Reducing implant-related infections: active release strategies
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Despite sterilization and aseptic procedures, bacterial infection remains a major impediment to the utility of medical implants including catheters, artificial prosthetics, and subcutaneous sensors. Indwelling devices are responsible for over half of all nosocomial infections, with an estimate of 1 million cases per year (2004) in the United States alone. Device-associated infections are the result of bacterial adhesion and subsequent biofilm formation at the implantation site. Although useful for relieving associated systemic infections, conventional antibiotic therapies remain ineffective against biofilms. Unfortunately, the lack of a suitable treatment often leaves extraction of the contaminated device as the only viable option for eliminating the biofilm. Much research has focused on developing polymers that resist bacterial adhesion for use as medical device coatings. This tutorial review focuses on coatings that release antimicrobial agents (i.e., active release strategies) for reducing the incidence of implant-associated infection. Following a brief introduction to bacteria, biofilms, and infection, the development and study of coatings that slowly release antimicrobial agents such as antibiotics, silver ions, antibodies, and nitric oxide are covered. The success and limitations of these strategies are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ideally, all biomedical devices should be able to prevent bacterial colonization on their surfaces, especially within the first 6 h of blood exposure, which is identified to be the most susceptible and most “decisive period” for the success of a long-term implant.20”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“Nitric oxide (NO) has antimicrobial activity against a growing list of microorganisms, including bacteria, fungi, parasites, viruses, and yeast.20,111,120,127,177,281,282”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“The first 6 h after surgical implantation is highly susceptible to bacterial invasion and surface colonization, and has been coined the “decisive period” [299].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [299]
Citations
Cites
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Rubbo, H., Radi, R., Trujillo, M., Telleri, R., Kalyanaraman, B., Barnes, S., Kirk, M., & Freeman, B. A. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)47160-8 · Cited by 1,359
Fang, F. C. (1997) · Journal of Clinical Investigation · doi:10.1172/jci119473 · Cited by 1,149
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?
Furno, F., Morley, K. S., Wong, B., Sharp, B. L., Arnold, P. L., Howdle, S. M., Bayston, R., Brown, P. D., Winship, P. D., & Reid, H. J. (2004) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkh478 · Cited by 764
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Spinal-Fusion Surgery — The Case for Restraint
Deyo, R. A., Nachemson, A., & Mirza, S. K. (2004) · New England Journal of Medicine · doi:10.1056/nejmsb031771 · Cited by 515
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Research works printed but not linked: 1
- Raulli, 2002, Recent Res. Dev. Microbiol., 6, 177
Cited by
Items 301–400 of 1,000
Actis, L., Srinivasan, A., Lopez-Ribot, J. L., Ramasubramanian, A. K., & Ong, J. L. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5538-8 · Cited by 73
Lu, Y., Slomberg, D. L., Sun, B., & Schoenfisch, M. H. (2013) · Small · doi:10.1002/smll.201201798 · Cited by 72
Self-citationToniato, T. V., Rodrigues, B. V. M., Marsi, T. C. O., Ricci, R., Marciano, F. R., Webster, T. J., & Lobo, A. O. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.026 · Cited by 72
Acylase‐containing polyurethane coatings with anti‐biofilm activity
Grover, N., Plaks, J. G., Summers, S. R., Chado, G. R., Schurr, M. J., & Kaar, J. L. (2016) · Biotechnology and Bioengineering · doi:10.1002/bit.26019 · Cited by 72
