Reducing implant-related infections: active release strategies
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Despite sterilization and aseptic procedures, bacterial infection remains a major impediment to the utility of medical implants including catheters, artificial prosthetics, and subcutaneous sensors. Indwelling devices are responsible for over half of all nosocomial infections, with an estimate of 1 million cases per year (2004) in the United States alone. Device-associated infections are the result of bacterial adhesion and subsequent biofilm formation at the implantation site. Although useful for relieving associated systemic infections, conventional antibiotic therapies remain ineffective against biofilms. Unfortunately, the lack of a suitable treatment often leaves extraction of the contaminated device as the only viable option for eliminating the biofilm. Much research has focused on developing polymers that resist bacterial adhesion for use as medical device coatings. This tutorial review focuses on coatings that release antimicrobial agents (i.e., active release strategies) for reducing the incidence of implant-associated infection. Following a brief introduction to bacteria, biofilms, and infection, the development and study of coatings that slowly release antimicrobial agents such as antibiotics, silver ions, antibodies, and nitric oxide are covered. The success and limitations of these strategies are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ideally, all biomedical devices should be able to prevent bacterial colonization on their surfaces, especially within the first 6 h of blood exposure, which is identified to be the most susceptible and most “decisive period” for the success of a long-term implant.20”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“Nitric oxide (NO) has antimicrobial activity against a growing list of microorganisms, including bacteria, fungi, parasites, viruses, and yeast.20,111,120,127,177,281,282”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“The first 6 h after surgical implantation is highly susceptible to bacterial invasion and surface colonization, and has been coined the “decisive period” [299].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [299]
Citations
Cites
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Rubbo, H., Radi, R., Trujillo, M., Telleri, R., Kalyanaraman, B., Barnes, S., Kirk, M., & Freeman, B. A. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)47160-8 · Cited by 1,359
Fang, F. C. (1997) · Journal of Clinical Investigation · doi:10.1172/jci119473 · Cited by 1,149
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?
Furno, F., Morley, K. S., Wong, B., Sharp, B. L., Arnold, P. L., Howdle, S. M., Bayston, R., Brown, P. D., Winship, P. D., & Reid, H. J. (2004) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkh478 · Cited by 764
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Spinal-Fusion Surgery — The Case for Restraint
Deyo, R. A., Nachemson, A., & Mirza, S. K. (2004) · New England Journal of Medicine · doi:10.1056/nejmsb031771 · Cited by 515
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Research works printed but not linked: 1
- Raulli, 2002, Recent Res. Dev. Microbiol., 6, 177
Cited by
Items 501–600 of 1,000
Feasibility Study Exploring the Potential of Novel Battacin Lipopeptides as Antimicrobial Coatings
Zoysa, G. H. D., & Sarojini, V. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15859 · Cited by 40
Wojcieszak, D., Mazur, M., Kaczmarek, D., Mazur, P., Szponar, B., Domaradzki, J., & Kępiński, L. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.01.029 · Cited by 40
Li, L., Cheng, X., Huang, Q., Cheng, Y., Xiao, J., & Hu, J. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201286 · Cited by 40
Draining the moat: disrupting bacterial biofilms with natural products
