Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Lin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Self-citation
Cited by
Items 601–700 of 1,016
Chen, H.-W., Sakai, N., Ikegami, M., & Miyasaka, T. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502429u · Cited by 304
Synthesis, properties, and optical applications of low-dimensional perovskites
Zhang, Y., Liu, J., Wang, Z., Xue, Y., Ou, Q., Polavarapu, L., Zheng, J., Qi, X., & Bao, Q. (2016) · Chemical Communications · doi:10.1039/c6cc06425f · Cited by 303
Fundamental Efficiency Limit of Lead Iodide Perovskite Solar Cells
Pazos-Outón, L. M., Xiao, T. P., & Yablonovitch, E. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b03054 · Cited by 305
Coherent Nanotwins and Dynamic Disorder in Cesium Lead Halide Perovskite Nanocrystals
Bertolotti, F., Protesescu, L., Kovalenko, M. V., Yakunin, S., Cervellino, A., Billinge, S. J. L., Terban, M. W., Pedersen, J. S., Masciocchi, N., & Guagliardi, A. (2017) · ACS Nano · doi:10.1021/acsnano.7b00017 · Cited by 302
High‐Performance Single‐Crystalline Perovskite Thin‐Film Photodetector
Yang, Z., Deng, Y., Zhang, X., Wang, S., Chen, H., Yang, S., Khurgin, J., Fang, N. X., Zhang, X., & Ma, R. (2018) · Advanced Materials · doi:10.1002/adma.201704333 · Cited by 301
Lessons learned: how to report XPS data incorrectly about lead-halide perovskites
Li, C., Zhang, N., & Gao, P. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00574g · Cited by 295
Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites
Wei, Z., Yan, K., Chen, H., Yi, Y., Zhang, T., Long, X., Li, J., Zhang, L., Wang, J., & Yang, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01983k · Cited by 299
Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?
Cao, D. H., Stoumpos, C. C., Malliakas, C. D., Katz, M. J., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2014) · APL Materials · doi:10.1063/1.4895038 · Cited by 297
Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency
Yoon, H., Kang, S. M., Lee, J.-K., & Choi, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01037g · Cited by 302
Xie, H., Hao, S., Bao, J., Slade, T. J., Snyder, G. J., Wolverton, C., & Kanatzidis, M. G. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c03427 · Cited by 298
Magnetic field effects in hybrid perovskite devices
Zhang, C., Sun, D., Sheng, C.-X., Zhai, Y. X., Mielczarek, K., Zakhidov, A., & Vardeny, Z. V. (2015) · Nature Physics · doi:10.1038/nphys3277 · Cited by 301
Song, Z., Watthage, S. C., Phillips, A. B., & Heben, M. J. (2016) · Journal of Photonics for Energy · doi:10.1117/1.jpe.6.022001 · Cited by 297
“2(a)] was formed by replacing the liquid electrolyte with a solid-state hole conductor.(25,26) This advance”
BackgroundInfluentialChen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Self-citationChoi, J. J., Yang, X., Norman, Z. M., Billinge, S. J. L., & Owen, J. S. (2014) · Nano Letters · doi:10.1021/nl403514x · Cited by 298
Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review
Ren, G., Han, W., Deng, Y., Wu, W., Li, Z., Guo, J., Bao, H., Liu, C., & Guo, W. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11564a · Cited by 294
Cao, K., Zuo, Z., Cui, J., Shen, Y., Moehl, T., Zakeeruddin, S. M., Grätzel, M., & Wang, M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.009 · Cited by 296
Self-citationUnveiling the Role of tBP–LiTFSI Complexes in Perovskite Solar Cells
Wang, S., Huang, Z., Wang, X., Li, Y., Günther, M., Valenzuela, S., Parikh, P., Cabreros, A., Xiong, W., & Meng, Y. S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09809 · Cited by 292
Ru, P., Bi, E., Zhang, Y., Wang, Y., Kong, W., Sha, Y., Tang, W., Zhang, P., Wu, Y., Chen, W., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903487 · Cited by 298
Metal halide perovskite nanomaterials: synthesis and applications
Ha, S.-T., Su, R., Xing, J., Zhang, Q., & Xiong, Q. (2017) · Chemical Science · doi:10.1039/c6sc04474c · Cited by 293
Strain in perovskite solar cells: origins, impacts and regulation
Wu, J., Liu, S.-C., Li, Z., Wang, S., Xue, D.-J., Lin, Y., & Hu, J.-S. (2021) · National Science Review · doi:10.1093/nsr/nwab047 · Cited by 293
“Metal halide perovskites have the general formula ABX3 [37,38], where A is a monovalent cation, such as organic methylammonium (MA, CH3NH3+) [39,40] or formamidinium (FA, (NH2)2CH+) [7,41], and inorganic cesium or rubidium ion; B is a divalent metal cation, including Pb2+, Sn2+ or Ge2+; andX is amixture of halogen ani…”
BackgroundThe role of grain boundaries in perovskite solar cells
Lee, J.-W., Bae, S.-H., De Marco, N., Hsieh, Y.-T., Dai, Z., & Yang, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.07.014 · Cited by 292
“With an important milestone in 2012 by introducing the solid-state version of PVSK solar cells, great attention has been focused on PVSK solar cells [3,4] yielding a certified power conversion efficiency (PCE) of 22.”
