Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Lin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Self-citation
Cited by
Items 201–300 of 1,016
Interface energetics in organo-metal halide perovskite-based photovoltaic cells
Schulz, P., Edri, E., Kirmayer, S., Hodes, G., Cahen, D., & Kahn, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00168k · Cited by 710
Price, M. B., Butkus, J., Jellicoe, T. C., Sadhanala, A., Briane, A., Halpert, J. E., Broch, K., Hodgkiss, J. M., Friend, R. H., & Deschler, F. (2015) · Nature Communications · doi:10.1038/ncomms9420 · Cited by 704
“Since the first reports of high photovoltaic efficiencies 1,2 in 2012, solar cells with over 20% power conversion efficiency have been obtained 3,4 , along with light-emitting diodes 5 and optically pumped lasing structures 6–8 .”
11% Efficient Perovskite Solar Cell Based on ZnO Nanorods: An Effective Charge Collection System
Son, D.-Y., Im, J.-H., Kim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp412407j · Cited by 701
Self-citationBifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Conings, B., Baeten, L., De Dobbelaere, C., D'Haen, J., Manca, J., & Boyen, H. (2014) · Advanced Materials · doi:10.1002/adma.201304803 · Cited by 691
High-efficiency robust perovskite solar cells on ultrathin flexible substrates
Li, Y., Meng, L., Yang, Y., Xu, G., Hong, Z., Chen, Q., You, J., Li, G., Yang, Y., & Li, Y. (2016) · Nature Communications · doi:10.1038/ncomms10214 · Cited by 680
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Self-citationLi, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Stable high efficiency two-dimensional perovskite solar cells via cesium doping
Zhang, X., Ren, X., Liu, B., Munir, R., Zhu, X., Yang, D., Li, J., Liu, Y., Smilgies, D.-M., Li, R., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01145h · Cited by 678
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
A polymer scaffold for self-healing perovskite solar cells
Zhao, Y., Wei, J., Li, H., Yan, Y., Zhou, W., Yu, D., & Zhao, Q. (2016) · Nature Communications · doi:10.1038/ncomms10228 · Cited by 667
“(c) Schematic diagram to show mechanisms for the self-healing properties in PPSCs: (1) Water absorb on perovskite; (2) Perovskite hydrolysis into”
BackgroundLi, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Meng, L., You, J., Guo, T.-F., & Yang, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00404 · Cited by 659
Review on the Application of SnO2 in Perovskite Solar Cells
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802757 · Cited by 653
Advances in Perovskite Solar Cells
Zuo, C., Bolink, H. J., Han, H., Huang, J., Cahen, D., & Ding, L. (2016) · Advanced Science · doi:10.1002/advs.201500324 · Cited by 654
Slow Dynamic Processes in Lead Halide Perovskite Solar Cells. Characteristic Times and Hysteresis
Sanchez, R. S., Gonzalez-Pedro, V., Lee, J.-W., Park, N.-G., Kang, Y. S., Mora-Sero, I., & Bisquert, J. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5011187 · Cited by 665
Self-citationQuantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells
Yao, J., Kirchartz, T., Vezie, M. S., Faist, M. A., Gong, W., He, Z., Wu, H., Troughton, J., Watson, T., Bryant, D., et al. (2015) · Physical Review Applied · doi:10.1103/physrevapplied.4.014020 · Cited by 657
Li, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Self-citationHigh performance hybrid solar cells sensitized by organolead halide perovskites
Cai, B., Xing, Y., Yang, Z., Zhang, W.-H., & Qiu, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40343b · Cited by 655
Role of the Selective Contacts in the Performance of Lead Halide Perovskite Solar Cells
Juarez-Perez, E. J., Wuβler, M., Fabregat-Santiago, F., Lakus-Wollny, K., Mankel, E., Mayer, T., Jaegermann, W., & Mora-Sero, I. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500059v · Cited by 650
Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells
Kumar, M. H., Yantara, N., Dharani, S., Graetzel, M., Mhaisalkar, S., Boix, P. P., & Mathews, N. (2013) · Chemical Communications · doi:10.1039/c3cc46534a · Cited by 650
Self-citationZhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Self-citationWu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
“As the signals of PCBM fragments are very weak in mass spectroscopy, we used a thiophene-containing fullerene derivative ThCBM ([6,6]-(2-thienyl)-C61-butyric acid methyl ester) instead of PCBM for this portion of study.”
