Reducing implant-related infections: active release strategies
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Despite sterilization and aseptic procedures, bacterial infection remains a major impediment to the utility of medical implants including catheters, artificial prosthetics, and subcutaneous sensors. Indwelling devices are responsible for over half of all nosocomial infections, with an estimate of 1 million cases per year (2004) in the United States alone. Device-associated infections are the result of bacterial adhesion and subsequent biofilm formation at the implantation site. Although useful for relieving associated systemic infections, conventional antibiotic therapies remain ineffective against biofilms. Unfortunately, the lack of a suitable treatment often leaves extraction of the contaminated device as the only viable option for eliminating the biofilm. Much research has focused on developing polymers that resist bacterial adhesion for use as medical device coatings. This tutorial review focuses on coatings that release antimicrobial agents (i.e., active release strategies) for reducing the incidence of implant-associated infection. Following a brief introduction to bacteria, biofilms, and infection, the development and study of coatings that slowly release antimicrobial agents such as antibiotics, silver ions, antibodies, and nitric oxide are covered. The success and limitations of these strategies are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ideally, all biomedical devices should be able to prevent bacterial colonization on their surfaces, especially within the first 6 h of blood exposure, which is identified to be the most susceptible and most “decisive period” for the success of a long-term implant.20”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“Nitric oxide (NO) has antimicrobial activity against a growing list of microorganisms, including bacteria, fungi, parasites, viruses, and yeast.20,111,120,127,177,281,282”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“The first 6 h after surgical implantation is highly susceptible to bacterial invasion and surface colonization, and has been coined the “decisive period” [299].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [299]
Citations
Cites
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Rubbo, H., Radi, R., Trujillo, M., Telleri, R., Kalyanaraman, B., Barnes, S., Kirk, M., & Freeman, B. A. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)47160-8 · Cited by 1,359
Fang, F. C. (1997) · Journal of Clinical Investigation · doi:10.1172/jci119473 · Cited by 1,149
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?
Furno, F., Morley, K. S., Wong, B., Sharp, B. L., Arnold, P. L., Howdle, S. M., Bayston, R., Brown, P. D., Winship, P. D., & Reid, H. J. (2004) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkh478 · Cited by 764
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Spinal-Fusion Surgery — The Case for Restraint
Deyo, R. A., Nachemson, A., & Mirza, S. K. (2004) · New England Journal of Medicine · doi:10.1056/nejmsb031771 · Cited by 515
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Research works printed but not linked: 1
- Raulli, 2002, Recent Res. Dev. Microbiol., 6, 177
Cited by
Items 901–1,000 of 1,000
An Osteoconductive Antibiotic Bone Eluting Putty with a Custom Polymer Matrix
Curley, J., Hasan, M. S., Larson, J., Brooks, B. D., Liu, Q., Jain, T., Joy, A., & Brooks, A. E. (2016) · Polymers · doi:10.3390/polym8070247 · Cited by 9
Integrating 3D printing of biomaterials with nitric oxide release
de Almeida, H. V., Bomediano, M. P., Catori, D. M., Silva, E. H. C., & de Oliveira, M. G. (2025) · Biomaterials Science · doi:10.1039/d4bm01304b · Cited by 9
Inorganic Biomaterials to Support the Formation and Repair of Bone Tissue
