X., Shen, H., Zhang, Y., Li, X., Zhao, X., Tai, M., Li, J., Li, J., Li, X., & Lin, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00520 · Cited by 224
Wang, B., Iocozzia, J., Zhang, M., Ye, M., Yan, S., Jin, H., Wang, S., Zou, Z., & Lin, Z. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00254e · Cited by 222
Large-area perovskite solar cells employing spiro-Naph hole transport material
Jeong, M., Choi, I. W., Yim, K., Jeong, S., Kim, M., Choi, S. J., Cho, Y., An, J.-H., Kim, H.-B., Jo, Y., et al. (2022) · Nature Photonics · doi:10.1038/s41566-021-00931-7 · Cited by 224
Self-citationRao, H., Chen, B., Li, W., Xu, Y., Chen, H., Kuang, D., & Su, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501264 · Cited by 222
Ke, W., Zhao, D., Cimaroli, A. J., Grice, C. R., Qin, P., Liu, Q., Xiong, L., Yan, Y., & Fang, G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06574g · Cited by 224
Ultrathin Cu2O as an efficient inorganic hole transporting material for perovskite solar cells
Yu, W., Li, F., Wang, H., Alarousu, E., Chen, Y., Lin, B., Wang, L., Hedhili, M. N., Li, Y., Wu, K., et al. (2016) · Nanoscale · doi:10.1039/c5nr07758c · Cited by 220
Hybrid perovskites for photovoltaics: Insights from first principles
Filippetti, A., & Mattoni, A. (2014) · Physical Review B · doi:10.1103/physrevb.89.125203 · Cited by 224
Ke, W., Zhao, D., Xiao, C., Wang, C., Cimaroli, A. J., Grice, C. R., Yang, M., Li, Z., Jiang, C.-S., Al-Jassim, M., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05095f · Cited by 223
Influence of Radiation on the Properties and the Stability of Hybrid Perovskites
Lang, F., Shargaieva, O., Brus, V. V., Neitzert, H. C., Rappich, J., & Nickel, N. H. (2018) · Advanced Materials · doi:10.1002/adma.201702905 · Cited by 222
Mahmood, Q., Ghrib, T., Rached, A., Laref, A., & Kamran, M. A. (2020) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2020.105009 · Cited by 221
Nenon, D. P., Christians, J. A., Wheeler, L. M., Blackburn, J. L., Sanehira, E. M., Dou, B., Olsen, M. L., Zhu, K., Berry, J. J., & Luther, J. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01047d · Cited by 221
Recent progress in perovskite solar cells
Assadi, M. K., Bakhoda, S., Saidur, R., & Hanaei, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.06.088 · Cited by 218
Unipolar self-doping behavior in perovskite CH3NH3PbBr3
Shi, T., Yin, W.-J., Hong, F., Zhu, K., & Yan, Y. (2015) · Applied Physics Letters · doi:10.1063/1.4914544 · Cited by 221
Feng, J., & Xiao, B. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp506498k · Cited by 218
Bisquert, J., Bertoluzzi, L., Mora-Sero, I., & Garcia-Belmonte, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5062144 · Cited by 219
Adinolfi, V., Peng, W., Walters, G., Bakr, O. M., & Sargent, E. H. (2018) · Advanced Materials · doi:10.1002/adma.201700764 · Cited by 219
Interfacial Electron Transfer Barrier at Compact TiO2/CH3NH3PbI3Heterojunction
Xing, G., Wu, B., Chen, S., Chua, J., Yantara, N., Mhaisalkar, S., Mathews, N., & Sum, T. C. (2015) · Small · doi:10.1002/smll.201403719 · Cited by 221
Graphene in perovskite solar cells: device design, characterization and implementation
Acik, M., & Darling, S. B. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09911k · Cited by 216
Fan, P., Gu, D., Liang, G.-X., Luo, J.-T., Chen, J.-L., Zheng, Z.-H., & Zhang, D.-P. (2016) · Scientific Reports · doi:10.1038/srep29910 · Cited by 216
Szafrański, M., & Katrusiak, A. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01648 · Cited by 217
Organic/Inorganic Metal Halide Perovskite Optoelectronic Devices beyond Solar Cells
Sun, J., Wu, J., Tong, X., Lin, F., Wang, Y., & Wang, Z. M. (2018) · Advanced Science · doi:10.1002/advs.201700780 · Cited by 219
Origin of Low Carrier Mobilities in Halide Perovskites
Poncé, S., Schlipf, M., & Giustino, F. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02346 · Cited by 216
Spectrum-Dependent Spiro-OMeTAD Oxidization Mechanism in Perovskite Solar Cells
Wang, S., Yuan, W., & Meng, Y. S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07703 · Cited by 217
Encapsulation of Perovskite Solar Cells for High Humidity Conditions
Dong, Q., Liu, F., Wong, M. K., Tam, H. W., Djurišić, A. B., Ng, A., Surya, C., Chan, W. K., & Ng, A. M. C. (2016) · ChemSusChem · doi:10.1002/cssc.201600868 · Cited by 218
