Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Lin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Self-citation
Cited by
Items 701–800 of 1,016
Zhuang, J., Mao, P., Luan, Y., Yi, X., Tu, Z., Zhang, Y., Yi, Y., Wei, Y., Chen, N., Lin, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02375 · Cited by 266
Research Direction toward Scalable, Stable, and High Efficiency Perovskite Solar Cells
Park, N. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903106 · Cited by 268
Self-citationQuantum-Dot-Sensitized Solar Cell with Unprecedentedly High Photocurrent
Lee, J.-W., Son, D.-Y., Ahn, T. K., Shin, H.-W., Kim, I. Y., Hwang, S.-J., Ko, M. J., Sul, S., Han, H., & Park, N.-G. (2013) · Scientific Reports · doi:10.1038/srep01050 · Cited by 266
Self-citationO’Regan, B. C., Barnes, P. R. F., Li, X., Law, C., Palomares, E., & Marin-Beloqui, J. M. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00761 · Cited by 264
Verification and mitigation of ion migration in perovskite solar cells
Lee, J.-W., Kim, S.-G., Yang, J.-M., Yang, Y., & Park, N.-G. (2019) · APL Materials · doi:10.1063/1.5085643 · Cited by 271
Self-citationControllable design of solid-state perovskite solar cells by SCAPS device simulation
Tan, K., Lin, P., Wang, G., Liu, Y., Xu, Z., & Lin, Y. (2016) · Solid-State Electronics · doi:10.1016/j.sse.2016.09.012 · Cited by 265
Stability Issues on Perovskite Solar Cells
Zhao, X., & Park, N.-G. (2015) · Photonics · doi:10.3390/photonics2041139 · Cited by 262
“Reprinted with permission from reference [4].”
Self-citationCao, J., Liu, Y.-M., Jing, X., Yin, J., Li, J., Xu, B., Tan, Y.-Z., & Zheng, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06493 · Cited by 263
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Zhao, X., Kim, H.-S., Seo, J.-Y., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15673 · Cited by 265
Self-citationHeo, S., Seo, G., Lee, Y., Lee, D., Seol, M., Lee, J., Park, J.-B., Kim, K., Yun, D.-J., Kim, Y. S., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00303j · Cited by 263
The Nature of Ion Conduction in Methylammonium Lead Iodide: A Multimethod Approach
Senocrate, A., Moudrakovski, I., Kim, G. Y., Yang, T., Gregori, G., Grätzel, M., & Maier, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701724 · Cited by 265
Self-citationGrancini, G., Marras, S., Prato, M., Giannini, C., Quarti, C., De Angelis, F., De Bastiani, M., Eperon, G. E., Snaith, H. J., Manna, L., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501877h · Cited by 263
Najafi, L., Taheri, B., Martín-García, B., Bellani, S., Di Girolamo, D., Agresti, A., Oropesa-Nuñez, R., Pescetelli, S., Vesce, L., Calabrò, E., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05514 · Cited by 264
2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells
Ma, C., Leng, C., Ji, Y., Wei, X., Sun, K., Tang, L., Yang, J., Luo, W., Li, C., Deng, Y., et al. (2016) · Nanoscale · doi:10.1039/c6nr04741f · Cited by 259
Feng, J., Yang, Z., Yang, D., Ren, X., Zhu, X., Jin, Z., Zi, W., Wei, Q., & Liu, S. (. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.010 · Cited by 260
Wijeyasinghe, N., Regoutz, A., Eisner, F., Du, T., Tsetseris, L., Lin, Y., Faber, H., Pattanasattayavong, P., Li, J., Yan, F., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701818 · Cited by 261
Consolidation of the optoelectronic properties of CH3NH3PbBr3 perovskite single crystals
Wenger, B., Nayak, P. K., Wen, X., Kesava, S. V., Noel, N. K., & Snaith, H. J. (2017) · Nature Communications · doi:10.1038/s41467-017-00567-8 · Cited by 259
“Hence, if we neglect diffusion for longer times, and considering that ni is negligible at room temperature due to the large bandgap of MAPbBr3 np n : i2 np ð Þ, Equation (3) can be simplified as:”
InfluentialThe architecture of the electron transport layer for a perovskite solar cell
Mohamad Noh, M. F., Teh, C. H., Daik, R., Lim, E. L., Yap, C. C., Ibrahim, M. A., Ahmad Ludin, N., Mohd Yusoff, A. R. B., Jang, J., & Mat Teridi, M. A. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc04649a · Cited by 262
Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers
Bi, E., Tang, W., Chen, H., Wang, Y., Barbaud, J., Wu, T., Kong, W., Tu, P., Zhu, H., Zeng, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.030 · Cited by 261
Self-citationJacobsson, T. J., Pazoki, M., Hagfeldt, A., & Edvinsson, T. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06436 · Cited by 260
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
