Effect of the state of distribution of supported Pt nanoparticles on effective Pt utilization in polymer electrolyte fuel cells
The DOI matches its Crossref record; 48 of the 49 references it cites were found in a registry or an index.
Abstract
In polymer electrolyte fuel cells, it is essential to minimize Pt loading, particularly at the cathode, without serious loss of performance. From this point of view, we will report an advanced concept for the design of high performance catalysts and membrane-electrode assemblies (MEAs): first, the evaluation of Pt particle distributions on both the interior and exterior walls of various types of carbon black (CB) particles used as supports with respect to the "effective surface (ES)"; second, control of both size and location of Pt particles by means of a new preparation method (nanocapsule method); and finally, a new evaluation method for the properties of MEAs based on the Pt utilization (UPt), mass activity (MA), and effectiveness of Pt (EfPt), based on the ES concept. The amounts of Pt catalyst particles located in the CB nanopores were directly evaluated using the transmission electron microscopy, scanning electron microscopy and corresponding three-dimensional images. By use of the nanocapsule method and optimization of the ionomer, increased MA and EfPt values for the MEA were achieved. The improvement in the cathode performance can be attributed to the sharp particle-size distribution for Pt and the highly uniform dispersion on the exterior surface of graphitized carbon black (GCB) supports.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, for Pt/Ketjen, Ketjen carbon black is a porous carbon support and has a high surface area and abundant internal pore; only ∼50% or even less than 50% of Pt nanoparticles reside on the external surface [87,88].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [87]
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Yang, D., Velamakanni, A., Bozoklu, G., Park, S., Stoller, M., Piner, R. D., Stankovich, S., Jung, I., Field, D. A., Ventrice, C. A., et al. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.045 · Cited by 3,260
Watanabe, M., & Motoo, S. (1975) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(75)80261-0 · Cited by 1,263
Self-citationComparison of high surface Pt/C catalysts by cyclic voltammetry
Pozio, A., De Francesco, M., Cemmi, A., Cardellini, F., & Giorgi, L. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00921-1 · Cited by 906
Surface characterization of electrochemically oxidized carbon fibers
Yue, Z. R., Jiang, W., Wang, L., Gardner, S. D., & Pittman, C. U. (1999) · Carbon · doi:10.1016/s0008-6223(99)00047-0 · Cited by 647
Degradation Mechanisms of Pt/C Fuel Cell Catalysts under Simulated Start–Stop Conditions
Meier, J. C., Galeano, C., Katsounaros, I., Topalov, A. A., Kostka, A., Schüth, F., & Mayrhofer, K. J. J. (2012) · ACS Catalysis · doi:10.1021/cs300024h · Cited by 586
Wilson, M. S., Valerio, J. A., & Gottesfeld, S. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(94)00272-3 · Cited by 476
Advanced Platinum Alloy Electrocatalysts for the Oxygen Reduction Reaction
Wang, C., Markovic, N. M., & Stamenkovic, V. R. (2012) · ACS Catalysis · doi:10.1021/cs3000792 · Cited by 440
Mesostructured thin films as electrocatalysts with tunable composition and surface morphology
van der Vliet, D. F., Wang, C., Tripkovic, D., Strmcnik, D., Zhang, X. F., Debe, M. K., Atanasoski, R. T., Markovic, N. M., & Stamenkovic, V. R. (2012) · Nature Materials · doi:10.1038/nmat3457 · Cited by 356
Research works printed but not linked: 1
- Gasteiger, 2005, Appl. Catal., B, 56, 9, 10.1016/j.apcatb.2004.06.021 · DOI · Paper page
Cited by
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Self-citationHou, J., Yang, M., Ke, C., Wei, G., Priest, C., Qiao, Z., Wu, G., & Zhang, J. (2020) · EnergyChem · doi:10.1016/j.enchem.2019.100023 · Cited by 246
Ahn, C.-Y., Park, J. E., Kim, S., Kim, O.-H., Hwang, W., Her, M., Kang, S. Y., Park, S., Kwon, O. J., Park, H. S., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01337 · Cited by 239
Speder, J., Zana, A., Spanos, I., Kirkensgaard, J. J. K., Mortensen, K., Hanzlik, M., & Arenz, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.039 · Cited by 204
Ma, J., Habrioux, A., Luo, Y., Ramos-Sanchez, G., Calvillo, L., Granozzi, G., Balbuena, P. B., & Alonso-Vante, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01285f · Cited by 184
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
Padgett, E., Andrejevic, N., Liu, Z., Kongkanand, A., Gu, W., Moriyama, K., Jiang, Y., Kumaraguru, S., Moylan, T. E., Kukreja, R., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0541803jes · Cited by 156
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Tailoring Catalyst Morphology towards High Performance for Low Pt Loaded PEMFC Cathodes
Harzer, G. S., Orfanidi, A., El-Sayed, H., Madkikar, P., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311810jes · Cited by 146
Yang, G., Lee, C., Qiao, X., Babu, S. K., Martinez, U., & Spendelow, J. S. (2024) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00208-3 · Cited by 156
“3), or covered with a thick ionomer film, will lose electron, proton, or oxygen transport paths, limiting the formation of triple-phase boundaries and resulting in low catalyst utilization [42, 59].”
