The DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index.
Inorganic nanomaterials for printed electronics: a review
Abstract
Owing to their capability of bypassing conventional high-priced and inflexible silicon based electronics to manufacture a variety of devices on flexible substrates by using large-scale and high-volume printing techniques, printed electronics (PE) have attracted increasing attention in the field of manufacturing industry for electronic devices. This simple and cost-effective approach could enhance current methods of constructing a patterned surface for nanomaterials and offer opportunities for developing fully-printed functional devices, especially offering the possibility of ubiquitous low-cost and flexible devices. This review presents a summary of work to date on the inorganic nanomaterials involved in PE applications, focused on the utilization of inorganic nanomaterials-based inks in the successful preparation of printed conductive patterns, electrodes, sensors, thin film transistors (TFTs) and other micro-/nanoscale devices. The printing techniques, sintering methods and printability of functional inks with their associated challenges are discussed, and we look forward so you can glimpse the future of PE applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Carbon Nanotubes: Present and Future Commercial Applications
De Volder, M. F. L., Tawfick, S. H., Baughman, R. H., & Hart, A. J. (2013) · Science · doi:10.1126/science.1222453 · Cited by 5,587
Control of valley polarization in monolayer MoS2 by optical helicity
Mak, K. F., He, K., Shan, J., & Heinz, T. F. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.96 · Cited by 4,034
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Self-citationFabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
On Maxwell's displacement current for energy and sensors: the origin of nanogenerators
Wang, Z. L. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.001 · Cited by 2,083
Flexible Nanogenerators for Energy Harvesting and Self‐Powered Electronics
Fan, F. R., Tang, W., & Wang, Z. L. (2016) · Advanced Materials · doi:10.1002/adma.201504299 · Cited by 1,918
Wang, Z. L. (2014) · Faraday Discuss. · doi:10.1039/c4fd00159a · Cited by 1,749
Inkjet printing of single-crystal films
Minemawari, H., Yamada, T., Matsui, H., Tsutsumi, J., Haas, S., Chiba, R., Kumai, R., & Hasegawa, T. (2011) · Nature · doi:10.1038/nature10313 · Cited by 1,707
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Oghbaei, M., & Mirzaee, O. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.01.068 · Cited by 1,270
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Self-citationRecent Advances in Flexible and Stretchable Bio‐Electronic Devices Integrated with Nanomaterials
Choi, S., Lee, H., Ghaffari, R., Hyeon, T., & Kim, D. (2016) · Advanced Materials · doi:10.1002/adma.201504150 · Cited by 1,104
Graphene-based wireless bacteria detection on tooth enamel
Mannoor, M. S., Tao, H., Clayton, J. D., Sengupta, A., Kaplan, D. L., Naik, R. R., Verma, N., Omenetto, F. G., & McAlpine, M. C. (2012) · Nature Communications · doi:10.1038/ncomms1767 · Cited by 1,014
Recent Progress in Electronic Skin
Wang, X., Dong, L., Zhang, H., Yu, R., Pan, C., & Wang, Z. L. (2015) · Advanced Science · doi:10.1002/advs.201500169 · Cited by 976
A wearable thermoelectric generator fabricated on a glass fabric
Kim, S. J., We, J. H., & Cho, B. J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00242c · Cited by 949
All‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide
Dua, V., Surwade, S. P., Ammu, S., Agnihotra, S. R., Jain, S., Roberts, K. E., Park, S., Ruoff, R. S., & Manohar, S. K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905089 · Cited by 932
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Full sintering of powdered-metal bodies in a microwave field
Roy, R., Agrawal, D., Cheng, J., & Gedevanishvili, S. (1999) · Nature · doi:10.1038/21390 · Cited by 867
Multifunctional Epidermal Electronics Printed Directly Onto the Skin
Yeo, W., Kim, Y., Lee, J., Ameen, A., Shi, L., Li, M., Wang, S., Ma, R., Jin, S. H., Kang, Z., et al. (2013) · Advanced Materials · doi:10.1002/adma.201204426 · Cited by 828
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Flexible and Stretchable Electronics for Biointegrated Devices
Kim, D.-H., Ghaffari, R., Lu, N., & Rogers, J. A. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150018 · Cited by 749
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Nanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices
Yao, S., & Zhu, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404446 · Cited by 695
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Liu, H., Dong, M., Huang, W., Gao, J., Dai, K., Guo, J., Zheng, G., Liu, C., Shen, C., & Guo, Z. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc03713e · Cited by 664
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Liu, H., Li, Y., Dai, K., Zheng, G., Liu, C., Shen, C., Yan, X., Guo, J., & Guo, Z. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc02751a · Cited by 573
Liu, H., Gao, J., Huang, W., Dai, K., Zheng, G., Liu, C., Shen, C., Yan, X., Guo, J., & Guo, Z. (2016) · Nanoscale · doi:10.1039/c6nr02216b · Cited by 567
Recent developments and applications of screen-printed electrodes in environmental assays—A review
Li, M., Li, Y.-T., Li, D.-W., & Long, Y.-T. (2012) · Analytica Chimica Acta · doi:10.1016/j.aca.2012.05.018 · Cited by 550
Downscaling of self-aligned, all-printed polymer thin-film transistors
Noh, Y.-Y., Zhao, N., Caironi, M., & Sirringhaus, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.365 · Cited by 549
Screen-printed electrodes for biosensing: a review (2008–2013)
Taleat, Z., Khoshroo, A., & Mazloum-Ardakani, M. (2014) · Microchimica Acta · doi:10.1007/s00604-014-1181-1 · Cited by 542
Jeong, S., Woo, K., Kim, D., Lim, S., Kim, J. S., Shin, H., Xia, Y., & Moon, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700902 · Cited by 529
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Solar cells with one-day energy payback for the factories of the future
Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02728j · Cited by 496
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
Walker, S. B., & Lewis, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209267c · Cited by 459
Huang, L., Huang, Y., Liang, J., Wan, X., & Chen, Y. (2011) · Nano Research · doi:10.1007/s12274-011-0123-z · Cited by 458
All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
Jung, M., Kim, J., Noh, J., Lim, N., Lim, C., Lee, G., Kim, J., Kang, H., Jung, K., Leonard, A. D., et al. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2039541 · Cited by 452
Shape control of inorganic nanoparticles from solution
Wu, Z., Yang, S., & Wu, W. (2016) · Nanoscale · doi:10.1039/c5nr07681a · Cited by 452
Self-citationAll-inkjet-printed, solid-state flexible supercapacitors on paper
Choi, K.-H., Yoo, J., Lee, C. K., & Lee, S.-Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00966b · Cited by 449