Sullivan, C. O., Kennedy, G., O’Neill, L., Crean, A. M., & Ryan, K. B. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781788019293-00242 · Cited by 9
Soyhan, I., Polat, T., Mozioğlu, E., Ildeniz, T. A. O., Elmas, M. A., Cebeci, S., Ünübol, N., & Gök, Ö. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16081045 · Cited by 9
Ghosh, S., Sen, S. P., Jash, M., Ghosh, S., Jana, A., Roy, R., Mukherjee, N., Mukherjee, D., Sarkar, J., & Ghosh, S. (2024) · ACS Infectious Diseases · doi:10.1021/acsinfecdis.3c00696 · Cited by 9
Zhang, R., Xia, A., Ni, L., Li, F., Jin, Z., Yang, S., & Jin, F. (2017) · Advanced Biosystems · doi:10.1002/adbi.201700161 · Cited by 9
Zhou, C. Z., Song, H., Zhang, F., Liu, J., Li, J., Liu, B., & Liang, J. (2018) · Polymer Bulletin · doi:10.1007/s00289-018-2637-y · Cited by 9
Antibacterial and physical characteristics of silver-loaded hydroxyapatite/alginate composites
Sukhodub, L. F., Pogrebnjak, A. D., Sukhodub, L. B., Sagidugumar, A., Kistaubayeva, A., Savitskaya, I., Talipova, A. B., Садибеков, А. Б., Kantay, N., Akatan, K., et al. (2021) · Functional Composites and Structures · doi:10.1088/2631-6331/ac3afb · Cited by 9
A universal coating strategy for inhibiting the growth of bacteria on materials surfaces
Zhang, J., Wang, M., Hu, L., Zhang, Q., Chen, E., Wang, Z., Shi, Y., Tan, L., & Xiao, S. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1043353 · Cited by 9
Polymeric prodrugs of ampicillin as antibacterial coatings
Prudencio, A., Stebbins, N. D., Johnson, M. L., Song, M., Langowski, B. A., & Uhrich, K. E. (2014) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911514528410 · Cited by 9
Katsikogianni, M. G., Foka, A., Sardella, E., Ingrosso, C., Favia, P., Mangone, A., Spiliopoulou, I. T., & Missirlis, Y. F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.44a004 · Cited by 9
Novel Approaches to avoid Microbial Adhesion onto Biomaterials
Rodrigues, L. R. (2011) · Journal of Biotechnology & Biomaterials · doi:10.4172/2155-952x.1000104e · Cited by 9
Plasma-initiated graft polymerization of carbon nanoparticles as nano-based drug delivery systems
Liu, T., Stradford, C., Ambi, A., Centeno, D., Roca, J., Cattabiani, T., Drwiega, T. J., Li, C., & Traba, C. (2021) · Biofouling · doi:10.1080/08927014.2021.2008376 · Cited by 9
Effect of silver‐loaded PMMA on Streptococcus mutans in a drip flow reactor
Williams, D. L., Epperson, R. T., DeGrauw, J., Nielsen, M. B., Taylor, N. B., & Jolley, R. D. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36112 · Cited by 9
A Porcine Model for the Development and Testing of Preoperative Skin Preparations
Duffy, H. R., Godfrey, R., Williams, D. L., & Ashton, N. N. (2022) · Microorganisms · doi:10.3390/microorganisms10050837 · Cited by 9
Zhao, X., Liu, H., Hu, Y., Huang, J., Zhang, S., & Ja, F. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.07.014 · Cited by 9
Wang, L., Shi, J., Bao, S., Liu, G., Xie, C., Liao, F., Kundu, S. C., Reis, R. L., Duan, L., Xiao, B., et al. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.09.242 · Cited by 9
Tan, Z., Ganapathy, A. R., Orndorff, P. E., & Shirwaiker, R. A. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5382-x · Cited by 9
The Role of Orientation of Surface Bound Dihydropyrrol-2-ones (DHP) on Biological Activity
Taunk, A., Chen, R., Iskander, G. M., Ho, K. K. K., Almohaywi, B., Black, D. S., Willcox, M. D. P., & Kumar, N. (2019) · Molecules · doi:10.3390/molecules24142676 · Cited by 9
Tsikopoulos, K., Drago, L., Koutras, G., Givissis, P., Vagdatli, E., Soukiouroglou, P., & Papaioannidou, P. (2020) · Microorganisms · doi:10.3390/microorganisms8050743 · Cited by 9
Microparticle entrapment for drug release from porous-surfaced bone implants
Wang, D., Liu, Q., Xiao, D., Guo, T., Ma, Y., Duan, K., Wang, J., Lu, X., Feng, B., & Weng, J. (2015) · Journal of Microencapsulation · doi:10.3109/02652048.2015.1046515 · Cited by 9