Nanomaterials for Treating Bacterial Biofilms on Implantable Medical Devices
Tran, H. M., Tran, H. A., Booth, M. A., Fox, K. E., Nguyen, H. T., Tran, N. L., & Tran, P. A. (2020) · Nanomaterials · doi:10.3390/nano10112253 · Cited by 72
Li, W., Wang, H., Ding, Y., Scheithauer, E. C., Goudouri, O., Grünewald, A., Detsch, R., Agarwal, S., & Boccaccini, A. R. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00044k · Cited by 72
Advanced Immunomodulatory Biomaterials for Therapeutic Applications
Park, J., & Kim, D. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202304496 · Cited by 71
Contact‐Active Antimicrobial and Potentially Self‐Polishing Coatings Based on Cellulose
Bieser, A. M., Thomann, Y., & Tiller, J. C. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.201000306 · Cited by 71
Pallavicini, P., Dacarro, G., & Taglietti, A. (2018) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201800709 · Cited by 71
Biocompatible Nanocarrier Fortified with a Dipyridinium-Based Amphiphile for Eradication of Biofilm
Goswami, S., Thiyagarajan, D., Das, G. C., & Ramesh, A. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504779t · Cited by 71
Towards self‐sterilizing medical devices: controlling infection
Madkour, A. E., & Tew, G. N. (2007) · Polymer International · doi:10.1002/pi.2399 · Cited by 70
A Simultaneously Antimicrobial, Protein-Repellent, and Cell-Compatible Polyzwitterion Network
Kurowska, M., Eickenscheidt, A., Solarte, D. L. G., Widyaya, V. T., Marx, F., Al‐Ahmad, A., & Lienkamp, K. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00100 · Cited by 70
Responsive and “smart” antibacterial surfaces: Common approaches and new developments (Review)
Cavallaro, A., Taheri, S., & Vasilev, K. A. (2014) · Biointerphases · doi:10.1116/1.4866697 · Cited by 69
Asensio, G., Vázquez‐Lasa, B., & Rojo, L. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8111982 · Cited by 69
Surface Grafted Antimicrobial Polymer Networks with High Abrasion Resistance
Gao, J., Huddleston, N. E., White, E. M., Pant, J., Handa, H., & Locklin, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00221 · Cited by 69
Structural Characterization and Antifungal Studies of Zinc-Doped Hydroxyapatite Coatings
Iconaru, S. L., Prodan, A. M., Buton, N., & Predoi, D. (2017) · Molecules · doi:10.3390/molecules22040604 · Cited by 69
Gao, C., Wang, Y., Han, F., Yuan, Z., Li, Q., Shi, C., Cao, W., Zhou, P., Xing, X., & Li, B. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb02436c · Cited by 68
Magnesium alloy AZ91 exhibits antimicrobial properties in vitro but not in vivo
Brooks, E. K., Ahn, R., Tobias, M. E., Hansen, L. A., Luke‐Marshall, N. R., Wild, L. M., Campagnari, A. A., & Ehrensberger, M. T. (2017) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33839 · Cited by 68
del Olmo, J. A., Alonso, J. M., Sáez‐Martínez, V., Ruiz‐Rubio, L., González, R. P., Vilas‐Vilela, J. L., & Pérez‐Álvarez, L. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112102 · Cited by 68
Plasmon-Based Biofilm Inhibition on Surgical Implants
de Miguel, I., Prieto, I., Albornoz, A., Sanz, V., Weis, C., Turón, P., & Quidant, R. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b00187 · Cited by 68
Zhang, B., Hu, X., Zhu, Q., Wang, X., Zhao, X., Sun, C., Li, Y., & Hou, B. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.11.147 · Cited by 68
Synthesis and characterization of a bi-functional hydroxyapatite/Cu-doped TiO2 composite coating
Zhang, X., Yu, Y., Jiang, D., Jiao, Y., Wu, Y., Peng, Z., Zhou, J., Wu, J., & Dong, Z. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.12.158 · Cited by 68
Decreasing Bacterial Colonization of External Fixation Pins Through Nitric Oxide Release Coatings
Holt, J. B., Hertzberg, B., Weinhold, P. S., Storm, W. L., Schoenfisch, M. H., & Dahners, L. E. (2011) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0b013e3181f9ac8a · Cited by 67