Fletcher, M. H., Jennings, M. C., & Wuest, W. M. (2014) · Tetrahedron · doi:10.1016/j.tet.2014.06.055 · Cited by 39
Kinetic-dependent Killing of Oral Pathogens with Nitric Oxide
Backlund, C. J., Worley, B. V., Sergesketter, A. R., & Schoenfisch, M. H. (2015) · Journal of Dental Research · doi:10.1177/0022034515589314 · Cited by 39
Self-citationLipid-based carriers for controlled delivery of nitric oxide
Elnaggar, M. A., Subbiah, R., Han, D. K., & Joung, Y. K. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1285904 · Cited by 39
d'Britto, V., Kapse, H., Babrekar, H. A., Prabhune, A. A., Bhoraskar, S. V., Premnath, V., & Prasad, B. L. V. (2011) · Nanoscale · doi:10.1039/c1nr10154d · Cited by 39
Zhang, E., & Liu, C. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/4/045009 · Cited by 39
Recombinant Production of Mussel Byssus Inspired Proteins
Wang, J., & Scheibel, T. (2018) · Biotechnology Journal · doi:10.1002/biot.201800146 · Cited by 40
Siddiqui, S., Chandrasekaran, A., Lin, N., Tufenkji, N., & Moraes, C. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00803 · Cited by 39
Shi, C. Y., Gao, J., Wang, M., Shao, Y., Wang, L., Wang, D., & Zhu, Y. (2016) · Biomaterials Science · doi:10.1039/c6bm00009f · Cited by 38
Kratochvil, M. J., Yang, T., Blackwell, H. E., & Lynn, D. M. (2017) · ACS Infectious Diseases · doi:10.1021/acsinfecdis.6b00173 · Cited by 38
Yin, H., King, D. R., Sun, T. L., Saruwatari, Y., Nakajima, T., Kurokawa, T., & Gong, J. P. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15269 · Cited by 38
Antibacterial activity of a new broad‐spectrum antibiotic covalently bound to titanium surfaces
Gerits, E., Kucharíková, S., Dijck, P. V., Erdtmann, M., Krona, A., Lövenklev, M., Fröhlich, M., Dovgan, B., Impellizzeri, F., Braem, A., et al. (2016) · Journal of Orthopaedic Research® · doi:10.1002/jor.23238 · Cited by 38
Antibacterial properties of synthesized cyclic and linear cationic copolymers
Xu, J., Pu, L., Ma, J., Kumar, S. K., & Duan, H. (2020) · Polymer Chemistry · doi:10.1039/d0py00755b · Cited by 38
Anti-biofouling materials and surfaces based on mussel-inspired chemistry
Li, S., Chen, J., Wang, J., & Zeng, H. (2021) · Materials Advances · doi:10.1039/d1ma00053e · Cited by 38
Sodium Dodecyl Sulfate (SDS)-Loaded Nanoporous Polymer as Anti-Biofilm Surface Coating Material
Li, L., Molin, S., Yang, L., & Ndoni, S. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms14023050 · Cited by 38
A preliminary study on antibacterial mechanisms of silver ions implanted stainless steel
Chen, R., Ni, H., Zhang, H., Yue, G., Zhan, W., & Xiong, P. (2012) · Vacuum · doi:10.1016/j.vacuum.2012.05.025 · Cited by 38
Antimicrobial Activity of the Engineered Nanoparticles Used as Coating Agents
Swaminathan, M., & Sharma, N. K. (2019) · Springer eBooks · doi:10.1007/978-3-319-68255-6_1 · Cited by 38
Gouda, M., Aljaafari, A., Al-Fayz, Y., & Boraie, W. (2015) · Journal of Nanomaterials · doi:10.1155/2015/586904 · Cited by 38
Bio-inspired peptide decorated dendrimers for a robust antibacterial coating on hydroxyapatite
Gou, Y., Yang, X., He, L., Xu, X., Liu, Y., Liu, Y., Gao, Y., Huang, Q., Liang, K., Ding, C., et al. (2017) · Polymer Chemistry · doi:10.1039/c7py00811b · Cited by 38
Characterization of a novel active release coating to prevent biofilm implant‐related infections
Williams, D. L., Sinclair, K. D., Jeyapalina, S., & Bloebaum, R. D. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32918 · Cited by 38
Antibioadhesive Superhydrophobic Syringe Needles Inspired by Mussels and Lotus Leafs
Fan, L., Li, B., & Zhang, J. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500019 · Cited by 38
Wirth, S. M., Bertuccio, A. J., Cao, F., Lowry, G. V., & Tilton, R. D. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.12.049 · Cited by 38
