Reducing implant-related infections: active release strategies
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Despite sterilization and aseptic procedures, bacterial infection remains a major impediment to the utility of medical implants including catheters, artificial prosthetics, and subcutaneous sensors. Indwelling devices are responsible for over half of all nosocomial infections, with an estimate of 1 million cases per year (2004) in the United States alone. Device-associated infections are the result of bacterial adhesion and subsequent biofilm formation at the implantation site. Although useful for relieving associated systemic infections, conventional antibiotic therapies remain ineffective against biofilms. Unfortunately, the lack of a suitable treatment often leaves extraction of the contaminated device as the only viable option for eliminating the biofilm. Much research has focused on developing polymers that resist bacterial adhesion for use as medical device coatings. This tutorial review focuses on coatings that release antimicrobial agents (i.e., active release strategies) for reducing the incidence of implant-associated infection. Following a brief introduction to bacteria, biofilms, and infection, the development and study of coatings that slowly release antimicrobial agents such as antibiotics, silver ions, antibodies, and nitric oxide are covered. The success and limitations of these strategies are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ideally, all biomedical devices should be able to prevent bacterial colonization on their surfaces, especially within the first 6 h of blood exposure, which is identified to be the most susceptible and most “decisive period” for the success of a long-term implant.20”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“Nitric oxide (NO) has antimicrobial activity against a growing list of microorganisms, including bacteria, fungi, parasites, viruses, and yeast.20,111,120,127,177,281,282”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“The first 6 h after surgical implantation is highly susceptible to bacterial invasion and surface colonization, and has been coined the “decisive period” [299].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [299]
Citations
Cites
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Rubbo, H., Radi, R., Trujillo, M., Telleri, R., Kalyanaraman, B., Barnes, S., Kirk, M., & Freeman, B. A. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)47160-8 · Cited by 1,359
Fang, F. C. (1997) · Journal of Clinical Investigation · doi:10.1172/jci119473 · Cited by 1,149
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?
Furno, F., Morley, K. S., Wong, B., Sharp, B. L., Arnold, P. L., Howdle, S. M., Bayston, R., Brown, P. D., Winship, P. D., & Reid, H. J. (2004) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkh478 · Cited by 764
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Spinal-Fusion Surgery — The Case for Restraint
Deyo, R. A., Nachemson, A., & Mirza, S. K. (2004) · New England Journal of Medicine · doi:10.1056/nejmsb031771 · Cited by 515
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Research works printed but not linked: 1
- Raulli, 2002, Recent Res. Dev. Microbiol., 6, 177
Cited by
Items 201–300 of 1,000
Xu, L., Wo, Y., Meyerhoff, M. E., & Siedlecki, C. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.030 · Cited by 108
Wang, Z., Li, M., Liu, X., & Zhou, Q. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111802 · Cited by 108
Hoque, J., & Haldar, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03208 · Cited by 108
Nitric oxide-releasing S-nitrosothiol-modified xerogels
Riccio, D. A., Dobmeier, K. P., Hetrick, E. M., Privett, B. J., Paul, H. S., & Schoenfisch, M. H. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.006 · Cited by 107
Self-citationDexamethasone Base Conserves Hearing from Electrode Trauma‐Induced Hearing Loss