Self-citationA Biodegradable Polycationic Paint that Kills Bacteria in Vitro and in Vivo
Hoque, J., Akkapeddi, P., Ghosh, C., Uppu, D. S. S. M., & Haldar, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09804 · Cited by 67
Biological responses of silver-coated thermosets: An in vitro and in vivo study
Marsich, E., Travan, A., Donati, I., Turco, G., Kulkova, J., Moritz, N., Aro, H. T., Crosera, M., & Paoletti, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.002 · Cited by 67
Anti‐ I nfectious Surfaces Achieved by Polymer Modification
Gour, N., Ngo, K. X., & Nardin, C. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300285 · Cited by 67
NIR Light-Driven Photocatalysis on Amphiphilic TiO2 Nanotubes for Controllable Drug Release
Zhao, J., Xu, J., Jian, X., Xu, J. B., Gao, Z., & Song, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04260 · Cited by 67
Harnessing biomolecules for bioinspired dental biomaterials
Fischer, N. G., Münchow, E. A., Tamerler, C., Bottino, M. C., & Aparicio, C. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01456g · Cited by 66
Hempel, F., Finke, B., Zietz, C., Bader, R., Weltmann, K., & Polák, M. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.01.027 · Cited by 66
Development of Luminescent pH Sensor Films for Monitoring Bacterial Growth Through Tissue
Wang, F., Raval, Y. S., Chen, H., Tzeng, T.-R. J., DesJardins, J. D., & Anker, J. N. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201300101 · Cited by 66
Williams, D. L., Haymond, B. S., Beck, J. P., Savage, P. B., Chaudhary, V., Epperson, R. T., Kawaguchi, B., & Bloebaum, R. D. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.08.003 · Cited by 66
del Olmo, J. A., Pérez‐Álvarez, L., Sáez‐Martínez, V., Cid, S. B., González, R. P., Vilas‐Vilela, J. L., & Alonso, J. M. (2022) · Gels · doi:10.3390/gels8040223 · Cited by 66
Sustained release of antibiotic from polyurethane coated implant materials
Basak, P., Adhikari, B., Banerjee, I., & Maiti, T. K. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3521-3 · Cited by 65
Gao, L., Liu, X., Xu, M., Sun, G. Z., Xu, S., Zou, T., Wang, L., Wang, F., Da, J., Wang, Y., et al. (2021) · Small · doi:10.1002/smll.202006815 · Cited by 65
Opportunities and challenges for the development of polymer-based biomaterials and medical devices
Yin, J., & Luan, S. (2016) · Regenerative Biomaterials · doi:10.1093/rb/rbw008 · Cited by 65
Gabriel, G. J., Pool, J. G., Som, A., Dabkowski, J. M., Coughlin, E. B., Muthukumar, M., & Tew, G. N. (2008) · Langmuir · doi:10.1021/la802232p · Cited by 65
Zhang, Y., Cui, J., Chen, K., Kuo, S. H., Sharma, J., Bhatta, R., Liu, Z., Ellis-Mohr, A. R., An, F., Li, J., et al. (2023) · Science Advances · doi:10.1126/sciadv.adg7397 · Cited by 64
Antimicrobial characteristics in Cu-containing Zr-based thin film metallic glass
Chu, J.-H., Lee, J., Chang, C.-C., Chan, Y.-C., Liou, M. L., Lee, J., Jang, J. S. C., & Duh, J.-G. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.05.019 · Cited by 64
Buxadera‐Palomero, J., Canal, C., Camarero, S. T., Garrido, B., Gil, F. J., & Rius, D. R. (2015) · Biointerphases · doi:10.1116/1.4913376 · Cited by 64
Design and synthesis of novel antibacterial peptide-resin conjugates
Won-Mi, C., Joshi, B. P., Cho, H., & Lee, K. (2007) · Bioorganic & Medicinal Chemistry Letters · doi:10.1016/j.bmcl.2007.08.056 · Cited by 64
Chen, R., Willcox, M. D. P., Cole, N., Ho, K. K. K., Rasul, R., Denman, J. A., & Kumar, N. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.029 · Cited by 64
Holla, G., Yeluri, R., & Munshi, A. K. (2012) · Contemporary Clinical Dentistry · doi:10.4103/0976-237x.103620 · Cited by 63
Zou, P., Laird, D. F., Riga, E. K., Deng, Z., Dorner, F., Perez-Hernandez, H.-R., Solarte, D. L. G., Steinberg, T., Al‐Ahmad, A., & Lienkamp, K. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00906e · Cited by 63