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Hong, S., Yeo, J., Kim, G., Kim, D., Lee, H., Kwon, J., Lee, H., Lee, P., & Ko, S. H. (2013) · ACS Nano · doi:10.1021/nn400432z · Cited by 427
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Sekitani, T., Noguchi, Y., Zschieschang, U., Klauk, H., & Someya, T. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0708340105 · Cited by 424
Printing Highly Efficient Organic Solar Cells
Hoth, C. N., Schilinsky, P., Choulis, S. A., & Brabec, C. J. (2008) · Nano Letters · doi:10.1021/nl801365k · Cited by 414
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Lau, P. H., Takei, K., Wang, C., Ju, Y., Kim, J., Yu, Z., Takahashi, T., Cho, G., & Javey, A. (2013) · Nano Letters · doi:10.1021/nl401934a · Cited by 410
Fukuda, K., Takeda, Y., Yoshimura, Y., Shiwaku, R., Tran, L. T., Sekine, T., Mizukami, M., Kumaki, D., & Tokito, S. (2014) · Nature Communications · doi:10.1038/ncomms5147 · Cited by 403
Ohta, S., Komagata, S., Seki, J., Saeki, T., Morishita, S., & Asaoka, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.073 · Cited by 399
Handbook of print media: technologies and production methods
(2002) · Choice Reviews Online · doi:10.5860/choice.39-3175 · Cited by 355
Harada, S., Kanao, K., Yamamoto, Y., Arie, T., Akita, S., & Takei, K. (2014) · ACS Nano · doi:10.1021/nn506293y · Cited by 350
Abellán-Llobregat, A., Jeerapan, I., Bandodkar, A., Vidal, L., Canals, A., Wang, J., & Morallón, E. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2017.01.058 · Cited by 348
Schmidt, T. M., Larsen‐Olsen, T. T., Carlé, J. E., Angmo, D., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500569 · Cited by 336
Conductive Inks with a “Built-In” Mechanism That Enables Sintering at Room Temperature
Grouchko, M., Kamyshny, A., Mihailescu, C. F., Anghel, D. F., & Magdassi, S. (2011) · ACS Nano · doi:10.1021/nn2005848 · Cited by 331
Inkjet Printing of Highly Loaded Particulate Suspensions
Derby, B., & Reis, N. (2003) · MRS Bulletin · doi:10.1557/mrs2003.230 · Cited by 327
Harada, S., Honda, W., Arie, T., Akita, S., & Takei, K. (2014) · ACS Nano · doi:10.1021/nn500845a · Cited by 322
Sekitani, T., Takamiya, M., Noguchi, Y., Nakano, S., Kato, Y., Sakurai, T., & Someya, T. (2007) · Nature Materials · doi:10.1038/nmat1903 · Cited by 306
Chen, J. ‐., Ishigami, M., Jang, C., Hines, D. R., Fuhrer, M. S., & Williams, E. D. (2007) · Advanced Materials · doi:10.1002/adma.200701059 · Cited by 296
Jang, J., Ha, J., & Cho, J. (2007) · Advanced Materials · doi:10.1002/adma.200602127 · Cited by 296
Inkjet deposition of liquid-exfoliated graphene and MoS2nanosheets for printed device applications
Finn, D. J., Lotya, M., Cunningham, G., Smith, R. J., McCloskey, D., Donegan, J. F., & Coleman, J. N. (2014) · J. Mater. Chem. C · doi:10.1039/c3tc31993h · Cited by 292
Hu, Y., & Sun, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00716f · Cited by 279
Inkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
Wang, X., Yang, B., Liu, J., Zhu, Y., Yang, C., & He, Q. (2016) · Scientific Reports · doi:10.1038/srep36409 · Cited by 271
Kumar, R., Shin, J., Yin, L., You, J., Meng, Y. S., & Wang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602096 · Cited by 261
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Li, J., Naiini, M. M., Vaziri, S., Lemme, M. C., & Östling, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400984 · Cited by 256
Conductor microstructures by laser curing of printed gold nanoparticle ink
Chung, J., Ko, S., Bieri, N. R., Grigoropoulos, C. P., & Poulikakos, D. (2004) · Applied Physics Letters · doi:10.1063/1.1644907 · Cited by 252
