Reducing implant-related infections: active release strategies
The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Despite sterilization and aseptic procedures, bacterial infection remains a major impediment to the utility of medical implants including catheters, artificial prosthetics, and subcutaneous sensors. Indwelling devices are responsible for over half of all nosocomial infections, with an estimate of 1 million cases per year (2004) in the United States alone. Device-associated infections are the result of bacterial adhesion and subsequent biofilm formation at the implantation site. Although useful for relieving associated systemic infections, conventional antibiotic therapies remain ineffective against biofilms. Unfortunately, the lack of a suitable treatment often leaves extraction of the contaminated device as the only viable option for eliminating the biofilm. Much research has focused on developing polymers that resist bacterial adhesion for use as medical device coatings. This tutorial review focuses on coatings that release antimicrobial agents (i.e., active release strategies) for reducing the incidence of implant-associated infection. Following a brief introduction to bacteria, biofilms, and infection, the development and study of coatings that slowly release antimicrobial agents such as antibiotics, silver ions, antibodies, and nitric oxide are covered. The success and limitations of these strategies are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ideally, all biomedical devices should be able to prevent bacterial colonization on their surfaces, especially within the first 6 h of blood exposure, which is identified to be the most susceptible and most “decisive period” for the success of a long-term implant.20”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“Nitric oxide (NO) has antimicrobial activity against a growing list of microorganisms, including bacteria, fungi, parasites, viruses, and yeast.20,111,120,127,177,281,282”
From Recent advances in thromboresistant and antimicrobial polymers for biomedical applications: just say yes to nitric oxide (NO) (2016) · cites this paper as [20]
In the citing paper
“The first 6 h after surgical implantation is highly susceptible to bacterial invasion and surface colonization, and has been coined the “decisive period” [299].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [299]
Citations
Cites
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
Gristina, A. G. (1987) · Science · doi:10.1126/science.3629258 · Cited by 2,156
Biological Responses to Materials
Anderson, J. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.81 · Cited by 1,465
Rubbo, H., Radi, R., Trujillo, M., Telleri, R., Kalyanaraman, B., Barnes, S., Kirk, M., & Freeman, B. A. (1994) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(18)47160-8 · Cited by 1,359
Fang, F. C. (1997) · Journal of Clinical Investigation · doi:10.1172/jci119473 · Cited by 1,149
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
Silver nanoparticles and polymeric medical devices: a new approach to prevention of infection?
Furno, F., Morley, K. S., Wong, B., Sharp, B. L., Arnold, P. L., Howdle, S. M., Bayston, R., Brown, P. D., Winship, P. D., & Reid, H. J. (2004) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkh478 · Cited by 764
Silver ion release from antimicrobial polyamide/silver composites
Kumar, R., & Münstedt, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.030 · Cited by 739
Spinal-Fusion Surgery — The Case for Restraint
Deyo, R. A., Nachemson, A., & Mirza, S. K. (2004) · New England Journal of Medicine · doi:10.1056/nejmsb031771 · Cited by 515
Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks
Elisseeff, J. H., McIntosh, W., Anseth, K. S., Riley, S. L., Ragan, P. M., & Langer, R. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(200008)51:2<216::aid-jbm10>3.0.co;2-k · Cited by 510
Research works printed but not linked: 1
- Raulli, 2002, Recent Res. Dev. Microbiol., 6, 177