BackgroundBand alignment of the hybrid halide perovskites CH3NH3PbCl3, CH3NH3PbBr3and CH3NH3PbI3
Butler, K. T., Frost, J. M., & Walsh, A. (2015) · Materials Horizons · doi:10.1039/c4mh00174e · Cited by 287
Wakamiya, A., Endo, M., Sasamori, T., Tokitoh, N., Ogomi, Y., Hayase, S., & Murata, Y. (2014) · Chemistry Letters · doi:10.1246/cl.140074 · Cited by 293
Tan, K. W., Moore, D. T., Saliba, M., Sai, H., Estroff, L. A., Hanrath, T., Snaith, H. J., & Wiesner, U. (2014) · ACS Nano · doi:10.1021/nn500526t · Cited by 293
“erties in the near-infrared spectrum to generate charge carriers.(10,12,13,18) Moreover,”
BackgroundMethodQin, P., Yang, G., Ren, Z., Cheung, S. H., So, S. K., Chen, L., Hao, J., Hou, J., & Li, G. (2018) · Advanced Materials · doi:10.1002/adma.201706126 · Cited by 293
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Stability of all-inorganic perovskite solar cells
Ouedraogo, N. A. N., Chen, Y., Xiao, Y. Y., Meng, Q., Han, C. B., Yan, H., & Zhang, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104249 · Cited by 291
You, S., Eickemeyer, F. T., Gao, J., Yum, J.-H., Zheng, X., Ren, D., Xia, M., Guo, R., Rong, Y., Zakeeruddin, S. M., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01249-0 · Cited by 286
Self-citationEffects of organic cations on the defect physics of tin halide perovskites
Shi, T., Zhang, H.-S., Meng, W., Teng, Q., Liu, M., Yang, X., Yan, Y., Yip, H.-L., & Zhao, Y.-J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02662e · Cited by 292
Lead‐Free Double Perovskites for Perovskite Solar Cells
Kung, P.-K., Li, M.-H., Lin, P.-Y., Jhang, J.-Y., Pantaler, M., Lupascu, D. C., Grancini, G., & Chen, P. (2020) · Solar RRL · doi:10.1002/solr.201900306 · Cited by 290
Sepalage, G. A., Meyer, S., Pascoe, A., Scully, A. D., Huang, F., Bach, U., Cheng, Y., & Spiccia, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502541 · Cited by 290
Chen, W.-Y., Deng, L.-L., Dai, S.-M., Wang, X., Tian, C.-B., Zhan, X.-X., Xie, S.-Y., Huang, R.-B., & Zheng, L.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05286f · Cited by 290
Zhou, H., Shi, Y., Dong, Q., Zhang, H., Xing, Y., Wang, K., Du, Y., & Ma, T. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5017069 · Cited by 290
Encapsulation of Organic and Perovskite Solar Cells: A Review
Uddin, A., Upama, M. B., Yi, H., & Duan, L. (2019) · Coatings · doi:10.3390/coatings9020065 · Cited by 290
“In most of the researches on stability, the stability tests were reported after the devices being stored in the ambient or dark with measurements of the device performance at regular intervals [52,54,55,60].”
