Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Self-citation6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Lin, H., Huang, C. P., Li, W., Ni, C., Shah, S. I., & Tseng, Y.-H. (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.018 · Cited by 913
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Self-citationQuantum Dot Sensitization of Organic−Inorganic Hybrid Solar Cells
Plass, R., Pelet, S., Krueger, J., Grätzel, M., & Bach, U. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp020453l · Cited by 749
Self-citationKoster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
High-Performance Nanostructured Inorganic−Organic Heterojunction Solar Cells
Chang, J. A., Rhee, J. H., Im, S. H., Lee, Y. H., Kim, H.-J., Seok, S. I., Nazeeruddin, M. K., & Gratzel, M. (2010) · Nano Letters · doi:10.1021/nl101322h · Cited by 565
Self-citation
Cited by
Items 501–600 of 1,016
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells
Akin, S., Arora, N., Zakeeruddin, S. M., Grätzel, M., Friend, R. H., & Dar, M. I. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903090 · Cited by 352
Self-citationXie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
Self-citationLiang, P., Chueh, C., Williams, S. T., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402321 · Cited by 353
High performance perovskite solar cells by hybrid chemical vapor deposition
Leyden, M. R., Ono, L. K., Raga, S. R., Kato, Y., Wang, S., & Qi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04385e · Cited by 350
Sensitive, Fast, and Stable Perovskite Photodetectors Exploiting Interface Engineering
Sutherland, B. R., Johnston, A. K., Ip, A. H., Xu, J., Adinolfi, V., Kanjanaboos, P., & Sargent, E. H. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00164 · Cited by 351
Photovoltaically top-performing perovskite crystal facets
Ma, C., Kang, M.-C., Lee, S.-H., Kwon, S. J., Cha, H.-W., Yang, C.-W., & Park, N.-G. (2022) · Joule · doi:10.1016/j.joule.2022.09.012 · Cited by 349
Self-citationKörbel, S., Marques, M. A. L., & Botti, S. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc04172d · Cited by 351
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Chen, H., Wei, Z., He, H., Zheng, X., Wong, K. S., & Yang, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502087 · Cited by 348
Progress in Theoretical Study of Metal Halide Perovskite Solar Cell Materials
Xiao, Z., & Yan, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701136 · Cited by 344
Yang, Z., Chueh, C., Zuo, F., Kim, J. H., Liang, P., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500328 · Cited by 348
Material and Device Stability in Perovskite Solar Cells
Kim, H., Seo, J., & Park, N. (2016) · ChemSusChem · doi:10.1002/cssc.201600915 · Cited by 346
Self-citationAll‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells
Luo, Q., Ma, H., Hou, Q., Li, Y., Ren, J., Dai, X., Yao, Z., Zhou, Y., Xiang, L., Du, H., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706777 · Cited by 346
Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
Sebastian, M., Peters, J. A., Stoumpos, C. C., Im, J., Kostina, S. S., Liu, Z., Kanatzidis, M. G., Freeman, A. J., & Wessels, B. W. (2015) · Physical Review B · doi:10.1103/physrevb.92.235210 · Cited by 343
Self-citationXie, C., You, P., Liu, Z., Li, L., & Yan, F. (2017) · Light: Science & Applications · doi:10.1038/lsa.2017.23 · Cited by 348
Structural and Functional Diversity in Lead‐Free Halide Perovskite Materials
Ning, W., & Gao, F. (2019) · Advanced Materials · doi:10.1002/adma.201900326 · Cited by 348
Mixed Dimensional 2D/3D Hybrid Perovskite Absorbers: The Future of Perovskite Solar Cells?