Shalini, S., Balasundaraprabhu, R., Kumar, T. S., Prabavathy, N., Senthilarasu, S., & Prasanna, S. (2016) · International Journal of Energy Research · doi:10.1002/er.3538 · Cited by 255
Mao, L., Tsai, H., Nie, W., Ma, L., Im, J., Stoumpos, C. C., Malliakas, C. D., Hao, F., Wasielewski, M. R., Mohite, A. D., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03054 · Cited by 258
Self-citationThe Physics of Light Emission in Halide Perovskite Devices
Stranks, S. D., Hoye, R. L. Z., Di, D., Friend, R. H., & Deschler, F. (2019) · Advanced Materials · doi:10.1002/adma.201803336 · Cited by 260
Liu, Y., Akin, S., Hinderhofer, A., Eickemeyer, F. T., Zhu, H., Seo, J., Zhang, J., Schreiber, F., Zhang, H., Zakeeruddin, S. M., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202005211 · Cited by 260
Self-citationIm, J., Stoumpos, C. C., Jin, H., Freeman, A. J., & Kanatzidis, M. G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01738 · Cited by 255
Self-citationRao, H., Ye, S., Sun, W., Yan, W., Li, Y., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.044 · Cited by 261
The Interplay between Trap Density and Hysteresis in Planar Heterojunction Perovskite Solar Cells
Lee, J.-W., Kim, S.-G., Bae, S.-H., Lee, D.-K., Lin, O., Yang, Y., & Park, N.-G. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01211 · Cited by 259
Self-citationWu, T., Wang, Y., Dai, Z., Cui, D., Wang, T., Meng, X., Bi, E., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201900605 · Cited by 257
Organometal halide perovskite thin films and solar cells by vapor deposition
Ono, L. K., Leyden, M. R., Wang, S., & Qi, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08963h · Cited by 258
Sequential Deposition of CH3NH3PbI3 on Planar NiO Film for Efficient Planar Perovskite Solar Cells
Hu, L., Peng, J., Wang, W., Xia, Z., Yuan, J., Lu, J., Huang, X., Ma, W., Song, H., Chen, W., et al. (2014) · ACS Photonics · doi:10.1021/ph5000067 · Cited by 259
Song, Z., Watthage, S. C., Phillips, A. B., Tompkins, B. L., Ellingson, R. J., & Heben, M. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01017 · Cited by 258
Pearson, A. J., Eperon, G. E., Hopkinson, P. E., Habisreutinger, S. N., Wang, J. T., Snaith, H. J., & Greenham, N. C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600014 · Cited by 256
Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules
Troughton, J., Hooper, K., & Watson, T. M. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.039 · Cited by 258
“Since the seminal work by Miyasaka in 2009 [1], followed by the move to fully solid-state devices in 2012 by the groups of Snaith [2] and Gratzel [3], metal halide perovskite solar cells (PSCs) have taken the photovoltaic (PV) research community by storm [4].”
BackgroundVertically Oriented 2D Layered Perovskite Solar Cells with Enhanced Efficiency and Good Stability
Zhang, X., Wu, G., Yang, S., Fu, W., Zhang, Z., Chen, C., Liu, W., Yan, J., Yang, W., & Chen, H. (2017) · Small · doi:10.1002/smll.201700611 · Cited by 256
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Self-citationChen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Self-citationExcess charge-carrier induced instability of hybrid perovskites
Lin, Y., Chen, B., Fang, Y., Zhao, J., Bao, C., Yu, Z., Deng, Y., Rudd, P. N., Yan, Y., Yuan, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-07438-w · Cited by 251
Kim, N.-K., Min, Y. H., Noh, S., Cho, E., Jeong, G., Joo, M., Ahn, S.-W., Lee, J. S., Kim, S., Ihm, K., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-04690-w · Cited by 252
Solution-Processed All-Perovskite Multi-junction Solar Cells
McMeekin, D. P., Mahesh, S., Noel, N. K., Klug, M. T., Lim, J., Warby, J. H., Ball, J. M., Herz, L. M., Johnston, M. B., & Snaith, H. J. (2019) · Joule · doi:10.1016/j.joule.2019.01.007 · Cited by 257
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
A Power Pack Based on Organometallic Perovskite Solar Cell and Supercapacitor
Xu, X., Li, S., Zhang, H., Shen, Y., Zakeeruddin, S. M., Graetzel, M., Cheng, Y.-B., & Wang, M. (2015) · ACS Nano · doi:10.1021/nn506651m · Cited by 251
Self-citationNative Defect‐Induced Hysteresis Behavior in Organolead Iodide Perovskite Solar Cells
Yu, H., Lu, H., Xie, F., Zhou, S., & Zhao, N. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504997 · Cited by 254
CsPbIBr2 Perovskite Solar Cell by Spray-Assisted Deposition