Cited by
Items 601–700 of 1,000
Song, J., Kawakami, K., & Ariga, K. (2023) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2023.101702 · Cited by 30
Rocas, P., Hoyos‐Nogués, M., Rocas, J., Manero, J. M., Gil, J., Alberício, F., & Mas‐Moruno, C. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500245 · Cited by 30
Sun, H. J., Yu, P., Peng, X., Meng, L., Qin, M., Xu, X., & Li, J. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c15478 · Cited by 30
Nanomaterials-mediated on-demand and precise antibacterial therapies
Cheng, S., Wang, Q., Qi, M., Sun, W., Wang, K., Li, W., Lin, J., Dong, B., & Wang, L. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111982 · Cited by 30
Guo, G., Zhou, H., Wang, Q., Wang, J., Tan, J., Li, J., Jin, P., & Shen, H. (2017) · Nanoscale · doi:10.1039/c6nr07729c · Cited by 30
Finke, B., Polák, M., Hempel, F., Rebl, H., Zietz, C., Straňák, V., Lukowski, G., Hippler, R., Bader, R., Nebe, B. J., et al. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201180054 · Cited by 30
Highly Efficient Antibacterial Surfaces Based on Bacterial/Cell Size Selective Microporous Supports
Vargas‐Alfredo, N., Santos‐Coquillat, A., Martínez‐Campos, E., Dorronsoro, A., Cortajarena, A. L., del Campo, A., & Rodríguez‐Hernández, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11337 · Cited by 30
Girard, J., Brunetto, P. S., Braissant, O., Rajacic, Z., Khanna, N., Landmann, R. M., Daniels, A. U., & Fromm, K. M. (2013) · Comptes Rendus Chimie · doi:10.1016/j.crci.2013.04.010 · Cited by 30
Shi, Z., Chua, P. H., Neoh, K. G., Kang, E. T., & Wang, W. (2008) · The International Journal of Artificial Organs · doi:10.1177/039139880803100905 · Cited by 29
Recent Advances in Multifunctional Hydrogels for the Treatment of Osteomyelitis
Xin, W., Gao, Y., & Yue, B. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.865250 · Cited by 29
Tuning the antimicrobial activity of low molecular weight hydrogels using dopamine autoxidation
Cross, E. R., Coulter, S. M., Fuentes‐Caparrós, A. M., McAulay, K., Schweins, R., Laverty, G., & Adams, D. J. (2020) · Chemical Communications · doi:10.1039/d0cc02569k · Cited by 29
Inhibition of Bacterial Biofilm Formation
Somma, A. D., Moretta, A., Canè, C., Cirillo, A., & Duilio, A. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.90614 · Cited by 29
Bacteria repelling poly(methylmethacrylate- co -dimethylacrylamide) coatings for biomedical devices
Venkateswaran, S., Wu, M. L., Gwynne, P. J., Hardman, A., Lilienkampf, A., Pernagallo, S., Blakely, G., Swann, D. G., Gallagher, M. P., & Bradley, M. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb01129e · Cited by 29
Polymers with Hemiaminal Ether Linkages for pH-Responsive Antibacterial Materials
Phoungtawee, P., Seidi, F., Treetong, A., Warin, C., Klamchuen, A., & Crespy, D. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00009 · Cited by 29
Innovative Antibacterial Polymer Coatings
Bryaskova, R. G., Philipova, N. D., Bakov, V. V., & Georgiev, N. I. (2025) · Applied Sciences · doi:10.3390/app15041780 · Cited by 29
Zarghami, V., Ghorbani, M., Bagheri, K. P., & Shokrgozar, M. A. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105440 · Cited by 29
Bacterial adhesion to diamond‐like carbon as compared to stainless steel
Soininen, A., Tiainen, V., Konttinen, Y. T., van der Mei, H. C., Busscher, H. J., & Sharma, P. K. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31359 · Cited by 29
Biocompatibility and antibacterial performance of titanium by surface treatment
Li, J., & Zhao, Y. (2009) · Journal of Coatings Technology and Research · doi:10.1007/s11998-009-9221-1 · Cited by 29
Dukhin, S. S., & Labib, M. E. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.04.040 · Cited by 29
A New Sterilization Technique of Bovine Pericardial Biomaterial Using Microwave Radiation
Shamis, Y., Patel, S., Taube, A., Morsi, Y., Sbarski, I., Shramkov, Y., Croft, R. J., Crawford, R. J., & Ivanova, E. P. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2008.0350 · Cited by 29