Vivero, R. J., Joseph, D. E., Angeli, S. I., He, J., Chen, S., Eshraghi, A. A., Bałkany, T. J., & Water, T. R. V. D. (2008) · The Laryngoscope · doi:10.1097/mlg.0b013e31818173ec · Cited by 107
Recent advances in hydrothermal modification of calcium phosphorus coating on magnesium alloy
Ling, L., Cai, S., Li, Q., Sun, J.-Y., Bao, X., & Xu, G. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.014 · Cited by 107
Immobilization of Amphiphilic Polycations by Catechol Functionality for Antimicrobial Coatings
Han, H., Wu, J., Avery, C. W., Mizutani, M., Jiang, X., Kamigaito, M., Chen, Z., Xi, C., & Kuroda, K. (2011) · Langmuir · doi:10.1021/la1046904 · Cited by 106
Hoque, J., Adhikary, U., Yadav, V., Samaddar, S., Konai, M. M., Prakash, R. G., Krishnamoorthy, P., Shome, B. R., Sanyal, K., & Haldar, J. (2016) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.6b00764 · Cited by 106
Sara, D. H., Pérez‐Álvarez, L., Gómez-Galván, F., Lizundia, E., Kuřitka, I., Sedlařík, V., Laza, J. M., & Vilas‐Vilela, J. L. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.008 · Cited by 106
Composite polymer-bioceramic scaffolds with drug delivery capability for bone tissue engineering
Mouriño, V., Cattalini, J. P., Roether, J. A., Dubey, P., Roy, I., & Boccaccini, A. R. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.808183 · Cited by 105
Natural Green Coating Inhibits Adhesion of Clinically Important Bacteria
Trentin, D. D. S., Silva, D. B., Frasson, A. P., Rzhepishevska, O. I., Silva, M. V. V., Pulcini, E. D. L., James, G. A., Soares, G. V., Tasca, T., Ramstedt, M., et al. (2015) · Scientific Reports · doi:10.1038/srep08287 · Cited by 105
Antibacterial Layer-by-Layer Coatings for Medical Implants
Escobar, A., Muzzio, N., & Moya, S. E. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics13010016 · Cited by 104
Coatings on orthopedic implants to overcome present problems and challenges: A focused review
Kumar, M., Kumar, R., & Kumar, S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.01.831 · Cited by 103
Bio-inspired redox-cycling antimicrobial film for sustained generation of reactive oxygen species
Liu, H., Qu, X., Kim, E., Miao, L., Dai, K., Tan, X., Xu, M., Li, J., Liu, Y., Shi, X., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.12.027 · Cited by 102
Antibacterial surfaces by adsorptive binding of polyvinyl-sulphonate-stabilized silver nanoparticles
Vasilev, K. A., Sah, V. R., Goreham, R. V., Ndi, C. P., Short, R. D., & Griesser, H. J. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/21/215102 · Cited by 102
Li, D., Dai, D., Xiong, G., Lan, S., & Zhang, C. (2023) · Advanced Science · doi:10.1002/advs.202300658 · Cited by 101
Polyurethanes for Biomedical Applications
Moghadam, S. G., Parsimehr, H., & Ershad-Langroudi, A. (2021) · ACS Symposium Series · doi:10.1021/bk-2021-1380.ch013 · Cited by 100
Additively Manufactured and Surface Biofunctionalized Porous Nitinol
Karaji, Z. G., Speirs, M., Dadbakhsh, S., Kruth, J., Weinans, H., ZADPOOR, A. A., & Yavari, S. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14026 · Cited by 100
Controlled drug delivery systems in eradicating bacterial biofilm-associated infections
Liu, Y., Li, Y., & Shi, L. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.038 · Cited by 99
Dicationic imidazolium-based ionic liquids: a new strategy for non-toxic and antimicrobial materials
Gindri, I. M., Siddiqui, D. A., Bhardwaj, P., Rodriguez, L. C., Palmer, K. L., Frizzo, C. P., Martins, M. A. P., & Rodrigues, D. C. (2014) · RSC Advances · doi:10.1039/c4ra09906k · Cited by 99
Sánchez‐Bodón, J., del Olmo, J. A., Alonso, J. M., Moreno, I., Vilas‐Vilela, J. L., & Pérez‐Álvarez, L. (2021) · Polymers · doi:10.3390/polym14010165 · Cited by 100
Gao, Q., Tao, F., Huang, D., Liu, P., Lin, P., Wu, Y. L., Ye, Z., Ji, J., Li, P., & Huang, W. (2020) · Biomaterials Science · doi:10.1039/c9bm01396b · Cited by 99