Krishna, A., Gottis, S., Nazeeruddin, M. K., & Sauvage, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806482 · Cited by 345
Efficiency progress of inverted perovskite solar cells
Lin, X., Cui, D., Luo, X., Zhang, C., Han, Q., Wang, Y., & Han, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02017f · Cited by 346
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Noh, J. H., Jeon, N. J., Choi, Y. C., Nazeeruddin, M. K., Grätzel, M., & Seok, S. I. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12681a · Cited by 341
Self-citationLiu, Z., Lau, S. P., & Yan, F. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00455h · Cited by 343
Yang, M., Zhou, Y., Zeng, Y., Jiang, C., Padture, N. P., & Zhu, K. (2015) · Advanced Materials · doi:10.1002/adma.201502586 · Cited by 344
From Ultrafast to Ultraslow: Charge-Carrier Dynamics of Perovskite Solar Cells
Shi, J., Li, Y., Li, Y., Li, D., Luo, Y., Wu, H., & Meng, Q. (2018) · Joule · doi:10.1016/j.joule.2018.04.010 · Cited by 341
14.1% CsPbI3 Perovskite Quantum Dot Solar Cells via Cesium Cation Passivation
Ling, X., Zhou, S., Yuan, J., Shi, J., Qian, Y., Larson, B. W., Zhao, Q., Qin, C., Li, F., Shi, G., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900721 · Cited by 343
Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells
Rong, Y., Tang, Z., Zhao, Y., Zhong, X., Venkatesan, S., Graham, H., Patton, M., Jing, Y., Guloy, A. M., & Yao, Y. (2015) · Nanoscale · doi:10.1039/c5nr02866c · Cited by 343
Solution Deposition‐Conversion for Planar Heterojunction Mixed Halide Perovskite Solar Cells
Docampo, P., Hanusch, F. C., Stranks, S. D., Döblinger, M., Feckl, J. M., Ehrensperger, M., Minar, N. K., Johnston, M. B., Snaith, H. J., & Bein, T. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400355 · Cited by 341
Dynamic Stereochemical Activity of the Sn2+ Lone Pair in Perovskite CsSnBr3
Fabini, D. H., Laurita, G., Bechtel, J. S., Stoumpos, C. C., Evans, H. A., Kontos, A. G., Raptis, Y. S., Falaras, P., Van der Ven, A., Kanatzidis, M. G., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06287 · Cited by 334
Maximizing the emissive properties of CH3NH3PbBr3 perovskite nanoparticles
Gonzalez-Carrero, S., Galian, R. E., & Pérez-Prieto, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05878j · Cited by 340
Etienne, T., Mosconi, E., & De Angelis, F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00564 · Cited by 342
Bi, D., Li, X., Milić, J. V., Kubicki, D. J., Pellet, N., Luo, J., LaGrange, T., Mettraux, P., Emsley, L., Zakeeruddin, S. M., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06709-w · Cited by 339
Self-citationWu, W.-Q., Lei, B.-X., Rao, H.-S., Xu, Y.-F., Wang, Y.-F., Su, C.-Y., & Kuang, D.-B. (2013) · Scientific Reports · doi:10.1038/srep01352 · Cited by 339
Highly Efficient Perovskite Solar Cells with Tunable Structural Color
Zhang, W., Anaya, M., Lozano, G., Calvo, M. E., Johnston, M. B., Míguez, H., & Snaith, H. J. (2015) · Nano Letters · doi:10.1021/nl504349z · Cited by 338
Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304
Zhang, H., Wang, H., Chen, W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201604984 · Cited by 335
Binary‐Metal Perovskites Toward High‐Performance Planar‐Heterojunction Hybrid Solar Cells
Zuo, F., Williams, S. T., Liang, P., Chueh, C., Liao, C., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401641 · Cited by 335
High-Performance Planar-Type Photodetector on (100) Facet of MAPbI3 Single Crystal
Lian, Z., Yan, Q., Lv, Q., Wang, Y., Liu, L., Zhang, L., Pan, S., Li, Q., Wang, L., & Sun, J.-L. (2015) · Scientific Reports · doi:10.1038/srep16563 · Cited by 336
Lead‐Free Halide Perovskite Materials and Optoelectronic Devices: Progress and Prospective
López‐Fernández, I., Valli, D., Wang, C., Samanta, S., Okamoto, T., Huang, Y., Sun, K., Liu, Y., Chirvony, V. S., Patra, A., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202307896 · Cited by 327
Ko, H.-S., Lee, J.-W., & Park, N.-G. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00658a · Cited by 334
Self-citationYuan, J., Ling, X., Yang, D., Li, F., Zhou, S., Shi, J., Qian, Y., Hu, J., Sun, Y., Yang, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.011 · Cited by 333
Defect Activity in Lead Halide Perovskites
Motti, S. G., Meggiolaro, D., Martani, S., Sorrentino, R., Barker, A. J., De Angelis, F., & Petrozza, A. (2019) · Advanced Materials · doi:10.1002/adma.201901183 · Cited by 331