Screen‐Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks
Xu, Y., Schwab, M. G., Strudwick, A. J., Hennig, I., Feng, X., Wu, Z., & Müllen, K. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300184 · Cited by 250
Highly Flexible, Printed Alkaline Batteries Based on Mesh‐Embedded Electrodes
Gaikwad, A. M., Whiting, G. L., Steingart, D. A., & Arias, A. C. (2011) · Advanced Materials · doi:10.1002/adma.201100894 · Cited by 248
Paper-based batteries: A review
Nguyen, T. H., Fraiwan, A., & Choi, S. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.11.007 · Cited by 240
Zheng, Y., He, Z.-Z., Yang, J., & Liu, J. (2014) · Scientific Reports · doi:10.1038/srep04588 · Cited by 229
Cao, X., Lau, C., Liu, Y., Wu, F., Gui, H., Liu, Q., Ma, Y., Wan, H., Amer, M. R., & Zhou, C. (2016) · ACS Nano · doi:10.1021/acsnano.6b05368 · Cited by 228
Recent advances in upscalable wet methods and ink formulations for printed electronics
Aleeva, Y., & Pignataro, B. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00618f · Cited by 225
Large Area Electronics Using Printing Methods
Parashkov, R., Becker, E., Riedl, T., Johannes, H.-H., & Kowalsky, W. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.850304 · Cited by 224
Cao, X., Chen, H., Gu, X., Liu, B., Wang, W., Cao, Y., Wu, F., & Zhou, C. (2014) · ACS Nano · doi:10.1021/nn505979j · Cited by 217
A High Areal Capacity Flexible Lithium‐Ion Battery with a Strain‐Compliant Design
Gaikwad, A. M., Khau, B. V., Davies, G., Hertzberg, B., Steingart, D. A., & Arias, A. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401389 · Cited by 211
Kim, S.-H., Choi, K.-H., Cho, S.-J., Choi, S., Park, S., & Lee, S.-Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01394 · Cited by 209
Ahmad, R., Vaseem, M., Tripathy, N., & Hahn, Y.-B. (2013) · Analytical Chemistry · doi:10.1021/ac402925r · Cited by 206
Inkjet printed chemical sensor array based on polythiophene conductive polymers
Li, B., Santhanam, S., Schultz, L., Jeffries‐EL, M., Iovu, M. C., Sauvé, G., Cooper, J. R., Zhang, R., Revelli, J. C., Kusne, A. G., et al. (2006) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2006.09.064 · Cited by 200
Chen, P., Fu, Y., Aminirad, R., Wang, C., Zhang, J., Wang, K., Galatsis, K., & Zhou, C. (2011) · Nano Letters · doi:10.1021/nl202765b · Cited by 197
Hu, L., Wu, H., & Cui, Y. (2010) · Applied Physics Letters · doi:10.1063/1.3425767 · Cited by 196
Synthesis of silver nano particles and fabrication of aqueous Ag inks for inkjet printing
Kosmala, A., Wright, R., Zhang, Q., & Kirby, P. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.064 · Cited by 196
Jeong, S., Song, H. C., Lee, W. W., Lee, S. S., Choi, Y., Son, W., Kim, E. D., Paik, C. H., Oh, S. H., & Ryu, B.-H. (2011) · Langmuir · doi:10.1021/la104136w · Cited by 193
Multi-LeapMotion sensor based demonstration for robotic refine tabletop object manipulation task
Jin, H., Chen, Q., Chen, Z., Hu, Y., & Zhang, J. (2016) · CAAI Transactions on Intelligence Technology · doi:10.1016/j.trit.2016.03.010 · Cited by 192
Gaikwad, A. M., Arias, A. C., & Steingart, D. A. (2015) · Energy Technology · doi:10.1002/ente.201402182 · Cited by 189
Rehman, M. M., Siddiqui, G. U., Gul, J. Z., Kim, S.-W., Lim, J. H., & Choi, K. H. (2016) · Scientific Reports · doi:10.1038/srep36195 · Cited by 171
Niittynen, J., Sowade, E., Kang, H., Baumann, R. R., & Mäntysalo, M. (2015) · Scientific Reports · doi:10.1038/srep08832 · Cited by 170
Laser sintering of copper nanoparticles
