The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Open accessAbstract
Vascularization remains a critical challenge in tissue engineering. The development of vascular networks within densely populated and metabolically functional tissues facilitate transport of nutrients and removal of waste products, thus preserving cellular viability over a long period of time. Despite tremendous progress in fabricating complex tissue constructs in the past few years, approaches for controlled vascularization within hydrogel based engineered tissue constructs have remained limited. Here, we report a three dimensional (3D) micromolding technique utilizing bioprinted agarose template fibers to fabricate microchannel networks with various architectural features within photocrosslinkable hydrogel constructs. Using the proposed approach, we were able to successfully embed functional and perfusable microchannels inside methacrylated gelatin (GelMA), star poly(ethylene glycol-co-lactide) acrylate (SPELA), poly(ethylene glycol) dimethacrylate (PEGDMA) and poly(ethylene glycol) diacrylate (PEGDA) hydrogels at different concentrations. In particular, GelMA hydrogels were used as a model to demonstrate the functionality of the fabricated vascular networks in improving mass transport, cellular viability and differentiation within the cell-laden tissue constructs. In addition, successful formation of endothelial monolayers within the fabricated channels was confirmed. Overall, our proposed strategy represents an effective technique for vascularization of hydrogel constructs with useful applications in tissue engineering and organs on a chip.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Microfabrication enables the use of biomaterials to 1) support long-lasting open EC lumens for perfusion; 2) define sophisticated capillary networks to mimic the hierarchy of native vasculature; 3) guide and support EC growth and maintain their cellular functions [259–263].”
From Cardiovascular disease models: A game changing paradigm in drug discovery and screening (2019) · cites this paper as [263]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Self-healing materials with microvascular networks
Toohey, K. S., Sottos, N. R., Lewis, J. A., Moore, J. S., & White, S. R. (2007) · Nature Materials · doi:10.1038/nmat1934 · Cited by 1,644
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Self-citationScaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F., Niklason, L. E., & Forgács, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,342
In vitro microvessels for the study of angiogenesis and thrombosis
Zheng, Y., Chen, J., Craven, M., Choi, N. W., Totorica, S., Diaz-Santana, A., Kermani, P., Hempstead, B., Fischbach-Teschl, C., López, J. A., et al. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201240109 · Cited by 894
Engineering of functional, perfusable 3D microvascular networks on a chip
Kim, S., Lee, H., Chung, M., & Jeon, N. L. (2013) · Lab on a Chip · doi:10.1039/c3lc41320a · Cited by 872
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Engineering vascularized tissue
Jain, R. K., Au, P., Tam, J., Duda, D. G., & Fukumura, D. (2005) · Nature Biotechnology · doi:10.1038/nbt0705-821 · Cited by 808
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 802
Self-citation
Research works printed but not linked: 3
- Bae, 2012, J. Tissue Eng. Regener. Med., 1
- Hansen, 2011, Adv. Funct. Mater., 1
- Jakab, 2006, Biorheology, 43, 509
Cited by
Sorted by citations
Items 601–700 of 943
Building Blood Vessel Chips with Enhanced Physiological Relevance
Mu, X., Gerhard‐Herman, M. D., & Zhang, Y. S. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201778 · Cited by 15
Volumetric bioprinting strategies for creating large-scale tissues and organs
Kim, D. S., Kang, D., Kim, D., & Jang, J. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00541-4 · Cited by 14
Multilayered microcasting of agarose–collagen composites for neurovascular modeling
Heidari, H., & Taylor, H. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00069 · Cited by 18
Bioinks for 3D printing of artificial extracellular matrices
Chopra, H., Kumar, S., & Singh, I. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818471-4.00001-7 · Cited by 14