Gottesman, R., Haltzi, E., Gouda, L., Tirosh, S., Bouhadana, Y., Zaban, A., Mosconi, E., & De Angelis, F. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501373f · Cited by 333
Light-Induced Degradation of CH3NH3PbI3 Hybrid Perovskite Thin Film
Li, Y., Xu, X., Wang, C., Ecker, B., Yang, J., Huang, J., & Gao, Y. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b11853 · Cited by 333
Wang, X., Li, Z., Xu, W., Kulkarni, S. A., Batabyal, S. K., Zhang, S., Cao, A., & Wong, L. H. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.042 · Cited by 330
You, S., Zeng, H., Ku, Z., Wang, X., Wang, Z., Rong, Y., Zhao, Y., Zheng, X., Luo, L., Li, L., et al. (2020) · Advanced Materials · doi:10.1002/adma.202003990 · Cited by 329
Chatterjee, S., & Pal, A. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11540 · Cited by 327
Perovskite Solar Cells: Influence of Hole Transporting Materials on Power Conversion Efficiency
Ameen, S., Rub, M. A., Kosa, S. A., Alamry, K. A., Akhtar, M. S., Shin, H., Seo, H., Asiri, A. M., & Nazeeruddin, M. K. (2016) · ChemSusChem · doi:10.1002/cssc.201501228 · Cited by 327
Gu, S., Lin, R., Han, Q., Gao, Y., Tan, H., & Zhu, J. (2020) · Advanced Materials · doi:10.1002/adma.201907392 · Cited by 329
Excitons in ultrathin organic-inorganic perovskite crystals
Yaffe, O., Chernikov, A., Norman, Z. M., Zhong, Y., Velauthapillai, A., van der Zande, A., Owen, J. S., & Heinz, T. F. (2015) · Physical Review B · doi:10.1103/physrevb.92.045414 · Cited by 330
Toward Eco-friendly and Stable Perovskite Materials for Photovoltaics
Ju, M.-G., Chen, M., Zhou, Y., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · Joule · doi:10.1016/j.joule.2018.04.026 · Cited by 330
“Since the early stages of PSC development, the most widely studied perovskites are Pb-based organic-inorganic halide perovskites (OIHPs), which have a general chemical formula of ABX3, where A = CH3NH3 + (MA) or HC(NH2)2 + (FA); B = Pb; and X = I , Br , or Cl (see the left panel in Figure 1).(8,9) Recently, the family…”
BackgroundShallow Iodine Defects Accelerate the Degradation of α-Phase Formamidinium Perovskite
Tan, S., Yavuz, I., Weber, M. H., Huang, T., Chen, C.-H., Wang, R., Wang, H.-C., Ko, J. H., Nuryyeva, S., Xue, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.08.016 · Cited by 324
Nanochemistry and nanomaterials for photovoltaics
Chen, G., Seo, J., Yang, C., & Prasad, P. N. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60054h · Cited by 325
Perovskite Photodetectors Operating in Both Narrowband and Broadband Regimes
Saidaminov, M. I., Haque, M. A., Savoie, M., Abdelhady, A. L., Cho, N., Dursun, I., Buttner, U., Alarousu, E., Wu, T., & Bakr, O. M. (2016) · Advanced Materials · doi:10.1002/adma.201601235 · Cited by 324
Tuning Perovskite Morphology by Polymer Additive for High Efficiency Solar Cell
Chang, C.-Y., Chu, C.-Y., Huang, Y.-C., Huang, C.-W., Chang, S.-Y., Chen, C.-A., Chao, C.-Y., & Su, W.-F. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00052 · Cited by 325
Decomposition of Organometal Halide Perovskite Films on Zinc Oxide Nanoparticles
Cheng, Y., Yang, Q.-D., Xiao, J., Xue, Q., Li, H.-W., Guan, Z., Yip, H.-L., & Tsang, S.-W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04695 · Cited by 325
Hadadian, M., Correa‐Baena, J., Goharshadi, E. K., Ummadisingu, A., Seo, J., Luo, J., Gholipour, S., Zakeeruddin, S. M., Saliba, M., Abate, A., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602785 · Cited by 327
Self-citationRong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Fundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Niu, T., Zhu, W., Zhang, Y., Xue, Q., Jiao, X., Wang, Z., Xie, Y.-M., Li, P., Chen, R., Huang, F., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.003 · Cited by 320
The 2019 materials by design roadmap
Alberi, K., Nardelli, M. B., Zakutayev, A., Mitas, L., Curtarolo, S., Jain, A., Fornari, M., Marzari, N., Takeuchi, I., Green, M. L., et al. (2019) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aad926 · Cited by 322
“The light-to-electricity conversion efficiency of metal halide solar cells now exceeds 22% for champion laboratory-scale devices [90]—following pioneering efforts on perovskite-sensitized [93, 94] and durable solid-state perovskite solar cells [93, 94]—that is comparable to mature thin-film photovoltaic technologies.”
