Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Lin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Self-citation
Cited by
Items 1,001–1,016 of 1,016
Plasmonic–perovskite solar cells, light emitters, and sensors
Ai, B., Fan, Z., & Wong, Z. J. (2022) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00334-2 · Cited by 172
Tunable Near-Infrared Luminescence in Tin Halide Perovskite Devices
Lai, M. L., Tay, T. Y. S., Sadhanala, A., Dutton, S. E., Li, G., Friend, R. H., & Tan, Z.-K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01047 · Cited by 159
La-o-vorakiat, C., Salim, T., Kadro, J., Khuc, M.-T., Haselsberger, R., Cheng, L., Xia, H., Gurzadyan, G. G., Su, H., Lam, Y. M., et al. (2015) · Nature Communications · doi:10.1038/ncomms8903 · Cited by 167
“As the numerical factor is determined by the dimensionality of the diffusion, the factor 2 in equation (3) resulting from the Einstein relation accounts for the root mean squared displacement of diffusing charge between parallel planes in a time (keff) 1.”
Droseros, N., Longo, G., Brauer, J. C., Sessolo, M., Bolink, H. J., & Banerji, N. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00475 · Cited by 153
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Machine‐Learning Modeling for Ultra‐Stable High‐Efficiency Perovskite Solar Cells
Hu, Y., Hu, X., Zhang, L., Zheng, T., You, J., Jia, B., Ma, Y., Du, X., Zhang, L., Wang, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201463 · Cited by 88
Kosasih, F. U., & Ducati, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.055 · Cited by 86
Materials and Methods for High‐Efficiency Perovskite Solar Modules
Lee, D.-K., & Park, N.-G. (2022) · Solar RRL · doi:10.1002/solr.202100455 · Cited by 86
Self-citationComputational Screening of New Perovskite Materials Using Transfer Learning and Deep Learning
Li, X., Dan, Y., Dong, R., Cao, Z., Niu, C., Song, Y., Li, S., & Hu, J. (2019) · Applied Sciences · doi:10.3390/app9245510 · Cited by 74
“In 2012, Grätzel and Park [12] first used solid Spiro-OMeTAD as a hole transport layer to make a solid perovskite solar cell with an efficiency of 9.”
MethodInfluentialMaterials and methods for cost-effective fabrication of perovskite photovoltaic devices
Zhang, C., & Park, N.-G. (2024) · Communications Materials · doi:10.1038/s43246-024-00636-8 · Cited by 72
“Typically,inorganicsaltssuchasleadiodide(PbI 2 )and cesium iodide (CsI), as well as organic salts like methylammonium iodide (MAI) and formamidinium iodide (FAI), are used as the precursors 4,76 .”
Self-citationCegielski, P. J., Neutzner, S., Porschatis, C., Lerch, H., Bolten, J., Suckow, S., Kandada, A. R. S., Chmielak, B., Petrozza, A., Wahlbrink, T., et al. (2017) · Optics Express · doi:10.1364/oe.25.013199 · Cited by 67
Mundt, L. E., & Schelhas, L. T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903074 · Cited by 58
Learn-and-Match Molecular Cations for Perovskites
Park, H., Mall, R., Alharbi, F. H., Sanvito, S., Tabet, N., Bensmail, H., & El-Mellouhi, F. (2019) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.9b06208 · Cited by 50
Importance of structural deformation features in the prediction of hybrid perovskite bandgaps
Park, H., Mall, R., Ali, A., Sanvito, S., Bensmail, H., & El-Mellouhi, F. (2020) · Computational Materials Science · doi:10.1016/j.commatsci.2020.109858 · Cited by 39
Nakanishi, E., Nishikubo, R., Ishiwari, F., Nakamura, T., Wakamiya, A., & Saeki, A. (2022) · ACS Materials Letters · doi:10.1021/acsmaterialslett.2c00229 · Cited by 16
Engineered Nanomaterials for Renewable Energy
Salame, P. H., Pawade, V. B., & Bhanvase, B. A. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00047-x · Cited by 4
Metadata
- Authors
- Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
- Affiliations
- Sungkyunkwan University (KR)
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Park, Nam-Gyu
- Venue
- Scientific Reports
- Published
- 2012-08-21
- Volume
- 2
- Issue
- 1
- Pages
- 591-591
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3423636
- OpenAlex
- W2169328609
- Semantic Scholar
- 84c7f2dcb014acfa2e3da9bab0f390e859735a06
- Cited by
- 8,092
- References
- 27
- Citations by year
- 2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
- FWCI
- 244.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-sa
- creativecommons.org/licenses/by-nc-sa/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-sa/3.0/ (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
- Funders
- National Research Foundation
- École Polytechnique Fédérale de Lausanne
- Sungkyunkwan University
- Ministry of Knowledge Economy (20103020010010)
- National Research Foundation of Korea
- King Abdullah University of Science and Technology (KUS-C1-015-21)
- Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
- Korea Institute of Energy Technology Evaluation and Planning
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
- MeSH terms
- Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.