BackgroundMetal Halide Perovskites for High‐Energy Radiation Detection
Kakavelakis, G., Gedda, M., Panagiotopoulos, A., Kymakis, E., Anthopoulos, T. D., & Petridis, K. (2020) · Advanced Science · doi:10.1002/advs.202002098 · Cited by 286
Horváth, E., Spina, M., Szekrényes, Z., Kamarás, K., Gaal, R., Gachet, D., & Forró, L. (2014) · Nano Letters · doi:10.1021/nl5020684 · Cited by 285
Stabilized Wide Bandgap MAPbBrxI3–x Perovskite by Enhanced Grain Size and Improved Crystallinity
Hu, M., Bi, C., Yuan, Y., Bai, Y., & Huang, J. (2016) · Advanced Science · doi:10.1002/advs.201500301 · Cited by 288
Depletion region effect of highly efficient hole conductor free CH3NH3PbI3perovskite solar cells
Aharon, S., Gamliel, S., Cohen, B. E., & Etgar, L. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00460d · Cited by 285
Computational Screening of Homovalent Lead Substitution in Organic–Inorganic Halide Perovskites
Filip, M. R., & Giustino, F. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11845 · Cited by 283
Broadly tunable metal halide perovskites for solid-state light-emission applications
Adjokatse, S., Fang, H.-H., & Loi, M. A. (2017) · Materials Today · doi:10.1016/j.mattod.2017.03.021 · Cited by 286
He, X., Qiu, Y., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201700775 · Cited by 285
Zhou, Y., Herz, L. M., Jen, A. K.-Y., & Saliba, M. (2022) · Nature Energy · doi:10.1038/s41560-022-01096-5 · Cited by 281
“7g, one possible scenario for the degradation mode follows two steps: (1) O2 adsorption by MHP surfaces and (2) O2 penetration via GBs that feature a high degree of disorder in their pristine states.”
BackgroundMethodFast and Sensitive Solution‐Processed Visible‐Blind Perovskite UV Photodetectors
Adinolfi, V., Ouellette, O., Saidaminov, M. I., Walters, G., Abdelhady, A. L., Bakr, O. M., & Sargent, E. H. (2016) · Advanced Materials · doi:10.1002/adma.201601196 · Cited by 285
Carbon-Based CsPbBr3 Perovskite Solar Cells: All-Ambient Processes and High Thermal Stability
Chang, X., Li, W., Zhu, L., Liu, H., Geng, H., Xiang, S., Liu, J., & Chen, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11393 · Cited by 285
High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Koushik, D., Verhees, W. J. H., Kuang, Y., Veenstra, S., Zhang, D., Verheijen, M. A., Creatore, M., & Schropp, R. E. I. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02687g · Cited by 285
Richter, J. M., Branchi, F., Valduga de Almeida Camargo, F., Zhao, B., Friend, R. H., Cerullo, G., & Deschler, F. (2017) · Nature Communications · doi:10.1038/s41467-017-00546-z · Cited by 288
Metal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells
Shin, S. S., Lee, S. J., & Seok, S. I. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900455 · Cited by 283
Qiu, L., Ono, L. K., & Qi, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.09.008 · Cited by 286
A Review on Scaling Up Perovskite Solar Cells
Li, D., Zhang, D., Lim, K., Hu, Y., Rong, Y., Mei, A., Park, N., & Han, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008621 · Cited by 284
Self-citationLi, N., Luo, Y., Chen, Z., Niu, X., Zhang, X., Lu, J., Kumar, R., Jiang, J., Liu, H., Guo, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.06.005 · Cited by 281
Chloride in Lead Chloride-Derived Organo-Metal Halides for Perovskite-Absorber Solar Cells
Unger, E. L., Bowring, A. R., Tassone, C. J., Pool, V. L., Gold-Parker, A., Cheacharoen, R., Stone, K. H., Hoke, E. T., Toney, M. F., & McGehee, M. D. (2014) · Chemistry of Materials · doi:10.1021/cm503828b · Cited by 281
Stoumpos, C. C., Mao, L., Malliakas, C. D., & Kanatzidis, M. G. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02764 · Cited by 282
Impact of Interfacial Layers in Perovskite Solar Cells
Cho, A., & Park, N. (2017) · ChemSusChem · doi:10.1002/cssc.201701095 · Cited by 281
Self-citationImpacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells
Chen, Y., Li, N., Wang, L., Li, L., Xu, Z., Jiao, H., Liu, P., Zhu, C., Zai, H., Sun, M., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09093-1 · Cited by 277
High efficiency perovskite solar cells: from complex nanostructure to planar heterojunction
He, M., Zheng, D., Wang, M., Lin, C., & Lin, Z. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14160h · Cited by 281
Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells
