The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Enhanced carbon dioxide capture upon incorporation of N,N′-dimethylethylenediamine in the metal–organic framework CuBTTri
Abstract
High capacity, high selectivity, and low-cost regeneration conditions are the most important criteria by which new adsorbents for post-combustion carbon dioxide capture will be judged. The incorporation of N,N′-dimethylethylenediamine (mmen) into H3[(Cu4Cl)3(BTTri)8 (CuBTTri; H3BTTri = 1,3,5-tri(1H-1,2,3-triazol-4-yl)benzene), a water-stable, triazolate-bridged framework, is shown to drastically enhance CO2 adsorption, resulting in one of the best performing metal–organic frameworks for CO2 separation reported to date. High porosity was maintained despite stoichiometric attachment of mmen to the open metal sites of the framework, resulting in a BET surface area of 870 m2 g−1. At 25 °C under a 0.15 bar CO2/0.75 bar N2 mixture, mmen-CuBTTri adsorbs 2.38 mmol CO2 g−1 (9.5 wt%) with a selectivity of 327, as determined using Ideal Adsorbed Solution Theory (IAST). The high capacity and selectivity are consequences of the exceptionally large isosteric heat of CO2 adsorption, calculated to be −96 kJ mol−1 at zero coverage. Infrared spectra support chemisorption between amines and CO2 as one of the primary mechanisms of uptake. Despite the large initial heat of adsorption, the CO2 uptake was fully reversible and the framework could be easily regenerated at 60 °C, enabling a cycling time of just 27 min with no loss of capacity over the course of 72 adsorption/desorption cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Self-citationThermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Structure Determination of Organic Compounds
Pretsch, E., Bühlmann, P., & Affolter, C. (2000) · Springer eBooks · doi:10.1007/978-3-662-04201-4 · Cited by 3,026
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Hwang, Y. K., Hong, D., Chang, J., Jhung, S. H., Seo, Y., Kim, J., Vimont, A., Daturi, M., Serre, C., & Férey, G. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705998 · Cited by 1,243
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Demessence, A., D’Alessandro, D. M., Foo, M. L., & Long, J. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja903411w · Cited by 1,115
Self-citationMason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
Self-citationVaidhyanathan, R., Iremonger, S. S., Shimizu, G. K. H., Boyd, P. G., Alavi, S., & Woo, T. K. (2010) · Science · doi:10.1126/science.1194237 · Cited by 927
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Can Metal–Organic Framework Materials Play a Useful Role in Large‐Scale Carbon Dioxide Separations?
Keskin, S., van Heest, T. M., & Sholl, D. S. (2010) · ChemSusChem · doi:10.1002/cssc.201000114 · Cited by 610
Yazaydın, A. Ö., Benin, A. I., Faheem, S. A., Jakubczak, P., Low, J. J., Willis, R. R., & Snurr, R. Q. (2009) · Chemistry of Materials · doi:10.1021/cm900049x · Cited by 588
Adsorption characteristics of carbon dioxide on organically functionalized SBA-15
Hiyoshi, N., Yogo, K., & Yashima, T. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.06.010 · Cited by 588
Metal Insertion in a Microporous Metal−Organic Framework Lined with 2,2′-Bipyridine
Bloch, E. D., Britt, D., Lee, C., Doonan, C. J., Uribe-Romo, F. J., Furukawa, H., Long, J. R., & Yaghi, O. M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106935d · Cited by 568
Self-citationChemical tuning of CO2 sorption in robust nanoporous organic polymers
Dawson, R., Adams, D. J., & Cooper, A. I. (2011) · Chemical Science · doi:10.1039/c1sc00100k · Cited by 568
Supported Absorption of CO2 by Tetrabutylphosphonium Amino Acid Ionic Liquids
Zhang, J., Zhang, S., Dong, K., Zhang, Y., Shen, Y., & Lv, X. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200501015 · Cited by 527
Vlugt, T. J. H., Krishna, R., & Smit, B. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp982736c · Cited by 484
Self-citationKizzie, A. C., Wong-Foy, A. G., & Matzger, A. J. (2011) · Langmuir · doi:10.1021/la200547k · Cited by 473
Enhancement of CO2/N2 selectivity in a metal-organic framework by cavity modification
Bae, Y.-S., Farha, O. K., Hupp, J. T., & Snurr, R. Q. (2009) · Journal of Materials Chemistry · doi:10.1039/b900390h · Cited by 392
An Investigation of Some Sterically Hindered Amines as Potential Carbon Dioxide Scrubbing Compounds
Hook, R. J. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9605589 · Cited by 361
Sumida, K., Horike, S., Kaye, S. S., Herm, Z. R., Queen, W. L., Brown, C. M., Grandjean, F., Long, G. J., Dailly, A., & Long, J. R. (2010) · Chemical Science · doi:10.1039/c0sc00179a · Cited by 347
Self-citationIn silico screening of metal–organic frameworks in separation applications
Krishna, R., & van Baten, J. M. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp20282k · Cited by 333
Self-citationComplexity behind CO2 Capture on NH2-MIL-53(Al)
Stavitski, E., Pidko, E. A., Couck, S., Remy, T., Hensen, E. J. M., Weckhuysen, B. M., Denayer, J., Gascon, J., & Kapteijn, F. (2011) · Langmuir · doi:10.1021/la1045207 · Cited by 310
Zelenak, V., Halamova, D., Gaberova, L., Bloch, E., & Llewellyn, P. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.023 · Cited by 297
Functionalized MOFs for Enhanced CO2 Capture
Torrisi, A., Bell, R. G., & Mellot-Draznieks, C. (2010) · Crystal Growth & Design · doi:10.1021/cg100646e · Cited by 293
Gas Adsorption Properties of the Chromium-Based Metal Organic Framework MIL-101
Chowdhury, P., Bikkina, C., & Gumma, S. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp811418r · Cited by 269
Improved immobilized carbon dioxide capture sorbents
Gray, M. L., Soong, Y., Champagne, K. J., Pennline, H., Baltrus, J. P., Stevens, R. W., Khatri, R., Chuang, S. S. C., & Filburn, T. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.005 · Cited by 250
Khatri, R. A., Chuang, S. S. C., Soong, Y., & Gray, M. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie048997s · Cited by 220
Berger, A. H., & Bhown, A. S. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.089 · Cited by 201
Using molecular simulations for screening of zeolites for separation of CO2/CH4 mixtures
Krishna, R., & van Baten, J. M. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.02.011 · Cited by 200
Self-citationReversible Chemisorbents for Carbon Dioxide and Their Potential Applications
Lee, K. B., Beaver, M. G., Caram, H. S., & Sircar, S. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800795y · Cited by 192
Investigation of entropy effects during sorption of mixtures of alkanes in MFI zeolite
Krishna, R. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(01)00253-4 · Cited by 119
Self-citation
Cited by
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Metal–Organic Frameworks for Separation
Zhao, X., Wang, Y., Li, D., Bu, X., & Feng, P. (2018) · Advanced Materials · doi:10.1002/adma.201705189 · Cited by 1,305
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Metadata
- Authors
- McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R.
- Venue
- Chemical Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 2
- Issue
- 10
- Pages
- 2022
- ISSN
- 2041-6520 (ISSN-L)
- 2041-6539
- OpenAlex
- W2101187042
- Cited by
- 522
- References
- 38
- FWCI
- 82.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.