Yu, J., Guan, Y., Yao, S., & Zhu, Z. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201294u · Cited by 38
Antimicrobial Coatings for Implant Surfaces
Brunetto, P. S., & Fromm, K. M. (2008) · CHIMIA International Journal for Chemistry · doi:10.2533/chimia.2008.249 · Cited by 38
Fabrication of nitric oxide-releasing polyurethane glucose sensor membranes
Koh, A., Riccio, D. A., Sun, B., Carpenter, A. W., Nichols, S. P., & Schoenfisch, M. H. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2011.06.005 · Cited by 37
Self-citationAntibacterial, anti-inflammatory and neuroprotective layer-by-layer coatings for neural implants
Zhang, Z., Nong, J., & Zhong, Y. (2015) · Journal of Neural Engineering · doi:10.1088/1741-2560/12/4/046015 · Cited by 37
Reducing Implant‐Related Infections: Active Release Strategies
Hetrick, E. M., & Schoenfisch, M. H. (2006) · ChemInform · doi:10.1002/chin.200648272 · Cited by 37
Self-citationCui, N., Jiajia, J., Li, M., Qi, H., Wu, X., & Tingli, L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109746 · Cited by 37
Polynitroxide copolymers to reduce biofilm fouling on surfaces
Boase, N. R. B., Torres, M. D. T., Fletcher, N. L., de la Fuente‐Núñez, C., & Fairfull‐Smith, K. E. (2018) · Polymer Chemistry · doi:10.1039/c8py01101j · Cited by 37
Wang, L., Shang, X., Hao, Y., Wan, G., Dong, L., Huang, D., Yang, X., Sun, J., Wang, Q., Zha, G., et al. (2019) · RSC Advances · doi:10.1039/c8ra09112a · Cited by 37
Siddiqui, M. A., Ullah, I., Kolawole, S. K., Peng, C., Wang, J., Ren, L., Yang, K., & Macdonald, D. D. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109693 · Cited by 37
Prevention of Candida albicans Biofilm Formation
Coenye, T. (2011) · The Open Mycology Journal · doi:10.2174/1874437001105010009 · Cited by 36
Effects of Materials Containing Antimicrobial Compounds on Food Hygiene
Møretrø, T., & Langsrud, S. (2011) · Journal of Food Protection · doi:10.4315/0362-028x.jfp-11-042 · Cited by 36
Dual-Function Polymer–Silver Nanocomposites for Rapid Killing of Microbes and Inhibiting Biofilms
Hoque, J., Yadav, V., Prakash, R. G., Sanyal, K., & Haldar, J. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00239 · Cited by 36
Synthesis and Characterization of Ultralow Fouling Poly(N-acryloyl-glycinamide) Brushes
Yang, F., Liu, Y., Zhang, Y., Ren, B., Xu, J., & Zheng, J. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b03435 · Cited by 36
Javadhesari, S. M., Alipour, S., & Akbarpour, M. R. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.02.127 · Cited by 36
New Antimicrobial and Biocompatible Implant Coating with Synergic Silver–Vancomycin Conjugate Action
Varisco, M., Khanna, N., Brunetto, P. S., & Fromm, K. M. (2014) · ChemMedChem · doi:10.1002/cmdc.201400072 · Cited by 36
Eco-friendly erucamide–polydimethylsiloxane coatings for marine anti-biofouling
Seo, E., Lee, J. W., Lee, D., Seong, M. R., Kim, G. H., Hwang, D. S., & Lee, S. J. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.112003 · Cited by 36
The Importance of Antibacterial Surfaces in Biomedical Applications
Benčina, M., Mavrič, T., Junkar, I., Bajt, A., Krajnović, A., Lakota, K., Žigon, P., Sodin‐Šemrl, S., Kralj‐Iglič, V., & Iglič, A. (2018) · Advances in biomembranes and lipid self-assembly · doi:10.1016/bs.abl.2018.05.001 · Cited by 35
Superhydrophobic nitric oxide-releasing xerogels
Storm, W. L., Youn, J., Reighard, K. P., Worley, B. V., Lodaya, H., Shin, J. H., & Schoenfisch, M. H. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.04.029 · Cited by 35
Self-citationde Oliveira, L. F., Gonçalves, K. D. A., Boreli, F. H., Kobarg, J., & Cardoso, M. B. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34899c · Cited by 35
Liu, X.-M., Zhang, Y., Chen, F., Khutsishvili, I., Fehringer, E. V., Marky, L. A., Bayles, K. W., & Wang, D. (2012) · Pharmaceutical Research · doi:10.1007/s11095-012-0812-7 · Cited by 35