Lau, C. F. J., Deng, X., Ma, Q., Zheng, J., Yun, J. S., Green, M. A., Huang, S., & Ho-Baillie, A. W. Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00341 · Cited by 255
Extended Photo-Conversion Spectrum in Low-Toxic Bismuth Halide Perovskite Solar Cells
Johansson, M. B., Zhu, H., & Johansson, E. M. J. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01452 · Cited by 252
Tang, G., You, P., Tai, Q., Yang, A., Cao, J., Zheng, F., Zhou, Z., Zhao, J., Chan, P. K. L., & Yan, F. (2019) · Advanced Materials · doi:10.1002/adma.201807689 · Cited by 252
Mahmood, K., Swain, B. S., & Amassian, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500568 · Cited by 252
Mesoporous SnO2 electron selective contact enables UV-stable perovskite solar cells
Roose, B., Baena, J.-P. C., Gödel, K. C., Graetzel, M., Hagfeldt, A., Steiner, U., & Abate, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.10.055 · Cited by 250
Self-citationLi, X., Hoffman, J., Ke, W., Chen, M., Tsai, H., Nie, W., Mohite, A. D., Kepenekian, M., Katan, C., Even, J., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07712 · Cited by 253
Ultrathin and flexible perovskite solar cells with graphene transparent electrodes
Liu, Z., You, P., Xie, C., Tang, G., & Yan, F. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.08.038 · Cited by 252
Park, Y. H., Jeong, I., Bae, S., Son, H. J., Lee, P., Lee, J., Lee, C., & Ko, M. J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605988 · Cited by 249
Self-citationAssessing health and environmental impacts of solvents for producing perovskite solar cells
Vidal, R., Alberola-Borràs, J.-A., Habisreutinger, S. N., Gimeno-Molina, J.-L., Moore, D. T., Schloemer, T. H., Mora-Seró, I., Berry, J. J., & Luther, J. M. (2020) · Nature Sustainability · doi:10.1038/s41893-020-00645-8 · Cited by 254
“The transfer mass of the solvent is modelled with equation (3):”
BackgroundCesium Lead Inorganic Solar Cell with Efficiency beyond 18% via Reduced Charge Recombination
Ye, Q., Zhao, Y., Mu, S., Ma, F., Gao, F., Chu, Z., Yin, Z., Gao, P., Zhang, X., & You, J. (2019) · Advanced Materials · doi:10.1002/adma.201905143 · Cited by 252
Review on Chemical Stability of Lead Halide Perovskite Solar Cells
Zhuang, J., Wang, J., & Yan, F. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01046-0 · Cited by 237
“…the photovoltaic performance and chemical stability of the PSCs. Fullerene derivatives, like phenyl-C 61 -butyric acid methyl ester (PCBM) and [6, 6]-Phenyl-C71-butyric acid methyl ester (PC 71 BM), are another type of popularly used electron transport materials particularly in inverted PSCs.”
BackgroundJaramillo-Quintero, O. A., Sanchez, R. S., Rincon, M., & Mora-Sero, I. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00732 · Cited by 251
Zhang, H., Mao, J., He, H., Zhang, D., Zhu, H. L., Xie, F., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501354 · Cited by 251
Self-citationBi, H., Liu, B., He, D., Bai, L., Wang, W., Zang, Z., & Chen, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129375 · Cited by 251
Properties of Excitons and Photogenerated Charge Carriers in Metal Halide Perovskites
Jiang, Y., Wang, X., & Pan, A. (2019) · Advanced Materials · doi:10.1002/adma.201806671 · Cited by 241
Applications of porphyrins in emerging energy conversion technologies
Min Park, J., Lee, J. H., & Jang, W.-D. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213157 · Cited by 249
Zhang, M., Yu, H., Lyu, M., Wang, Q., Yun, J.-H., & Wang, L. (2014) · Chem. Commun. · doi:10.1039/c4cc04973j · Cited by 248
Choi, J., Song, S., Hörantner, M. T., Snaith, H. J., & Park, T. (2016) · ACS Nano · doi:10.1021/acsnano.6b01575 · Cited by 252
Chen, H., Wei, Z., Zheng, X., & Yang, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.025 · Cited by 249
Stabilization of Perovskite Solar Cells: Recent Developments and Future Perspectives
Nazir, G., Lee, S., Lee, J., Rehman, A., Lee, J., Seok, S. I., & Park, S. (2022) · Advanced Materials · doi:10.1002/adma.202204380 · Cited by 248
Hou, F., Su, Z., Jin, F., Yan, X., Wang, L., Zhao, H., Zhu, J., Chu, B., & Li, W. (2015) · Nanoscale · doi:10.1039/c5nr01864a · Cited by 247
Wehrenfennig, C., Liu, M., Snaith, H. J., Johnston, M. B., & Herz, L. M. (2014) · APL Materials · doi:10.1063/1.4891595 · Cited by 251
“Optoelectronic processes in the organic-inorganic perovskites CH3NH3PbI3 and CH3NH3PbI3−xClx are currently receiving a great deal of attention relating to their successful application in the absorber layer of low-cost solar cells [1] [2] [3].”