Zenou, M., Ermak, O., Saar, A., & Kotler, Z. (2014) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/47/2/025501 · Cited by 169
A flexible high potential printed battery for powering printed electronics
Gaikwad, A. M., Steingart, D. A., Nga Ng, T., Schwartz, D. E., & Whiting, G. L. (2013) · Applied Physics Letters · doi:10.1063/1.4810974 · Cited by 167
Paper-based, printed zinc–air battery
Hilder, M., Winther-Jensen, B., & Clark, N. B. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.054 · Cited by 167
Singh, N., Galande, C., Miranda, A., Mathkar, A., Gao, W., Reddy, A. L. M., Vlad, A., & Ajayan, P. M. (2012) · Scientific Reports · doi:10.1038/srep00481 · Cited by 167
Controlled insulator-to-metal transformation in printable polymer composites with nanometal clusters
Sivaramakrishnan, S., Chia, P.-J., Yeo, Y.-C., Chua, L.-L., & Ho, P. K.-H. (2007) · Nature Materials · doi:10.1038/nmat1806 · Cited by 165
All‐Solution‐Processed Flexible Thin Film Piezoelectric Nanogenerator
Chung, S. Y., Kim, S., Lee, J., Kim, K., Kim, S., Kang, C., Yoon, S., & Kim, Y. S. (2012) · Advanced Materials · doi:10.1002/adma.201202708 · Cited by 163
Scalability of Roll-to-Roll Gravure-Printed Electrodes on Plastic Foils
Noh, J., Yeom, D., Lim, C., Cha, H., Han, J., Kim, J., Park, Y., Subramanian, V., & Cho, G. (2010) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2010.2057512 · Cited by 162
Shi, S., Xu, C., Yang, C., Chen, Y., Liu, J., & Kang, F. (2013) · Scientific Reports · doi:10.1038/srep02598 · Cited by 161
Graphene and the related conductive inks for flexible electronics
Yang, W., & Wang, C. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc01625a · Cited by 161
Wu, W. H., Liu, L., Dai, Z., Liu, J., Yang, S., Zhou, L., Xiao, X., Jiang, C., & Roy, V. A. L. (2015) · Scientific Reports · doi:10.1038/srep10208 · Cited by 160
Self-citationLien, D., Kao, Z.-K., Huang, T.-H., Liao, Y., Lee, S., & He, J. (2014) · ACS Nano · doi:10.1021/nn501231z · Cited by 158
Tang, X., Yang, Z., & Wang, W. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.02.011 · Cited by 156
Yeo, J., Kim, G., Hong, S., Kim, M. S., Kim, D., Lee, J., Lee, H., Kwon, J., Suh, Y. D., Kang, H. W., et al. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.012 · Cited by 155
Jeong, S., Lee, S. H., Jo, Y., Lee, S. S., Seo, Y.-H., Ahn, B. W., Kim, G., Jang, G.-E., Park, J., Ryu, B.-H., et al. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc00904a · Cited by 154
All-printed strain sensors: Building blocks of the aircraft structural health monitoring system
Zhang, Y., Anderson, N., Bland, S. M., et al. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.10.007 · Cited by 151
An epidermal alkaline rechargeable Ag–Zn printable tattoo battery for wearable electronics
Berchmans, S., Bandodkar, A. J., Jia, W., Ramírez, J., Meng, Y. S., & Wang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03256j · Cited by 149
Dhakar, L., Gudla, S., Shan, X., Wang, Z., Tay, F. E. H., Heng, C.-H., & Lee, C. (2016) · Scientific Reports · doi:10.1038/srep22253 · Cited by 148
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Secor, E. B., & Hersam, M. C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502431r · Cited by 142
Homenick, C. M., James, R., Lopinski, G. P., Dunford, J. L., Sun, J., Park, H., Jung, Y., Cho, G., & Malenfant, P. R. L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06838 · Cited by 142
Advances and Future Challenges in Printed Batteries
Sousa, R., Costa, C. M., & Lanceros-Méndez, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500657 · Cited by 140
