Reducing implant-related infections: active release strategies
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Despite sterilization and aseptic procedures, bacterial infection remains a major impediment to the utility of medical implants including catheters, artificial prosthetics, and subcutaneous sensors. Indwelling devices are responsible for over half of all nosocomial infections, with an estimate of 1 million cases per year (2004) in the United States alone. Device-associated infections are the result of bacterial adhesion and subsequent biofilm formation at the implantation site. Although useful for relieving associated systemic infections, conventional antibiotic therapies remain ineffective against biofilms. Unfortunately, the lack of a suitable treatment often leaves extraction of the contaminated device as the only viable option for eliminating the biofilm. Much research has focused on developing polymers that resist bacterial adhesion for use as medical device coatings. This tutorial review focuses on coatings that release antimicrobial agents (i.e., active release strategies) for reducing the incidence of implant-associated infection. Following a brief introduction to bacteria, biofilms, and infection, the development and study of coatings that slowly release antimicrobial agents such as antibiotics, silver ions, antibodies, and nitric oxide are covered. The success and limitations of these strategies are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ideally, all biomedical devices should be able to prevent bacterial colonization on their surfaces, especially within the first 6 h of blood exposure, which is identified to be the most susceptible and most “decisive period” for the success of a long-term implant.20”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“Nitric oxide (NO) has antimicrobial activity against a growing list of microorganisms, including bacteria, fungi, parasites, viruses, and yeast.20,111,120,127,177,281,282”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“The first 6 h after surgical implantation is highly susceptible to bacterial invasion and surface colonization, and has been coined the “decisive period” [299].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [299]
Citations
Cites
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Rubbo, H., Radi, R., Trujillo, M., Telleri, R., Kalyanaraman, B., Barnes, S., Kirk, M., & Freeman, B. A. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)47160-8 · Cited by 1,359
Fang, F. C. (1997) · Journal of Clinical Investigation · doi:10.1172/jci119473 · Cited by 1,149
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?
Furno, F., Morley, K. S., Wong, B., Sharp, B. L., Arnold, P. L., Howdle, S. M., Bayston, R., Brown, P. D., Winship, P. D., & Reid, H. J. (2004) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkh478 · Cited by 764
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Spinal-Fusion Surgery — The Case for Restraint
Deyo, R. A., Nachemson, A., & Mirza, S. K. (2004) · New England Journal of Medicine · doi:10.1056/nejmsb031771 · Cited by 515
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Research works printed but not linked: 1
- Raulli, 2002, Recent Res. Dev. Microbiol., 6, 177
Cited by
Items 401–500 of 1,000
Thermodynamic Investigation of Staphylococcus epidermidis Interactions with Protein-Coated Substrata
Liu, Y., Strauss, J. D., & Camesano, T. A. (2007) · Langmuir · doi:10.1021/la700575u · Cited by 52
Tan, J., Wang, C., Wang, D., Jiang, H., Qiao, Y., Zhang, D., Zhang, X., Xu, R., Liu, C., Su, J., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133940 · Cited by 52
Yu, Y., Ran, Q., Shen, X., Zheng, H., & Cai, K. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.110592 · Cited by 52