InfluentialParticle-size effect of Pt cathode catalysts on durability in fuel cells
Yano, H., Watanabe, M., Iiyama, A., & Uchida, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.016 · Cited by 135
Self-citationPorous materials: The next frontier in energy technologies
Farber, E. M., Seraphim, N. M., Tamakuwala, K. N., Stein, A., Rücker, M., & Eisenberg, D. (2025) · Science · doi:10.1126/science.adn9391 · Cited by 163
Bhuvanendran, N., Ravichandran, S., Xu, Q., Maiyalagan, T., & Su, H. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.12.072 · Cited by 147
Park, Y.-C., Kakinuma, K., Uchida, H., Watanabe, M., & Uchida, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.149 · Cited by 123
Self-citationYan, X., Xu, Z., Yuan, S., Han, A., Shen, Y., Cheng, X., Liang, Y., Shen, S., & Zhang, J. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231523 · Cited by 131
Shahgaldi, S., Ozden, A., Li, X., & Hamdullahpur, F. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.078 · Cited by 121
Garsany, Y., Atkinson, R. W., Sassin, M. B., Hjelm, R. M. E., Gould, B. D., & Swider-Lyons, K. E. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1361805jes · Cited by 116
Huang, J., Li, Z. Y., & Zhang, J. (2017) · Frontiers in Energy · doi:10.1007/s11708-017-0490-6 · Cited by 121
“They assume that the utilization and effectiveness of Pt nanoparticles in ionomer-free micropores is rather low due to impeded proton conduction and oxygen transport [11,12].”
BackgroundEffect of Pt and Ionomer Distribution on Polymer Electrolyte Fuel Cell Performance and Durability
Kobayashi, A., Fujii, T., Harada, C., Yasumoto, E., Takeda, K., Kakinuma, K., & Uchida, M. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c02841 · Cited by 109
Self-citationKakinuma, K., Chino, Y., Senoo, Y., Uchida, M., Kamino, T., Uchida, H., Deki, S., & Watanabe, M. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.127 · Cited by 107
Self-citationNano-scale control of the ionomer distribution by molecular masking of the Pt surface in PEMFCs
Doo, G., Yuk, S., Lee, J. H., Choi, S., Lee, D.-H., Lee, D. W., Hyun, J., Kwon, S. H., Lee, S. G., & Kim, H.-T. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta14002f · Cited by 99
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Ishikawa, H., Sugawara, Y., Inoue, G., & Kawase, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.026 · Cited by 102
Woo, S., Lee, S., Taning, A. Z., Yang, T., Park, S., & Yim, S. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.03.006 · Cited by 97
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“However, for Pt/Ketjen, Ketjen carbon black is a porous carbon support and has a high surface area and abundant internal pore; only∼50% or even less than 50% of Pt nanoparticles reside on the external surface [87,88].”