Mufty, H., den Bergh, M. V., Meuris, B., Metsemakers, W., & Fourneau, I. (2021) · European Journal of Vascular and Endovascular Surgery · doi:10.1016/j.ejvs.2021.09.020 · Cited by 28
Ma, R., Wang, W., Yang, P., Wang, C., Guo, D., & Wang, K. (2020) · BioMedical Engineering OnLine · doi:10.1186/s12938-020-0755-x · Cited by 28
Nanopillared Chitosan/Gelatin Films: A Biomimetic Approach for Improved Osteogenesis
Altuntaş, S., Dhaliwal, H. K., Bassous, N. J., Radwan, A., Alpaslan, P., Webster, T. J., Büyükserin, F., & Amiji, M. M. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00426 · Cited by 28
Creation of Hydrophilic Nitric Oxide Releasing Polymers via Plasma Surface Modification
Pegalajar‐Jurado, A., Joslin, J. M., Hawker, M. J., Reynolds, M. M., & Fisher, E. R. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502003z · Cited by 29
Jiang, T., Qi, L., Hou, C., Fang, S., & Qin, W. (2020) · Analytical Chemistry · doi:10.1021/acs.analchem.0c03099 · Cited by 28
Zeng, Y., Komasa, S., Nishida, H., Agariguchi, A., Sekino, T., & Okazaki, J. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21103533 · Cited by 28
Arif, S., Batool, A., Khalid, N., Ahmed, I., & Janjua, H. A. (2017) · RSC Advances · doi:10.1039/c6ra25806a · Cited by 28
Xu, Q., Liu, H., Ye, Z., Nan, K., Lin, S., Chen, H., & Wang, B. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.054 · Cited by 28
Wang, F., Wang, M., He, Q., Wang, X., Sun, P., Ji, Y., Niu, Y., Li, F., & Wei, J. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.05.054 · Cited by 28
Braem, A., Cremer, K. D., Delattin, N., Brucker, K. D., Neirinck, B., Vandamme, K., Martens, J. A., Michiels, J. J., Vleugels, J., Cammue, B. P. A., et al. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.12.054 · Cited by 28
Biomedical applications of carbon-nanotube composites
Meredith, J. R., Jin, C., Narayan, R. J., & Aggarwal, R. (2013) · Frontiers in Bioscience-Elite · doi:10.2741/e643 · Cited by 28
Atmospheric Pressure Plasma Polymerisation of D-Limonene and Its Antimicrobial Activity
Masood, A., Ahmed, N., Wee, M. F. M. R., Patra, A., Mahmoudi, E., & Siow, K. S. (2023) · Polymers · doi:10.3390/polym15020307 · Cited by 28
Polymer coatings for biomedical applications using atmospheric pressure plasma
Farhat, S., Gilliam, M. A., Rabago-Smith, M., Baran, C., Walter, N., & Zand, A. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.10.077 · Cited by 28
Li, L., Li, M., Li, D., He, P., Xia, H., Zhang, Y., & Mao, C. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00666f · Cited by 28
Nie, L., Deng, Y., Zhang, Y., Zhou, Q., Shi, Q., Zhong, S., Sun, Y., Yang, Z., Sun, M., Politis, C., et al. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50433 · Cited by 28
Host Response to Orthopedic Implants (Metals and Plastics)
Yao, Z., Lin, T., Pajarinen, J., Sato, T., & Goodman, S. B. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800196-7.00012-8 · Cited by 27
Silicone Surface with Drug Nanodepots for Medical Devices
Mokkaphan, J., Banlunara, W., Palaga, T., Sombuntham, P., & Wanichwecharungruang, S. P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505566m · Cited by 27
Pallavicini, P., Dacarro, G., Cucca, L., Denat, F., Grisoli, P., Patrini, M., Sok, N., & Taglietti, A. (2011) · New Journal of Chemistry · doi:10.1039/c0nj00829j · Cited by 27
Sinha, S., Chatterjee, S., Maiti, P. K., Tarafdar, S., & Moulik, S. P. (2017) · Progress in Biomaterials · doi:10.1007/s40204-017-0061-2 · Cited by 27
Ghosh, S., Mukherjee, R., Mahajan, V. S., Boucau, J., Pillai, S. S., & Haldar, J. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11915 · Cited by 27
Novel Antibacterial Coating on Orthopedic Wires To Eliminate Pin Tract Infections
Gil, D., Shuvaev, S., Frank‐Kamenetskii, A., Reukov, V. V., Gross, C. E., & Vertegel, A. A. (2017) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.00442-17 · Cited by 27