Shakya, A. K., Al-Sulaibi, M., Naik, R. R., Nsairat, H., Suboh, S., & Abulaila, A. (2023) · Polymers · doi:10.3390/polym15173597 · Cited by 98
Ding, Y., Hao, Y., Zhang, Y., Tao, B., Chen, M., Lin, C., Liu, P., & Cai, K. (2020) · Biomaterials Science · doi:10.1039/c9bm01924c · Cited by 98
Ramstedt, M., Ekstrand‐Hammarström, B., Shchukarev, A., Bucht, A., Österlund, L., Welch, M., & Huck, W. T. S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.008 · Cited by 97
All-in-one strategy for the fabrication of antimicrobial biomimetic films on stainless steel
Charlot, A., Sciannaméa, V., Lenoir, S., Faure, E., Jérôme, R., Jérôme, C., de Weerdt, C. V., MARTIAL, J. A., Archambeau, C., Willet, N., et al. (2009) · Journal of Materials Chemistry · doi:10.1039/b820832h · Cited by 97
Zhang, M., Zhao, Y., Yan, L., Peltier, R., Hui, W., Yao, X., Cui, Y., Chen, X., Sun, H., & Wang, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01396 · Cited by 97
Manna, J., Begum, G., Kumar, K. P., Misra, S., & Rana, R. K. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400933n · Cited by 97
Antibacterial burst-release from minimal Ag-containing plasma polymer coatings
Guimond-Lischer, S., Körner, E., Balazs, D. J., Shen, D., Wick, P., Grieder, K., Haas, D., Heuberger, M. P., & Hegemann, D. (2011) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0596 · Cited by 96
Coatings and surface modifications imparting antimicrobial activity to orthopedic implants
Kargupta, R., Bok, S., Darr, C. M., Crist, B. D., Gangopadhyay, K., Gangopadhyay, S., & Sengupta, S. (2014) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1273 · Cited by 96
Yu, K., Lo, J., Mei, Y., Haney, E. F., Siren, E. M. J., Kalathottukaren, M. T., Hancock, R. E. W., Lange, D., & Kizhakkedathu, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10074 · Cited by 95
Stöber Synthesis of Nitric Oxide-Releasing S-Nitrosothiol-Modified Silica Particles
Riccio, D. A., Nugent, J. L., & Schoenfisch, M. H. (2011) · Chemistry of Materials · doi:10.1021/cm102510q · Cited by 93
Self-citationNitric oxide based strategies for applications of biomedical devices
Yang, Y., Qi, P., Yang, Z., & Huang, N. (2015) · Biosurface and Biotribology · doi:10.1016/j.bsbt.2015.08.003 · Cited by 93
Xiang, Y., Liu, X., Mao, C., Liu, X., Cui, Z., Yang, X., Yeung, K., Zheng, Y., & Wu, S. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.12.034 · Cited by 93
Pant, J., Gao, J., Goudie, M. J., Hopkins, S. P., Locklin, J., & Handa, H. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.061 · Cited by 93
Kucharíková, S., Gerits, E., Brucker, K. D., Braem, A., Čeh, K., Majdič, G., Španić, T., Pogorevc, E., Verstraeten, N., Tournu, H., et al. (2015) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkv437 · Cited by 92
Aggregation-Induced Emission Probe for Study of the Bactericidal Mechanism of Antimicrobial Peptides
Chen, J., Gao, M., Wang, L., Li, S., He, J., Qin, A., Ren, L., Wang, Y., & Tang, B. Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18221 · Cited by 92
Inhibition of Staphylococcus epidermidis Biofilm by Trimethylsilane Plasma Coating
Ma, Y., Chen, M., Jones, J. E., Ritts, A. C., Yu, Q., & Sun, H. (2012) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.01739-12 · Cited by 90
Navani, N. K., Lambadi, P. R., Sharma, T., Kumar, P., Vasnani, P., Thalluri, S. M., Bisht, N., & Pathania, R. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s72923 · Cited by 90
Hopkins, S. P., Pant, J., Goudie, M. J., Schmiedt, C. W., & Handa, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08647 · Cited by 90
Study on improved tribological properties by alloying copper to CP-Ti and Ti–6Al–4V alloy
Wang, S., Ma, Z., Liao, Z., Song, J., Yang, K., & Liu, W. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.07.046 · Cited by 90
Park, D., Kim, J., Lee, Y. M., Park, J., & Kim, W. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600150 · Cited by 89
