The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Enhanced carbon dioxide capture upon incorporation of N,N′-dimethylethylenediamine in the metal–organic framework CuBTTri
Abstract
High capacity, high selectivity, and low-cost regeneration conditions are the most important criteria by which new adsorbents for post-combustion carbon dioxide capture will be judged. The incorporation of N,N′-dimethylethylenediamine (mmen) into H3[(Cu4Cl)3(BTTri)8 (CuBTTri; H3BTTri = 1,3,5-tri(1H-1,2,3-triazol-4-yl)benzene), a water-stable, triazolate-bridged framework, is shown to drastically enhance CO2 adsorption, resulting in one of the best performing metal–organic frameworks for CO2 separation reported to date. High porosity was maintained despite stoichiometric attachment of mmen to the open metal sites of the framework, resulting in a BET surface area of 870 m2 g−1. At 25 °C under a 0.15 bar CO2/0.75 bar N2 mixture, mmen-CuBTTri adsorbs 2.38 mmol CO2 g−1 (9.5 wt%) with a selectivity of 327, as determined using Ideal Adsorbed Solution Theory (IAST). The high capacity and selectivity are consequences of the exceptionally large isosteric heat of CO2 adsorption, calculated to be −96 kJ mol−1 at zero coverage. Infrared spectra support chemisorption between amines and CO2 as one of the primary mechanisms of uptake. Despite the large initial heat of adsorption, the CO2 uptake was fully reversible and the framework could be easily regenerated at 60 °C, enabling a cycling time of just 27 min with no loss of capacity over the course of 72 adsorption/desorption cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Self-citationThermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Structure Determination of Organic Compounds
Pretsch, E., Bühlmann, P., & Affolter, C. (2000) · Springer eBooks · doi:10.1007/978-3-662-04201-4 · Cited by 3,026
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Hwang, Y. K., Hong, D., Chang, J., Jhung, S. H., Seo, Y., Kim, J., Vimont, A., Daturi, M., Serre, C., & Férey, G. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705998 · Cited by 1,243
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
Cited by
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Self-citationCarbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Stable Metal–Organic Frameworks: Design, Synthesis, and Applications
Yuan, S., Feng, L., Wang, K., Pang, J., Bosch, M., Lollar, C., Sun, Y., Qin, J., Yang, X., Zhang, P., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704303 · Cited by 2,981
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Recent advances in gas storage and separation using metal–organic frameworks
Li, H., Wang, K., Sun, Y., Lollar, C. T., Li, J., & Zhou, H.-C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.006 · Cited by 1,571
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): A review
Khan, N. A., Hasan, Z., & Jhung, S. H. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.11.011 · Cited by 1,398
Cooperative insertion of CO2 in diamine-appended metal-organic frameworks
McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., et al. (2015) · Nature · doi:10.1038/nature14327 · Cited by 1,342
Self-citationMetal–Organic Frameworks for Separation
Zhao, X., Wang, Y., Li, D., Bu, X., & Feng, P. (2018) · Advanced Materials · doi:10.1002/adma.201705189 · Cited by 1,305
McDonald, T. M., Lee, W. R., Mason, J. A., Wiers, B. M., Hong, C. S., & Long, J. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300034j · Cited by 1,289
Self-citationHadjiivanov, K. I., Panayotov, D. A., Mihaylov, M. Y., Ivanova, E. Z., Chakarova, K. K., Andonova, S. M., & Drenchev, N. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00487 · Cited by 1,278
Construction of Ultrastable Porphyrin Zr Metal–Organic Frameworks through Linker Elimination
Feng, D., Chung, W.-C., Wei, Z., Gu, Z.-Y., Jiang, H.-L., Chen, Y.-P., Darensbourg, D. J., & Zhou, H.-C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408084j · Cited by 1,126
Coupling N2 and CO2 in H2O to synthesize urea under ambient conditions
Chen, C., Zhu, X., Wen, X., Zhou, Y., Zhou, L., Li, H., Tao, L., Li, Q., Du, S., Liu, T., et al. (2020) · Nature Chemistry · doi:10.1038/s41557-020-0481-9 · Cited by 1,087
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Microporous Metal-Organic Framework Materials for Gas Separation
Lin, R.-B., Xiang, S., Zhou, W., & Chen, B. (2020) · Chem · doi:10.1016/j.chempr.2019.10.012 · Cited by 942