Macko, J., Oriňák, A., Oriňáková, R., Muhmann, C., Petruš, O., Harvanová, D., Vargová, J., Jendželovský, R., Radoňak, J., Fedoročko, P., et al. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.07.104 · Cited by 9
Synthesis of antibacterial Janus sheets containing dual-active centers by quaternization fracture
Wang, B., Guo, W., Li, T., Wang, R., Song, P., He, Y., & Cheng, X. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127276 · Cited by 8
One-step assay of pore-forming biotoxins based on biomimetic perovskite nanocrystals
Li, M., Tian, T., Zeng, Y., Zhu, S., Li, C., Yin, Y., & Li, G. (2021) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2021.129839 · Cited by 8
Anti-biofouling and Antimicrobial Biomaterials for Tissue Engineering
Zhu, Y., Jia, K., & Zhang, L. (2020) · Springer eBooks · doi:10.1007/978-3-030-34471-9_14 · Cited by 8
Elsayed, S. M., Widyaya, V. T., Shafi, Y., Eickenscheidt, A., & Lienkamp, K. (2019) · Molecules · doi:10.3390/molecules24183371 · Cited by 8
Silver Containing Biomaterials
Poulter, N., Vasilev, K. A., Griesser, S. S., & Griesser, H. J. (2012) · Springer eBooks · doi:10.1007/978-1-4614-1031-7_14 · Cited by 8
Nitric oxide‐releasing antibacterial albumin plastic for biomedical applications
Jones, A., Pant, J., Lee, E., Goudie, M. J., Gruzd, A., Mansfield, J. A., Mandal, A., Sharma, S., & Handa, H. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36349 · Cited by 8
Design and Synthesis of Novel Piperazine Derivatives with High Antibacterial Activity
Zhang, M., Wang, Y., Sun, J., Wu, J., Yan, W., & Zheng, Y. (2013) · Chemistry Letters · doi:10.1246/cl.2013.227 · Cited by 8
Plasma-Generated Poly(allyl alcohol) Antifouling Coatings for Cellular Attachment
Watkins, L. M., Lee, A. F., MOIR, J. W. B., & Wilson, K. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00705 · Cited by 8
Antimicrobial Activity of the Engineered Nanoparticles Used as Coating Agents
Swaminathan, M., & Sharma, N. K. (2017) · Springer eBooks · doi:10.1007/978-3-319-48281-1_1-1 · Cited by 8
Development of silver based antimicrobial films for coating and food packaging applications
Martínez‐Abad, A. (2014) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/36738 · Cited by 8
Anti-biofouling function of amorphous nano-Ta 2 O 5 coating for VO 2 -based intelligent windows
Li, J., Guo, G., Wang, J., Zhou, H., Shen, H., & Yeung, K. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa6525 · Cited by 8
Naderi, J., Giles, C., Saboohi, S., Griesser, H. J., & Coad, B. R. (2020) · Biointerphases · doi:10.1116/6.0000511 · Cited by 8
Berglin, M., Cavanagh, J. P., Caous, J. S., Thakkar, B. S., Vasquez, J. M., Stensen, W., Lyvén, B., Svendsen, J. S. M., & Svenson, J. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300425 · Cited by 8
Liu, J., Zhang, W., Shi, H., Yang, K., Wang, G., Wang, P., Ji, J., & Chu, P. K.-H. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35652 · Cited by 8
Yan, T., Jiang, Z., Li, P., Chen, Q., Zhou, J., Cui, X., & Wang, Q. (2021) · Coatings · doi:10.3390/coatings11080957 · Cited by 8
Balaure, P. C., Gudovan, D., & Gudovan, I. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-41625-2.00006-5 · Cited by 7
Assessment of Polydopamine to Reduce Streptococcus mutans Adhesion to a Dental Polymer
Arango-Santander, S., Martinez, C., Bedoya‐Correa, C. M., Garzón, J. S., & Franco, J. (2023) · Pathogens · doi:10.3390/pathogens12101223 · Cited by 7
Silicone-containing thermoresponsive membranes to form an optical glucose biosensor
Dong, P. X., Singh, K. A., Soltes, A. M., Ko, B. S., Gaharwar, A. K., McShane, M. J., & Grunlan, M. A. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb01192a · Cited by 7
Jeong, H. I., An, D. H., Lim, J. W., Oh, T., Lee, H., Park, S., Jeong, J. H., & Chung, J. W. (2021) · Micromachines · doi:10.3390/mi12040447 · Cited by 7