BackgroundKoh, J. K., Jeon, Y., Cho, Y. I., Kim, J. H., & Shul, Y.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00674g · Cited by 83
Niu, X., Shi, L., Zhao, H., & Lan, M. (2016) · Analytical Methods · doi:10.1039/c5ay03181h · Cited by 80
Shimizu, R., Park, Y.-C., Kakinuma, K., Iiyama, A., & Uchida, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0071806jes · Cited by 79
Self-citationJeon, Y., Kim, D. J., Koh, J. K., Ji, Y., Kim, J. H., & Shul, Y.-G. (2015) · Scientific Reports · doi:10.1038/srep16394 · Cited by 70
Sakaushi, K., Kumeda, T., Hammes‐Schiffer, S., Melander, M., & Sugino, O. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp02741c · Cited by 68
Liu, S., Yuan, S., Liang, Y., Li, H., Xu, Z., Xu, Q., Yin, J., Shen, S., Yan, X., & Zhang, J. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.10.249 · Cited by 64
López‐Haro, M., Dubau, L., Guétaz, L., Bayle‐Guillemaud, P., Chatenet, M., André, J., Caqué, N., Rossinot, E., & Maillard, F. M. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.01.034 · Cited by 66
Jang, S., Kang, Y. S., Kim, D., Park, S. B., Seol, C., Lee, S.-C., Kim, S. M., & Yoo, S. J. (2022) · Advanced Materials · doi:10.1002/adma.202204902 · Cited by 77
Kakinuma, K., Suda, K., Kobayashi, R., Tano, T., Arata, C., Amemiya, I., Watanabe, S., Matsumoto, M., Imai, H., Iiyama, A., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11119 · Cited by 61
Self-citationUchida, M. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.019 · Cited by 57
Self-citationOxygen Reduction Reaction Activity and Durability of Pt Catalysts Supported on Titanium Carbide
Chiwata, M., Kakinuma, K., Wakisaka, M., Uchida, M., Deki, S., Watanabe, M., & Uchida, H. (2015) · Catalysts · doi:10.3390/catal5020966 · Cited by 57
“It has been reported that nearly half of the Pt particles for c-Pt/CB were located in the interiors of carbon black particles [40].”
BackgroundSelf-citationSharma, R., Wang, Y., Li, F., Chamier, J., & Andersen, S. M. (2019) · ACS Omega · doi:10.1021/acsomega.9b02351 · Cited by 49
Ma, M., Shen, L., Liu, J., Xu, B., Zhang, Y., Zhao, L., & Wang, Z. (2024) · Rare Metals · doi:10.1007/s12598-024-02698-6 · Cited by 53
Kobayashi, A., Fujii, T., Takeda, K., Tamoto, K., Kakinuma, K., & Uchida, M. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c02836 · Cited by 46
Self-citationEffects of Ionomer Carbon Ratio and Ionomer Dispersity on the Performance and Durability of MEAs
Lee, M. ‐., Lee, H. ‐., Yim, S. ‐., Kim, C. ‐., Shul, Y. ‐., Kucernak, A., & Shin, D. (2018) · Fuel Cells · doi:10.1002/fuce.201700178 · Cited by 44
Shin, S., Kim, A., & Um, S. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.04.138 · Cited by 44
Andersen, S. M., Dhiman, R., Larsen, M. J., & Skou, E. M. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.02.023 · Cited by 49
Hydrocarbon-based electrode ionomer for proton exchange membrane fuel cells
Chae, J. E., Yoo, S. J., Kim, J. Y., Jang, J. H., Lee, S. Y., Song, K. H., & Kim, H. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.03.003 · Cited by 42
Park, J.-H., Shin, M.-S., & Park, J. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138971 · Cited by 44
Effect of Added Graphitized CB on Both Performance and Durability of Pt/Nb-SnO2Cathodes for PEFCs
Chino, Y., Taniguchi, K., Senoo, Y., Kakinuma, K., Hara, M., Watanabe, M., & Uchida, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0651507jes · Cited by 39
Self-citationTakahashi, K., Kakinuma, K., & Uchida, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0611610jes · Cited by 34
Self-citationElectrochemical reduction of CO2 at CuAu nanoparticles: size and alloy effects
Andrews, E. M., Fang, Y., & Flake, J. C. (2018) · Journal of Applied Electrochemistry · doi:10.1007/s10800-018-1166-6 · Cited by 37
Samancı, M., & Yurtcan, A. B. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.04.124 · Cited by 35
Nagamori, K., Aoki, S., Ikegawa, M., Tamoto, K., Honda, Y., Seki, Y., Igarashi, H., & Uchida, M. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.3c01706 · Cited by 35
Self-citationImpact of anode catalyst loadings and carbon supports to CO contamination in PEM fuel cells
Papasavva, S., Veenstra, M., Waldecker, J. R., & West, T. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.03.204 · Cited by 32
Andersen, S. M., & Skou, E. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5028956 · Cited by 31
Ji, Y., Kwon, O., Jeon, O. S., Yim, S., Jeon, Y., & Shul, Y. (2023) · Science Advances · doi:10.1126/sciadv.adf4863 · Cited by 29
