The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
Open accessAbstract
A challenge in regenerating large bone defects under load is to create scaffolds with large and interconnected pores while providing a compressive strength comparable to cortical bone (100–150 MPa). Here we design a novel hexagonal architecture for a glass-ceramic scaffold to fabricate an anisotropic, highly porous three dimensional scaffolds with a compressive strength of 110 MPa. Scaffolds with hexagonal design demonstrated a high fatigue resistance (1,000,000 cycles at 1–10 MPa compressive cyclic load), failure reliability and flexural strength (30 MPa) compared with those for conventional architecture. The obtained strength is 150 times greater than values reported for polymeric and composite scaffolds and 5 times greater than reported values for ceramic and glass scaffolds at similar porosity. These scaffolds open avenues for treatment of load bearing bone defects in orthopaedic, dental and maxillofacial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Distribution Function of Wide Applicability
Weibull, W. (1951) · Journal of Applied Mechanics · doi:10.1115/1.4010337 · Cited by 11,604
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Review of bioactive glass: From Hench to hybrids
Jones, J. R. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.023 · Cited by 2,451
Bone regeneration: current concepts and future directions
Dimitriou, R., Jones, E., McGonagle, D., & Giannoudis, P. V. (2011) · BMC Medicine · doi:10.1186/1741-7015-9-66 · Cited by 2,003
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Bioactive glass in tissue engineering
Rahaman, M. N., Day, D. E., Sonny Bal, B., Fu, Q., Jung, S. B., Bonewald, L. F., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.016 · Cited by 1,794
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
45S5 Bioglass®-derived glass–ceramic scaffolds for bone tissue engineering
Chen, Q. Z., Thompson, I. D., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.025 · Cited by 1,241
Hutmacher, D. W., Schantz, J. T., Lam, C. X. F., Tan, K. C., & Lim, T. C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.24 · Cited by 1,007
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Deville, S., Saiz, E., & Tomsia, A. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.06.028 · Cited by 873
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Wagoner Johnson, A. J., & Herschler, B. A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.012 · Cited by 635
Fava, N. M. N., Soares, R. M., Scalia, L. A. M., Kalapothakis, E., Pena, I. F., Vieira, C. U., Faria, E. S. M., Cunha, M. J., Couto, T. R., & Cury, M. C. (2013) · BioMed Research International · doi:10.1155/2013/875048 · Cited by 602
A review of bioactive silicate ceramics
Wu, C., & Chang, J. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/3/032001 · Cited by 338
Fu, Q., Rahaman, M. N., Sonny Bal, B., Brown, R. F., & Day, D. E. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.019 · Cited by 302
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
The incorporation of strontium and zinc into a calcium–silicon ceramic for bone tissue engineering
Zreiqat, H., Ramaswamy, Y., Wu, C., Paschalidis, A., Lu, Z., James, B., Birke, O., McDonald, M., Little, D., & Dunstan, C. R. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.024 · Cited by 299
Self-citationFast setting calcium phosphate–chitosan scaffold: mechanical properties and biocompatibility
Xu, H. H. K., & Simon, C. G. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.043 · Cited by 270
Bioinspired Strong and Highly Porous Glass Scaffolds
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002030 · Cited by 252
Tissue engineering of bone: search for a better scaffold
Mastrogiacomo, M., Muraglia, A., Komlev, V, Peyrin, F., Rustichelli, F., Crovace, A., & Cancedda, R. (2005) · Orthodontics & Craniofacial Research · doi:10.1111/j.1601-6343.2005.00350.x · Cited by 250
Toward Strong and Tough Glass and Ceramic Scaffolds for Bone Repair
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201301121 · Cited by 247
Liu, X., Rahaman, M. N., Hilmas, G. E., & Bal, B. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.026 · Cited by 223
Hydroxyapatite reinforced collagen scaffolds with improved architecture and mechanical properties
Kane, R. J., Weiss-Bilka, H. E., Meagher, M. J., Liu, Y., Gargac, J. A., Niebur, G. L., Wagner, D. R., & Roeder, R. K. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.031 · Cited by 202