Kökçam-Demir, Ü., Goldman, A., Esrafili, L., Gharib, M., Morsali, A., Weingart, O., & Janiak, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00609e · Cited by 895
Deria, P., Mondloch, J. E., Karagiaridi, O., Bury, W., Hupp, J. T., & Farha, O. K. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00067f · Cited by 877
Metal–organic frameworks based on flexible ligands (FL-MOFs): structures and applications
Lin, Z.-J., Lü, J., Hong, M., & Cao, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60483g · Cited by 874
Secondary building units as the turning point in the development of the reticular chemistry of MOFs
Kalmutzki, M. J., Hanikel, N., & Yaghi, O. M. (2018) · Science Advances · doi:10.1126/sciadv.aat9180 · Cited by 861
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Zhang, Z., Zhao, Y., Gong, Q., Li, Z., & Li, J. (2013) · Chem. Commun. · doi:10.1039/c2cc35561b · Cited by 609
Deria, P., Mondloch, J. E., Tylianakis, E., Ghosh, P., Bury, W., Snurr, R. Q., Hupp, J. T., & Farha, O. K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408959g · Cited by 591
Isoreticular chemistry within metal–organic frameworks for gas storage and separation
Fan, W., Zhang, X., Kang, Z., Liu, X., & Sun, D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.213968 · Cited by 584
Polyamine‐Tethered Porous Polymer Networks for Carbon Dioxide Capture from Flue Gas
Lu, W., Sculley, J. P., Yuan, D., Krishna, R., Wei, Z., & Zhou, H. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201202176 · Cited by 581
Self-citationSulfonate-Grafted Porous Polymer Networks for Preferential CO2 Adsorption at Low Pressure
Lu, W., Yuan, D., Sculley, J., Zhao, D., Krishna, R., & Zhou, H.-C. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2087773 · Cited by 571
Self-citationUnderstanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Yang, Q., Liu, D., Zhong, C., & Li, J.-R. (2013) · Chemical Reviews · doi:10.1021/cr400005f · Cited by 514
Flaig, R. W., Osborn Popp, T. M., Fracaroli, A. M., Kapustin, E. A., Kalmutzki, M. J., Altamimi, R. M., Fathieh, F., Reimer, J. A., & Yaghi, O. M. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06382 · Cited by 481
Metal organic frameworks mimicking natural enzymes: a structural and functional analogy
Nath, I., Chakraborty, J., & Verpoort, F. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00047a · Cited by 477
Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle
Jahandar Lashaki, M., Khiavi, S., & Sayari, A. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00877a · Cited by 460
Metal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage
Lin, Y., Kong, C., Zhang, Q., & Chen, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601296 · Cited by 443
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Self-citationPorous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Unconventional, Highly Selective CO2 Adsorption in Zeolite SSZ-13
Hudson, M. R., Queen, W. L., Mason, J. A., Fickel, D. W., Lobo, R. F., & Brown, C. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja210580b · Cited by 431
Pyrazolate-Based Porphyrinic Metal–Organic Framework with Extraordinary Base-Resistance
Wang, K., Lv, X.-L., Feng, D., Li, J., Chen, S., Sun, J., Song, L., Xie, Y., Li, J.-R., & Zhou, H.-C. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10881 · Cited by 419
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
Water-resistant porous coordination polymers for gas separation
Duan, J., Jin, W., & Kitagawa, S. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2016.11.004 · Cited by 394
Carbon dioxide capture and conversion by an acid-base resistant metal-organic framework
Liang, L., Liu, C., Jiang, F., Chen, Q., Zhang, L., Xue, H., Jiang, H.-L., Qian, J., Yuan, D., & Hong, M. (2017) · Nature Communications · doi:10.1038/s41467-017-01166-3 · Cited by 386
Mason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Jiang, H.-L., Feng, D., Liu, T.-F., Li, J.-R., & Zhou, H.-C. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3063919 · Cited by 379
Structuring adsorbents and catalysts by processing of porous powders
Akhtar, F., Andersson, L., Ogunwumi, S., Hedin, N., & Bergström, L. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.01.008 · Cited by 363
Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Zhao, X., Bu, X., Zhai, Q.-G., Tran, H., & Feng, P. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512137t · Cited by 355