Antiadhesive activity of ulvan polysaccharides covalently immobilized onto titanium surface
Gadenne, V., Lebrun, L., Jouenne, T., & Thébault, P. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.07.061 · Cited by 89
He, X., Zhang, X., Wang, X., & Qin, L. (2017) · Coatings · doi:10.3390/coatings7030045 · Cited by 89
Karlsson, A. J., Flessner, R. M., Gellman, S. H., Lynn, D. M., & Palecek, S. P. (2010) · Biomacromolecules · doi:10.1021/bm100424s · Cited by 88
Zou, P., Hartleb, W., & Lienkamp, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31695a · Cited by 88
Controlled Delivery of Vancomycin via Charged Hydrogels
Gustafson, C. T., Boakye‐Agyeman, F., Brinkman, C. L., Reid, J. M., Patel, R., Bajzer, Ž., Dadsetan, M., & Yaszemski, M. J. (2016) · PLoS ONE · doi:10.1371/journal.pone.0146401 · Cited by 88
The role of rare earth elements in bone tissue engineering scaffolds - A review
Gao, J., Feng, L., Chen, B., Fu, B., & Zhu, M. C. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109758 · Cited by 88
Hybrid Systems of Silver Nanoparticles Generated on Cellulose Surfaces
Ferraria, A. M., Boufi, S., Battaglini, N., do Rego, A. M. B., & Rei-Vilar, M. (2009) · Langmuir · doi:10.1021/la902477q · Cited by 88
Li, Y., Xiong, W., Zhang, C., Gao, B., Guan, H., Cheng, H., Fu, J., & Li, F. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35060 · Cited by 87
Antibiofilm Nitric Oxide-Releasing Polydopamine Coatings
Sadrearhami, Z., Shafiee, F. N., Ho, K. K. K., Kumar, N., Krasowska, M., Blencowe, A., Wong, E. H. H., & Boyer, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16853 · Cited by 87
Polymeric Systems of Antimicrobial Peptides—Strategies and Potential Applications
Sobczak, M., Debek, C., Olędzka, E., & Kozlowski, R. M. (2013) · Molecules · doi:10.3390/molecules181114122 · Cited by 87
Mathew, A., Vaquette, C., Hashimi, S., Rathnayake, I., Huygens, F., Hutmacher, D. W., & Ivanovski, S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601345 · Cited by 86
Ma, R., Lai, Y., Li, L., Tan, H., Wang, J., Li, Y., Tang, T., & Qin, L. (2015) · Scientific Reports · doi:10.1038/srep13775 · Cited by 86
Choudhary, P., Parandhaman, T., Ramalingam, B., Duraipandy, N., Kiran, M. S., & Das, S. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11203 · Cited by 86
He, J., Fang, J., Wei, P., Li, Y., Guo, H., Mei, Q., & Ren, F. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.032 · Cited by 86
Recent Advancements in the Use of Aerosol-Assisted Atmospheric Pressure Plasma Deposition
Palumbo, F., Porto, C. L., Fracassi, F., & Favia, P. (2020) · Coatings · doi:10.3390/coatings10050440 · Cited by 86
Triggered drug delivery from biomaterials
McCoy, C. P., Brady, C., Cowley, J. F., McGlinchey, S. M., McGoldrick, N., Kinnear, D. J., Andrews, G. P., & Jones, D. S. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425241003677731 · Cited by 85
Wang, T., Liu, X., Zhu, Y., Cui, Z., Yang, X. J., Pan, H., Yeung, K., & Wu, S. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00103 · Cited by 85
Ji, H., Zhao, M., Xie, B., Zhao, Y., Yin, D., Gao, C., Shuai, C., & Atrens, A. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158415 · Cited by 85
Liu, Q., Singha, P., Handa, H., & Locklin, J. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b02970 · Cited by 85
del Olmo, J. A., Pérez‐Álvarez, L., Sáez‐Martínez, V., Cid, S. B., Ruiz‐Rubio, L., Pérez-González, R., Vilas‐Vilela, J. L., & Alonso, J. M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.01.193 · Cited by 84
The antibacterial and angiogenic effect of magnesium oxide in a hydroxyapatite bone substitute
Coelho, C. C., Padrão, T., Costa, L., Pinto, M. T., Costa, P. C., Domingues, V. F., Quadros, P. A., Monteiro, F. J., & Sousa, S. R. (2020) · Scientific Reports · doi:10.1038/s41598-020-76063-9 · Cited by 84
Gentamicin-Loaded Bioactive Hydroxyapatite/Chitosan Composite Coating Electrodeposited on Titanium