Cordell, J. M., Vogl, M. L., & Johnson, A. J. W. (2009) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2009.01.009 · Cited by 158
Custom-made composite scaffolds for segmental defect repair in long bones
Reichert, J. C., Wullschleger, M., Cipitria, A., Lienau, J., Cheng, T. K., Schuetz, M., Duda, G. N., Nöth, U. A., Eulert, J., & Hutmacher, D. W. (2010) · International Orthopaedics · doi:10.1007/s00264-010-1146-x · Cited by 137
Novitskaya, E. E., Chen, P., Lee, S. C., Castro-Ceseña, A. B., Hirata, G. A., Lubarda, V. A., & McKittrick, J. M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.04.025 · Cited by 131
Development of Composite Scaffolds for Load-Bearing Segmental Bone Defects
Pilia, M., Guda, T., & Appleford, M. R. (2013) · BioMed Research International · doi:10.1155/2013/458253 · Cited by 122
Houmard, M., Fu, Q., Genet, M., Saiz, E., & Tomsia, A. P. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32935 · Cited by 120
Internal femoral forces and moments during running: Implications for stress fracture development
Edwards, W. B., Gillette, J. C., Thomas, J. M., & Derrick, T. R. (2008) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2008.06.011 · Cited by 115
A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration
Seol, Y., Park, D. Y., Park, J. Y., Kim, S. W., Park, S. J., & Cho, D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24794 · Cited by 96
Skeletal tissue engineering—from in vitro studies to large animal models
Buma, P., Schreurs, W. B., & Verdonschot, N. J. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00492-7 · Cited by 93
Xu, M., Zhai, D., Chang, J., et al. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.09.011 · Cited by 88
Mechanical properties and reliability of glass–ceramic foam scaffolds for bone repair
Baino, F., & Vitale‐Brovarone, C. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.12.037 · Cited by 84
Silk as a biocohesive sacrificial binder in the fabrication of hydroxyapatite load bearing scaffolds
McNamara, S. L., Rnjak‐Kovacina, J., Schmidt, D. F., Lo, T. J., & Kaplan, D. L. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.013 · Cited by 73
Eqtesadi, S., Motealleh, A., Pajares, A., Guiberteau, F., & Miranda, P. (2015) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2015.02.025 · Cited by 68
Unique microstructural design of ceramic scaffolds for bone regeneration under load
Roohani‐Esfahani, S., Dunstan, C. R., Li, J. J., Lu, Z., Davies, B., PEARCE, S. G., Field, J., Williams, R., & Zreiqat, H. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.039 · Cited by 61
Self-citationRakovsky, A., Gotman, I., Rabkin, E., & Gutmanas, E. Y. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.12.022 · Cited by 55
Flauder, S., Gbureck, U., & Müller, F. A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.08.020 · Cited by 52
Processing of highly porous TiO2 bone scaffolds with improved compressive strength
Tiainen, H., Wiedmer, D., & Haugen, H. J. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.08.016 · Cited by 50
Chen, H., Wang, C., Zhu, X., Zhang, K., Fan, Y., & Zhang, X. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.07.026 · Cited by 50
Roohani‐Esfahani, S., Chen, Y., Shi, J. X., & Zreiqat, H. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.06.046 · Cited by 48
Self-citationDai, Y., Liu, H., Liu, B., Wang, Z., Li, Y., & Zhou, G. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.021 · Cited by 33
Zhou, C., Ye, X. J., Fan, Y., Qing, F., Chen, H., & Zhang, X. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.03.008 · Cited by 31
Fabrication of HA/β‐TCP scaffolds based on micro‐syringe extrusion system
Huang, W. D., Zhang, X., Wu, Q. Z., & Wu, B. (2013) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2012-0004 · Cited by 27
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
Scaffolds for bone tissue engineering: state of the art and new perspectives
Roseti, L., Parisi, V., Petretta, M., Cavallo, C., Desando, G., Bartolotti, I., & Grigolo, B. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.017 · Cited by 1,320
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy.
Ma, H., Feng, C., Chang, J., & Wu, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.026 · Cited by 512
Metadata
- Authors
- Roohani-Esfahani, S.-I., Newman, P., & Zreiqat, H.
- Venue
- Scientific Reports
- Published
- 2016-01-19
- Volume
- 6
- Issue
- 1
- Pages
- 19468-19468
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2410654559
- Cited by
- 380
- References
- 44
- FWCI
- 19.00
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.