The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Open accessAbstract
Vascularization remains a critical challenge in tissue engineering. The development of vascular networks within densely populated and metabolically functional tissues facilitate transport of nutrients and removal of waste products, thus preserving cellular viability over a long period of time. Despite tremendous progress in fabricating complex tissue constructs in the past few years, approaches for controlled vascularization within hydrogel based engineered tissue constructs have remained limited. Here, we report a three dimensional (3D) micromolding technique utilizing bioprinted agarose template fibers to fabricate microchannel networks with various architectural features within photocrosslinkable hydrogel constructs. Using the proposed approach, we were able to successfully embed functional and perfusable microchannels inside methacrylated gelatin (GelMA), star poly(ethylene glycol-co-lactide) acrylate (SPELA), poly(ethylene glycol) dimethacrylate (PEGDMA) and poly(ethylene glycol) diacrylate (PEGDA) hydrogels at different concentrations. In particular, GelMA hydrogels were used as a model to demonstrate the functionality of the fabricated vascular networks in improving mass transport, cellular viability and differentiation within the cell-laden tissue constructs. In addition, successful formation of endothelial monolayers within the fabricated channels was confirmed. Overall, our proposed strategy represents an effective technique for vascularization of hydrogel constructs with useful applications in tissue engineering and organs on a chip.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Microfabrication enables the use of biomaterials to 1) support long-lasting open EC lumens for perfusion; 2) define sophisticated capillary networks to mimic the hierarchy of native vasculature; 3) guide and support EC growth and maintain their cellular functions [259–263].”
From Cardiovascular disease models: A game changing paradigm in drug discovery and screening (2019) · cites this paper as [263]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Self-healing materials with microvascular networks
Toohey, K. S., Sottos, N. R., Lewis, J. A., Moore, J. S., & White, S. R. (2007) · Nature Materials · doi:10.1038/nmat1934 · Cited by 1,644
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
Self-citationScaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F., Niklason, L. E., & Forgács, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,342
In vitro microvessels for the study of angiogenesis and thrombosis
Zheng, Y., Chen, J., Craven, M., Choi, N. W., Totorica, S., Diaz-Santana, A., Kermani, P., Hempstead, B., Fischbach-Teschl, C., López, J. A., et al. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201240109 · Cited by 894
Engineering of functional, perfusable 3D microvascular networks on a chip
Kim, S., Lee, H., Chung, M., & Jeon, N. L. (2013) · Lab on a Chip · doi:10.1039/c3lc41320a · Cited by 872
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Engineering vascularized tissue
Jain, R. K., Au, P., Tam, J., Duda, D. G., & Fukumura, D. (2005) · Nature Biotechnology · doi:10.1038/nbt0705-821 · Cited by 808
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 802
Self-citation
Flagged first, then by citations
Research works printed but not linked: 3
- Bae, 2012, J. Tissue Eng. Regener. Med., 1
- Hansen, 2011, Adv. Funct. Mater., 1
- Jakab, 2006, Biorheology, 43, 509
Cited by
Sorted by citations
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
“The sacrificial agarose segments could be eas ily removed from the GelMA matrix by simply pulling of the agarose cords, resulting in a bioprinted GelMA scaffold with internal hollow “vessels” [63].”