Kumari, S., Bargel, H., & Scheibel, T. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900426 · Cited by 35
Guimond-Lischer, S., Ren, Q., Braissant, O., Gruner, P. J., Wampfler, B., & Maniura‐Weber, K. (2016) · Biointerphases · doi:10.1116/1.4943225 · Cited by 36
Hsueh, Y., Cheng, C., Chien, H., Huang, X.-H., Huang, C.-W., Wu, C.-H., Chen, S., & Ou, S. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154490 · Cited by 35
Sowa-Söhle, E. N., Schwenke, A., Wagener, P., Weiss, A., Wiegel, H., Sajti, C. L., Haverich, A., Barcikowski, S., & Loos, A. (2013) · BioNanoMaterials · doi:10.1515/bnm-2013-0012 · Cited by 34
Etayash, H., & Hancock, R. E. W. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13111820 · Cited by 35
Breitbach, A. S., Broderick, A. H., Jewell, C. M., Gunasekaran, S., Lin, Q., Lynn, D. M., & Blackwell, H. E. (2011) · Chemical Communications · doi:10.1039/c0cc02316g · Cited by 34
Biofunctionalization of surfaces using polyelectrolyte multilayers
Hartmann, H., & Krastev, R. (2017) · BioNanoMaterials · doi:10.1515/bnm-2016-0015 · Cited by 34
Corrosion‐Resistant Biomedical High‐Entropy Alloys: A Review
Shi, Z., Fang, Q., Liaw, P. K., & Li, J. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300968 · Cited by 34
Liu, X., Li, J., Qiao, Y., Zhu, H., & Meng, F. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s63807 · Cited by 34
Model peptide studies of Ag + binding sites from the silver resistance protein SilE
Chabert, V., Hologne, M., Sénèque, O., Crochet, A., Walker, O., & Fromm, K. M. (2017) · Chemical Communications · doi:10.1039/c7cc02630g · Cited by 34
Light‐activated Antibacterial Surfaces Comprise Photosensitizers
Cahan, R., Schwartz, R., Langzam, Y., & Nitzan, Y. (2011) · Photochemistry and Photobiology · doi:10.1111/j.1751-1097.2011.00989.x · Cited by 34
Ghimire, N., Luo, J., Tang, R., Sun, Y., & Deng, Y. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.06.060 · Cited by 34
The Trends of TiZr Alloy Research as a Viable Alternative for Ti and Ti16 Zr Roxolid Dental Implants
Ioniță, D., Pîrvu, C., Stoian, A. B., & Demetrescu, I. (2020) · Coatings · doi:10.3390/coatings10040422 · Cited by 34
Bone tissue response to titanium implant surfaces modified with carboxylate and sulfonate groups
Kerner, S. P., Migonney, V., Pavon‐Djavid, G., Hélary, G., Sedel, L., & Anagnostou, F. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3928-5 · Cited by 34
LIGNIN-CONTAINING POLYETHYLENE FILMS WITH ANTIBACTERIAL ACTIVITY
Gregorová, A., Redik, S., Sedlařík, V., & Stelzer, F. (2011) · Repository of TBU publications (Univerzita Tomase Bati ze Zline) · Cited by 34
Tang, Y., Zhao, Y. J., Wang, H., Gao, Y., Liu, X., Wang, X., & Lin, T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34116 · Cited by 34
Nigmatullin, R., Gao, F., & Konovalova, V. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900166 · Cited by 33
He, M., Wang, Q., Zhao, W., Li, J., & Zhao, C. (2017) · Polymer Chemistry · doi:10.1039/c7py00967d · Cited by 33
Mo, F., Ma, J., Yang, X., Zhang, P., Li, Q., & Zhang, J. (2020) · Phytomedicine · doi:10.1016/j.phymed.2020.153223 · Cited by 33
Wang, Q., Wang, L., Gao, L., Yu, L., Feng, W., Liu, N., Xu, M., Li, X., Li, P., & Huang, W. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00498j · Cited by 33
Xie, H., Liu, Y., An, H., Yi, J., Li, C., Wang, X., & Chai, W. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1053399 · Cited by 33
Pérez‐Álvarez, L., Ruiz‐Rubio, L., Azúa, I., Benito, V., Bilbao, A., & Vilas‐Vilela, J. L. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.12.038 · Cited by 33
Nanoporous aerogel as a bacteria repelling hygienic material for healthcare environment
Oh, J. K., Kohli, N., Zhang, Y., Min, Y., Jayaraman, A., Cisneros‐Zevallos, L., & Akbulut, M. E. S. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/8/085705 · Cited by 33