Zanocco, M., Boschetto, F., Zhu, W., Marin, E., McEntire, B. J., Bal, B. S., Adachi, T., Yamamoto, T., Kanamura, N., Ohgitani, E., et al. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103557 · Cited by 52
Edelstein, A. I., Weiner, J. A., Cook, R. W., Chun, D. S., Monroe, E. J., Mitchell, S. M., Kannan, A. S., Hsu, W. K., Stulberg, S. D., & Hsu, E. L. (2017) · Journal of Bone and Joint Surgery · doi:10.2106/jbjs.16.00127 · Cited by 52
Chu, W.-C., Yang, Y., Qin, S., Cai, J., Bai, M.-M., Kong, H., & Zhang, E. (2019) · Chemical Communications · doi:10.1039/c9cc00857h · Cited by 52
Complex Adaptable Systems based on Self‐Assembling Dendrimers and Dendrons: Toward Dynamic Materials
Roche, C., & Percec, V. (2013) · Israel Journal of Chemistry · doi:10.1002/ijch.201200099 · Cited by 52
Fabrication of silver-incorporated TiO2 nanotubes and evaluation on its antibacterial activity
Guo, Z., Chen, C., Gao, Q., Li, Y., & Zhang, L. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.09.081 · Cited by 52
Rapsch, K., Bier, F. F., TADROS, M. H., & Nickisch-Rosenegk, M. V. (2014) · Bioconjugate Chemistry · doi:10.1021/bc4004469 · Cited by 51
Smart responsive materials for antibacterial therapy: Progress, opportunities, and challenges
Fu, J., Wang, C., Liu, X., Zhu, S., Zheng, Y., Li, Z., Cui, Z., Zhang, Y., Jiang, H., Cao, Y., et al. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101532 · Cited by 51
Su, X., Hao, D., Li, Z., Guo, X., & Jiang, L. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb03278e · Cited by 51
Rumian, Ł., Tiainen, H., Cibor, U., Krok−Borkowicz, M., Brzychczy‐Włoch, M., Haugen, H. J., & Pamuła, E. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.065 · Cited by 51
Gao, L., Wang, Y., Li, Y., Xu, M., Sun, G. Z., Zou, T., Wang, F., Xu, S., Da, J., & Wang, L. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.07.025 · Cited by 50
Hlaing, S. P., Kim, J., Lee, J., Hasan, N., Cao, J., Naeem, M., Lee, E. H., Shin, J. H., Jung, Y., Lee, B.-L., et al. (2018) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.09.009 · Cited by 50
Protein-based layer-by-layer films for biomedical applications
Iqbal, M. H., Kerdjoudj, H., & Boulmedais, F. (2024) · Chemical Science · doi:10.1039/d3sc06549a · Cited by 50
Ke, Y., Liu, C., Zhang, X., Xiao, M., & Wu, G. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700258 · Cited by 50
Lin, L.-H., Chen, S.-C., Wu, C.-Z., Hung, J.-M., & Ou, K. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.01.065 · Cited by 50
Saneinezhad, S., Mohammadi, L., Zadsirjan, V., Bamoharram, F. F., & Heravi, M. M. (2020) · Scientific Reports · doi:10.1038/s41598-020-70738-z · Cited by 50
Silver doped perfluoropolyether-urethane coatings: Antibacterial activity and surface analysis
Stobie, N., Duffy, B., Hinder, S. J., McHale, P., & McCormack, D. E. (2009) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2009.03.014 · Cited by 50
Wang, H., Cheng, M., Hu, J., Wang, C., Xu, S., & Han, C. C.-C. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403250t · Cited by 49
Biomaterial Strategies to Reduce Implant-Associated Infections
Qiu, Y., Zhang, N., An, Y. H., & Wen, X. (2007) · The International Journal of Artificial Organs · doi:10.1177/039139880703000913 · Cited by 49
Khalil, F., Franzmann, E., Ramcke, J., Dakischew, O., Lips, K. S., Reinhardt, A., Heisig, P., & Maison, W. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.02.022 · Cited by 49
Influence of poly‐ l ‐lysine molecular weight on antibacterial efficacy in polymer multilayer films
Alkekhia, D., & Shukla, A. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36645 · Cited by 49
Plasma technology in antimicrobial surface engineering
Nikiforov, A. Y., Ma, C., Choukourov, A., & Palumbo, F. (2022) · Journal of Applied Physics · doi:10.1063/5.0066724 · Cited by 49