BackgroundMethodInfluentialSelf-citationAdvances in engineering hydrogels
Zhang, Y. S., & Khademhosseini, A. (2017) · Science · doi:10.1126/science.aaf3627 · Cited by 2,908
Self-citation3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,818
Emerging Droplet Microfluidics
Shang, L., Cheng, Y., & Zhao, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00848 · Cited by 1,606
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,642
Scaffolds for bone tissue engineering: state of the art and new perspectives
Roseti, L., Parisi, V., Petretta, M., Cavallo, C., Desando, G., Bartolotti, I., & Grigolo, B. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.017 · Cited by 1,320
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell’Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 979
Self-citationMedical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Self-citationLoessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Self-citationA comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. T. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 892
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 880
Blaeser, A., Campos, D. F. D., Puster, U., Richtering, W. H., Stevens, M. M., & Fischer, H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 821
A decade of progress in tissue engineering
Khademhosseini, A., & Langer, R. (2016) · Nature Protocols · doi:10.1038/nprot.2016.123 · Cited by 766
Self-citation3D printed microfluidics for biological applications
Ho, C. M. B., Ng, S. H., Li, K. H. H., & Yoon, Y. (2015) · Lab on a Chip · doi:10.1039/c5lc00685f · Cited by 728
3D Bioprinting for Tissue and Organ Fabrication
Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh‐Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 716
Self-citationAdvanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 708
Vascularization and Angiogenesis in Tissue Engineering: Beyond Creating Static Networks
Rouwkema, J., & Khademhosseini, A. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.002 · Cited by 651
Self-citationWang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Recent advances in bioprinting techniques: approaches, applications and future prospects
Li, J., Chen, M., Fan, X., & Zhou, H. (2016) · Journal of Translational Medicine · doi:10.1186/s12967-016-1028-0 · Cited by 633
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., Coppi, P. D., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 584
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W. Z., Qu, X., Zhu, J., Ma, X., Patel, S. H., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 590
Unagolla, J. M., & Jayasuriya, A. C. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 567
Vedadghavami, A., Minooei, F., Mohammadi, M. H., Khetani, S., Kolahchi, A. R., Mashayekhan, S., & Sanati‐Nezhad, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.028 · Cited by 565
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 545
Self-citationExtrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W. H., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 523
Self-citationBiomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2014) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 476
Vascular Tissue Engineering: Progress, Challenges, and Clinical Promise
Song, H.-H. G., Rumma, R. T., Ozaki, C. K., Edelman, E. R., & Chen, C. S. (2018) · Cell Stem Cell · doi:10.1016/j.stem.2018.02.009 · Cited by 476
Sun, M., Sun, X., Wang, Z., Guo, S., Yu, G., & Yang, H. (2018) · Polymers · doi:10.3390/polym10111290 · Cited by 453
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W. H., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 455
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Ma, X., Liu, J., Zhu, W. Z., Tang, M., Lawrence, N., Yu, C., Gou, M., & Chen, S. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.06.011 · Cited by 417
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N. A., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 426
Self-citationBioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Santiago, G. T., Álvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 403
Self-citationZhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lütolf, M. P., McAlpine, M. C., Yeong, W. Y., Zenobi‐Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 428
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 392
Self-citationNavaei, A., Saini, H., Christenson, W., Sullivan, R., Ros, R., & Nikkhah, M. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.05.027 · Cited by 395
Self-citationInterplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T., Álvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 389
Self-citationBio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 391
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Lindberg, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 364
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Advances in Hydrogels in Organoids and Organs‐on‐a‐Chip
Liu, H., Wang, Y., Cui, K., Guo, Y., Zhang, X., & Qin, J. (2019) · Advanced Materials · doi:10.1002/adma.201902042 · Cited by 361
Application areas of 3D bioprinting
Ozbolat, I. T., Peng, W., & Özbolat, V. (2016) · Drug Discovery Today · doi:10.1016/j.drudis.2016.04.006 · Cited by 364
Bioprinting scale-up tissue and organ constructs for transplantation
Ozbolat, I. T. (2015) · Trends in biotechnology · doi:10.1016/j.tibtech.2015.04.005 · Cited by 357
Engineering an in vitro air-blood barrier by 3D bioprinting
Horváth, L., Umehara, Y., Jud, C., Blank, F., Petri‐Fink, A., & Rothen‐Rutishauser, B. (2015) · Scientific Reports · doi:10.1038/srep07974 · Cited by 349