High-Speed, Inkjet-Printed Carbon Nanotube/Zinc Tin Oxide Hybrid Complementary Ring Oscillators
Kim, B.-J., Jang, S., Geier, M. L., Prabhumirashi, P. L., Hersam, M. C., & Dodabalapur, A. (2014) · Nano Letters · doi:10.1021/nl5016014 · Cited by 139
Fully inkjet printed SnO2 gas sensor on plastic substrate
Rieu, M., Camara, M., Tournier, G., Viricelle, J.-P., Pijolat, C., de Rooij, N. F., & Briand, D. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.06.042 · Cited by 133
Das, S. R., Nian, Q., Cargill, A. A., Hondred, J. A., Ding, S., Saei, M., Cheng, G. J., & Claussen, J. C. (2016) · Nanoscale · doi:10.1039/c6nr04310k · Cited by 128
Solution-processed transparent electrodes
Hecht, D. S., & Kaner, R. B. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.211 · Cited by 114
Highly reliable wind-rolling triboelectric nanogenerator operating in a wide wind speed range
Yong, H., Chung, J., Choi, D., Jung, D., Cho, M., & Lee, S. (2016) · Scientific Reports · doi:10.1038/srep33977 · Cited by 114
A review on amperometric-type immunosensors based on screen-printed electrodes
Mistry, K. K., Layek, K., Mahapatra, A., Roychaudhuri, C., & Saha, H. (2014) · The Analyst · doi:10.1039/c3an02050a · Cited by 111
Characterization and optimization of a printed, primary silver–zinc battery
Braam, K., Volkman, S. K., & Subramanian, V. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.076 · Cited by 111
Fully Printed Ultraflexible Supercapacitor Supported by a Single-Textile Substrate
Zhang, H., Qiao, Y., & Lu, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11172 · Cited by 110
Combinatorial Screening of Polymer:Fullerene Blends for Organic Solar Cells by Inkjet Printing
Teichler, A., Eckardt, R., Hoeppener, S., Friebe, C., Perelaer, J., Senes, A., Morana, M., Brabec, C. J., & Schubert, U. S. (2010) · Advanced Energy Materials · doi:10.1002/aenm.201000027 · Cited by 108
Inkjet-Printed Flexible Graphene-Based Supercapacitor
Ervin, M. H., Le, L. T. M., & Lee, W. Y. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.10.006 · Cited by 107
Pabst, O., Perelaer, J., Beckert, E., Schubert, U. S., Eberhardt, R., & Tünnermann, A. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.09.009 · Cited by 107
High Yield, Single Droplet Electrode Arrays for Nanoscale Printed Electronics
Caironi, M., Gili, E., Sakanoue, T., Cheng, X., & Sirringhaus, H. (2010) · ACS Nano · doi:10.1021/nn9014664 · Cited by 104
Gören, A., Mendes, J., Rodrigues, H. M. R., Sousa, R., de Oliveira, J. A. S., Hilliou, L. H. G., Costa, C. M., Silva, M. M. P., & Lanceros-Méndez, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.019 · Cited by 103
Hösel, M., Søndergaard, R. R., Jørgensen, M., & Krebs, F. C. (2013) · Advanced Engineering Materials · doi:10.1002/adem.201300172 · Cited by 101
Single‐Crystal Organic Nanowire Electronics by Direct Printing from Molecular Solutions
Park, K. S., Cho, B., Baek, J., Hwang, J. K., Lee, H., & Sung, M. M. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203540 · Cited by 101
Recent advances in printed sensors on foil
Mattana, G., & Briand, D. (2015) · Materials Today · doi:10.1016/j.mattod.2015.08.001 · Cited by 99
Park, H., Kang, H., Lee, Y., Park, Y.-S., Noh, J., & Cho, G. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/34/344006 · Cited by 81
Xu, W., Liu, Z., Zhao, J., Xu, W., Gu, W., Zhang, X., Long, Q., & Cui, Z. (2014) · Nanoscale · doi:10.1039/c4nr05471g · Cited by 81
Environmentally friendly synthesis of organic-soluble silver nanoparticles for printed electronics