Takahashi, K., Koda, R., Kakinuma, K., & Uchida, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251704jes · Cited by 32
Self-citationKakinuma, K., Kobayashi, R., Iiyama, A., & Uchida, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0141815jes · Cited by 27
Self-citationChino, Y., Kakinuma, K., Tryk, D. A., Watanabe, M., & Uchida, M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0571602jes · Cited by 26
Self-citationLazaridis, T., Bella, R. K. F. D., & Gasteiger, H. A. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad5624 · Cited by 28
Electrode Architecture in Galvanic and Electrolytic Energy Cells
Jeong, B., Ocon, J. D., & Lee, J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201507780 · Cited by 25
Chi, W. S., Jeon, Y., Park, S. J., Kim, J. H., & Shul, Y. (2014) · ChemPlusChem · doi:10.1002/cplu.201402083 · Cited by 25
Galbiati, S., Morin, A., & Pauc, N. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.09.075 · Cited by 25
From single crystal model catalysts to systematic studies of supported nanoparticles
Speder, J., Spanos, I., Zana, A., Kirkensgaard, J. J. K., Mortensen, K., Altmann, L., Bäumer, M., & Arenz, M. (2015) · Surface Science · doi:10.1016/j.susc.2014.05.024 · Cited by 24
Sepp, S., Vaarmets, K., Nerut, J., Tallo, I., Tee, E., Kurig, H., Aruväli, J., Kanarbik, R., & Lust, E. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.158 · Cited by 31
Shen, L., Ma, M., Zhao, Z., Tu, F., Liu, J., Xu, B., Zhang, Y., Zhao, L., Shao, G., & Wang, Z. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233202 · Cited by 24
Zhou, Y., Yu, H., Xie, F., Zhao, Y., Sun, X., Yao, D., Jiang, G., Geng, J., & Shao, Z. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.11.057 · Cited by 24
Shintani, H., Kakinuma, K., Uchida, H., Watanabe, M., & Uchida, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.132 · Cited by 23
Self-citationKakinuma, K., Hayashi, M., Hashimoto, T., Iiyama, A., & Uchida, M. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00993 · Cited by 24
Self-citationKato, M., Iguchi, Y., Li, T., Kato, Y., Zhuang, Y., Higashi, K., Uruga, T., Saida, T., Miyabayashi, K., & Yagi, I. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c04597 · Cited by 21
Tomographic Analysis and Modeling of Polymer Electrolyte Fuel Cell Unsupported Catalyst Layers
Ishikawa, H., Henning, S., Herranz, J. S., Eychmüller, A., Uchida, M., & Schmidt, T. J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0371802jes · Cited by 20
Self-citationNagai, K., Osa, T., Inoue, G., Tsujiguchi, T., Araki, T., Kuroda, Y., Tomizawa, M., & Nagato, K. (2022) · Scientific Reports · doi:10.1038/s41598-022-05784-w · Cited by 23
Shin, S., Kim, A., & Um, S. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.178 · Cited by 20
Porous Carbon Supports for Low-Pt Proton-Exchange Membrane Fuel Cells
You, J., Hu, J., Zheng, Z., Li, H., Luo, L., Cheng, X., Yan, X., Shen, S., & Zhang, J. (2025) · Electrochemical Energy Reviews · doi:10.1007/s41918-025-00259-8 · Cited by 20
Ahmed, K., Salam, M. A., Shaikh, M. A. A., Murugaiah, D. K., Shahgaldi, S., & Sweety, M. N. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c01528 · Cited by 19
Jung, D., Balamurugan, J., Kim, N. H., Lee, S. H., Bhattacharyya, D., & Lee, J. H. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.052 · Cited by 18
Fernández, J. L., Imaduwage, K. P., & Zoski, C. G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.08.027 · Cited by 17
Jayawickrama, S. M., & Fujigaya, T. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228932 · Cited by 19
Zhang, Y., Li, J., Yang, W., Zhang, J., Fu, Q., Song, Y., Wei, Z., Liao, Q., & Zhu, X. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.137177 · Cited by 16
Shintani, H., Miyata, N., & Sugawara, Y. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229414 · Cited by 16
Wang, X., Li, D., Pan, Y.-T. F., Chen, K. S., Burns, K., Kim, Y. S., Wu, G., Watt, J. D., & Spendelow, J. S. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.145490 · Cited by 16
Takei, C., Kobayashi, R., Mizushita, Y., Hiramitsu, Y., Kakinuma, K., & Uchida, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0591816jes · Cited by 16
Self-citationMedina, S., Foster, J. G., Dzara, M. J., Wang, M., Ulsh, M., Mauger, S. A., & Pylypenko, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4265709 · Cited by 17
Zhang, Q., & Wang, B. (2023) · Transactions of Tianjin University · doi:10.1007/s12209-023-00371-0 · Cited by 16
“1) [21, 22].”