Micro‐ and Macrobioprinting: Current Trends in Tissue Modeling and Organ Fabrication
Santoro, M., Navarro, J., & Fisher, J. P. (2018) · Small Methods · doi:10.1002/smtd.201700318 · Cited by 14
Liu, Y., Zhang, Y., Jiang, W., Peng, Y., Luo, J., Xie, S., Zhong, S., Pu, H., Liu, N., & Yue, T. (2019) · Micromachines · doi:10.3390/mi10040275 · Cited by 14
Solving Challenges in Microalgae-Based Living Materials
Kleiner, F. H., Oh, J., & Aubin‐Tam, M. (2025) · ACS Synthetic Biology · doi:10.1021/acssynbio.4c00683 · Cited by 14
Auricular reconstruction via 3D bioprinting strategies: An update
Dwivedi, R., Yadav, P. K., Pandey, R. K., & Mehrotra, D. (2022) · Journal of Oral Biology and Craniofacial Research · doi:10.1016/j.jobcr.2022.07.014 · Cited by 13
Zhu, L., Cheng, C., Liu, S., Yang, L., Han, P., Cui, T., & Zhang, Y. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1343177 · Cited by 15
Three dimensional (bio)printing of blood vessels: from vascularized tissues to functional arteries
Makode, S., Maurya, S., Niknam, S. A., Mollocana-Lara, E., Jaberi, K., Faramarzi, N., Tamayol, A., & Mortazavi, M. (2024) · Biofabrication · doi:10.1088/1758-5090/ad22ed · Cited by 13
Sacrificial strategy towards the formation of vascular‐like networks in volumetric tissue constructs
Buckley, C., Ibrahim, R., Giordano, F., Xu, N., Sems, B., & Wang, H. (2024) · BMEMat · doi:10.1002/bmm2.12118 · Cited by 13
3D bioprinting technology for modeling vascular diseases and its application
Kim, J.-E., Jeong, G., Yoo, Y. M., Bhang, S. H., Kim, J. H., Shin, Y. M., Yoo, K. H., Lee, B., Baek, W., Heo, D. N., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adc03a · Cited by 14
A strategy to engineer vascularized tissue constructs by optimizing and maintaining the geometry
Hsu, Y.-J., Wei, S., Lin, T.-Y., Fang, L., Hsieh, Y.-T., & Chen, Y. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.11.003 · Cited by 14
Microengineered Vascular Systems for Drug Development
Hovell, C. M., Sei, Y. J., & Kim, Y. (2014) · SLAS TECHNOLOGY · doi:10.1177/2211068214560767 · Cited by 13
Vascularization in 3D printed tissues: emerging technologies to overcome longstanding obstacles
Grover, H., Spatarelu, C.-P., De'De', K., Zhao, S., Yang, K., Zhang, Y. S., & Chen, Z. (2018) · AIMS Cell and Tissue Engineering · doi:10.3934/celltissue.2018.3.163 · Cited by 14
Hydrogels for targeted waveguiding and light diffusion
Johannsmeier, S., Torres‐Mapa, M. L., Dipresa, D., Ripken, T., Heinemann, D., & Heisterkamp, A. (2019) · Optical Materials Express · doi:10.1364/ome.9.003925 · Cited by 12
Garg, A., Fatease, A. M. A., Hani, U., Haider, N., Akbar, M. J., Talath, S., Angolkar, M., Paramshetti, S., Osmani, R. A. M., & Ravi, G. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131605 · Cited by 12
Progress in Biomaterials-Enhanced Vascularization by Modulating Physical Properties
Li, H., Li, D., Wang, X., Zeng, Z., Pahlavan, S., Zhang, W., Wang, X., & Wang, K. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01106 · Cited by 12
Biofabrication in Tissue Engineering
Bao, G. (2020) · Springer eBooks · doi:10.1007/978-3-030-34471-9_12 · Cited by 11
3D Bio-printing For Skin Tissue Regeneration: Hopes and Hurdles
Aavani, F., Biazar, E., Kheilnezhad, B., & Amjad, F. (2022) · Current Stem Cell Research & Therapy · doi:10.2174/1574888x17666220204144544 · Cited by 12
Interfacial Polyelectrolyte Complexation-Inspired Bioprinting of Vascular Constructs
Liu, C., & Tong, Y. W. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c01199 · Cited by 11
Biomaterials and Regenerative Medicine in Urology
Davis, N. F., Cunnane, E. M., Quinlan, M. R., Mulvihill, J. J., Lawrentschuk, N., Bolton, D. M., & Walsh, M. T. (2018) · Advances in experimental medicine and biology · doi:10.1007/5584_2017_139 · Cited by 12
Liu, S., Zhang, H., Li, S., Sun, C., & Hu, Q. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800642 · Cited by 12
Hydrogels with Cell Adhesion Peptide‐Decorated Channel Walls for Cell Guidance
Wang, S., Sarwat, M., Wang, P., Surrao, D. C., Harkin, D. G., John, J. A. S., Bolle, E. C. L., Forget, A., Dalton, P. D., & Dargaville, T. R. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.202000295 · Cited by 12
Additive‐Free Green Light‐Induced Ligation Using BODIPY Triggers
Li, M., Dove, A. P., & Truong, V. X. (2019) · Angewandte Chemie · doi:10.1002/ange.201912555 · Cited by 12