Fiedler, J., Kolitsch, A., Kleffner, B. V., Henke, D., Stenger, S., & Brenner, R. E. (2011) · The International Journal of Artificial Organs · doi:10.5301/ijao.5000022 · Cited by 49
A review of local antibiotic implants and applications to veterinary orthopaedic surgery
Moens, N. M. M., Gibson, T. W. G., & Hayes, G. M. (2013) · Veterinary and Comparative Orthopaedics and Traumatology · doi:10.3415/vcot-12-05-0065 · Cited by 49
Chemically Immobilized Antimicrobial Peptide on Polymer and Self-Assembled Monolayer Substrates
Xiao, M., Jasensky, J., Gerszberg, J., Chen, J., Tian, J., Lin, T., Lu, T., Lahann, J., & Chen, Z. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02377 · Cited by 49
Wo, Y., Li, Z., Colletta, A., Wu, J., Xi, C., Matzger, A. J., Brisbois, E. J., Bartlett, R. H., & Meyerhoff, M. E. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.03.027 · Cited by 48
Anchoring of Aminophosphonates on Titanium Oxide for Biomolecular Coupling
Canepa, P., Gonella, G., Pinto, G., Grachev, V., Canepa, M., & Cavalleri, O. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b04077 · Cited by 48
Wang, K., Gao, M., Fan, J., Huo, J., Liu, P., Ding, R., & Li, P. (2024) · ACS Nano · doi:10.1021/acsnano.4c04478 · Cited by 48
Gao, G., Cheng, J., Kindrachuk, J., Hancock, R. E. W., Straus, S. K., & Kizhakkedathu, J. N. (2012) · Chemistry & Biology · doi:10.1016/j.chembiol.2011.12.015 · Cited by 48
Kyomoto, M., Shobuike, T., Moro, T., Yamane, S., Takatori, Y., Tanaka, S., Miyamoto, H., & Ishihara, K. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.05.034 · Cited by 48
Baek, K.-H., Liang, J., Lim, W. T., Zhao, H., Kim, D. H., & Kong, H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03313 · Cited by 48
Fernández-Hernán, J. P., Torres, B., López, A. J., & Rams, J. (2022) · Gels · doi:10.3390/gels8070426 · Cited by 48
Fabrication of Biodegradable Polymeric Nanofibers with Covalently Attached NO Donors
Wold, K. A., Damodaran, V. B., Suazo, L. A., Bowen, R. A., & Reynolds, M. M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300383w · Cited by 47
Badar, M., Rahim, M. I., Kieke, M., Ebel, T., Rohde, M., Häuser, H., Behrens, P. J., & Mueller, P. P. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35358 · Cited by 47
Pezzotti, G., Bock, R. M., McEntire, B. J., Adachi, T., Marin, E., Boschetto, F., Zhu, W., Mazda, O., & Bal, B. S. (2018) · The Analyst · doi:10.1039/c8an00233a · Cited by 47
Zander, Z. K., Chen, P., Hsu, Y., Dreger, N. Z., Savariau, L., McRoy, W. C., Cerchiari, A. E., Chambers, S. D., Barton, H. A., & Becker, M. L. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.05.010 · Cited by 47
Hikku, G. S. O., Chandramouli, A., Robert, R., Jeyasubramanian, K., & Murugesan, R. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.06.005 · Cited by 47
Taha, M., Chai, F., Blanchemain, N., Neut, C., Goube, M., Maton, M., Martel, B., & Hildebrand, H. F. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.10.026 · Cited by 47
Eco-friendly nanocomposites derived from geranium oil and zinc oxide in one step approach
Al-Jumaili, A., Mulvey, P., Kumar, A., Prasad, K., Bazaka, K., Warner, J. M., & Jacob, M. V. (2019) · Scientific Reports · doi:10.1038/s41598-019-42211-z · Cited by 47
Silver activation on thin films of Ag–ZrCN coatings for antimicrobial activity
Ferreri, I., V., S. C., Galindo, R. E., Palacio, C., Henriques, M., Piedade, A. P., & Carvalho, S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.05.071 · Cited by 47
Han, A., Li, X., Huang, B., Tsoi, J. K. H., Matinlinna, J. P., Chen, Z., & Deng, D. (2016) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2016.03.018 · Cited by 47
Tetracycline-incorporated polymer nanofibers as a potential dental implant surface modifier