In vitro study on an antibacterial Ti–5Cu alloy for medical application
Ma, Z., Li, M., Liu, R., Ren, L., Zhang, Y., Pan, H., Zhao, Y., & Yang, K. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5698-1 · Cited by 63
Zhu, L., Tong, X., Ye, Z., Lin, Z., Zhou, T., Huang, S., Li, Y., Lin, J., Wen, C., & Ma, J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137946 · Cited by 63
Tan, J., Liu, Z., Wang, D., Zhang, X., Shi, Q., & Liu, X. (2020) · Biomaterials Science · doi:10.1039/c9bm01793c · Cited by 62
Halpenny, G. M., Steinhardt, R. C., Okialda, K. A., & Mascharak, P. K. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3795-0 · Cited by 62
Nanosilver: an inorganic nanoparticle with myriad potential applications
Rai, M. K., Birla, S. S., Ingle, A. P., Gupta, I. R., Gade, A., Abd-Elsalam, K. A., Marcato, P. D., & Durán, N. (2014) · Nanotechnology Reviews · doi:10.1515/ntrev-2014-0001 · Cited by 62
Raman, N., Lee, M., Palecek, S. P., & Lynn, D. M. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.05.026 · Cited by 63
Menthol-based deep eutectic systems as antimicrobial and anti-inflammatory agents for wound healing
Oliveira, F., Silva, E., Matias, A. A., Silva, J. M., Reis, R. L., & Duarte, A. R. C. (2022) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2022.106368 · Cited by 62
Wang, B., Ye, Z., Tang, Y., Han, Y., Lin, Q., Liu, H., Chen, H., & Nan, K. (2016) · International Journal of Nanomedicine · doi:10.2147/ijn.s107472 · Cited by 62
Si, Y., Liu, H., Yu, H., Jiang, X., & Sun, D. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.112840 · Cited by 62
Saigal, S., Irfan, M. A., Κhan, P., Abid, M., & Khan, M. M. (2019) · ACS Omega · doi:10.1021/acsomega.9b01571 · Cited by 61
Martínez‐Campos, E., Elzein, T., Bejjani, A., García-Granda, M. J., Santos‐Coquillat, A., Ramos, V., Muñoz‐Bonilla, A., & Rodríguez‐Hernández, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12832 · Cited by 60
Wang, Y., Wu, J., Zhang, D., Chen, F., Fan, P., Zhong, M., Xiao, S., Chang, Y., Gong, X., Yang, J., et al. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb01313j · Cited by 60
Ng, G., Li, M., Yeow, J., Jung, K., Pester, C. W., & Boyer, C. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15221 · Cited by 60
Yu, S., Guo, D., Han, J., Sun, L., Zhu, H., Yu, Z., Dargusch, M. S., & Wang, G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10032 · Cited by 60
Zhou, W., Jia, Z., Xiong, P., Yan, J., Li, M., Cheng, Y., & Zheng, Y. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.04.069 · Cited by 60
Advances of Hydroxyapatite Nanoparticles in Dental Implant Applications
Islam, M. A., Hossain, N., Hossain, S., Khan, F., Hossain, S., Arup, M. M. R., Chowdhury, M. A., & Rahman, M. M. (2025) · International Dental Journal · doi:10.1016/j.identj.2024.11.020 · Cited by 59
Chu, G., Guan, M., Jin, J., Luo, Y., Luo, Z., Shi, T., Liu, T., Zhang, C., & Wang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202311855 · Cited by 59
Zhang, B., Li, B., Gao, S., Li, Y., Cao, R., Cheng, J., Li, R., Wang, E., Guo, Y., Zhang, K., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108758 · Cited by 59
Zhao, Y., Ma, L.-B., Zeng, R., Tu, M., & Zhao, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.067 · Cited by 59
Ou, K., Weng, C.-C., Lin, Y., & Huang, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.120 · Cited by 59
Does Presoaking Synthetic Mesh in Antibiotic Solution Reduce Mesh Infections? An Experimental Study
Sadava, E. E., Krpata, D. M., Gao, Y., Novitsky, Y. W., & Rosen, M. J. (2012) · Journal of Gastrointestinal Surgery · doi:10.1007/s11605-012-2099-8 · Cited by 59
Kyzioł, A., Khan, W., Sebastián, V., & Kyzioł, K. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123888 · Cited by 58
New antibiotic agents and approaches to treat biofilm-associated infections