Emerging microfluidics for bioreactor
Chen, H., Fang, Y., Luo, Z., Wang, Y., Sun, W., & Zhao, Y. (2025) · Materials Today · doi:10.1016/j.mattod.2025.03.009 · Cited by 11
(Bio)fabrication of microfluidic devices and organs-on-a-chip
Hrynevich, A., Li, Y., Cedillo‐Servín, G., Malda, J., & Castilho, M. D. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00001-8 · Cited by 12
Luo, X., Pang, Z., Li, J., Anh, M., Kim, B. S., & Gao, G. (2024) · iScience · doi:10.1016/j.isci.2024.111215 · Cited by 12
Stimuli‐Responsive Polymers for Tubal Actuators
Chen, Q., & Wu, S. (2024) · Chemistry - A European Journal · doi:10.1002/chem.202403429 · Cited by 11
Advances and Challenges in Human 3D Solid Tumor Models
Natesh, N. R., & Varghese, S. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202419912 · Cited by 13
Culture of PC12 neuronal cells in GelMA hydrogel for brain tissue engineering
Rifai, N. A., Hasan, A., Kobeissy, F. H., Hasan, A., Rifai, N. A., Gazalah, H., & Charara, J. (2015) · International Conference on Advances in Biomedical Engineering (ICABME) · doi:10.1109/icabme.2015.7323300 · Cited by 11
Pence, J. C., Clancy, K. B. H., & Harley, B. A. C. (2017) · Advanced Biosystems · doi:10.1002/adbi.201700056 · Cited by 11
Charbe, N. B., Zacconi, F. C. M., Amnerkar, N. D., Pardhi, D. M., Shukla, P., Mukattash, T. L., McCarron, P. A., & Tambuwala, M. M. (2019) · Current Cardiology Reviews · doi:10.2174/1573403x15666190112154710 · Cited by 11
Mansoorifar, A., Tahayeri, A., & Bertassoni, L. E. (2020) · Lab on a Chip · doi:10.1039/d0lc00280a · Cited by 11
Self-citationBiomimetic microsystems for cardiovascular studies
Inbody, S. C., Sinquefield, B. E., Lewis, J. P., & Horton, R. E. (2021) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00026.2020 · Cited by 12
Emerging Trends in Biomaterials Research
Gaharwar, A. K., Detamore, M. S., & Khademhosseini, A. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1644-0 · Cited by 11
Self-citationIntegrating Hierarchical Vasculature into Engineered Cardiac Tissues
Zhuang, R. Z., Chesnais, F., & Vunjak‐Novakovic, G. (2025) · Advanced Materials · doi:10.1002/adma.202509242 · Cited by 10
Periosteum Organoid: Biomimetic Design Inspired From the Bone Healing Process
Hao, S., Wang, F., Huang, J., Xia, Z., Triffitt, J. T., Xu, C., Bai, L., & Su, J. (2025) · Exploration · doi:10.1002/exp.20240298 · Cited by 11
Fabricated soft materials for cell biology and tissue engineering applications: A review
Yang, X., Cao, H., & Li, X. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.108563 · Cited by 10
Recent advances of functional modules for tooth regeneration
Wang, X., Chen, Q., Li, J., Tian, W., Zhi, L., & Tian, C. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb01027b · Cited by 10
Guo, Y., Wusiman, H., Zhao, L., James-ocloo, O. S., Han, X., Miao, Y., Nie, J., Wang, L., Du, J., Wei, Y., et al. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112505 · Cited by 11
Moon, Y.-W., Dobroski, T., Willson, K., Jeong, J.-O., Bishop, C. E., Atala, A., Yoo, J. J., & Lee, S. J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101786 · Cited by 10
Li, S., Zhang, H.-G., Li, D., Wu, J.-P., Sun, C., & Hu, Q. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00355 · Cited by 10
Olguín, Y., Campos, C. H., Catalán, J., Velásquez, L., OSORIO, F. A., Montenegro, I., Madrid, A., & Acevedo, C. (2017) · Materials · doi:10.3390/ma10101122 · Cited by 10
Advances in Biomaterials for Promoting Vascularization
Nelson, R. A., Rhee, E. K., Alaeddine, M. H., & Nikkhah, M. (2022) · Current Stem Cell Reports · doi:10.1007/s40778-022-00217-w · Cited by 10
Self-citationAgrawal, R., Garg, A., & Deshmukh, R. (2023) · Current Pharmaceutical Design · doi:10.2174/1381612829666230228115442 · Cited by 10
Teng, F., Wang, W., Wang, Z., & Wang, G.-X. (2024) · Biofabrication · doi:10.1088/1758-5090/ad28f0 · Cited by 12
Buckley, C., Wang, H., O’Dell, R., Rosario, M. D., Ratnamani, M. P. C., Rome, M., & Wang, H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c00716 · Cited by 11
Temperature Tracking in a Three-Dimensional Matrix Using Thermosensitive Liposome Platform
Sou, K., Chan, L. Y., & Lee, C.-L. K. (2016) · ACS Sensors · doi:10.1021/acssensors.6b00222 · Cited by 10