Bottino, M. C., Münchow, E. A., de Albuquerque, M. T. P., Kamocki, K., Shahi, R., Gregory, R. L., Chu, T. G., & Pankajakshan, D. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33743 · Cited by 47
Levofloxacin-loaded star poly(ε-caprolactone) scaffolds by additive manufacturing
Puppi, D., Piras, A. M., Pirosa, A., Sandreschi, S., & Chiellini, E. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5658-1 · Cited by 47
Candida albicans biofilm formation on peptide functionalized polydimethylsiloxane
Prijck, K. D., Smet, N. D., Rymarczyk‐Machał, M., Driessche, G. V., Devreese, B. V., Coenye, T., Schacht, E. H., & Nelis, H. J. C. F. (2010) · Biofouling · doi:10.1080/08927010903501908 · Cited by 46
Coordination chemistry of surface-grafted ligands for antibacterial materials
Pallavicini, P., Dacarro, G., Fernandez, Y. A. D., & Taglietti, A. (2014) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2014.04.013 · Cited by 46
Langowska, K., Kowal, J., Palivan, C. G., & Meier, W. P. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00277f · Cited by 46
Improvements in Clinical Durability From Functional Biomimetic Metallic Dental Implants
Al‐Zubaidi, S. M., Madfa, A. A., Mufadhal, A. A., Aldawla, M. A., Hameed, O. S., & Yue, G. X.-G. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.00106 · Cited by 46
In vitro evaluation of Ag doped hydroxyapatite coatings in acellular media
Vrânceanu, D. M., Pârău, A. C., Cotruț, C. M., Kiss, A. E., Constantin, L. R., Braic, V., & Vlădescu, A. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.02.191 · Cited by 46
Lee, F., Wang, D.-J., Chen, L.-K., Kung, C.-M., Wu, Y.-C., Ou, K., & Yu, C.-H. (2013) · Biofouling · doi:10.1080/08927014.2013.769967 · Cited by 46
Ishak, M. I., Jenkins, J., Kulkarni, S., Keller, T. F., Briscoe, W. H., Nobbs, A. H., & Su, B. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.06.173 · Cited by 46
Efficacy of surface-generated nitric oxide against Candida albicans adhesion and biofilm formation
Privett, B. J., Nutz, S. T., & Schoenfisch, M. H. (2010) · Biofouling · doi:10.1080/08927014.2010.534552 · Cited by 45
Self-citationCai, G., Wang, H., Jung, Y. K., Xu, Z., Zhang, J., He, J., Wang, D., Shin, J., Kaewmanee, R., Nabanita, S., et al. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107802 · Cited by 45
Wo, Y., Xu, L., Li, Z., Matzger, A. J., Meyerhoff, M. E., & Siedlecki, C. A. (2017) · Biomaterials Science · doi:10.1039/c7bm00108h · Cited by 45
Nanoantibiotics: A New Paradigm for the Treatment of Surgical Infection
Fernandez-Moure, J. S., Evangelopoulos, M., Colvill, K. M., Eps, J. L. V., & Tasciotti, E. (2017) · Nanomedicine · doi:10.2217/nnm-2017-0401 · Cited by 45
Harrasser, N., Jüssen, S., Banke, I. J., Kmeth, R., von Eisenhart‐Rothe, R., Stritzker, B., Gollwitzer, H., & Burgkart, R. (2015) · AMB Express · doi:10.1186/s13568-015-0162-z · Cited by 45
Gołda‐Cępa, M., Brzychczy‐Włoch, M., Engvall, K., Aminlashgari, N., Hakkarainen, M., & Kotarba, A. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.03.060 · Cited by 45
Huang, C., Chiang, H.-J., Lan, W.-C., Chou, H.-H., Ou, K., & Yu, C.-H. (2011) · Biofouling · doi:10.1080/08927014.2011.582642 · Cited by 45
Conformationally rigid proteomimetics: a case study in designing antimicrobial aryl oligomers
Gabriel, G. J., & Tew, G. N. (2008) · Organic & Biomolecular Chemistry · doi:10.1039/b714490n · Cited by 44
Dose controlled nitric oxide-based strategies for antibacterial property in biomedical devices
Mendhi, J., Asgari, M. S., Ratheesh, G., Prasadam, I., Yang, Y., & Xiao, Y. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100562 · Cited by 44
Xu, D., Yang, W., Hu, Y., Luo, Z. Y., Li, J., Hou, Y., Liu, Y., & Cai, K. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.04.050 · Cited by 44