BackgroundMethodInfluentialWang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Abrusci, A., Stranks, S. D., Docampo, P., Yip, H.-L., Jen, A. K.-Y., & Snaith, H. J. (2013) · Nano Letters · doi:10.1021/nl401044q · Cited by 640
Hossain, M. K., Toki, G. F. I., Kuddus, A., Rubel, M. H. K., Hossain, M. M., Bencherif, H., Rahman, M. F., Islam, M. R., & Mushtaq, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-28506-2 · Cited by 629
Brivio, F., Walker, A. B., & Walsh, A. (2013) · APL Materials · doi:10.1063/1.4824147 · Cited by 636
Extrinsic ion migration in perovskite solar cells
Li, Z., Xiao, C., Yang, Y., Harvey, S. P., Kim, D. H., Christians, J. A., Yang, M., Schulz, P., Nanayakkara, S. U., Jiang, C.-S., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00358g · Cited by 631
Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Yang, J., Siempelkamp, B. D., Mosconi, E., De Angelis, F., & Kelly, T. L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01598 · Cited by 629
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Ambipolar solution-processed hybrid perovskite phototransistors
Li, F., Ma, C., Wang, H., Hu, W., Yu, W., Sheikh, A. D., & Wu, T. (2015) · Nature Communications · doi:10.1038/ncomms9238 · Cited by 629
“Furthermore, according to equation (3), reducing the channel length (L) is a straightforward way to improve the performance of phototransistors.”
BackgroundMolecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Perovskites for Light Emission
Quan, L. N., García de Arquer, F. P., Sabatini, R. P., & Sargent, E. H. (2018) · Advanced Materials · doi:10.1002/adma.201801996 · Cited by 620
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
Huang, H., Susha, A. S., Kershaw, S. V., Hung, T. F., & Rogach, A. L. (2015) · Advanced Science · doi:10.1002/advs.201500194 · Cited by 617
Li, W., Zhang, W., Van Reenen, S., Sutton, R. J., Fan, J., Haghighirad, A. A., Johnston, M. B., Wang, L., & Snaith, H. J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03522h · Cited by 615
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Rehman, W., McMeekin, D. P., Patel, J. B., Milot, R. L., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03014a · Cited by 612
Weller, M. T., Weber, O. J., Henry, P. F., Di Pumpo, A. M., & Hansen, T. C. (2015) · Chemical Communications · doi:10.1039/c4cc09944c · Cited by 614
Park, S., Chang, W. J., Lee, C. W., Park, S., Ahn, H.-Y., & Nam, K. T. (2016) · Nature Energy · doi:10.1038/nenergy.2016.185 · Cited by 610
Self-citationTrapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Cesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells
Chen, M., Ju, M.-G., Carl, A. D., Zong, Y., Grimm, R. L., Gu, J., Zeng, X. C., Zhou, Y., & Padture, N. P. (2018) · Joule · doi:10.1016/j.joule.2018.01.009 · Cited by 607
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Correlated electron–hole plasma in organometal perovskites
Saba, M., Cadelano, M., Marongiu, D., Chen, F., Sarritzu, V., Sestu, N., Figus, C., Aresti, M., Piras, R., Geddo Lehmann, A., et al. (2014) · Nature Communications · doi:10.1038/ncomms6049 · Cited by 603
“We solved the rate (equations (2) and (3)) for the carrier population and the PL, in which we included (i) the radiative recombination rate taken from equation (2), (ii) the electron–hole annihilation rate via non-radiative Auger processes, proportional to gn3 and (iii) a monomolecular decay ktn to describe carrier tr…”
MethodPerovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Enhancement of Perovskite-Based Solar Cells Employing Core–Shell Metal Nanoparticles
Zhang, W., Saliba, M., Stranks, S. D., Sun, Y., Shi, X., Wiesner, U., & Snaith, H. J. (2013) · Nano Letters · doi:10.1021/nl4024287 · Cited by 598
Di Giacomo, F., Zardetto, V., D'Epifanio, A., Pescetelli, S., Matteocci, F., Razza, S., Di Carlo, A., Licoccia, S., Kessels, W. M. M., Creatore, M., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401808 · Cited by 595
The efficiency limit of CH3NH3PbI3 perovskite solar cells
Sha, W. E. I., Ren, X., Chen, L., & Choy, W. C. H. (2015) · Applied Physics Letters · doi:10.1063/1.4922150 · Cited by 571
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016) · Nature Communications · doi:10.1038/ncomms11105 · Cited by 590
“This phenomenon can be understood by the following reasons29: (1) the perovskite layer is too thick to have efficient charge separation; (2) the poor contact between crystals in the perovskite film may hamper the charge transport process; and (3) the rough surface of the perovskite film may cause an incomplete coverag…”
BackgroundBulk crystal growth of hybrid perovskite material CH3NH3PbI3
Dang, Y., Liu, Y., Sun, Y., Yuan, D., Liu, X., Lu, W., Liu, G., Xia, H., & Tao, X. (2015) · CrystEngComm · doi:10.1039/c4ce02106a · Cited by 590
Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency
Wojciechowski, K., Saliba, M., Leijtens, T., Abate, A., & Snaith, H. J. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43707h · Cited by 592
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Han, T.-H., Lee, J.-W., Choi, C., Tan, S., Lee, C., Zhao, Y., Dai, Z., De Marco, N., Lee, S.-J., Bae, S.-H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08455-z · Cited by 588