Bi, D., Boschloo, G., Schwarzmüller, S., Yang, L., Johansson, E. M. J., & Hagfeldt, A. (2013) · Nanoscale · doi:10.1039/c3nr01542d · Cited by 281
Zhang, F., Yang, X., Wang, H., Cheng, M., Zhao, J., & Sun, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504175x · Cited by 282
Understanding Quantum Confinement of Charge Carriers in Layered 2D Hybrid Perovskites
Even, J., Pedesseau, L., & Katan, C. (2014) · ChemPhysChem · doi:10.1002/cphc.201402428 · Cited by 283
Lanzetta, L., Marin-Beloqui, J. M., Sanchez-Molina, I., Ding, D., & Haque, S. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00414 · Cited by 281
Highly Air-Stable Carbon-Based α-CsPbI3 Perovskite Solar Cells with a Broadened Optical Spectrum
Xiang, S., Fu, Z., Li, W., Wei, Y., Liu, J., Liu, H., Zhu, L., Zhang, R., & Chen, H. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00820 · Cited by 280
Kim, G., Choi, H., Kim, M., Lee, J., Son, S. Y., & Park, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903403 · Cited by 278
PTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review
Wang, Y., Duan, L., Zhang, M., Hameiri, Z., Liu, X., Bai, Y., & Hao, X. (2022) · Solar RRL · doi:10.1002/solr.202200234 · Cited by 277
Bi, D., Xu, B., Gao, P., Sun, L., Grätzel, M., & Hagfeldt, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.020 · Cited by 279
Self-citationHole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Anomalous Alloy Properties in Mixed Halide Perovskites
Yin, W.-J., Yan, Y., & Wei, S.-H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501896w · Cited by 278
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Self-citationYang, B., Dyck, O., Poplawsky, J., Keum, J., Puretzky, A., Das, S., Ivanov, I., Rouleau, C., Duscher, G., Geohegan, D., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03144 · Cited by 277
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Liu, B., Bi, H., He, D., Bai, L., Wang, W., Yuan, H., Song, Q., Su, P., Zang, Z., Zhou, T., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00794 · Cited by 276
Formation of Thin Films of Organic–Inorganic Perovskites for High‐Efficiency Solar Cells
Stranks, S. D., Nayak, P. K., Zhang, W., Stergiopoulos, T., & Snaith, H. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410214 · Cited by 274
Zheng, L., Chung, Y.-H., Ma, Y., Zhang, L., Xiao, L., Chen, Z., Wang, S., Qu, B., & Gong, Q. (2014) · Chem. Commun. · doi:10.1039/c4cc04680c · Cited by 275
Large-area perovskite solar cells – a review of recent progress and issues
Chen, Y., Zhang, L., Zhang, Y., Gao, H., & Yan, H. (2018) · RSC Advances · doi:10.1039/c8ra00384j · Cited by 269
Shape Evolution and Single Particle Luminescence of Organometal Halide Perovskite Nanocrystals
Zhu, F., Men, L., Guo, Y., Zhu, Q., Bhattacharjee, U., Goodwin, P. M., Petrich, J. W., Smith, E. A., & Vela, J. (2015) · ACS Nano · doi:10.1021/nn507020s · Cited by 276
Yan, K., Wei, Z., Li, J., Chen, H., Yi, Y., Zheng, X., Long, X., Wang, Z., Wang, J., Xu, J., et al. (2015) · Small · doi:10.1002/smll.201403348 · Cited by 271
Ma, F., Li, J., Li, W., Lin, N., Wang, L., & Qiao, J. (2017) · Chemical Science · doi:10.1039/c6sc03542f · Cited by 269
The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Exciton Binding Energy and the Nature of Emissive States in Organometal Halide Perovskites
Zheng, K., Zhu, Q., Abdellah, M., Messing, M. E., Zhang, W., Generalov, A., Niu, Y., Ribaud, L., Canton, S. E., & Pullerits, T. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01252 · Cited by 268
Wang, Q., Zhang, X., Jin, Z., Zhang, J., Gao, Z., Li, Y., & Liu, S. F. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00375 · Cited by 270
Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite
Tang, Z., Bessho, T., Awai, F., Kinoshita, T., Maitani, M. M., Jono, R., Murakami, T. N., Wang, H., Kubo, T., Uchida, S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-12436-x · Cited by 272
Inversion symmetry and bulk Rashba effect in methylammonium lead iodide perovskite single crystals
Frohna, K., Deshpande, T., Harter, J., Peng, W., Barker, B. A., Neaton, J. B., Louie, S. G., Bakr, O. M., Hsieh, D., & Bernardi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-04212-w · Cited by 273
Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Zhou, T., Lai, H., Liu, T., Lu, D., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901242 · Cited by 272
Rubidium Fluoride Modified SnO2 for Planar n‐i‐p Perovskite Solar Cells