Subramanian, S., Tolstaya, E. I., Winkler, T. E., Bentley, W. E., & Ghodssi, R. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04828 · Cited by 44
Shen, N., Cheng, E., Whitley, J. W., Horne, R. R., Leigh, B., Xu, L., Jones, B. D., Guymon, C. A., & Hansen, M. R. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01147 · Cited by 44
Gilabert‐Porres, J., Martí, S., Calatayud, L., Ramos, V., Rosell, A., & Borrós, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07115 · Cited by 44
Wang, M., Li, M., Wang, Y., Shao, Y., Zhu, Y., & Yang, S. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00098e · Cited by 44
Harding, J. L., & Reynolds, M. M. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21458c · Cited by 43
Michl, T. D., Coad, B. R., Doran, M., Osiecki, M., Kafshgari, M. H., Voelcker, N. H., Hüsler, A., Vasilev, K., & Griesser, H. J. (2015) · Chemical Communications · doi:10.1039/c5cc01722j · Cited by 43
Antimicrobial polysiloxane polymers and coatings containing pendant levofloxacin
Kugel, A. J., Chisholm, B. J., Ebert, S., Jepperson, M. J., Jarabek, L., & Stafslien, S. J. (2010) · Polymer Chemistry · doi:10.1039/b9py00309f · Cited by 43
Liu, D., He, C., Liu, Z., & Xu, W. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s137137 · Cited by 43
Recent Advances in Anti-inflammatory Strategies for Implantable Biosensors and Medical Implants
Lee, D., Park, K., & Seo, J. (2020) · BioChip Journal · doi:10.1007/s13206-020-4105-7 · Cited by 43
López‐García, J., Kuceková, Z., Humpolíček, P., Mlček, J., & Sáha, P. (2013) · Molecules · doi:10.3390/molecules181113435 · Cited by 43
Stobie, N., Duffy, B., Colreavy, J., McHale, P., Hinder, S. J., & McCormack, D. E. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.02.009 · Cited by 43
Antibacterial and cytotoxic assessment of poly (methyl methacrylate) based hybrid nanocomposites
Sathya, S., Murthy, P. S., Devi, V. G., Das, A., Anandkumar, B., Sathyaseelan, V. S., Doble, M., & Venugopalan, V. P. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.03.053 · Cited by 43
Li, H., Ogle, H., Jiang, B., Hagar, M., & Li, B. (2010) · Journal of Orthopaedic Research® · doi:10.1002/jor.21115 · Cited by 43
Li, Q., Bao, X., Sun, J., Cai, S., Xie, Y., Liu, Y., Liu, J. S., & Xu, G. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05592-5 · Cited by 43
Kohler, B., García‐Moreno, F., Bayon, Y., Pascual, G., & Bellón, J. M. (2015) · PLoS ONE · doi:10.1371/journal.pone.0126711 · Cited by 43
Zhang, Z., Wang, Z., Nong, J., Nix, C. A., Ji, H.-F., & Zhong, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015006 · Cited by 42
Wang, X., Wang, G., Zhao, J., Zhu, Z., & Rao, J. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00698 · Cited by 42
Bocu, R. (2024) · Biosensors · doi:10.3390/bios14050214 · Cited by 42
Protruding Nanostructured Surfaces for Antimicrobial and Osteogenic Titanium Implants
Ishak, M. I., Liu, X., Jenkins, J., Nobbs, A. H., & Su, B. (2020) · Coatings · doi:10.3390/coatings10080756 · Cited by 42
Xu, G., Shen, X., Dai, L., Ran, Q., Ma, P., & Cai, K. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.08.050 · Cited by 42
Bioengineering Approaches to Fight against Orthopedic Biomaterials Related-Infections
Barros, J., Monteiro, F. J., & Ferraz, M. P. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231911658 · Cited by 42
Anti-fungal activity of SiO2/Ag2S nanocomposites against Aspergillus niger
Fateixa, S., Neves, M. C., Almeida, A., Oliveira, J. A. B. P., & Trindade, T. (2009) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2009.07.037 · Cited by 42
Glucose Sensor Membranes for Mitigating the Foreign Body Response
Koh, A., Nichols, S. P., & Schoenfisch, M. H. (2011) · Journal of Diabetes Science and Technology · doi:10.1177/193229681100500505 · Cited by 41