A comprehensive review on roles of electrochemical approaches in drug delivery
Jalalvand, A. R., & Karami, M. M. (2025) · Sensing and Bio-Sensing Research · doi:10.1016/j.sbsr.2025.100742 · Cited by 7
Antimicrobial/Antifouling Surfaces Obtained by Surface Modification
Rodríguez‐Hernández, J. (2016) · Springer eBooks · doi:10.1007/978-3-319-47961-3_5 · Cited by 7
Yang, X., Lou, F., Yuan, W., Song, W., Xue, Y., Wang, D., Guo, Y., Peng, X., Xu, X., Liu, C., et al. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101446 · Cited by 7
Antimicrobial coatings based on polymeric materials
Sanjeeva, S. G., Bajire, S. K., Shastry, R. P., & Johnson, R. P. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99291-6.00015-3 · Cited by 7
A Thirst for Polymeric Antimicrobial Surfaces/Coatings for Diverse Applications
Nagaraja, A., Jalageri, M. D., & Puttaiahgowda, Y. M. (2020) · Materials horizons · doi:10.1007/978-981-15-4630-3_2 · Cited by 7
Xu, D., Ju, X., Zhu, M., Ou, J., Lu, G., Wan, C., Li, K., Jiang, W. J., Jia, X., Yong-ping, H., et al. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.03.038 · Cited by 7
Donesz‐Sikorska, A., Grzesiak, J., Śmieszek, A., Krzak, J., & Marycz, K. (2014) · Journal of Biomaterials Applications · doi:10.1177/0885328214534003 · Cited by 7
Albdrawy, A. I., Aleanizy, F. S., Eltayb, E. K., Aldossari, A. A., Alanazi, M. M., Alfaraj, R., Eltahir, E., Albasri, H. M., Alanazi, J. S., & Alqahtani, F. Y. (2024) · International Journal of Nanomedicine · doi:10.2147/ijn.s445737 · Cited by 7
Biodegradable Metals for Orthopedic Applications
Yang, K., Tan, L., Wan, P., Yu, X., & Ma, Z. (2017) · Springer eBooks · doi:10.1007/978-3-319-73664-8_11 · Cited by 7
Entrapment of Drugs within Metallic Platinum and Their Delivery
Menagen, B., & Avnir, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00379 · Cited by 7
Klinger-Strobel, M., Makarewicz, O., Pletz, M. W., Stallmach, A., & Lautenschläger, C. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5792-4 · Cited by 7
Silver-substituted hydroxyapatite: Mechanochemical synthesis and thermal stability
Makarova, S. V., Borodulina, I. A., Prosanov, I. Y., Borisenko, Т. А., Logutenko, O. A., Bulina, N. V., & Ищенко, А. В. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.09.125 · Cited by 7
Silver‐ and Nanosilver‐Based Plastic Technologies
Martínez‐Abad, A. (2011) · Wiley eBooks · doi:10.1002/9781118150887.ch11 · Cited by 7
A self-referencing microelectrode for real time measurements of silver flux
McLamore, E. S., Stensberg, M., Sepúlveda, M. S., Zhang, W., Banks, M. K., & Porterfield, D. M. (2010) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2010.11.014 · Cited by 7
Xu, J., Mahfoudi, W., Yang, J., Lian, J., & Zhang, T. (2026) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2026.109953 · Cited by 7
Arunpandian, M., Parvathi, L. T., Selvakumar, K., Oh, T. H., & Karuthapandian, S. (2023) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-023-02802-w · Cited by 7
Effect of Ag and Cu additions on antibacterial performance of Fe-based amorphous alloys
Yang, S., Pan, J., Zhang, H., & Ling, H. (2025) · BioMetals · doi:10.1007/s10534-025-00759-6 · Cited by 7
Li, Y., Liu, C., Mo, H., Zhang, J., Jiang, X., Zhang, L., Yang, L., Fu, L., He, L., Zhao, Y., et al. (2019) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911519872779 · Cited by 7
Ong, J., Godfrey, R., Nazarian, A., Tam, J., Drake, L. A., Isaacson, B. M., Pasquina, P. F., & Williams, D. L. (2023) · Journal of Orthopaedic Research® · doi:10.1002/jor.25535 · Cited by 7
Li, S., Zhao, Z., Wang, J., Xie, L., Pan, M., Wu, F., Hu, Y., Liu, J., & Zeng, H. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400276 · Cited by 7
Elsayed, S. M., Paschke, S., Rau, S. J., & Lienkamp, K. (2019) · Molecules · doi:10.3390/molecules24050909 · Cited by 7