Makarov, C., Berdicevsky, I., Raz‐Pasteur, A., & Gotman, I. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4832-y · Cited by 33
Kao, W. K., Gagnon, P. M., Vogel, J. P., & Chole, R. A. (2017) · The Laryngoscope · doi:10.1002/lary.26499 · Cited by 33
Zirak, N., Maadani, A. M., Salahinejad, E., Abbasnezhad, N., & Shirinbayan, M. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.08.298 · Cited by 33
Metabolic Conditions and Peri-Implantitis
Benahmed, A. G., Gasmi, A., Tippairote, T., Mujawdiya, P. K., Авдєєв, О. В., Shanaida, Y., & Bjørklund, G. (2022) · Antibiotics · doi:10.3390/antibiotics12010065 · Cited by 33
Surface Design for Immobilization of an Antimicrobial Peptide Mimic for Efficient Anti‐Biofouling
Hasan, A., Lee, K., Tewari, K. M., Pandey, L. M., Messersmith, P. B., Faulds, K., Maclean, M., & Lau, K. H. A. (2020) · Chemistry - A European Journal · doi:10.1002/chem.202000746 · Cited by 33
Oshima, S., Sato, T., Honda, M., Suetsugu, Y., Ozeki, K., & Kikuchi, M. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21020551 · Cited by 33
Surface biofunctionalised porous materials: advances, challenges, and future prospects
Zhang, A., Wong, K. U., Xia, Y., Bilek, M., Yeo, G. C., & Akhavan, B. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101518 · Cited by 32
Microscopic and spectroscopic investigation of bioactive glasses for antibiotic controlled release
Cavalu, S. D., Bănică, F., Gruian, C., Vanea, E., Göller, G., & Simon, V. (2013) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2013.02.016 · Cited by 32
Xu, L., & Siedlecki, C. A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100614-6.00009-3 · Cited by 32
Guo, J., Zhou, H., Wang, J., Liu, W. X., Cheng, M., Peng, X., Qin, H., Wei, J., Jin, P., Li, J., et al. (2018) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2018.1452020 · Cited by 32
Soylu, H. M., Chevallier, P., Copes, F., Ponti, F., Candiani, G., Yurt, F., & Mantovani, D. (2021) · Frontiers in Cellular and Infection Microbiology · doi:10.3389/fcimb.2021.678081 · Cited by 32
Schneider‐Chaabane, A., Bleicher, V., Rau, S. J., Al‐Ahmad, A., & Lienkamp, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17781 · Cited by 32
Williams, D. L., Epperson, R. T., Ashton, N. N., Taylor, N. B., Kawaguchi, B., Olsen, R. E., Haussener, T. J., Sebahar, P. R., Allyn, G., & Looper, R. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.055 · Cited by 32
3D printing of drug-eluting bioactive multifunctional coatings for orthopedic applications
Adarkwa, E., Roy, A., Ohodnicki, J., Lee, B., Kumta, P. N., & Desai, S. S. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.661 · Cited by 32
Research of antibacterial activity on silver containing yttria-stabilized–zirconia bioceramic
Ou, S., Huang, M.-S., Chiou, S.-Y., & Ou, K. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.10.186 · Cited by 32
Westman, E.-H., Ek, M., & Wågberg, L. (2008) · Holzforschung · doi:10.1515/hf.2009.009 · Cited by 32
Chen, J., Zhu, Y., Song, Y., Wang, L., Zhan, J., He, J., Zheng, J., Zhong, C., Shi, X., Liu, S., et al. (2017) · Journal of Materials Chemistry B · doi:10.1039/c6tb03337g · Cited by 32
Li, P., Ding, Z., Yin, Y., Yu, X., Yuan, Y., Pérez, M. B., de Beer, S., Vancso, G. J., Yu, Y., & Zhang, S. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109845 · Cited by 31
Vaddiraju, S., Wang, Y., Qiang, L., Burgess, D. J., & Papadimitrakopoulos, F. (2012) · Analytical Chemistry · doi:10.1021/ac3022423 · Cited by 31
Antimicrobial Hydrogels: Key Considerations and Engineering Strategies for Biomedical Applications
Navare, K. J., Eggermont, L. J., Rogers, Z. J., Mohammed, H. S., Colombani, T., & Bencherif, S. A. (2020) · Springer eBooks · doi:10.1007/978-3-030-34475-7_22 · Cited by 31
Progress for the development of antibacterial surface based on surface modification technology