Babanejad, N., Nikje, M. M. A., Amini, M., & Dorkoosh, F. A. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39668 · Cited by 27
Wang, J., Cheng, Z., Chen, D., Li, G., Chen, J., Wang, K., Xu, L., & Huang, J. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.105805 · Cited by 27
Antibacterial 3D bone scaffolds for tissue engineering application
Pant, J., Sundaram, J., Goudie, M. J., Nguyen, D. T., & Handa, H. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34199 · Cited by 27
Preparation and properties of porous Zn-based scaffolds as biodegradable implants: a review
Zhao, L., Yuan, P., Zhang, M., Wang, X., Qi, Y., Wang, T., Cao, B., & Cui, C. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-08561-w · Cited by 27
Carvalho, Â., Peláez-Vargas, A., Gallego‐Perez, D., Grenho, L., Fernandes, M. H., Aza, A. H. D., Ferraz, M. P., Hansford, D. J., & Monteiro, F. J. (2012) · Dental Materials · doi:10.1016/j.dental.2012.09.002 · Cited by 27
Li, Y.-L., He, J., Ye, H.-X., Zhao, C., Zhu, W., Lu, X., & Ren, F. (2021) · Rare Metals · doi:10.1007/s12598-021-01852-8 · Cited by 27
Yabanoğlu, H., Arer, İ. M., & Çalışkan, K. (2015) · International Surgery · doi:10.9738/intsurg-d-14-00304.1 · Cited by 27
Novak, M. T., Bryers, J. D., & Reichert, W. M. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.11.025 · Cited by 26
Multicompartment Drug Release System for Dynamic Modulation of Tissue Responses
Morris, A. H., Mahal, R. S., Udell, J., Wu, M., & Kyriakides, T. R. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700370 · Cited by 26
New perspectives on the reactions of metal nitrosyls with thiolates as nucleophiles
Souza, M. L., Roveda, A. C., Pereira, J. C. M., & Franco, D. W. (2015) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.03.008 · Cited by 26
Zhang, X.-H., Wu, H., Huang, L., & Liu, C. (2018) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2018.02.002 · Cited by 26
Shi, Q., Qiao, Y., & Liu, X. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00973h · Cited by 26
Drug-delivery Ca-Mg silicate scaffolds encapsulated in PLGA
Jadidi, A., Salahinejad, E., Sharifi, E., & Tayebi, L. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119855 · Cited by 26
Performance evaluation of nanoclay enriched anti-microbial hydrogels for biomedical applications
Karnik, S. J., Jammalamadaka, U. M., Tappa, K. K., Giorno, R., & Mills, D. K. (2016) · Heliyon · doi:10.1016/j.heliyon.2016.e00072 · Cited by 26
Nitric oxide flux-dependent bacterial adhesion and viability at fibrinogen-coated surfaces
Nichols, S. P., & Schoenfisch, M. H. (2013) · Biomaterials Science · doi:10.1039/c3bm60130g · Cited by 25
Self-citationAIEgen‐Based Fluorescent Nanomaterials for Bacterial Detection and its Inhibition
Roy, E., Nagar, A., Chaudhary, S., & Pal, S. (2020) · ChemistrySelect · doi:10.1002/slct.201904092 · Cited by 25
A biocompatible PAA-Cu-MOP hydrogel for wound healing
Chen, L., Qin, Y., Cheng, J., Cheng, Y., Lu, Z., Liu, X., Yang, S., Lu, S., Zheng, L., & Cao, Q. (2020) · RSC Advances · doi:10.1039/c9ra10031h · Cited by 25
Pallavicini, P., Dacarro, G., Grisoli, P., Mangano, C., Patrini, M., Rigoni, F., Sangaletti, L., & Taglietti, A. (2012) · Dalton Transactions · doi:10.1039/c2dt32607h · Cited by 25
Contact Active Antimicrobial Coatings Prepared by Polymer Blending
Cuervo‐Rodríguez, R., López, F., Gómez-Garcés, J. L., Muñoz‐Bonilla, A., & Fernández‐García, M. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201700258 · Cited by 25
Wang, D., Su, L., Poelstra, K. A., Grainger, D. W., van der Mei, H. C., Shi, L., & Busscher, H. J. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.122576 · Cited by 25
Hibbard, H. A. J., & Reynolds, M. M. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00670 · Cited by 25
Hwang, J., Barman, S., Gao, R., Yang, X., O’Malley, A., Nagarkatti, P. S., Nagarkatti, M., Chruszcz, M., & Tang, C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301764 · Cited by 25