BackgroundJo, Y., Oh, K. S., Kim, M., Kim, K., Lee, H., Lee, C., & Kim, D. S. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201500768 · Cited by 245
Self-citationWang, Y., Yuan, Z., Shi, G., Li, Y., Li, Q., Hui, F., Sun, B., Jiang, Z., & Liao, L. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504245 · Cited by 248
Sun, Q., Fassl, P., Becker‐Koch, D., Bausch, A., Rivkin, B., Bai, S., Hopkinson, P. E., Snaith, H. J., & Vaynzof, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700977 · Cited by 246
A Realistic Methodology for 30% Efficient Perovskite Solar Cells
Ma, C., & Park, N.-G. (2020) · Chem · doi:10.1016/j.chempr.2020.04.013 · Cited by 247
Self-citationChen, Y., He, M., Peng, J., Sun, Y., & Liang, Z. (2016) · Advanced Science · doi:10.1002/advs.201500392 · Cited by 249
Tan, S., Yu, B., Cui, Y., Meng, F., Huang, C., Li, Y., Chen, Z., Wu, H., Shi, J., Luo, Y., et al. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202201300 · Cited by 245
Engineering of Electron-Selective Contact for Perovskite Solar Cells with Efficiency Exceeding 15%
Hu, Q., Wu, J., Jiang, C., Liu, T., Que, X., Zhu, R., & Gong, Q. (2014) · ACS Nano · doi:10.1021/nn5029828 · Cited by 245
Deng, Y., Xiao, Z., & Huang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500721 · Cited by 245
Tunable hysteresis effect for perovskite solar cells
Rong, Y., Hu, Y., Ravishankar, S., Liu, H., Hou, X., Sheng, Y., Mei, A., Wang, Q., Li, D., Xu, M., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02048a · Cited by 244
Inorganic Electron Transport Materials in Perovskite Solar Cells
Lin, L., Jones, T. W., Yang, T. C., Duffy, N. W., Li, J., Zhao, L., Chi, B., Wang, X., & Wilson, G. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008300 · Cited by 235
Charge Accumulation and Hysteresis in Perovskite‐Based Solar Cells: An Electro‐Optical Analysis
Wu, B., Fu, K., Yantara, N., Xing, G., Sun, S., Sum, T. C., & Mathews, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500829 · Cited by 245
Inkjet printing of CH3NH3PbI3on a mesoscopic TiO2film for highly efficient perovskite solar cells
Li, S.-G., Jiang, K.-J., Su, M.-J., Cui, X.-P., Huang, J.-H., Zhang, Q.-Q., Zhou, X.-Q., Yang, L.-M., & Song, Y.-L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05675b · Cited by 242
Geng, W., Zhang, L., Zhang, Y.-N., Lau, W.-M., & Liu, L.-M. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp504951h · Cited by 244
Pressure-Induced Structural and Optical Properties of Inorganic Halide Perovskite CsPbBr3
Zhang, L., Zeng, Q., & Wang, K. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01577 · Cited by 244
Saliba, M., Tan, K. W., Sai, H., Moore, D. T., Scott, T., Zhang, W., Estroff, L. A., Wiesner, U., & Snaith, H. J. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500717w · Cited by 241
The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells
Zhang, L., Liu, T., Liu, L., Hu, M., Yang, Y., Mei, A., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04647a · Cited by 241
Structure and properties of complex hydride perovskite materials
Schouwink, P., Ley, M. B., Tissot, A., Hagemann, H., Jensen, T. R., Smrčok, Ľ., & Černý, R. (2014) · Nature Communications · doi:10.1038/ncomms6706 · Cited by 238
Quasi-Two-Dimensional Perovskite Solar Cells with Efficiency Exceeding 22%
Zhang, Y., & Park, N.-G. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02645 · Cited by 240
Self-citationElectrodeposition of ZnO Nanorod Arrays on Transparent Conducting Substrates–a Review
Skompska, M., & Zarębska, K. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.049 · Cited by 239
A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability
Priyadarshi, A., Haur, L. J., Murray, P., Fu, D., Kulkarni, S., Xing, G., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02693a · Cited by 241
Solid-State Plasmonic Solar Cells
Ueno, K., Oshikiri, T., Sun, Q., Shi, X., & Misawa, H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00235 · Cited by 241
