The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Thermodynamic analysis on energy densities of batteries
Abstract
The average increase in the rate of the energy density of secondary batteries has been about 3% in the past 60 years. Obviously, a great breakthrough is needed in order to increase the energy density from the current 210 Wh kg−1 of Li-ion batteries to the ambitious target of 500–700 Wh kg−1 to satisfy application in electrical vehicles. A thermodynamic calculation on the theoretical energy densities of 1172 systems is performed and energy storage mechanisms are discussed, aiming to determine the theoretical and practical limits of storing chemical energy and to screen possible systems. Among all calculated systems, the Li/F2 battery processes the highest energy density and the Li/O2 battery ranks as the second highest, theoretically about ten times higher than current Li-ion batteries. In this paper, energy densities of Li-ion batteries and a comparison of Li, Na, Mg, Al, Zn-based batteries, Li-storage capacities of the electrode materials and conversion reactions for energy storage, in addition to resource and environmental concerns, are analyzed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Carbon materials for the electrochemical storage of energy in capacitors
Frackowiak, E., & Béguin, F. (2001) · Carbon · doi:10.1016/s0008-6223(00)00183-4 · Cited by 4,523
Thermochemical data of pure substances
(1993) · Choice Reviews Online · doi:10.5860/choice.31-0632 · Cited by 4,494
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Prototype systems for rechargeable magnesium batteries
Aurbach, D., Lu, Z., Schechter, A., Gofer, Y., Gizbar, H., Turgeman, R., Cohen, Y., Moshkovich, M., & Levi, E. (2000) · Nature · doi:10.1038/35037553 · Cited by 2,355
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
Nanoionics: ion transport and electrochemical storage in confined systems
Maier, J. (2005) · Nature Materials · doi:10.1038/nmat1513 · Cited by 1,460
Recent advances in rechargeable battery materials: a chemist’s perspective
Palacín, M. R. (2009) · Chemical Society Reviews · doi:10.1039/b820555h · Cited by 1,423
Chemistry of intercalation compounds: Metal guests in chalcogenide hosts
Whittingham, M. S. (1978) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(78)90003-1 · Cited by 1,376
Nanoionics: ion transport and electrochemical storage in confined systems
MAIER, J. (2010) · Materials for Sustainable Energy · doi:10.1142/9789814317665_0023 · Cited by 1,202
All‐Solid Lithium Electrodes with Mixed‐Conductor Matrix
Boukamp, B. A., Lesh, G. C., & Huggins, R. A. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127495 · Cited by 1,160
Nishide, H., & Oyaizu, K. (2008) · Science · doi:10.1126/science.1151831 · Cited by 1,114
Conjugated dicarboxylate anodes for Li-ion batteries
Armand, M., Grugeon, S., Vezin, H., Laruelle, S., Ribière, P., Poizot, P., & Tarascon, J.-M. (2009) · Nature Materials · doi:10.1038/nmat2372 · Cited by 1,021
(1979) · Proceedings of the Analytical Division of the Chemical Society · doi:10.1039/ad9791600143 · Cited by 904
Identification of cathode materials for lithium batteries guided by first-principles calculations
Ceder, G., Chiang, Y.-M., Sadoway, D. R., Aydinol, M. K., Jang, Y.-I., & Huang, B. (1998) · Nature · doi:10.1038/33647 · Cited by 841
Aluminum as anode for energy storage and conversion: a review
Li, Q., & Bjerrum, N. J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01014-x · Cited by 670
From Biomass to a Renewable LiXC6O6 Organic Electrode for Sustainable Li‐Ion Batteries
Chen, H., Armand, M., Demailly, G., Dolhem, F., Poizot, P., & Tarascon, J. (2008) · ChemSusChem · doi:10.1002/cssc.200700161 · Cited by 662
Li, L., Ge, J., Wu, F., Chen, R., Chen, S., & Wu, B. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.11.026 · Cited by 647
Multi-electron reaction materials for high energy density batteries
Gao, X.-P., & Yang, H.-X. (2010) · Energy Environ. Sci. · doi:10.1039/b916098a · Cited by 624
Fully Reversible Homogeneous and Heterogeneous Li Storage in RuO2 with High Capacity
Balaya, P., Li, H., Kienle, L., & Maier, J. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200304406 · Cited by 605
Self-citationLi-Storage via Heterogeneous Reaction in Selected Binary Metal Fluorides and Oxides
