The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Improved lithium–sulfur batteries with a conductive coating on the separator to prevent the accumulation of inactive S-related species at the cathode–separator interface
Abstract
Lithium–sulfur (Li–S) batteries are highly attractive for future generations of portable electronics and electric vehicles due to their high energy density and potentially low cost. In the past decades, various novel electrodes and electrolytes have been tested to improve Li–S battery performance. However, these designs on electrodes and electrolytes have not fully addressed the problem of low cycling stability of Li–S batteries. Here, we show the role of the separator in the capacity decay of the Li–S battery, namely that it can accommodate a large amount of polysulfides inside which then precipitates as a thick layer of inactive S-related species. Using a thin conductive coating on the separator to prevent the formation of the inactive S-related species layer, we show that the specific capacity and cycling stability of the Li–S battery are both improved significantly compared to the battery with a pristine separator. Combining this separator design with a monodisperse sulfur nanoparticle cathode, we show Li–S batteries with a life of over 500 cycles with an initial specific capacity of 1350 mA h g−1 at C/2 and a cycle decay as low as 0.09% per cycle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Self-citationNanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Self-citationPorous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
A review on the separators of liquid electrolyte Li-ion batteries
Zhang, S. S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.065 · Cited by 1,671
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Self-citationSulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Deng, Z., Zhang, Z., Lai, Y., Liu, J., Li, J., & Liu, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.026304jes · Cited by 674
Li, W., Zhang, Q., Zheng, G., Seh, Z. W., Yao, H., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403130h · Cited by 654
Self-citationRechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571532 · Cited by 553
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571533 · Cited by 424
Investigations of lithium–sulfur batteries using electrochemical impedance spectroscopy
Cañas, N. A., Hirose, K., Pascucci, B., Wagner, N., Friedrich, K. A., & Hiesgen, R. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.02.101 · Cited by 415
Aqueous rechargeable lithium batteries as an energy storage system of superfast charging
Tang, W., Zhu, Y., Hou, Y., Liu, L., Wu, Y., Loh, K. P., Zhang, H., & Zhu, K. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24249h · Cited by 399
New insights into the limiting parameters of the Li/S rechargeable cell
Barchasz, C., Leprêtre, J., Alloin, F., & Patoux, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.021 · Cited by 398
Recent progress on flexible lithium rechargeable batteries
Gwon, H., Hong, J., Kim, H., Seo, D.-H., Jeon, S., & Kang, K. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42927j · Cited by 391
A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage
Yang, Y., Zheng, G., & Cui, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00072a · Cited by 390
Self-citationLi, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Self-citationElectrochemistry of a nonaqueous lithium/sulfur cell
Yamin, H., & Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87029-3 · Cited by 360
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Application of lithiated Nafion ionomer film as functional separator for lithium sulfur cells
Jin, Z., Xie, K., Hong, X., Hu, Z., & Liu, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.100 · Cited by 248
Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell
Choi, Y. J., Jung, B. S., Lee, D. J., Jeong, J. H., Kim, K. W., Ahn, H. J., Cho, K. K., & Gu, H. B. (2007) · Physica Scripta · doi:10.1088/0031-8949/2007/t129/014 · Cited by 195
Elazari, R., Salitra, G., Talyosef, Y., et al. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3479828 · Cited by 177
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Metadata
- Authors
- Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014-08-07
- Volume
- 7
- Issue
- 10
- Pages
- 3381-3390
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2154145425
- Cited by
- 526
- References
- 42
- FWCI
- 33.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.