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero‐Espinosa, S., Baker, M. B., Wieringa, P. A., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 359
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Daly, A. C., Freeman, F. E., Gonzalez‐Fernandez, T., Critchley, S. E., Nulty, J. M., & Kelly, D. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700298 · Cited by 351
Gelatin-Based Hydrogels for Organ 3D Bioprinting
Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., & Bai, S. (2017) · Polymers · doi:10.3390/polym9090401 · Cited by 317
State-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering
Duan, B. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1607-5 · Cited by 323
Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review
He, Y., Wu, Y. L., Fu, J., Gao, Q., & Qiu, J. (2016) · Electroanalysis · doi:10.1002/elan.201600043 · Cited by 327
3D bioprinting for skin tissue engineering: Current status and perspectives
Weng, T., Zhang, W., Xia, Y., Wu, P., Yang, M., Jin, R., Xia, S., Wang, J., You, C., Han, C., et al. (2021) · Journal of Tissue Engineering · doi:10.1177/20417314211028574 · Cited by 321
Engineering Smart Composite Hydrogels for Wearable Disease Monitoring
Li, J., Ding, Q., Wang, H., Wu, Z., Gui, X., Li, C., Hu, N., Tao, K., & Wu, J. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01079-5 · Cited by 317
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala‐Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 297
Engineering Organoid Vascularization
Grebenyuk, S., & Ranga, A. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00039 · Cited by 295
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 307
Functional Biomaterials for Bone Regeneration: A Lesson in Complex Biology
Armiento, A. R., Hatt, L. P., Rosenberg, G. S., Thompson, K., & Stoddart, M. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909874 · Cited by 282
3D neural tissue models: From spheroids to bioprinting
Zhuang, P., Sun, A. X., An, J., Chua, C. K., & Chew, S. Y. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.10.002 · Cited by 269
Wang, Z., Kumar, H., Tian, Z., Jin, X., Holzman, J. F., Ménard, F., & Kim, K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06607 · Cited by 271
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00643 · Cited by 275
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Çeçen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 277
Self-citationDevelopment of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Lee, J. W., Choi, Y., Yong, W.-J., Pati, F., Shim, J., Kang, K. S., Kang, I.-H., Park, J., & Cho, D. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015007 · Cited by 257
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 254
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Review of 3D printable hydrogels and constructs
Li, H., Tan, C., & Li, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.023 · Cited by 253
Bioprinting the Cancer Microenvironment
Zhang, Y. S., Duchamp, M., Öklü, R., Ellisen, L. W., Langer, R., & Khademhosseini, A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00246 · Cited by 254
Self-citationOrgans-on-a-Chip Module: A Review from the Development and Applications Perspective
Sosa‐Hernández, J. E., Villalba‐Rodríguez, A. M., Romero‐Castillo, K. D., Aguilar-Aguila-Isaías, M. A., García-Reyes, I. E., Hernández‐Antonio, A., Ahmed, I., Sharma, A. K., Parra‐Saldívar, R., & Iqbal, H. M. N. (2018) · Micromachines · doi:10.3390/mi9100536 · Cited by 256
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J. P., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 250
Extrusion bioprinting: Recent progress, challenges, and future opportunities
Ramesh, S., Harrysson, O. L. A., Rao, P., Tamayol, A., Cormier, D., Zhang, Y., & Rivero, I. V. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00116 · Cited by 255
Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering
Obregon, F., Vaquette, C., Ivanovski, S., Hutmacher, D. W., & Bertassoni, L. E. (2015) · Journal of Dental Research · doi:10.1177/0022034515588885 · Cited by 249
Self-citationComplex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 246
3D Bioprinting for Vascularized Tissue Fabrication
Richards, D., Jia, J., Yost, M. J., Markwald, R. R., & Mei, Y. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1653-z · Cited by 245
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 236
Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
Dzobo, K., Motaung, K. S., & Adesida, A. B. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20184628 · Cited by 243
Monteiro, N., Thrivikraman, G., Athirasala, A., Tahayeri, A., França, C. M., Ferracane, J. L., & Bertassoni, L. E. (2017) · Dental Materials · doi:10.1016/j.dental.2017.11.020 · Cited by 228
Self-citationBioprinted thrombosis-on-a-chip
Zhang, Y. S., Davoudi, F., Walch, P., Manbachi, A., Luo, X., Dell'Erba, V., Miri, A. K., Albadawi, H., Arneri, A., Li, X., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00380j · Cited by 227
Self-citationXu, M., Girish, Y. R., Rakesh, K. P., Wu, P., Manukumar, H. M. G., Byrappa, S. M., Udayabhanu, & Byrappa, K. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102533 · Cited by 224
Cardiovascular disease models: A game changing paradigm in drug discovery and screening
Savoji, H., Mohammadi, M. H., Rafatian, N., Toroghi, M. K., Wang, E. Y., Zhao, Y., Korolj, A., Ahadian, S., & Radisic, M. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.09.036 · Cited by 223
Natural Biomaterials and Their Use as Bioinks for Printing Tissues
Benwood, C., Chrenek, J., Kirsch, R. L., Masri, N. Z., Richards, H., Teetzen, K., & Willerth, S. M. (2021) · Bioengineering · doi:10.3390/bioengineering8020027 · Cited by 235