Fujisawa, J.-I., Eda, T., & Hanaya, M. (2017) · Chemical Physics Letters · doi:10.1016/j.cplett.2017.07.031 · Cited by 215
Suppressed phase separation of mixed-halide perovskites confined in endotaxial matrices
Wang, X., Ling, Y., Lian, X., Xin, Y., Dhungana, K. B., Perez-Orive, F., Knox, J., Chen, Z., Zhou, Y., Beery, D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08610-6 · Cited by 218
Slot-die coating of perovskite solar cells: An overview
Patidar, R., Burkitt, D., Hooper, K., Richards, D., & Watson, T. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100808 · Cited by 215
Stability of Perovskite Solar Cells: Degradation Mechanisms and Remedies
Mazumdar, S., Zhao, Y., & Zhang, X. (2021) · Frontiers in Electronics · doi:10.3389/felec.2021.712785 · Cited by 211
Narrow Bandgap Metal Halide Perovskites for All-Perovskite Tandem Photovoltaics
Hu, S., Thiesbrummel, J., Pascual, J., Stolterfoht, M., Wakamiya, A., & Snaith, H. J. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00667 · Cited by 209
18.5% efficient graphene/GaAs van der Waals heterostructure solar cell
Li, X., Chen, W., Zhang, S., Wu, Z., Wang, P., Xu, Z., Chen, H., Yin, W., Zhong, H., & Lin, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.003 · Cited by 217
Recent progress in organic–inorganic halide perovskite solar cells: mechanisms and material design
Luo, S., & Daoud, W. A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04953e · Cited by 215
Control of light, spin and charge with chiral metal halide semiconductors
Lu, H., Vardeny, Z. V., & Beard, M. C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00399-1 · Cited by 203
Organohalide lead perovskite based photodetectors with much enhanced performance
Xia, H.-R., Li, J., Sun, W.-T., & Peng, L.-M. (2014) · Chem. Commun. · doi:10.1039/c4cc05960c · Cited by 214
Benzotrithiophene‐Based Hole‐Transporting Materials for 18.2 % Perovskite Solar Cells
Molina‐Ontoria, A., Zimmermann, I., Garcia‐Benito, I., Gratia, P., Roldán‐Carmona, C., Aghazada, S., Graetzel, M., Nazeeruddin, M. K., & Martín, N. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511877 · Cited by 214
Self-citationDoping and alloying for improved perovskite solar cells
Zhou, Y., Zhou, Z., Chen, M., Zong, Y., Huang, J., Pang, S., & Padture, N. P. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08699c · Cited by 217
Limitations of Cs3Bi2I9 as Lead-Free Photovoltaic Absorber Materials
Ghosh, B., Wu, B., Mulmudi, H. K., Guet, C., Weber, K., Sum, T. C., Mhaisalkar, S., & Mathews, N. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14735 · Cited by 212
Breakthroughs in NiOx-HTMs towards stable, low-cost and efficient perovskite solar cells
Sajid, S., Elseman, A. M., Huang, H., Ji, J., Dou, S., Jiang, H., Liu, X., Wei, D., Cui, P., & Li, M. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.082 · Cited by 215
Nakka, L., Cheng, Y., Aberle, A. G., & Lin, F. (2022) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202200045 · Cited by 214
Metadata
- Authors
- Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
- Affiliations
- Sungkyunkwan University (KR)
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Park, Nam-Gyu
- Venue
- Scientific Reports
- Published
- 2012-08-21
- Volume
- 2
- Issue
- 1
- Pages
- 591-591
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3423636
- OpenAlex
- W2169328609
- Semantic Scholar
- 84c7f2dcb014acfa2e3da9bab0f390e859735a06
- Cited by
- 8,092
- References
- 27
- Citations by year
- 2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
- FWCI
- 244.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-sa
- creativecommons.org/licenses/by-nc-sa/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-sa/3.0/ (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
- Funders
- National Research Foundation
- École Polytechnique Fédérale de Lausanne
- Sungkyunkwan University
- Ministry of Knowledge Economy (20103020010010)
- National Research Foundation of Korea
- King Abdullah University of Science and Technology (KUS-C1-015-21)
- Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
- Korea Institute of Energy Technology Evaluation and Planning
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
- MeSH terms
- Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.