3D Bioprinting for Cardiovascular Tissue Engineering
Kuss, M. A., & Duan, B. (2017) · Springer eBooks · doi:10.1007/978-3-319-53523-4_18 · Cited by 10
Biosynthetic Hydrogels for Cell Encapsulation
Lim, K. S., Martens, P. J., & Poole-Warren, L. A. (2018) · Springer series in biomaterials science and engineering · doi:10.1007/978-3-662-57511-6_1 · Cited by 10
Microchannels in nano-submicro-fibrous cellulose scaffolds favor cell ingrowth
Yang, Z., Fang, Y., Gan, D., Gama, M., Cui, T., Zhu, Y., Wan, Y., Deng, X., & Luo, H. (2021) · Cellulose · doi:10.1007/s10570-021-04094-0 · Cited by 10
Deng, J., Xie, Y., Shen, J., Gao, Q., He, J. Y., Ma, H., Ji, Y., He, Y., & Xiang, M. (2022) · Materials · doi:10.3390/ma15093322 · Cited by 10
Highley, C. B. (2019) · Springer eBooks · doi:10.1007/978-3-030-23906-0_1 · Cited by 11
Proteus Syndrome: a difficult diagnosis and management plan.
Popescu, M. D., Burnei, G., Drăghici, L., & Draghici, I. M. (2014) · Europe PMC (PubMed Central) · Cited by 10
Liu, E. I., Footner, E., Quigley, A. F., Baker, C., Foley, P. A., Pirogova, E., Kapsa, R. M. I., & O’Connell, C. D. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300042 · Cited by 9
Deshmukh, K., Mitra, K., & Bit, A. (2023) · Micromachines · doi:10.3390/mi14091661 · Cited by 10
Interfacial Dehydration Strategy for Chitosan Film Shape Morphing and Its Application
Liu, Z., Wang, Y., He, H., Zhang, C., Pan, N., & Wang, L. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c01324 · Cited by 9
Advances in 3D Bioprinting of Scaffolds for Dental Tissue Engineering and Regeneration
Chen, S., Sun, J., Wu, W., & Chen, Z. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202505258 · Cited by 9
Jafarkhani, M., Salehi, Z., Shokrgozar, M. A., & Mashayekhan, S. (2018) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.3154 · Cited by 9
Methacrylated Gelatin as an On-Demand Injectable Vehicle for Drug Delivery in Dentistry
Swanson, W. B., Mahmoud, A. H., Woodbury, S. M., & Bottino, M. C. (2022) · Methods in molecular biology · doi:10.1007/978-1-0716-2780-8_30 · Cited by 9
Tubular Microcapsules with Polysaccharide Membranes Based on a Co-axial Microfluidic Chip
Liu, Y., Yang, Y., & Shen, Y. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01077 · Cited by 9
Self-citationAccolla, R. P., Simmons, A., & Stabler, C. L. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200243 · Cited by 9
Vascular Tissue Engineering: The Role of 3D Bioprinting
Zhang, Y. S., & Khademhosseini, A. (2020) · Springer eBooks · doi:10.1007/978-3-030-05336-9_11 · Cited by 9
Self-citationCeramic scaffolds for biomaterials applications
Swain, S., Swain, P., Parida, S. K., & Rautray, T. R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99626-6.00016-0 · Cited by 10
Williams, S. K., & Hoying, J. B. (2015) · Stem cell biology and regenerative medicine · doi:10.1007/978-3-319-21386-6_1 · Cited by 9
Lung-on-a-chip platforms for modeling disease pathogenesis
Dellaquila, A., Thomée, E., McMillan, A. H., & Lesher‐Pérez, S. C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817202-5.00004-8 · Cited by 9
Kim, E., Takeuchi, M., Hasegawa, A., Ichikawa, A., Hasegawa, Y., Huang, Q., & Fukuda, T. (2019) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2019.2957494 · Cited by 9
Lee, M. C., Jodat, Y. A., Endo, Y., Rodríguez‐delaRosa, A., Zhang, T., Karvar, M., Tanoury, Z. A., Quint, J. P., Kamperman, T., Kiaee, K., et al. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2024.08.001 · Cited by 8
Biomaterials meet organ-on-chips – a perspective on tumor modeling
Monteiro, C. F., Deus, I. A., Custódio, C. A., & Mano, J. F. (2024) · International Materials Reviews · doi:10.1177/09506608241303436 · Cited by 9
Li, J., Isaakidou, A., van Zanten, L. J., Tas, R. P., Mirzaali, M. J., Fratila-Apachitei, L. E., & ZADPOOR, A. A. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.005 · Cited by 8
Jing, R., Pennisi, C. P., Nielsen, T. T., & Larsen, K. L. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143461 · Cited by 12
From 3D to 6D bioprinting: emerging additive manufacturing technologies for biomedical applications
Derhambakhsh, S., Salehi, N., Changizi, S., & Solati‐Hashjin, M. (2025) · Biomedical Materials · doi:10.1088/1748-605x/ae3043 · Cited by 8
My Liver Is Broken, Can You Print Me a New One?