Ashton, N. N., Allyn, G., Porter, S. T., Haussener, T. J., Sebahar, P. R., Looper, R., & Williams, D. L. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.010 · Cited by 25
Yazdi, I. K., Murphy, M. B., Loo, C. P., Liu, X., Ferrari, M., Weiner, B. K., & Tasciotti, E. (2014) · Journal of Tissue Engineering · doi:10.1177/2041731414536573 · Cited by 25
Valiei, A., Okshevsky, M., Lin, N., & Tufenkji, N. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17634 · Cited by 25
Wu, J., Cheng, Y., Zhao, X., Liu, X., Sun, W., Ren, H., & Gao, B. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s75706 · Cited by 25
Rehman, M. A. U., & Batool, S. A. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09024-3 · Cited by 25
Samak, N. A., Selim, M. S., Hao, Z., & Xing, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.128035 · Cited by 25
Microstructure and enhanced strength-ductility of TiNbCu alloys produced by laser powder bed fusion
Jin, J., Yang, H., Liu, Y., Yang, J., Li, K., Yi, Y., Chen, D., Zhang, W., & Zhou, S. (2023) · Materials Science and Engineering A · doi:10.1016/j.msea.2023.145889 · Cited by 25
Sullivan, M., Kia, A. F.-A., Long, M., Walsh, M., Kavanagh, K. A., McClean, S., & Creaven, B. S. (2013) · Polyhedron · doi:10.1016/j.poly.2013.09.042 · Cited by 25
Modic, M., Kovač, J., Nicholls, J. R., Kos, Š., Serša, G., Cvelbar, U., & Walsh, J. L. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.05.153 · Cited by 25
Mussel-inspired silver-nanoparticle coating on porous titanium surfaces to promote mineralization
Chen, J., Mei, M. L., Li, Q., & Chu, C.-H. (2016) · RSC Advances · doi:10.1039/c6ra20673e · Cited by 24
Zhang, Z., Nix, C. A., Ercan, U. K., Gerstenhaber, J. A., Joshi, S. G., & Zhong, Y. (2014) · PLoS ONE · doi:10.1371/journal.pone.0084360 · Cited by 24
Antimicrobial design of titanium surface that kill sessile bacteria but support stem cells adhesion
Zhu, C., Bao, N.-R., Chen, S., & Zhao, J.-N. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.07.080 · Cited by 24
Xu, D., Lu, Z., Wang, T., Wang, S., Jiang, Y., Xu, Z., Bi, Z., & Geng, S. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109756 · Cited by 24
Controlling biofilm formation with nitroxide functional surfaces
Woehlk, H., Trimble, M. J., Mansour, S., Pletzer, D., Trouillet, V., Welle, A., Barner, L., Hancock, R. E. W., Barner‐Kowollik, C., & Fairfull‐Smith, K. E. (2019) · Polymer Chemistry · doi:10.1039/c9py00690g · Cited by 26
Chou, S., Gunaseelan, S., Kiellani, M. H. H., Thottempudi, V. V. K., Neuenschwander, P. F., & Nie, H. (2017) · Journal of Nanotechnology · doi:10.1155/2017/6341710 · Cited by 24
Slyamova, G., Gusmanov, A., Batpen, A., Kaliev, N., & Viderman, D. (2022) · Journal of Clinical Medicine · doi:10.3390/jcm11206072 · Cited by 24
Neiber, R. R., Samak, N. A., Xing, J., Elmongy, E. I., Galhoum, A. A., Sayed, I. E. T. E., Guibal, E., Xin, J., & Lü, X. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.133203 · Cited by 24
Liu, X., Sun, X., Huang, P., He, Y., Song, P., & Wang, R. (2023) · Langmuir · doi:10.1021/acs.langmuir.3c02258 · Cited by 24
Fabrication and properties of biodegradable ZnO nano-rods/porous Zn scaffolds
Zhao, L., Xie, Y., Zhang, Z., Wang, X., Qi, Y., Wang, T., Wang, R., & Cui, C. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.07.023 · Cited by 24
Biomechanical and antibacterial properties of Tobramycin loaded hydroxyapatite coated fixation pins
Sörensen, J. H., Lilja, M., Sörensen, T. C., Åstrand, M., Procter, P., Fuchs, S., Strømme, M., & Steckel, H. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33117 · Cited by 24
Frictional properties of light-activated antimicrobial polymers in blood vessels
Prokopovich, P., Perni, S., Piccirillo, C., Pratten, J. R., Parkin, I. P., & Wilson, M. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3882-2 · Cited by 24
Introduction to sterilization: definitions and challenges
Lerouge, S. (2012) · Elsevier eBooks · doi:10.1533/9780857096265.1 · Cited by 23
Evaluation of the Novel Antimicrobial BCP3 in a Coating for Endotracheal Tubes