Self-citationIn vivo hydroxyapatite scaffold performance in infected bone defects
Pearson, J. J., Gerken, N., Bae, C., Lee, K., Satsangi, A., McBride, S., Appleford, M. R., Dean, D. D., Hollinger, J. O., Ong, J. L., et al. (2019) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34466 · Cited by 41
Bi, W., Zhao, L., Zhu, W., Fang, L., & Ren, F. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.06.013 · Cited by 41
Maimaiti, Z., Li, Z. Y., Xu, C., Fu, J., Hao, L., Chen, J., & Chai, W. (2023) · Bioengineering · doi:10.3390/bioengineering10030356 · Cited by 41
Plant Secondary Metabolite-Derived Polymers: A Potential Approach to Develop Antimicrobial Films
Al-Jumaili, A., Kumar, A., Bazaka, K., & Jacob, M. V. (2018) · Polymers · doi:10.3390/polym10050515 · Cited by 41
Recent progress in bio-inspired biofilm-resistant polymeric surfaces
Cattò, C., Villa, F., & Cappitelli, F. (2018) · Critical Reviews in Microbiology · doi:10.1080/1040841x.2018.1489369 · Cited by 41
Molina, B. G., del Valle, L. J., Turón, P., Armelin, E. A., & Alemán, C. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b03982 · Cited by 41
Cui, J. H., Zhao, L., Zhu, W., Bi, W., Zhao, C., Fang, L., & Ren, F. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.06.022 · Cited by 41
Deng, S., Chen, A., Chen, W., Lai, J., Pei, Y., Wen, J., Yang, C., Luo, J., Zhang, J., Lei, C., et al. (2022) · Polymers · doi:10.3390/polym15010120 · Cited by 41
Siddiqui, M. A., Ullah, I., Liu, H., Zhang, S., Ren, L., & Yang, K. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.11.046 · Cited by 41
A Review on Applications of Superhydrophobic Materials in Civil Engineering
Wang, N., Wang, Q., & Xu, S. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202101238 · Cited by 40
Antimicrobial Medical Devices in Preclinical Development and Clinical Use
Brooks, B. D., Brooks, A. E., & Grainger, D. W. (2012) · Springer eBooks · doi:10.1007/978-1-4614-1031-7_13 · Cited by 40
Silver-Based Polymeric Nanocomposites as Antimicrobial Coatings for Biomedical Applications
Dhiman, N. K., Agnihotri, S., & Shukla, R. (2019) · Springer eBooks · doi:10.1007/978-981-13-6004-6_4 · Cited by 41
Choi, G., Jeong, G. M., Oh, M. S., Joo, M., Im, S. G., Jeong, K. J., & Lee, E. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00241 · Cited by 40
Jo, Y. K., Choi, B., Zhou, C., Ahn, J., Jun, S.-H., & Chi, H. J. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01230a · Cited by 40
Recent advances in the implant-based drug delivery in otorhinolaryngology
Tan, F., Zhu, Y., Ma, Z., & Al‐Rubeai, M. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.04.012 · Cited by 40
Metadata
- Authors
- Hetrick, E. M., & Schoenfisch, M. H.
- Affiliations
- University of North Carolina at Chapel Hill (US)
- Corresponding author
- Schoenfisch, Mark H.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 35
- Issue
- 9
- Pages
- 780
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2113751614
- Cited by
- 1,201
- References
- 46
- Citations by year
- 2026: 30 · 2025: 40 · 2024: 48 · 2023: 53 · 2022: 67 · 2021: 70 · 2020: 84 · 2019: 84 · 2018: 71 · 2017: 86 · 2016: 90 · 2015: 93 · 2014: 81 · 2013: 64 · 2012: 60
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemical Society Reviews (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Health Sciences › Medicine › Surgery › Orthopedic Infections and Treatments
- Keywords
- implant-associated infection, biofilm, bacterial adhesion, medical device coatings, antimicrobial release, silver ion release, nitric oxide, catheters, nosocomial infections, device-related infection
- MeSH terms
- Animals, Anti-Bacterial Agents, Bacterial Adhesion, Bacterial Infections, Humans, Nitric Oxide, Surgical Wound Infection, Implants, Experimental
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.