Wolf, M. J., & Fresco, N. (2015) · Synthese Library/Synthese library · doi:10.1007/978-3-319-23291-1_17 · Cited by 8
Bedell, M. L., Guo, J. L., Xie, V. Y., Navara, A. M., & Mikos, A. G. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818422-6.00018-6 · Cited by 8
Three-dimensional bioprinting vascularized bone tissue
Gharacheh, H., & Güvendiren, M. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00547-y · Cited by 9
Chen, Y., Sun, W., Luo, P., Zhang, M., Wang, Y., Zhang, H., & Hu, P. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.11.162 · Cited by 8
Coupling fluid flow to hydrogel fluidic devices with reversible “pop-it” connections
Abbasi, R., LeFevre, T. B., Benjamin, A. D., Thornton, I., & Wilking, J. N. (2021) · Lab on a Chip · doi:10.1039/d1lc00135c · Cited by 8
Arguchinskaya, N. V., Beketov, E. E., Isaeva, E. V., Sergeeva, N. S., Шегай, П. В., Иванов, С. А., & Каприн, А. Д. (2021) · Russian Journal of Transplantology and Artificial Organs · doi:10.15825/1995-1191-2021-1-60-74 · Cited by 8
Hybprinting for musculoskeletal tissue engineering
Li, J., Kim, C., Pan, C., Babian, A., Lui, E., Young, J. L., Moeinzadeh, S., Kim, S., & Yang, Y. (2022) · iScience · doi:10.1016/j.isci.2022.104229 · Cited by 9
Self-citationFabrication of 3D PDMS Microchannels of Adjustable Cross-Sections via Versatile Gel Templates
Ng, P. F., Lee, K. I., Yang, M., & Fei, B. (2019) · Polymers · doi:10.3390/polym11010064 · Cited by 8
Karan, P., Chakraborty, J., Chakraborty, S. K., Wereley, S. T., & Christov, I. C. (2021) · Physical review. E · doi:10.1103/physreve.104.015108 · Cited by 8
"ORGAN-ON-A-CHIP" — MATERIALS AND METHODS OF CREATION (REVIEW)
Afonicheva, P. K., Леонидович, Б. А., & Evstrapov, A. A. (2019) · NAUCHNOE PRIBOROSTROENIE · doi:10.18358/np-29-4-i318 · Cited by 8
Torras, N., Zabalo, J., Abril, E., Carré, A., García-Díaz, M., & Martínez, E. (2022) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2022.02.09.479715 · Cited by 8
Lab-on-a-chip models of cardiac inflammation
Popovic, A. M., Lei, M. H. C., Shakeri, A., Khosravi, R., & Radisic, M. (2024) · Biomicrofluidics · doi:10.1063/5.0231735 · Cited by 7
Challenges and Innovative Strategies in 3D Printing of Natural Biomolecular Hydrogels
Qiu, J., Ma, S., & Qu, X. (2025) · Nano Select · doi:10.1002/nano.202400149 · Cited by 8
Applications and prospects of indirect 3D printing technology in bone tissue engineering
Qiao, M., Wu, W., Tang, W. X., Zhao, Y.-F., Wang, J., Pei, X., Zhang, B., & Wan, Q. (2024) · Biomaterials Science · doi:10.1039/d4bm01374c · Cited by 7
March, A., Hebner, T. S., Choe, R., & Benoit, D. S. W. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214187 · Cited by 7
Bioinks for Three-Dimensional Printing in Regenerative Medicine
Navarro, J., Calderon, G. A., Miller, J. S., & Fisher, J. P. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809880-6.00046-1 · Cited by 7
Bioprinting technologies: an overview
Bonatti, A. F., Fortunato, G. M., Maria, C. D., & Vozzi, G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85430-6.00006-6 · Cited by 8
Tissue Engineering: New Tools for Old Problems
Pirraco, R. P., & Reis, R. L. (2015) · Stem Cell Reviews and Reports · doi:10.1007/s12015-015-9593-9 · Cited by 7
Vascularized Liver Tissue Embedded Bioprinting Utilizing GelMA/Nanoclay-based Composite hydrogelsPreprint