Rong, Y., Ku, Z., Mei, A., Liu, T., Xu, M., Ko, S., Li, X., & Han, H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500833z · Cited by 241
Wu, B., Zhou, Y., Xing, G., Xu, Q., Garces, H. F., Solanki, A., Goh, T. W., Padture, N. P., & Sum, T. C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604818 · Cited by 239
Rakstys, K., Igci, C., & Nazeeruddin, M. K. (2019) · Chemical Science · doi:10.1039/c9sc01184f · Cited by 241
Scalable Fabrication of Metal Halide Perovskite Solar Cells and Modules
Qiu, L., He, S., Ono, L. K., Liu, S., & Qi, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01396 · Cited by 238
Krieg, F., Ong, Q. K., Burian, M., Rainò, G., Naumenko, D., Amenitsch, H., Süess, A., Grotevent, M. J., Krumeich, F., Bodnarchuk, M. I., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b09969 · Cited by 239
Chen, Y., Tan, S., Li, N., Huang, B., Niu, X., Li, L., Sun, M., Zhang, Y., Zhang, X., Zhu, C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.07.006 · Cited by 242
Templated growth of FASnI3 crystals for efficient tin perovskite solar cells
Liu, X., Wu, T., Chen, J.-Y., Meng, X., He, X., Noda, T., Chen, H., Yang, X., Segawa, H., Wang, Y., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01845g · Cited by 237
Highly compact TiO2layer for efficient hole-blocking in perovskite solar cells
Wu, Y., Yang, X., Chen, H., Zhang, K., Qin, C., Liu, J., Peng, W., Islam, A., Bi, E., Ye, F., et al. (2014) · Applied Physics Express · doi:10.7567/apex.7.052301 · Cited by 239
Planar heterojunction perovskite solar cells with superior reproducibility
Jeon, Y.-J., Lee, S., Kang, R., Kim, J.-E., Yeo, J.-S., Lee, S.-H., Kim, S.-S., Yun, J.-M., & Kim, D.-Y. (2014) · Scientific Reports · doi:10.1038/srep06953 · Cited by 241
“We evaluated the effects of the two different perovskite film morphologies on the cell performances in a device architecture consisting of ITO-coated glass/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS) as the anode/hole transport layer, CH3NH3PbI3/ (6,6)-phenyl C61-butyric acid methyl ester…”
MethodLiu, Y., Chen, Q., Duan, H.-S., Zhou, H., Yang, Y. (., Chen, H., Luo, S., Song, T.-B., Dou, L., Hong, Z., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02502h · Cited by 238
Progress toward Stable Lead Halide Perovskite Solar Cells
Ono, L. K., Qi, Y., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.07.007 · Cited by 240
Scherpelz, P., Govoni, M., Hamada, I., & Galli, G. (2016) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.6b00114 · Cited by 239
Yang, X., Chen, Y., Liu, P., Xiang, H., Wang, W., Ran, R., Zhou, W., & Shao, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001557 · Cited by 235
Ono, L. K., Wang, S., Kato, Y., Raga, S. R., & Qi, Y. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02539c · Cited by 236
Metadata
- Authors
- Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
- Affiliations
- Sungkyunkwan University (KR)
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Park, Nam-Gyu
- Venue
- Scientific Reports
- Published
- 2012-08-21
- Volume
- 2
- Issue
- 1
- Pages
- 591-591
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3423636
- OpenAlex
- W2169328609
- Semantic Scholar
- 84c7f2dcb014acfa2e3da9bab0f390e859735a06
- Cited by
- 8,092
- References
- 27
- Citations by year
- 2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
- FWCI
- 244.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-sa
- creativecommons.org/licenses/by-nc-sa/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-sa/3.0/ (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
- Funders
- National Research Foundation
- École Polytechnique Fédérale de Lausanne
- Sungkyunkwan University
- Ministry of Knowledge Economy (20103020010010)
- National Research Foundation of Korea
- King Abdullah University of Science and Technology (KUS-C1-015-21)
- Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
- Korea Institute of Energy Technology Evaluation and Planning
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
- MeSH terms
- Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.