Hirai, T., Hommura, S., Watakabe, A., Miyajima, T., Nakayama, S., Tamoto, K., & Uchida, M. (2024) · ACS Applied Energy Materials · doi:10.1021/acsaem.4c00177 · Cited by 16
Self-citationAutonomous electrochemical biosensors: A new vision to direct methanol fuel cells
Sales, M. G. F., & Brandão, L. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2017.07.021 · Cited by 15
“However, metal catalyst utilization and the effectiveness factor of catalyst utilization (O'Hayre et al., 2005; Uchida et al., 2013) are not the aim of the present work.”
BackgroundKakinuma, K., Kawamoto, M., Tamoto, K., Yamaguchi, M., Honmura, S., Iiyama, A., & Uchida, M. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abfa59 · Cited by 15
Self-citationAkbar, A., & Um, S. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.05.112 · Cited by 14
Redox titration of gold and platinum surface oxides at porous microelectrodes
Haensch, M., Behnken, J., Balboa, L., Dyck, A., & Wittstock, G. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp04589a · Cited by 13
Watanabe, M., Yanai, H., & Nasu, M. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0231907jes · Cited by 13
Self-citationNagamori, K., Aoki, S., Ikegawa, M., Seki, Y., Igarashi, H., & Uchida, M. (2025) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c01411 · Cited by 14
Self-citationShin, S., Liu, J., Akbar, A., & Um, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227953 · Cited by 12
Shin, S., Kim, A.-R., & Um, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.04.013 · Cited by 13
Sepp, S., Vaarmets, K., Nerut, J., Tallo, I., Tee, E., Kurig, H., Aruväli, J., Kanarbik, R., & Lust, E. (2016) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-016-3448-4 · Cited by 14
Zou, G., Chen, W., Shen, J., Yang, T., & Chen, B. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.108806 · Cited by 12
Kariuki, N. N., Haug, A. T., Park, J. W., Lindell, M. J., & Myers, D. J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac94a4 · Cited by 11
Zhang, Y., Yuan, W., Hou, C., Li, Y., Liu, S., Deng, C., Ji, F., Zhang, Y., & Zhang, X. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.158756 · Cited by 9
Physicochemical Properties of ECS Supports and Pt/ECS Catalysts
Dzara, M. J., Godoy, A. O., Odgaard, M., Zulevi, B., Serov, A., Janković, J., & Pylypenko, S. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c01392 · Cited by 8
Cho, Y., Jeon, Y., & Shul, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.016 · Cited by 8
Elçiçek, H., & Ozdemir, Ö. K. (2022) · International Journal of Energy Research · doi:10.1002/er.8207 · Cited by 7
Review on electrochemical active surface area characterization methods of Pt alloy catalysts
Zhang, H., Zhou, F., & Pan, M. (2022) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2022-0795 · Cited by 8
Accelerated Durability Tests of Molybdenum Carbide Derived Carbon Based Pt Catalysts for PEMFC
Vaarmets, K., Nerut, J., Sepp, S., Kanarbik, R., & Lust, E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1021704jes · Cited by 9
A Review on the Oxygen Transport for High Performance PEMFCs at Low Pt Loadings
Zhang, Q., Zhang, R., Xie, Z., Song, X., Zheng, T., Feng, Y., Hu, X., Wang, J., & Ding, W. (2025) · ChemCatChem · doi:10.1002/cctc.202401942 · Cited by 7
Sulfonated polystyrene-co-acrylic acid membranes modified by transmembrane reduction of platinum
Melo, L., Benavides, R., Martínez, G., Morales‐Acosta, D., Paula, M. M. D. S., & da Silva, L. A. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.10.055 · Cited by 6
Metadata
- Authors
- Uchida, M., Park, Y.-C., Kakinuma, K., Yano, H., Tryk, D. A., Kamino, T., Uchida, H., & Watanabe, M.
- Affiliations
- University of Yamanashi (JP)
- Corresponding author
- Uchida, Makoto
- Watanabe, Masahiro
- ORCID
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 27
- Pages
- 11236
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W1998477874
- Cited by
- 122
- References
- 49
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 6 · 2023: 7 · 2022: 13 · 2021: 10 · 2020: 11 · 2019: 5 · 2018: 14 · 2017: 8 · 2016: 11 · 2015: 11 · 2014: 10 · 2013: 1
- FWCI
- 6.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Physical Chemistry Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (24350093)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Keywords
- platinum nanoparticles, proton exchange membrane fuel cells, platinum utilization, carbon black support, membrane electrode assembly, mass activity, graphitized carbon black, cathode catalysts, particle size distribution, 3D imaging
- MeSH terms
- Electrolytes, Particle Size, Platinum, Polymers, Electric Power Supplies, Surface Properties, Metal Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.