Ozcelik, B., Pasic, P. J., Sangwan, P., Be, C. L., Glattauer, V., Thissen, H. W., & Boulos, R. A. (2020) · ACS Omega · doi:10.1021/acsomega.9b04178 · Cited by 23
Dual action antimicrobial surfaces via combined nitric oxide and silver release
Storm, W. L., Johnson, J. A., Worley, B. V., Slomberg, D. L., & Schoenfisch, M. H. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35331 · Cited by 23
Self-citationRestoring balance: biofilms and wound dressings
Percival, S. L. (2018) · Journal of Wound Care · doi:10.12968/jowc.2018.27.2.102 · Cited by 23
Boës, A.-K., Xiao, B., Megson, I. L., & Morris, R. E. (2008) · Topics in Catalysis · doi:10.1007/s11244-008-9137-5 · Cited by 23
Guerrero, G., Amalric, J., Mutin, P. H., Sotto, A., & Lavigne, J. (2008) · Pathologie Biologie · doi:10.1016/j.patbio.2008.07.032 · Cited by 23
A mechanistic study on the antibacterial behavior of silver doped bioceramic
Ou, S., Chung, R., Lin, L.-H., Chiang, Y. C., Huang, C., & Ou, K. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.158 · Cited by 23
Antimicrobial Surfaces for Applications on Confined Inhabited Space Stations
Wang, M., Duday, D., Scolan, E., Perbal, S., Prato, M., Lasseur, C., & Hołyńska, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202100118 · Cited by 23
Infection resistant biomaterials
Delaviz, Y., Santerre, J. P., & Cvitkovitch, D. G. (2015) · Elsevier eBooks · doi:10.1533/9780857097224.2.223 · Cited by 23
Ho, K. K. K., Ozcelik, B., Willcox, M. D. P., Thissen, H. W., & Kumar, N. (2017) · Chemical Communications · doi:10.1039/c7cc02772a · Cited by 23
Noninvasive Control of Bacterial Biofilms by Wireless Electrostimulation
Wang, H., Tampio, A. J. F., Xu, Y., Nicholas, B. D., & Ren, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01199 · Cited by 23
Goikoetxea, E., Routkevitch, D., Weerdt, A. D., Green, J. J., Steenackers, H. P. L., & Braeken, D. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.01.188 · Cited by 23
Baghani, M., Dolatabadi, R., & Baniassadi, M. (2017) · Scientia Iranica · doi:10.24200/sci.2017.4030 · Cited by 23
Enhancing the Fouling Resistance of Biocidal Urethane Coatings via Surface Chemistry Modulation
Coneski, P. N., Fulmer, P. A., & Wynne, J. H. (2012) · Langmuir · doi:10.1021/la300749a · Cited by 23
Prijck, K. D., Smet, N. D., Honraet, K., Christiaen, S. E. A., Coenye, T., Schacht, E. H., & Nelis, H. J. C. F. (2009) · Mycopathologia · doi:10.1007/s11046-009-9242-4 · Cited by 23
Antibacterial bioactive materials
Zhao, X. (2011) · Elsevier eBooks · doi:10.1533/9780857092939.2.97 · Cited by 23
Metadata
- Authors
- Hetrick, E. M., & Schoenfisch, M. H.
- Affiliations
- University of North Carolina at Chapel Hill (US)
- Corresponding author
- Schoenfisch, Mark H.
- Venue
- Chemical Society Reviews
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 35
- Issue
- 9
- Pages
- 780
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2113751614
- Cited by
- 1,201
- References
- 46
- Citations by year
- 2026: 30 · 2025: 40 · 2024: 48 · 2023: 53 · 2022: 67 · 2021: 70 · 2020: 84 · 2019: 84 · 2018: 71 · 2017: 86 · 2016: 90 · 2015: 93 · 2014: 81 · 2013: 64 · 2012: 60
- FWCI
- 1.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemical Society Reviews (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Immunology and Microbiology › Applied Microbiology and Biotechnology › Antimicrobial agents and applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Bacterial biofilms and quorum sensing
- Health Sciences › Medicine › Surgery › Orthopedic Infections and Treatments
- Keywords
- implant-associated infection, biofilm, bacterial adhesion, medical device coatings, antimicrobial release, silver ion release, nitric oxide, catheters, nosocomial infections, device-related infection
- MeSH terms
- Animals, Anti-Bacterial Agents, Bacterial Adhesion, Bacterial Infections, Humans, Nitric Oxide, Surgical Wound Infection, Implants, Experimental
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.