Stevanović, M., Djošić, M., Janković, A., Kojić, V., Vukašinović‐Sekulić, M., Stojanovic, J. N., Odović, J., Crevar, M., Rhee, K. Y., & Mišković‐Stanković, V. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00859 · Cited by 84
Rosenberg, M., Ilić, K., Juganson, K., Ivask, A., Ahonen, M. H., Vrček, I. V., & Kahru, A. (2019) · PeerJ · doi:10.7717/peerj.6315 · Cited by 84
Surmeneva, M. A., Sharonova, A. A., Chernousova, S., Prymak, O., Loza, K., Tkachev, M. S., Анисимович, Ш. И., Epple, M., & Анатольевич, С. Р. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.05.016 · Cited by 83
Ielo, I., Giacobello, F., Castellano, A., Sfameni, S., Rando, G., & Plutino, M. R. (2021) · Gels · doi:10.3390/gels8010026 · Cited by 82
Green biosynthesis of silver nanoparticles using Torreya nucifera and their antibacterial activity
Kalpana, D., Han, J. H., Park, W. S., Lee, S. M., Wahab, R., & Lee, Y. (2014) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2014.08.016 · Cited by 82
Biomaterials-Based Modulation of the Immune System
Gardner, A. B., Lee, S. K. C., Woods, E. C., & Acharya, A. P. (2013) · BioMed Research International · doi:10.1155/2013/732182 · Cited by 81
Kim, H. J., Yang, B., Park, T. Y., Lim, S., & Chi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm01735a · Cited by 83
Goudie, M. J., Brisbois, E. J., Pant, J., Thompson, A. J., Potkay, J. A., & Handa, H. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1163570 · Cited by 81
Deng, Y., Gao, X., Shi, X., Lu, S., Yang, W., Duan, C., & Chen, Z. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00290 · Cited by 81
Yucesoy, D. T., Hnilova, M., Boone, K., Arnold, P. M., Snead, M. L., & Tamerler, C. (2015) · JOM · doi:10.1007/s11837-015-1350-7 · Cited by 81
Charge-Switchable Polymeric Coating Kills Bacteria and Prevents Biofilm Formation in Vivo
Hoque, J., Ghosh, S., Krishnamoorthy, P., & Haldar, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11453 · Cited by 80
Hydrogel Nanospike Patch as a Flexible Anti-Pathogenic Scaffold for Regulating Stem Cell Behavior
Park, S., Park, H., Sun, K., Gwon, Y., Seong, M., Kim, S., Park, T., Hyun, H., Choung, Y., Kim, J., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b04109 · Cited by 80
Mussel foot protein-1 (mcfp-1) interaction with titania surfaces
Hwang, D. S., Harrington, M. J., Lu, Q., Mašić, A., Zeng, H., & Waite, J. H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32439c · Cited by 80
Wang, B., Wang, J., Li, D., Ren, K., & Ji, J. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.03.181 · Cited by 79
Ahonen, M. H., Kahru, A., Ivask, A., Kasemets, K., Kõljalg, S., Mantecca, P., Vrček, I. V., Keinänen‐Toivola, M. M., & Crijns, F. R. L. (2017) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph14040366 · Cited by 79
Membrane activity of antimicrobial phenylene ethynylene based polymers and oligomers
Wang, Y., Chi, E. Y., Schanze, K. S., & Whitten, D. G. (2012) · Soft Matter · doi:10.1039/c2sm25238d · Cited by 79
Song, D., Uhm, S., Lee, S. B., Han, J.-G., & Kim, K. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.01.385 · Cited by 79
The state of the art of osseointegration for limb prosthesis
Overmann, A. L., & Forsberg, J. A. (2019) · Biomedical Engineering Letters · doi:10.1007/s13534-019-00133-9 · Cited by 78
Andrade, F. A. C., Vercik, L. C. D. O., Monteiro, F. J., & Rigo, E. C. D. S. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.021 · Cited by 78
Cai, W., Wu, J., Xi, C., & Meyerhoff, M. E. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.07.027 · Cited by 77
Nanoscale Particle Therapies for Wounds and Ulcers
Cortivo, R., Vindigni, V., Iacobellis, L., Abatangelo, G., Pinton, P., & Zavan, B. (2010) · Nanomedicine · doi:10.2217/nnm.10.32 · Cited by 77
Singha, P., Pant, J., Goudie, M. J., Workman, C. D., & Handa, H. (2017) · Biomaterials Science · doi:10.1039/c6bm00948d · Cited by 77