Current Strategies for the Manufacture of Small Size Tissue Engineering Vascular Grafts
Carrabba, M., & Madeddu, P. R. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00041 · Cited by 233
Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Święszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 228
Self-citationTextile Technologies and Tissue Engineering: A Path Toward Organ Weaving
Akbari, M., Tamayol, A., Bagherifard, S., Serex, L., Mostafalu, P., Faramarzi, N., Mohammadi, M. H., & Khademhosseini, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500517 · Cited by 215
Self-citationApplication of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems
Ota, H., Emaminejad, S., Gao, Y., Zhao, A., Wu, E. G., Challa, S., Chen, K., Fahad, H. M., Jha, A. K., Kiriya, D., et al. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600013 · Cited by 213
Three-dimensional bioprinting of gelatin methacryloyl (GelMA)
Ying, G., Jiang, N., Yu, C., & Zhang, Y. S. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0028-8 · Cited by 215
AI-enabled organoids: Construction, analysis, and application
Bai, L., Wu, Y., Li, G., Zhang, W., Zhang, H., & Su, J. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.09.005 · Cited by 225
The current state of scaffolds for musculoskeletal regenerative applications
Smith, B. D., & Grande, D. A. (2015) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2015.27 · Cited by 207
Advances in Carbon Nanotubes–Hydrogel Hybrids in Nanomedicine for Therapeutics
Vashist, A., Kaushik, A. K., Vashist, A., Sagar, V., Ghosal, A., Gupta, Y. K., Ahmad, S., & Nair, M. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701213 · Cited by 207
Advancing the field of 3D biomaterial printing
Jakus, A. E., Rutz, A. L., & Shah, R. N. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014102 · Cited by 207
Evaluation of bioprinter technologies
Ozbolat, I. T., Moncal, K. K., & Gudapati, H. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.10.003 · Cited by 206
3D Bioprinting in Tissue Engineering for Medical Applications: The Classic and the Hybrid
Xie, Z., Gao, M. X., Lobo, A. O., & Webster, T. J. (2020) · Polymers · doi:10.3390/polym12081717 · Cited by 217
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis
Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 202
Materials and technical innovations in 3D printing in biomedical applications
Tetsuka, H., & Shin, S. R. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00034e · Cited by 203
Ophthalmic gels: Past, present and future
Al-Kinani, A. A., Zidan, G., Elsaid, N., Seyfoddin, A., Alani, A. W. G., & Alany, R. G. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.12.017 · Cited by 200
3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs
Zhang, B., Gao, L., Ma, L., Luo, Y., Yang, H., & Cui, Z. (2019) · Engineering · doi:10.1016/j.eng.2019.03.009 · Cited by 201
Spatially and temporally controlled hydrogels for tissue engineering
Leijten, J., Seo, J., Yue, K., Santiago, G. T., Tamayol, A., Ruiz‐Esparza, G. U., Shin, S. R., Sharifi, R., Noshadi, I., Álvarez, M. M., et al. (2017) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2017.07.001 · Cited by 197
Self-citationAdvances in the Biofabrication of 3D Skin in vitro: Healthy and Pathological Models
Randall, M. J., Jüngel, A., Rimann, M., & Wuertz‐Kozak, K. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00154 · Cited by 202
Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks
Cidonio, G., Alcala‐Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 192
Directly coaxial 3D bioprinting of large-scale vascularized tissue constructs
Shao, L., Gao, Q., Xie, C., Fu, J., Xiang, M., & He, Y. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7e76 · Cited by 195
Metadata
- Authors
- Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- Politecnico di Torino (IT)
- Stanford Medicine (US)
- Corresponding author
- Khademhosseini, Ali
- ORCID
- Venue
- Lab Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 14
- Issue
- 13
- Pages
- 2202-2211
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- PMC
- PMC4201051
- OpenAlex
- W2129322399
- Cited by
- 944
- References
- 50
- Citations by year
- 2026: 34 · 2025: 53 · 2024: 63 · 2023: 78 · 2022: 55 · 2021: 102 · 2020: 96 · 2019: 129 · 2018: 104 · 2017: 87 · 2016: 76 · 2015: 50 · 2014: 16
- FWCI
- 39.64
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Lab on a Chip (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- PORTO@Iris (submittedVersion)
- PORTO Publications Open Repository TOrino (Politecnico di Torino) (submittedVersion)
- Funders
- National Institutes of Health
- Defense Threat Reduction Agency
- Australian Research Council
- National Heart, Lung, and Blood Institute (HL-099073, R01HL099073)
- National Institute of General Medical Sciences (R01GM095906, GM095906)
- National Institute of Allergy and Infectious Diseases (R01AI081534, AI081534)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR057837, R01AR057837)
- National Institute of Biomedical Imaging and Bioengineering (EB02597)
- National Institute of Dental and Craniofacial Research (DE021468, R01DE021468)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- microchannel networks, vascularization, gelatin methacryloyl, poly(ethylene glycol) diacrylate, poly(ethylene glycol) dimethacrylate, endothelial monolayer, mass transfer, cell viability, cell differentiation, organ-on-a-chip
- MeSH terms
- Animals, Blood Vessel Prosthesis, Cell Line, Osteoblasts, Polyethylene Glycols, Sepharose, Hydrogels, Tissue Engineering, Mice
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