Li, H., Balaya, P., & Maier, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1801451 · Cited by 590
Self-citationOn the Way to Rechargeable Mg Batteries: The Challenge of New Cathode Materials
Levi, E., Gofer, Y., & Aurbach, D. (2010) · Chemistry of Materials · doi:10.1021/cm9016497 · Cited by 546
Lithium Salt of Tetrahydroxybenzoquinone: Toward the Development of a Sustainable Li-Ion Battery
Chen, H., Armand, M., Courty, M., Jiang, M., Grey, C. P., Dolhem, F., Tarascon, J.-M., & Poizot, P. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9024897 · Cited by 490
Aluminum as anode for energy storage and conversion: a review
(2003) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(03)82893-x · Cited by 479
A laboratory-scale lithium-ion battery recycling process
Contestabile, M., Panero, S., & Scrosati, B. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00523-1 · Cited by 427
Suga, T., Ohshiro, H., Sugita, S., Oyaizu, K., & Nishide, H. (2009) · Advanced Materials · doi:10.1002/adma.200803073 · Cited by 404
Metal hydrides for lithium-ion batteries
Oumellal, Y., Rougier, A., Nazri, G. A., Tarascon, J.-M., & Aymard, L. (2008) · Nature Materials · doi:10.1038/nmat2288 · Cited by 395
The development of lithium ion secondary batteries
Nishi, Y. (2001) · The Chemical Record · doi:10.1002/tcr.1024 · Cited by 393
Li, H., Richter, G., & Maier, J. (2003) · Advanced Materials · doi:10.1002/adma.200304574 · Cited by 364
Self-citationRecycling rechargeable lithium ion batteries: Critical analysis of natural resource savings
Dewulf, J., Van der Vorst, G., Denturck, K., Van Langenhove, H., Ghyoot, W., Tytgat, J., & Vandeputte, K. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2009.08.004 · Cited by 348
A Solid Sulfur Cathode for Aqueous Batteries
Peramunage, D., & Licht, S. L. (1993) · Science · doi:10.1126/science.261.5124.1029 · Cited by 285
Ceder, G. (2010) · MRS Bulletin · doi:10.1557/mrs2010.681 · Cited by 257
Lithium intercalated compounds
Julien, C. M. (2003) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00104-3 · Cited by 206
Li, W., Li, C., Zhou, C., Ma, H., & Chen, J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600099 · Cited by 189
Mechanism of lithium storage in low temperature carbon
Wu, Y.-P., Wan, C.-R., Jiang, C.-Y., Fang, S.-B., & Jiang, Y.-Y. (1999) · Carbon · doi:10.1016/s0008-6223(99)00067-6 · Cited by 176
Ionothermal Synthesis of Tailor-Made LiFePO4 Powders for Li-Ion Battery Applications
Recham, N., Dupont, L., Courty, M., Djellab, K., Larcher, D., Armand, M. B., & Tarascon, J. ‐. (2009) · Chemistry of Materials · doi:10.1021/cm803259x · Cited by 155
Reversible Lithium Uptake by FeP[sub 2]
Silva, D. C. C., Crosnier, O., Ouvrard, G., Greedan, J. E., Sefat, A. S., & Nazar, L. F. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1588112 · Cited by 122
Study of lithium insertion in hard carbon made from cotton wool
Peled, E., Eshkenazi, V., & Rosenberg, Y. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00148-7 · Cited by 112
Contestabile, M., Panero, S., & Scrosati, B. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00261-x · Cited by 94
Heavy metal characterization of waste portable rechargeable batteries used in mobile phones
Nnorom, I. C., & Osibanjo, O. (2009) · International Journal of Environmental Science and Technology · doi:10.1007/bf03326105 · Cited by 57
Electrochemical power sources: 1. Rechargeable batteries
Shukla, A. K., & Martha, S. K. (2001) · Resonance · doi:10.1007/bf02835270 · Cited by 56
Influence of micropore structure on Li-storage capacity in hard carbon spherules
Hu, J., Li, H., & Huang, X. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.02.002 · Cited by 50
Self-citationHigh-Energy Portable Fuel Cell Power Sources
Narayan, S. R., & Valdez, T. I. (2008) · The Electrochemical Society Interface · doi:10.1149/2.f05084if · Cited by 46
Cited by
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Self-citationReview on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Self-citation
Metadata
- Authors
- Zu, C.-X., & Li, H.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 2614
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2010155940
- Cited by
- 911
- References
- 50
- FWCI
- 20.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.