Huang, L., & Liu, C. (2022) · Supramolecular Materials · doi:10.1016/j.supmat.2022.100008 · Cited by 31
Dual action bactericides: Quaternary ammonium/N‐halamine‐functionalized cellulose fiber
Hu, B., Chen, X., Zuo, Y., Liu, Z., & Xing, X. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40070 · Cited by 31
Cometa, S., Bonifacio, M. A., Baruzzi, F., de Candia, S., Giangregorio, M. M., Giannossa, L. C., Dicarlo, M., Mattioli‐Belmonte, M., Sabbatini, L., & Giglio, E. D. (2017) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-017-0685-z · Cited by 31
Development of a Novel Model for the Assessment of Dead-Space Management in Soft Tissue
Oliver, R. A., Lovric, V., Yu, Y. Y., Christou, C., Aiken, S. S., Cooper, J. J., & Walsh, W. R. (2015) · PLoS ONE · doi:10.1371/journal.pone.0136514 · Cited by 31
Broderick, A. H., Breitbach, A. S., Frei, R., Blackwell, H. E., & Lynn, D. M. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200334 · Cited by 31
Sullivan, C. O., Neill, L. O., Leary, N. D. O., Gara, J. P. O., Crean, A. M., & Ryan, K. B. (2021) · Drug Delivery and Translational Research · doi:10.1007/s13346-021-00946-1 · Cited by 31
Ceragenins as Mimics of Endogenous Antimicrobial Peptides
Hashemi, M., Holden, B., DurnaAA, B., Buck, R., & Savage, P. B. (2017) · Journal of Antimicrobial Agents · doi:10.4172/2472-1212.1000141 · Cited by 31
Bioreactor validation and biocompatibility of Ag/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposites
Jovanović, Ž., Radosavljević, A. N., Kačarević‐Popović, Z., Stojkovska, J., Perić‐Grujić, A. A., Ristić, M. Đ., Matić, I. Z., Juranić, Z. D., Obradović, B., & Mišković‐Stanković, V. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.12.055 · Cited by 31
Nano-engineered titanium for enhanced bone therapy
Gulati, K., Atkins, G. J., Findlay, D. M., & Lošić, D. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2027151 · Cited by 31
Hidalgo-Robatto, B. M., Aguilera-Correa, J. J., López‐Álvarez, M., Romera, D., Esteban, J., González, P., & Serra, J. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.06.047 · Cited by 31
Zhang, X., Qiu, J., Tan, J., Zhang, D., Wu, L., Qiao, Y., Wang, G., Wu, J., Yeung, K., & Liu, X. (2022) · Carbon · doi:10.1016/j.carbon.2022.02.050 · Cited by 31
Lima, M., Teixeira-Santos, R., Gomes, L. C., Faria, S. I., Valcarcel, J., Vázquez, J. A., Cerqueira, M. A., Pastrana, L., Bourbon, A. I., & Mergulhão, F. J. (2021) · Molecules · doi:10.3390/molecules26144378 · Cited by 30
Gagnon, J., Clift, M. J. D., Vanhecke, D., Kuhn, D. A., Weber, P., Petri‐Fink, A., Rothen‐Rutishauser, B., & Fromm, K. M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c4tb02079k · Cited by 30
Metadata
- Authors
- Hetrick, E. M., & Schoenfisch, M. H.
- Affiliations
- University of North Carolina at Chapel Hill (US)
- Corresponding author
- Schoenfisch, Mark H.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 35
- Issue
- 9
- Pages
- 780
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2113751614
- Cited by
- 1,201
- References
- 46
- Citations by year
- 2026: 30 · 2025: 40 · 2024: 48 · 2023: 53 · 2022: 67 · 2021: 70 · 2020: 84 · 2019: 84 · 2018: 71 · 2017: 86 · 2016: 90 · 2015: 93 · 2014: 81 · 2013: 64 · 2012: 60
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemical Society Reviews (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Health Sciences › Medicine › Surgery › Orthopedic Infections and Treatments
- Keywords
- implant-associated infection, biofilm, bacterial adhesion, medical device coatings, antimicrobial release, silver ion release, nitric oxide, catheters, nosocomial infections, device-related infection
- MeSH terms
- Animals, Anti-Bacterial Agents, Bacterial Adhesion, Bacterial Infections, Humans, Nitric Oxide, Surgical Wound Infection, Implants, Experimental
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.