Nanomaterial-reinforced composites for biomedical implant applications: a mini-review
Kumar, M., Kumar, R., & Kumar, S. (2022) · Bioinspired Biomimetic and Nanobiomaterials · doi:10.1680/jbibn.21.00061 · Cited by 6
Priya, A., Swetha, T. K., & Pandian, S. K. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820084-1.00021-1 · Cited by 6
Comparable Studies on Nanoscale Antibacterial Polymer Coatings Based on Different Coating Procedures
Laube, T., Weisser, J., Sachse, S., Seemann, T., Wyrwa, R., & Schnabelrauch, M. (2022) · Nanomaterials · doi:10.3390/nano12040614 · Cited by 6
Gaikwad, V., Kumbhar, S. T., Ansari, E., & Karale, P. (2025) · Intelligent Hospital · doi:10.1016/j.inhs.2025.100045 · Cited by 6
Polymer and its nanocomposites as an antimicrobial coating for medical devices and implants
Ağçeli, G. K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95756-4.00010-5 · Cited by 6
Valkov, S., Nikolova, M. P., Dimitrova, T. V., Stancheva, M. E., Dechev, D., Ivanov, N., Handzhiyski, Y., Andreeva, A., Ormanova, M., Anchev, A. P., et al. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb17010016 · Cited by 6
Chu, W., Tang, H., Dong, Z., Hou, A., Qiu, R., Xu, X., Yang, J., He, L., Luo, J., & Li, J. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00377a · Cited by 6
Anti-adhesive and Antibacterial Polymer Brushes
Neoh, K. G., Shi, Z., & Kang, E. T. (2012) · Springer eBooks · doi:10.1007/978-1-4614-1031-7_16 · Cited by 6
López-Pérez, D., Baker, P. J., Pintar, A. L., Sun, J., Lin, N. J., & Lin‐Gibson, S. (2017) · Biofouling · doi:10.1080/08927014.2017.1286476 · Cited by 6
Nitric Oxide-Releasing Liposomes for Treatment of Mycobacterium abscessus Infections
Nagy, S. G., Metiva, J. J., & Schoenfisch, M. H. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c00218 · Cited by 6
Self-citationYadav, N., & Mishra, V. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95756-4.00011-7 · Cited by 6
Staphylococcus epidermidis: Adhesion and Biofilm Formation onto Biomaterials
Sousa, C. (2011) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 6
Rosenblatt, J. S., Reitzel, R. A., Viola, G. M., Vargas‐Cruz, N., Selber, J. C., & RAAD, I. I. (2017) · BioMed Research International · doi:10.1155/2017/3149536 · Cited by 6
Polymer nanocomposites for drug delivery applications in bone tissue regeneration
Mouriño, V. (2016) · Elsevier eBooks · doi:10.1016/b978-1-78242-452-9.00008-x · Cited by 6
Innovative methods for the diagnosis and treatment of implant-associated infections
Baldoni, D. (2009) · edoc (University of Basel) · doi:10.5451/unibas-005042244 · Cited by 6
Silver, magnesium and zinc substituted hydroxyapatite for orthopaedic applications
Louyeh, M. A. (2017) · University of Birmingham Institutional Research Archive (University of Birmingham) · Cited by 6
Speciality polymers for the finishing of technical textiles
Jassal, M., & Agrawal, A. K. (2013) · Elsevier eBooks · doi:10.1533/9780857097613.2.309 · Cited by 6
Current trends and future prospects of chemical management of oral biofilms
Patil, S., Vidya, G. S., Baeshen, H. A., Sumayli, M. A. A., AlShahrani, M. A. S., Najmi, A. I. A., Jafer, M. A., Vishwanathaiah, S., & Khan, S. (2020) · Journal of Oral Biology and Craniofacial Research · doi:10.1016/j.jobcr.2020.08.017 · Cited by 6
Aerogels as microbial disinfectant
Oves, M., Rauf, M. A., Warsi, M. K., Husain, F. M., Ansari, M. O., & Ismail, I. M. I. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820732-1.00011-4 · Cited by 6
Liu, C., Han, J., Li, Z., Liu, Y., Wu, R., Cao, S., & Wu, D. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202300489 · Cited by 6
Nanosize Dendrimers: Potential Use as Carriers and Antimicrobials
Sk, U. H. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-52733-0.00012-4 · Cited by 6