Zhai, Q.-G., Bu, X., Mao, C., Zhao, X., & Feng, P. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13491 · Cited by 349
Linker functionalized metal-organic frameworks
Ali Akbar Razavi, S., & Morsali, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213023 · Cited by 341
Harnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42328j · Cited by 329
Chung, Y. G., Gómez-Gualdrón, D. A., Li, P., Leperi, K. T., Deria, P., Zhang, H., Vermeulen, N. A., Stoddart, J. F., You, F., Hupp, J. T., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600909 · Cited by 321
Ammonia Capture in Porous Organic Polymers Densely Functionalized with Brønsted Acid Groups
Van Humbeck, J. F., McDonald, T. M., Jing, X., Wiers, B. M., Zhu, G., & Long, J. R. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4105478 · Cited by 321
Self-citationPolyethyleneimine Incorporated Metal-Organic Frameworks Adsorbent for Highly Selective CO2 Capture
Lin, Y., Yan, Q., Kong, C., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01859 · Cited by 311
Qin, J.-S., Du, D.-Y., Li, W.-L., Zhang, J.-P., Li, S.-L., Su, Z.-M., Wang, X.-L., Xu, Q., Shao, K.-Z., & Lan, Y.-Q. (2012) · Chemical Science · doi:10.1039/c2sc00017b · Cited by 293
Controlling Cooperative CO2 Adsorption in Diamine-Appended Mg2(dobpdc) Metal–Organic Frameworks
Siegelman, R. L., McDonald, T. M., Gonzalez, M. I., Martell, J. D., Milner, P. J., Mason, J. A., Berger, A. H., Bhown, A. S., & Long, J. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05858 · Cited by 289
Self-citationMilner, P. J., Siegelman, R. L., Forse, A. C., Gonzalez, M. I., Runčevski, T., Martell, J. D., Reimer, J. A., & Long, J. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07612 · Cited by 288
Self-citationRecent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Metal cluster-based functional porous coordination polymers
Zhang, W.-X., Liao, P.-Q., Lin, R.-B., Wei, Y.-S., Zeng, M.-H., & Chen, X.-M. (2015) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2014.12.009 · Cited by 281
Xue, D.-X., Wang, Q., & Bai, J. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.10.026 · Cited by 280
An ultra-tunable platform for molecular engineering of high-performance crystalline porous materials
Zhai, Q.-G., Bu, X., Mao, C., Zhao, X., Daemen, L., Cheng, Y., Ramirez-Cuesta, A. J., & Feng, P. (2016) · Nature Communications · doi:10.1038/ncomms13645 · Cited by 279
Liao, P.-Q., Chen, H., Zhou, D.-D., Liu, S.-Y., He, C.-T., Rui, Z., Ji, H., Zhang, J.-P., & Chen, X.-M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02717e · Cited by 270
Zeolite-templated carbons – three-dimensional microporous graphene frameworks
Nishihara, H., & Kyotani, T. (2018) · Chemical Communications · doi:10.1039/c8cc01932k · Cited by 266
Versatile functionalization of the NU-1000 platform by solvent-assisted ligand incorporation
Deria, P., Bury, W., Hupp, J. T., & Farha, O. K. (2014) · Chemical Communications · doi:10.1039/c3cc48562e · Cited by 264
Amine-functionalized metal–organic frameworks: structure, synthesis and applications
Lin, Y., Kong, C., & Chen, L. (2016) · RSC Advances · doi:10.1039/c6ra01536k · Cited by 256
Liao, P.-Q., Chen, X.-W., Liu, S.-Y., Li, X.-Y., Xu, Y.-T., Tang, M., Rui, Z., Ji, H., Zhang, J.-P., & Chen, X.-M. (2016) · Chemical Science · doi:10.1039/c6sc00836d · Cited by 253
In silico Design of Porous Polymer Networks: High-Throughput Screening for Methane Storage Materials
Martin, R. L., Simon, C. M., Smit, B., & Haranczyk, M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4123939 · Cited by 170
Exceptional CO 2 working capacity in a heterodiamine-grafted metal–organic framework
Lee, W. R., Jo, H., Yang, L.-M., Lee, H., Ryu, D. W., Lim, K. S., Song, J. H., Min, D. Y., Han, S. S., Seo, J. G., et al. (2015) · Chemical Science · doi:10.1039/c5sc01191d · Cited by 153
Harding, J. L., Metz, J. M., & Reynolds, M. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201402529 · Cited by 67
Du, T., Fang, X., Liu, L., Shang, J., Zhang, B., Wei, Y., Gong, H., Rahman, S., May, E. F., Webley, P. A., et al. (2018) · Chemical Communications · doi:10.1039/c8cc00634b · Cited by 60
Metadata
- Authors
- McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R.
- Venue
- Chemical Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 2
- Issue
- 10
- Pages
- 2022
- ISSN
- 2041-6520 (ISSN-L)
- 2041-6539
- OpenAlex
- W2101187042
- Cited by
- 522
- References
- 38
- FWCI
- 82.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.