Self-citationTitanate and titania nanostructured materials for environmental and energy applications: a review
Zhang, Y., Jiang, Z., Huang, J., Lim, L. Y., Li, W., Deng, J., Gong, D., Tang, Y., Lai, Y., & Chen, Z. (2015) · RSC Advances · doi:10.1039/c5ra11298b · Cited by 318
Cao, J., Jing, X., Yan, J., Hu, C., Chen, R., Yin, J., Li, J., & Zheng, N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04924 · Cited by 320
Li, W., Li, J., Li, J., Fan, J., Mai, Y., & Wang, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08332c · Cited by 318
Emerging Self‐Emissive Technologies for Flexible Displays
Zhang, D., Huang, T., & Duan, L. (2020) · Advanced Materials · doi:10.1002/adma.201902391 · Cited by 316
Surface-Controlled Oriented Growth of FASnI3 Crystals for Efficient Lead-free Perovskite Solar Cells
Meng, X., Wang, Y., Lin, J., Liu, X., He, X., Barbaud, J., Wu, T., Noda, T., Yang, X., & Han, L. (2020) · Joule · doi:10.1016/j.joule.2020.03.007 · Cited by 319
Atomic-scale microstructure of metal halide perovskite
Rothmann, M. U., Kim, J. S., Borchert, J., Lohmann, K. B., O’Leary, C. M., Sheader, A. A., Clark, L., Snaith, H. J., Johnston, M. B., Nellist, P. D., et al. (2020) · Science · doi:10.1126/science.abb5940 · Cited by 319
“Many of the phenomenal advances in the performance of hybrid metal halide perovskite (MHP) solar cells have resulted from improvements in device architecture and material composition studied on a mesoscopic to macroscopic scale(1-7), and changes in material properties have usually been inferred from relatively “large…”
BackgroundRadiative efficiency of lead iodide based perovskite solar cells
Tvingstedt, K., Malinkiewicz, O., Baumann, A., Deibel, C., Snaith, H. J., Dyakonov, V., & Bolink, H. J. (2014) · Scientific Reports · doi:10.1038/srep06071 · Cited by 317
Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Chen, W., Wu, Y., Liu, J., Qin, C., Yang, X., Islam, A., Cheng, Y.-B., & Han, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02833c · Cited by 319
Bi, C., Shao, Y., Yuan, Y., Xiao, Z., Wang, C., Gao, Y., & Huang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04007d · Cited by 316
HPbI3: A New Precursor Compound for Highly Efficient Solution‐Processed Perovskite Solar Cells
Wang, F., Yu, H., Xu, H., & Zhao, N. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404007 · Cited by 316
Superior Photovoltaic Properties of Lead Halide Perovskites: Insights from First-Principles Theory
Yin, W.-J., Shi, T., & Yan, Y. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp512077m · Cited by 314
Cs2NaBiCl6:Mn2+—A New Orange-Red Halide Double Perovskite Phosphor
Majher, J. D., Gray, M. B., Strom, T. A., & Woodward, P. M. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b05280 · Cited by 315
Integrating Perovskite Solar Cells into a Flexible Fiber
Qiu, L., Deng, J., Lu, X., Yang, Z., & Peng, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201404973 · Cited by 312
Chalcogenide perovskites – an emerging class of ionic semiconductors
Perera, S., Hui, H., Zhao, C., Xue, H., Sun, F., Deng, C., Gross, N., Milleville, C., Xu, X., Watson, D. F., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.020 · Cited by 310
On the crystal structure of colloidally prepared CsPbBr3 quantum dots
Cottingham, P., & Brutchey, R. L. (2016) · Chemical Communications · doi:10.1039/c6cc01088a · Cited by 315
Charge Transport and Recombination in Perovskite (CH3NH3)PbI3 Sensitized TiO2 Solar Cells
Zhao, Y., & Zhu, K. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401527q · Cited by 312
Fan, Z., Sun, K., & Wang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04235f · Cited by 310
Xiao, J., Shi, J., Liu, H., Xu, Y., Lv, S., Luo, Y., Li, D., Meng, Q., & Li, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401943 · Cited by 314
Turren-Cruz, S.-H., Saliba, M., Mayer, M. T., Juárez-Santiesteban, H., Mathew, X., Nienhaus, L., Tress, W., Erodici, M. P., Sher, M.-J., Bawendi, M. G., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02901b · Cited by 311
“(1) Perovskites used for photovoltaics (PV) have an AMX3 formula that is comprised of a monovalent cation, A = cesium (Cs), methylammonium (MA); formamidinium (FA);(2-7) a divalent metal M = (Pb; Sn)(8-10); and a halide anion X = (Cl, Br; I).”