Zhuang, J., Mao, P., Luan, Y., Chen, N., Cao, X., Niu, G., Jia, F., Wang, F., Cao, S., & Wang, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010385 · Cited by 272
Zhang, F., Yang, X., Cheng, M., Wang, W., & Sun, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.11.034 · Cited by 270
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
Ma, J., & Wang, L.-W. (2015) · Nano Letters · doi:10.1021/nl503494y · Cited by 270
Juarez-Perez, E. J., Leyden, M. R., Wang, S., Ono, L. K., Hawash, Z., & Qi, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01777 · Cited by 270
Less is More: Dopant‐Free Hole Transporting Materials for High‐Efficiency Perovskite Solar Cells
Zhou, W., Wen, Z., & Gao, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702512 · Cited by 270
Solution‐Processed Tin‐Based Perovskite for Near‐Infrared Lasing
Xing, G., Kumar, M. H., Chong, W. K., Liu, X., Cai, Y., Ding, H., Asta, M., Grätzel, M., Mhaisalkar, S., Mathews, N., et al. (2016) · Advanced Materials · doi:10.1002/adma.201601418 · Cited by 269
Self-citationZhao, L., Kerner, R. A., Xiao, Z., Lin, Y. L., Lee, K. M., Schwartz, J., & Rand, B. P. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00320 · Cited by 270
Self-citationLuo, J., Xia, J., Yang, H., Chen, L., Wan, Z., Han, F., Malik, H. A., Zhu, X., & Jia, C. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00036k · Cited by 271
Sun, S., Fang, Y., Kieslich, G., White, T. J., & Cheetham, A. K. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03331d · Cited by 272
Tress, W., Correa Baena, J. P., Saliba, M., Abate, A., & Graetzel, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600396 · Cited by 270
Self-citationKe, W., Mao, L., Stoumpos, C. C., Hoffman, J., Spanopoulos, I., Mohite, A. D., & Kanatzidis, M. G. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803384 · Cited by 269
3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells
Vak, D., Hwang, K., Faulks, A., Jung, Y., Clark, N., Kim, D., Wilson, G. J., & Watkins, S. E. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401539 · Cited by 265
Tin‐ and Lead‐Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective
Serrano‐Lujan, L., Espinosa, N., Larsen‐Olsen, T. T., Abad, J., Urbina, A., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501119 · Cited by 269
Van Le, Q., Jang, H. W., & Kim, S. Y. (2018) · Small Methods · doi:10.1002/smtd.201700419 · Cited by 270
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Heo, J. H., & Im, S. H. (2016) · Advanced Materials · doi:10.1002/adma.201501629 · Cited by 266
Transparent Conductive Oxide‐Free Graphene‐Based Perovskite Solar Cells with over 17% Efficiency
Sung, H., Ahn, N., Jang, M. S., Lee, J., Yoon, H., Park, N., & Choi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501873 · Cited by 263
Self-citationLayer-by-Layer Degradation of Methylammonium Lead Tri-iodide Perovskite Microplates
Fan, Z., Xiao, H., Wang, Y., Zhao, Z., Lin, Z., Cheng, H.-C., Lee, S.-J., Wang, G., Feng, Z., Goddard, W. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.005 · Cited by 271
Metadata
- Authors
- Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
- Affiliations
- Sungkyunkwan University (KR)
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Park, Nam-Gyu
- Venue
- Scientific Reports
- Published
- 2012-08-21
- Volume
- 2
- Issue
- 1
- Pages
- 591-591
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3423636
- OpenAlex
- W2169328609
- Semantic Scholar
- 84c7f2dcb014acfa2e3da9bab0f390e859735a06
- Cited by
- 8,092
- References
- 27
- Citations by year
- 2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
- FWCI
- 244.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-sa
- creativecommons.org/licenses/by-nc-sa/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-sa/3.0/ (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
- Funders
- National Research Foundation
- École Polytechnique Fédérale de Lausanne
- Sungkyunkwan University
- Ministry of Knowledge Economy (20103020010010)
- National Research Foundation of Korea
- King Abdullah University of Science and Technology (KUS-C1-015-21)
- Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
- Korea Institute of Energy Technology Evaluation and Planning
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
- MeSH terms
- Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.