Self-citationHao, M., Bai, Y., Zeiske, S., Ren, L., Liu, J., Yuan, Y., Zarrabi, N., Cheng, N., Ghasemi, M., Chen, P., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0535-7 · Cited by 587
Ito, S., Tanaka, S., Manabe, K., & Nishino, H. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500449z · Cited by 585
Stabilizing heterostructures of soft perovskite semiconductors
Wang, Y., Wu, T., Barbaud, J., Kong, W., Cui, D., Chen, H., Yang, X., & Han, L. (2019) · Science · doi:10.1126/science.aax8018 · Cited by 585
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Formamidinium tin-based perovskite with low Eg for photovoltaic applications
Koh, T. M., Krishnamoorthy, T., Yantara, N., Shi, C., Leong, W. L., Boix, P. P., Grimsdale, A. C., Mhaisalkar, S. G., & Mathews, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00190k · Cited by 576
Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%
Cui, P., Wei, D., Ji, J., Huang, H., Jia, E., Dou, S., Wang, T., Wang, W., & Li, M. (2019) · Nature Energy · doi:10.1038/s41560-018-0324-8 · Cited by 573
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Edri, E., Kirmayer, S., Henning, A., Mukhopadhyay, S., Gartsman, K., Rosenwaks, Y., Hodes, G., & Cahen, D. (2014) · Nano Letters · doi:10.1021/nl404454h · Cited by 564
NH2CH═NH2PbI3: An Alternative Organolead Iodide Perovskite Sensitizer for Mesoscopic Solar Cells
Pang, S., Hu, H., Zhang, J., Lv, S., Yu, Y., Wei, F., Qin, T., Xu, H., Liu, Z., & Cui, G. (2014) · Chemistry of Materials · doi:10.1021/cm404006p · Cited by 580
Lead-Free MA2CuClxBr4–x Hybrid Perovskites
Cortecchia, D., Dewi, H. A., Yin, J., Bruno, A., Chen, S., Baikie, T., Boix, P. P., Grätzel, M., Mhaisalkar, S., Soci, C., et al. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01896 · Cited by 574
Self-citationHigh efficiency flexible perovskite solar cells using superior low temperature TiO2
Yang, D., Yang, R., Zhang, J., Yang, Z., (Frank) Liu, S., & Li, C. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02155c · Cited by 570
Wang, L., McCleese, C., Kovalsky, A., Zhao, Y., & Burda, C. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504632z · Cited by 571
Rethinking the A cation in halide perovskites
Lee, J.-W., Tan, S., Seok, S. I., Yang, Y., & Park, N.-G. (2022) · Science · doi:10.1126/science.abj1186 · Cited by 557
“on the left figure indicate the two reorientation modes: (1) methyl and/or ammonium rotation around the”
BackgroundSelf-citationEdri, E., Kirmayer, S., Mukhopadhyay, S., Gartsman, K., Hodes, G., & Cahen, D. (2014) · Nature Communications · doi:10.1038/ncomms4461 · Cited by 566
Temperature-dependent excitonic photoluminescence of hybrid organometal halide perovskite films
Wu, K., Bera, A., Ma, C., Du, Y., Yang, Y., Li, L., & Wu, T. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp03573a · Cited by 564
Metal halide perovskite tandem and multiple-junction photovoltaics
Eperon, G. E., Hörantner, M. T., & Snaith, H. J. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0095 · Cited by 556
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Qiu, X., Cao, B., Yuan, S., Chen, X., Qiu, Z., Jiang, Y., Ye, Q., Wang, H., Zeng, H., Liu, J., et al. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.09.022 · Cited by 556
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
De Marco, N., Zhou, H., Chen, Q., Sun, P., Liu, Z., Meng, L., Yao, E.-P., Liu, Y., Schiffer, A., & Yang, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04060 · Cited by 564
Savenije, T. J., Ponseca, C. S., Kunneman, L., Abdellah, M., Zheng, K., Tian, Y., Zhu, Q., Canton, S. E., Scheblykin, I. G., Pullerits, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500858a · Cited by 558
Yang, T., Gregori, G., Pellet, N., Grätzel, M., & Maier, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500014 · Cited by 553
Self-citationZhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502696w · Cited by 555
Even, J., Pedesseau, L., & Katan, C. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp503337a · Cited by 556
Bismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells
Hu, Y., Bai, F., Liu, X., Ji, Q., Miao, X., Qiu, T., & Zhang, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00508 · Cited by 547
Dye-sensitized solar cells strike back
Muñoz-García, A. B., Benesperi, I., Boschloo, G., Concepcion, J. J., Delcamp, J. H., Gibson, E. A., Meyer, G. J., Pavone, M., Pettersson, H., Hagfeldt, A., et al. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01336f · Cited by 544
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Roy, P., Kumar Sinha, N., Tiwari, S., & Khare, A. (2020) · Solar Energy · doi:10.1016/j.solener.2020.01.080 · Cited by 541
Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells
Choi, H., Jeong, J., Kim, H.-B., Kim, S., Walker, B., Kim, G.-H., & Kim, J. Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.04.017 · Cited by 544
Self-citationJošt, M., Kegelmann, L., Korte, L., & Albrecht, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904102 · Cited by 538
The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?