BackgroundSelf-citationMyths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Hossain, M. K., Samajdar, D. P., Das, R. C., Arnab, A. A., Rahman, M. F., Rubel, M. H. K., Islam, M. R., Bencherif, H., Pandey, R., Madan, J., et al. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00181 · Cited by 305
Tress, W. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00975 · Cited by 307
Recent advances in energy materials by electrospinning
Liu, Q., Zhu, J., Zhang, L., & Qiu, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.281 · Cited by 306
Pushing commercialization of perovskite solar cells by improving their intrinsic stability
Cheng, Y., & Ding, L. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00493j · Cited by 306
Iodine Migration and Degradation of Perovskite Solar Cells Enhanced by Metallic Electrodes
Besleaga, C., Abramiuc, L. E., Stancu, V., Tomulescu, A. G., Sima, M., Trinca, L., Plugaru, N., Pintilie, L., Nemnes, G. A., Iliescu, M., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02375 · Cited by 305
Meng, L., Sun, C., Wang, R., Huang, W., Zhao, Z., Sun, P., Huang, T., Xue, J., Lee, J.-W., Zhu, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10520 · Cited by 308
Rao, H., Li, W., Chen, B., Kuang, D., & Su, C. (2017) · Advanced Materials · doi:10.1002/adma.201602639 · Cited by 305
Li, L., Chen, Y., Liu, Z., Chen, Q., Wang, X., & Zhou, H. (2016) · Advanced Materials · doi:10.1002/adma.201603021 · Cited by 305
Development of Dopant‐Free Organic Hole Transporting Materials for Perovskite Solar Cells
Pham, H. D., Yang, T. C., Jain, S. M., Wilson, G. J., & Sonar, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903326 · Cited by 301
He, Y., Hadar, I., & Kanatzidis, M. G. (2022) · Nature Photonics · doi:10.1038/s41566-021-00909-5 · Cited by 301
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Yamada, Y., Nakamura, T., Endo, M., Wakamiya, A., & Kanemitsu, Y. (2014) · Applied Physics Express · doi:10.7567/apex.7.032302 · Cited by 303
Zhao, Y., Nardes, A. M., & Zhu, K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500003v · Cited by 303
Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites
Ke, W., Stoumpos, C. C., Spanopoulos, I., Mao, L., Chen, M., Wasielewski, M. R., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09018 · Cited by 301
Chemical formation of soft metal electrodes for flexible and wearable electronics
Wang, D., Zhang, Y., Lu, X., Ma, Z., Xie, C., & Zheng, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00192d · Cited by 307
Short‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., & Zhang, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900991 · Cited by 302
Ali, F., Roldán‐Carmona, C., Sohail, M., & Nazeeruddin, M. K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002989 · Cited by 296
Perovskite Oxide SrTiO3 as an Efficient Electron Transporter for Hybrid Perovskite Solar Cells
Bera, A., Wu, K., Sheikh, A., Alarousu, E., Mohammed, O. F., & Wu, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp509753p · Cited by 303
Metadata
- Authors
- Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
- Affiliations
- Sungkyunkwan University (KR)
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Park, Nam-Gyu
- Venue
- Scientific Reports
- Published
- 2012-08-21
- Volume
- 2
- Issue
- 1
- Pages
- 591-591
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3423636
- OpenAlex
- W2169328609
- Semantic Scholar
- 84c7f2dcb014acfa2e3da9bab0f390e859735a06
- Cited by
- 8,092
- References
- 27
- Citations by year
- 2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
- FWCI
- 244.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-sa
- creativecommons.org/licenses/by-nc-sa/3.0/ (tdm)
- creativecommons.org/licenses/by-nc-sa/3.0/ (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
- Funders
- National Research Foundation
- École Polytechnique Fédérale de Lausanne
- Sungkyunkwan University
- Ministry of Knowledge Economy (20103020010010)
- National Research Foundation of Korea
- King Abdullah University of Science and Technology (KUS-C1-015-21)
- Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
- Korea Institute of Energy Technology Evaluation and Planning
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
- MeSH terms
- Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.