Lynch, A. S., & Abbanat, D. (2010) · Expert Opinion on Therapeutic Patents · doi:10.1517/13543776.2010.505923 · Cited by 58
Non-Equilibrium Plasma Processing for the Preparation of Antibacterial Surfaces
Sardella, E., Palumbo, F., Camporeale, G., & Favia, P. (2016) · Materials · doi:10.3390/ma9070515 · Cited by 58
Future antiviral polymers by plasma processing
Ma, C., Nikiforov, A. Y., Geyter, N. D., Dai, X., Morent, R., & Ostrikov, K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101410 · Cited by 58
Kirmanidou, Y., Sidira, M., Bakopoulou, A., Tsouknidas, A., Prymak, O., Papi, R. M., Choli‐Papadopoulou, T., Epple, M., Michailidis, N., Koidis, P. T., et al. (2019) · Dental Materials · doi:10.1016/j.dental.2019.06.003 · Cited by 58
O’Sullivan, C., O’Hare, P., O'Leary, N. D., Crean, A. M., Ryan, K. B., Dobson, A. D. W., & O’Neill, L. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31694 · Cited by 58
Rostaing, L. P. E., Moreau-Gaudry, X., Baron, E., Cisterne, J. M., Bernadet-Monrozies, P., & Durand, D. (1997) · PubMed · Cited by 57
Strategies to Mitigate and Treat Orthopaedic Device-Associated Infections
Kennedy, D. G., O’Mahony, A., Culligan, E. P., O’Driscoll, C. M., & Ryan, K. B. (2022) · Antibiotics · doi:10.3390/antibiotics11121822 · Cited by 57
Yazıcı, H., Habib, G., Boone, K., Ürgen, M., Utku, F. Ş., & Tamerler, C. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.09.030 · Cited by 57
Halpenny, G. M., Gandhi, K. R., & Mascharak, P. K. (2010) · ACS Medicinal Chemistry Letters · doi:10.1021/ml1000646 · Cited by 56
Carbonate substituted hydroxyapatite
Siddiqi, S. A., & Azhar, U. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102834-6.00006-9 · Cited by 56
Antibacterial Polyelectrolyte Micelles for Coating Stainless Steel
Falentin‐Daudre, C., Faure, E., Svaldo-Lanero, T., Farina, F., Jérôme, C., de Weerdt, C. V., MARTIAL, J. A., Duwez, A., & Detrembleur, C. (2012) · Langmuir · doi:10.1021/la3003965 · Cited by 56
Liang, T., Wang, Y., Zeng, L., Liu, Y., Qiao, L., Zhang, S., Zhao, R., Li, G., Zhang, R., Xiang, J., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.144717 · Cited by 56
Antimicrobial surface functionalization of PVC by a guanidine based antimicrobial polymer
Villanueva, M. E., González, J. A., Rodríguez-Castellón, E., Teves, S., & Copello, G. J. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.052 · Cited by 56
Elizabeth, E., Baranwal, G., Krishnan, A. G., Menon, D., & Nair, M. B. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/11/115101 · Cited by 56
Nano‐enabled Quenching of Bacterial Communications for the Prevention of Biofilm Formation
Gao, M., Xu, B., Huang, Y., Cao, J., Yang, L., Liu, X., Djumaev, A., Wu, D., Shoxiddinova, M., Cai, X., et al. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202305485 · Cited by 55
Sulemankhil, I., Ganopolsky, J. G., Dieni, C. A., Dan, A. F., Jones, M. L., & Prakash, S. (2012) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.01173-12 · Cited by 55
Fialho, L., Grenho, L., Fernandes, M. H., & Carvalho, S. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111761 · Cited by 55
Evaluation of the Antimicrobial Activity of Lysostaphin-Coated Hernia Repair Meshes
Satishkumar, R., Sankar, S., Yurko, Y. Y., Lincourt, A. E., Shipp, J. I., Heniford, B. T., & Vertegel, A. A. (2011) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.01056-10 · Cited by 55
Ashraf, S., Rehman, S. U., Sher, F., Khalid, Z. M., Mehmood, M., & Hussaın, I. (2013) · Cellulose · doi:10.1007/s10570-013-0129-7 · Cited by 55
Photoinitiated Nitric Oxide-Releasing Tertiary S-Nitrosothiol-Modified Xerogels
Riccio, D. A., Coneski, P. N., Nichols, S. P., Broadnax, A. D., & Schoenfisch, M. H. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201443r · Cited by 54
Self-citationNature-inspired surface modification strategies for implantable devices
Lee, S.-H., Yoo, S., Kim, S. H., Kim, Y., Han, S. I., & Lee, H. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101615 · Cited by 54
