The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Improved lithium–sulfur batteries with a conductive coating on the separator to prevent the accumulation of inactive S-related species at the cathode–separator interface
Abstract
Lithium–sulfur (Li–S) batteries are highly attractive for future generations of portable electronics and electric vehicles due to their high energy density and potentially low cost. In the past decades, various novel electrodes and electrolytes have been tested to improve Li–S battery performance. However, these designs on electrodes and electrolytes have not fully addressed the problem of low cycling stability of Li–S batteries. Here, we show the role of the separator in the capacity decay of the Li–S battery, namely that it can accommodate a large amount of polysulfides inside which then precipitates as a thick layer of inactive S-related species. Using a thin conductive coating on the separator to prevent the formation of the inactive S-related species layer, we show that the specific capacity and cycling stability of the Li–S battery are both improved significantly compared to the battery with a pristine separator. Combining this separator design with a monodisperse sulfur nanoparticle cathode, we show Li–S batteries with a life of over 500 cycles with an initial specific capacity of 1350 mA h g−1 at C/2 and a cycle decay as low as 0.09% per cycle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Self-citationNanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Self-citation
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationReview on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Self-citationHuang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
Hou, T.-Z., Chen, X., Peng, H.-J., Huang, J.-Q., Li, B.-Q., Zhang, Q., & Li, B. (2016) · Small · doi:10.1002/smll.201600809 · Cited by 789
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
Pie-like electrode design for high-energy density lithium–sulfur batteries
Li, Z., Zhang, J. T., Chen, Y. M., Li, J., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms9850 · Cited by 524
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
Self-citationPorous membranes in secondary battery technologies
Lu, W., Yuan, Z., Zhao, Y., Zhang, H., Zhang, H., & Li, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00823b · Cited by 479
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
Ye, C., Zhang, L., Guo, C., Li, D., Vasileff, A., Wang, H., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702524 · Cited by 407
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Self-citationPan, H., Chen, J., Cao, R., Murugesan, V., Rajput, N. N., Han, K. S., Persson, K., Estevez, L., Engelhard, M. H., Zhang, J.-G., et al. (2017) · Nature Energy · doi:10.1038/s41560-017-0005-z · Cited by 402
Self-citationCheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Nanoparticle/MOF composites: preparations and applications
Yu, J., Mu, C., Yan, B., Qin, X., Shen, C., Xue, H., & Pang, H. (2017) · Materials Horizons · doi:10.1039/c6mh00586a · Cited by 376
Kong, W., Yan, L., Luo, Y., Wang, D., Jiang, K., Li, Q., Fan, S., & Wang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606663 · Cited by 376
Nanomaterials: Science and applications in the lithium–sulfur battery
Ma, L., Hendrickson, K. E., Wei, S., & Archer, L. A. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.011 · Cited by 359
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Prospects and Limits of Energy Storage in Batteries
Abraham, K. M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5026273 · Cited by 348
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries
Zhang, L., Wang, Y., Niu, Z., & Chen, J. (2019) · Carbon · doi:10.1016/j.carbon.2018.09.067 · Cited by 343
Recent progress of separators in lithium-sulfur batteries
Li, C., Liu, R., Xiao, Y., Cao, F., & Zhang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.034 · Cited by 343
Cao, J., Chen, C., Zhao, Q., Zhang, N., Lu, Q., Wang, X., Niu, Z., & Chen, J. (2016) · Advanced Materials · doi:10.1002/adma.201602262 · Cited by 339
Understanding Conversion-Type Electrodes for Lithium Rechargeable Batteries
Yu, S.-H., Feng, X., Zhang, N., Seok, J., & Abruña, H. D. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00487 · Cited by 334
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Anode Improvement in Rechargeable Lithium–Sulfur Batteries
Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700542 · Cited by 304
Mechanistic understanding of the role separators playing in advanced lithium‐sulfur batteries
Wei, Z., Ren, Y., Sokolowski, J., Zhu, X., & Wu, G. (2020) · InfoMat · doi:10.1002/inf2.12097 · Cited by 302
Li, M., Wan, Y., Huang, J.-K., Assen, A. H., Hsiung, C.-E., Jiang, H., Han, Y., Eddaoudi, M., Lai, Z., Ming, J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00692 · Cited by 282
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Gu, X., Tong, C.-J., Lai, C., Qiu, J., Huang, X., Yang, W., Wen, B., Liu, L.-M., Hou, Y., & Zhang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04255k · Cited by 270
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Zhu, J., Chen, C., Lu, Y., Zang, J., Jiang, M., Kim, D., & Zhang, X. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.007 · Cited by 256
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Metadata
- Authors
- Yao, H., Yan, K., Li, W., Zheng, G., Kong, D., Seh, Z. W., Narasimhan, V. K., Liang, Z., & Cui, Y.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014-08-07
- Volume
- 7
- Issue
- 10
- Pages
- 3381-3390
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2154145425
- Cited by
- 526
- References
- 42
- FWCI
- 33.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.