Katiyar, N. K., & Biswas, K. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102020 · Cited by 6
Functionalization of Biomaterials and Applications
Falentin‐Daudre, C. (2014) · Wiley eBooks · doi:10.1002/9781119043553.ch6 · Cited by 6
Biofilms and Implication in Medical Devices in Humans and Animals
Hooper, S. J., Percival, S. L., Cochrane, C. A., & Williams, D. W. (2011) · Springer series on biofilms · doi:10.1007/978-3-642-21289-5_8 · Cited by 6
Dhillon, M. (2012) · Massey Research Online (Massey University) · Cited by 6
Nam, K.-Y. (2014) · 대한치과재료학회지 · doi:10.14815/kjdm.2014.41.1.67 · Cited by 6
Jafari, D., Moghaddam, M. M., Tafti, M. F., & Mirnejad, R. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.111165 · Cited by 6
Kuang, Z., Xiao, K., Hu, J., Bo, Y., Zhang, B., Chen, M., Zhang, X., Liu, X., & Wei, Y. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114578 · Cited by 6
Kurteva, V. B., Lubenov, L. A., Shivachev, B. L., Nikolova, R. P., & Fromm, K. M. (2018) · ChemistrySelect · doi:10.1002/slct.201802745 · Cited by 6
Ibuprofen controlled release from E-beam treated polycaprolactone electrospun scaffolds
Rakina, A. A., Spriridonova, T. I., Kudryavtseva, V., Kolesnik, I., Sazonov, R., Remnev, G. E., & Tverdokhlebov, S. I. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1115/3/032051 · Cited by 6
An, J., Sun, A., Qiao, Y., Zhang, P., & Su, M. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-014-5374-2 · Cited by 6
Antimicrobial activity of Ag surfaces sputtered by magnetron sputtering
Mei, L., Wang, J., Wang, X., & Yang, C. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000806 · Cited by 6
Implant Biomaterials for Intervertebral Disc Regeneration, Reconstruction and Restoration
Narmawala, F., Gaikwad, M., & Srivastava, A. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00227-8 · Cited by 5
NO‐, CO‐, and H 2 S‐Based Metallopharmaceuticals
MAURYA, R. C., & Mir, J. M. (2020) · Wiley eBooks · doi:10.1002/9781119640868.ch6 · Cited by 5
Petráková, M., Gorejová, R., Shepa, J., Macko, J., Kupková, M., Petruš, O., Baláž, M., Sopčák, T., Mičušík, M., Kožár, M., et al. (2024) · ACS Omega · doi:10.1021/acsomega.4c06192 · Cited by 5
Yaguchi, A., Uchida, N., Miura, D., Watanabe, G., Hiramatsu, H., Ajioka, I., Matsubara, T., Sato, T., Enkhzaya, C., Itani, S., et al. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202508528 · Cited by 5
Ding, T., Zhang, L., Xie, H., Guo, H., Wu, S., Han, J., & Han, Y. (2026) · Biomaterials · doi:10.1016/j.biomaterials.2026.124123 · Cited by 5
Kumar, A. M., Hussein, M. A., Suresh, B., Ramakrishna, S., Saravanan, S., & Javid, M. (2025) · Scientific Reports · doi:10.1038/s41598-025-99983-w · Cited by 5
Metadata
- Authors
- Hetrick, E. M., & Schoenfisch, M. H.
- Affiliations
- University of North Carolina at Chapel Hill (US)
- Corresponding author
- Schoenfisch, Mark H.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 35
- Issue
- 9
- Pages
- 780
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2113751614
- Cited by
- 1,201
- References
- 46
- Citations by year
- 2026: 30 · 2025: 40 · 2024: 48 · 2023: 53 · 2022: 67 · 2021: 70 · 2020: 84 · 2019: 84 · 2018: 71 · 2017: 86 · 2016: 90 · 2015: 93 · 2014: 81 · 2013: 64 · 2012: 60
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemical Society Reviews (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Health Sciences › Medicine › Surgery › Orthopedic Infections and Treatments
- Keywords
- implant-associated infection, biofilm, bacterial adhesion, medical device coatings, antimicrobial release, silver ion release, nitric oxide, catheters, nosocomial infections, device-related infection
- MeSH terms
- Animals, Anti-Bacterial Agents, Bacterial Adhesion, Bacterial Infections, Humans, Nitric Oxide, Surgical Wound Infection, Implants, Experimental
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.