Doro, F. G., Filho, U. P. R., & Tfouni, E. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.11.013 · Cited by 54
Yang, C., Jeong, S., Ku, S., Lee, K., & Park, M. H. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.04.025 · Cited by 54
Anti-infective biomaterials with surface-decorated tachyplesin I
Xue, Q., Liu, X., Lao, Y., Wu, L., Wang, D., Zuo, Z., Chen, J., Hou, J., Bei, Y.-Y., Wu, X., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.05.008 · Cited by 54
Li, M., Mitra, D., Kang, E. T., Lau, T., Chiong, E., & Neoh, K. G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10240 · Cited by 55
A Versatile Surface Bioengineering Strategy Based on Mussel-Inspired and Bioclickable Peptide Mimic
Xiao, Y. M., Wang, W., Tian, X., Tan, X., Yang, T., Gao, P., Xiong, K., Tu, Q., Wang, M., Maitz, M. F., et al. (2020) · Research · doi:10.34133/2020/7236946 · Cited by 54
Mediating bone regeneration by means of drug eluting implants: From passive to smart strategies
Bagherifard, S. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.11.011 · Cited by 54
Thallinger, B., Argirova, M., Lesseva, M., Ludwig, R., Sygmund, C., Schlick, A., Nyanhongo, G. S., & Guebitz, G. M. (2014) · International Journal of Antimicrobial Agents · doi:10.1016/j.ijantimicag.2014.06.016 · Cited by 54
Engineered spider silk-based 2D and 3D materials prevent microbial infestation
Kumari, S., Lang, G., DeSimone, E. K., Spengler, C., Trossmann, V. T., Lücker, S., Hudel, M., Jacobs, K., Krämer, N., & Scheibel, T. (2020) · Materials Today · doi:10.1016/j.mattod.2020.06.009 · Cited by 54
Synthesis of Bioinorganic Antimicrobial Peptide Nanoparticles with Potential Therapeutic Properties
Eby, D. M., Farrington, K. E., & Johnson, G. R. (2008) · Biomacromolecules · doi:10.1021/bm800512e · Cited by 54
Xu, L., Fang, J., Pan, J., Qi, H., Yin, Y., He, Y., Gan, X., Li, Y., Li, Y., & Guo, J. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.08.009 · Cited by 53
Kratochvil, M. J., Tal-Gan, Y., Yang, T., Blackwell, H. E., & Lynn, D. M. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00313 · Cited by 53
Dacarro, G., Cucca, L., Grisoli, P., Pallavicini, P., Patrini, M., & Taglietti, A. (2012) · Dalton Transactions · doi:10.1039/c1dt11373a · Cited by 53
Biofilms, Biomaterials, and Device-Related Infections
Stoodley, P., Hall‐Stoodley, L., Costerton, B., DeMeo, P. J., Shirtliff, M. E., Gawalt, E. S., & Kathju, S. (2013) · Elsevier eBooks · doi:10.1016/b978-0-323-22805-3.00005-0 · Cited by 53
Surface Modification Techniques for Metallic Biomedical Alloys: A Concise Review
Omarov, S., Nauryz, N., Talamona, D., & Perveen, A. (2022) · Metals · doi:10.3390/met13010082 · Cited by 52
Metadata
- Authors
- Hetrick, E. M., & Schoenfisch, M. H.
- Affiliations
- University of North Carolina at Chapel Hill (US)
- Corresponding author
- Schoenfisch, Mark H.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 35
- Issue
- 9
- Pages
- 780
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2113751614
- Cited by
- 1,201
- References
- 46
- Citations by year
- 2026: 30 · 2025: 40 · 2024: 48 · 2023: 53 · 2022: 67 · 2021: 70 · 2020: 84 · 2019: 84 · 2018: 71 · 2017: 86 · 2016: 90 · 2015: 93 · 2014: 81 · 2013: 64 · 2012: 60
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemical Society Reviews (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Health Sciences › Medicine › Surgery › Orthopedic Infections and Treatments
- Keywords
- implant-associated infection, biofilm, bacterial adhesion, medical device coatings, antimicrobial release, silver ion release, nitric oxide, catheters, nosocomial infections, device-related infection
- MeSH terms
- Animals, Anti-Bacterial Agents, Bacterial Adhesion, Bacterial Infections, Humans, Nitric Oxide, Surgical Wound Infection, Implants, Experimental
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.