Antimicrobial effects of nanofiber poly(caprolactone) tissue scaffolds releasing rifampicin
Ruckh, T. T., Floreani, R. A., Carroll, D. A., Mikhova, K. M., Bryers, J. D., & Popat, K. C. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4609-3 · Cited by 77
Environment‐Responsive Therapeutic Platforms for the Treatment of Implant Infection
Hu, Y., Li, S., Dong, H., Weng, L., Yuwen, L., Xie, Y., Yang, J., Shao, J., Song, X., Yang, D., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300985 · Cited by 77
A dual-functional PEEK implant coating for anti-bacterial and accelerated osseointegration
Yang, X., Wang, Q., Zhang, Y., He, H., Xiong, S., Chen, P., Li, C., Wang, L., Lu, G., & Xu, Y. (2023) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2023.113196 · Cited by 76
Fathi, M., Akbari, B., & Taheriazam, A. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109743 · Cited by 76
del Olmo, J. A., Alonso, J. M., Sáez‐Martínez, V., Cid, S. B., Moreno, I., Bengoa-Larrauri, M., Pérez-González, R., Vilas‐Vilela, J. L., & Pérez‐Álvarez, L. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212992 · Cited by 75
Antimicrobial properties and dentin bonding strength of magnesium phosphate cements
Mestres, G., Abdolhosseini, M., Bowles, W. R., Huang, S.-H., Aparicio, C., Gorr, S., & Ginebra, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.032 · Cited by 75
Vasilev, K. A., Poulter, N., Martinek, P., & Griesser, H. J. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201320a · Cited by 75
Acinetobacter baumannii Biofilm Formation in Human Serum and Disruption by Gallium
Runci, F., Bonchi, C., Frangipani, E., Visaggio, D., & Visca, P. (2016) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.01563-16 · Cited by 75
Tang, T., Lin, W., Tan, H., Duan, Z.-L., Yue, B., Ma, R., & He, G. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s57875 · Cited by 75
Deng, Y., Shi, X., Chen, Y., Yang, W., Ma, Y., Shi, X., Song, P., Dargusch, M. S., & Chen, Z. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02107 · Cited by 75
Eroy-Reveles, A. A., & Mascharak, P. K. (2009) · Future Medicinal Chemistry · doi:10.4155/fmc.09.111 · Cited by 73
Zhang, J., Song, H., Ji, S., Wang, X., Huang, P., Zhang, C., Wang, W., & Kong, D. (2018) · Nanoscale · doi:10.1039/c7nr08176f · Cited by 73
Tuning surface topographies on biomaterials to control bacterial infection
Khalid, S., Gao, A., Wang, G., Chu, P. K.-H., & Wang, H. (2020) · Biomaterials Science · doi:10.1039/d0bm00845a · Cited by 73
Wang, R., Xu, D., Liang, L., Xu, T., Liu, W., Ouyang, P., Chi, B., & Xu, H. L. (2016) · RSC Advances · doi:10.1039/c5ra15616e · Cited by 73
Zhang, Y., Zhang, L., Li, B., & Han, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00322 · Cited by 73
Metadata
- Authors
- Hetrick, E. M., & Schoenfisch, M. H.
- Affiliations
- University of North Carolina at Chapel Hill (US)
- Corresponding author
- Schoenfisch, Mark H.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 35
- Issue
- 9
- Pages
- 780
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2113751614
- Cited by
- 1,201
- References
- 46
- Citations by year
- 2026: 30 · 2025: 40 · 2024: 48 · 2023: 53 · 2022: 67 · 2021: 70 · 2020: 84 · 2019: 84 · 2018: 71 · 2017: 86 · 2016: 90 · 2015: 93 · 2014: 81 · 2013: 64 · 2012: 60
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemical Society Reviews (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Health Sciences › Medicine › Surgery › Orthopedic Infections and Treatments
- Keywords
- implant-associated infection, biofilm, bacterial adhesion, medical device coatings, antimicrobial release, silver ion release, nitric oxide, catheters, nosocomial infections, device-related infection
- MeSH terms
- Animals, Anti-Bacterial Agents, Bacterial Adhesion, Bacterial Infections, Humans, Nitric Oxide, Surgical Wound Infection, Implants, Experimental
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.