Wang, Y., Liu, X., Zhang, T., Wang, X., Kan, M., Shi, J., & Zhao, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201910800 · Cited by 546
Almora, O., Aranda, C., Mas-Marzá, E., & Garcia-Belmonte, G. (2016) · Applied Physics Letters · doi:10.1063/1.4966127 · Cited by 543
Yang, M., Zhang, T., Schulz, P., Li, Z., Li, G., Kim, D. H., Guo, N., Berry, J. J., Zhu, K., & Zhao, Y. (2016) · Nature Communications · doi:10.1038/ncomms12305 · Cited by 540
“The results are similar to that obtained from the highconcentration MABr spin-coating treatment with evidences pointing to (1) substantial Br incorporation, (2) no drastic enhanced grain size and (3) significant pinhole formation, suggesting that the I/Br exchange reaction dominates during the dipping treatment.”
High Open-Circuit Voltage Solar Cells Based on Organic–Inorganic Lead Bromide Perovskite
Edri, E., Kirmayer, S., Cahen, D., & Hodes, G. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400348q · Cited by 541
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10614 · Cited by 539
Triarylamine: Versatile Platform for Organic, Dye-Sensitized, and Perovskite Solar Cells
Wang, J., Liu, K., Ma, L., & Zhan, X. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00432 · Cited by 536
Efficient Semitransparent Perovskite Solar Cells with Graphene Electrodes
You, P., Liu, Z., Tai, Q., Liu, S., & Yan, F. (2015) · Advanced Materials · doi:10.1002/adma.201501145 · Cited by 536
Deng, Y., Van Brackle, C. H., Dai, X., Zhao, J., Chen, B., & Huang, J. (2019) · Science Advances · doi:10.1126/sciadv.aax7537 · Cited by 535
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Sadhanala, A., Ahmad, S., Zhao, B., Giesbrecht, N., Pearce, P. M., Deschler, F., Hoye, R. L. Z., Gödel, K. C., Bein, T., Docampo, P., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02369 · Cited by 533
Protesescu, L., Yakunin, S., Kumar, S., Bär, J., Bertolotti, F., Masciocchi, N., Guagliardi, A., Grotevent, M., Shorubalko, I., Bodnarchuk, M. I., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b00116 · Cited by 534
Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Metadata
- Authors
- Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
- Affiliations
- Sungkyunkwan University (KR)
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Park, Nam-Gyu
- Venue
- Scientific Reports
- Published
- 2012-08-21
- Volume
- 2
- Issue
- 1
- Pages
- 591-591
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3423636
- OpenAlex
- W2169328609
- Semantic Scholar
- 84c7f2dcb014acfa2e3da9bab0f390e859735a06
- Cited by
- 8,092
- References
- 27
- Citations by year
- 2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
- FWCI
- 244.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-sa
- creativecommons.org/licenses/by-nc-sa/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-sa/3.0/ (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
- Funders
- National Research Foundation
- École Polytechnique Fédérale de Lausanne
- Sungkyunkwan University
- Ministry of Knowledge Economy (20103020010010)
- National Research Foundation of Korea
- King Abdullah University of Science and Technology (KUS-C1-015-21)
- Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
- Korea Institute of Energy Technology Evaluation and Planning
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
- MeSH terms
- Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.