Rezaei, N. T., Dixit, K., Kumar, H., John, J., Natale, G., Park, S. S., & Kim, K. (2023) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2023.11.16.567470 · Cited by 7
Engineering vascularized organotypic tissues via module assembly
Zhou, Z., Liu, C., Guo, Y., Pang, Y., & Sun, W. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acfcf2 · Cited by 8
Mechanical properties of biopolymer gels: a review
Malektaj, H., Drozdov, A. D., & Christiansen, J. D. C. (2025) · Polymer International · doi:10.1002/pi.70048 · Cited by 6
In Situ 3D Bioprinting: Impact of Cross‐Linking on the Adhesive Properties of Hydrogels
Fernandez, O. R., Asim, M. H., Arshad, S., Kali, G., & Bernkop‐Schnürch, A. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202530372 · Cited by 6
Bhardwaj, N., Dey, S., Bhar, B., & Mandal, B. B. (2023) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ad10b4 · Cited by 9
Recent advances in additive manufacturing for tooth restorations
Liu, Y., Liang, L., Rajan, S. S., Damade, Y., Zhang, X., Mishra, K., Liu, Q., & Dubey, N. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102275 · Cited by 6
3D functional scaffolds for cartilage tissue engineering
Lee, K.-X. A., Ng, H. Y., Wei, L.-J., & Shen, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100979-6.00016-1 · Cited by 8
Organ-on-Chip Devices Toward Applications in Drug Development and Screening
Uhl, C. G., Shi, W., & Liu, Y. (2018) · Journal of Medical Devices · doi:10.1115/1.4040272 · Cited by 6
Davis, N. F., & Callanan, A. (2021) · Advances in experimental medicine and biology · doi:10.1007/978-3-030-82735-9_10 · Cited by 6
Metadata
- Authors
- Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Politecnico di Torino (IT)
- Stanford Medicine (US)
- Corresponding author
- Khademhosseini, Ali
- ORCID
- Venue
- Lab Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 14
- Issue
- 13
- Pages
- 2202-2211
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- PMC
- PMC4201051
- OpenAlex
- W2129322399
- Cited by
- 944
- References
- 50
- Citations by year
- 2026: 34 · 2025: 53 · 2024: 63 · 2023: 78 · 2022: 55 · 2021: 102 · 2020: 96 · 2019: 129 · 2018: 104 · 2017: 87 · 2016: 76 · 2015: 50 · 2014: 16
- FWCI
- 39.64
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Lab on a Chip (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- PORTO@Iris (submittedVersion)
- PORTO Publications Open Repository TOrino (Politecnico di Torino) (submittedVersion)
- Funders
- National Institutes of Health
- Defense Threat Reduction Agency
- Australian Research Council
- National Heart, Lung, and Blood Institute (HL-099073, R01HL099073)
- National Institute of General Medical Sciences (R01GM095906, GM095906)
- National Institute of Allergy and Infectious Diseases (R01AI081534, AI081534)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR057837, R01AR057837)
- National Institute of Biomedical Imaging and Bioengineering (EB02597)
- National Institute of Dental and Craniofacial Research (DE021468, R01DE021468)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- microchannel networks, vascularization, gelatin methacryloyl, poly(ethylene glycol) diacrylate, poly(ethylene glycol) dimethacrylate, endothelial monolayer, mass transfer, cell viability, cell differentiation, organ-on-a-chip
- MeSH terms
- Animals, Blood Vessel Prosthesis, Cell Line, Osteoblasts, Polyethylene Glycols, Sepharose, Hydrogels, Tissue Engineering, Mice
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