Lee, K. J., Jun, B. H., Choi, J.-R., Lee, Y. I., Joung, J., & Oh, Y. S. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/33/335601 · Cited by 77
High performance dye-sensitized solar cells with inkjet printed ionic liquid electrolyte
Hashmi, S. G., Özkan, M., Halme, J., Dimić‐Mišić, K., Zakeeruddin, S. M., Paltakari, J., Grätzel, M., & Lund, P. D. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.019 · Cited by 76
Zhang, W., Bi, E., Li, M., & Gao, L. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.11.014 · Cited by 76
All-solid-state micro-supercapacitors based on inkjet printed graphene electrodes
Li, J., Mishukova, V., & Östling, M. (2016) · Applied Physics Letters · doi:10.1063/1.4962728 · Cited by 76
Inkjet-printed highly conductive transparent patterns with water based Ag-doped graphene
Li, L., Guo, Y., Zhang, X., & Song, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04156a · Cited by 71
Koo, H., Lee, W., Choi, Y., Sun, J., Bak, J., Noh, J., Subramanian, V., Azuma, Y., Majima, Y., & Cho, G. (2015) · Scientific Reports · doi:10.1038/srep14459 · Cited by 67
Deganello, D., Cherry, J. A., Gethin, D. T., & Claypole, T. C. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.08.050 · Cited by 64
Disposable, Paper-Based, Inkjet-Printed Humidity and H2S Gas Sensor for Passive Sensing Applications
Quddious, A., Yang, S., Khan, M., Tahir, F. A., Shamim, A., Salama, K. N., & Cheema, H. M. (2016) · Sensors · doi:10.3390/s16122073 · Cited by 64
Anto, B. T., Sivaramakrishnan, S., Chua, L., & Ho, P. K. H. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901336 · Cited by 60
Fukuda, K., Hikichi, K., Sekine, T., Takeda, Y., Minamiki, T., Kumaki, D., & Tokito, S. (2013) · Scientific Reports · doi:10.1038/srep02048 · Cited by 59
Annealed graphene sheets decorated with silver nanoparticles for inkjet printing
Wang, G., Wang, Z., Liu, Z., Xue, J., Xin, G., Yu, Q., Lian, J., & Chen, M. Y. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.037 · Cited by 58
Song, J., Kulinich, S. A., Li, J., Liu, Y., & Zeng, H. (2014) · Angewandte Chemie · doi:10.1002/ange.201408621 · Cited by 58
Cai, L., Zhang, S., Miao, J., Yu, Z., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502367 · Cited by 56
Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
Hamad, E. M., Bilatto, S., Adly, N., Correa, D. S., Wolfrum, B. L., Schöning, M. J., Offenhäusser, A., & Yakushenko, A. (2015) · Lab on a Chip · doi:10.1039/c5lc01195g · Cited by 54
Zhao, J., Gao, Y., Gu, W., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34598f · Cited by 49
Fully Gravure-Printed Flexible Full Adder Using SWNT-Based TFTs
Noh, J., Jung, K., Kim, J., Kim, S., Cho, S., & Cho, G. (2012) · IEEE Electron Device Letters · doi:10.1109/led.2012.2214757 · Cited by 47
Rowley‐Neale, S. J., Foster, C. W., Smith, G. C., Brownson, D. A. C., & Banks, C. E. (2017) · Sustainable Energy & Fuels · doi:10.1039/c6se00115g · Cited by 46
Ding, Y., Duan, Y., & Huang, Y. (2015) · Energy Technology · doi:10.1002/ente.201402148 · Cited by 43
All-printed and transparent single walled carbon nanotube thin film transistor devices
Sajed, F., & Rutherglen, C. (2013) · Applied Physics Letters · doi:10.1063/1.4824475 · Cited by 40
A novel method to produce Pd nanoparticle ink for ink-jet printing technology
Tseng, C., Chang, C.-P., Sung, Y., Chen, Y.-C., & Ger, M.-D. (2009) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2009.02.026 · Cited by 40
Entirely solution-processed write-once-read-many-times memory devices and their operation mechanism
Wang, J., Cheng, X., Caironi, M., Gao, F., Yang, X., & Greenham, N. C. (2011) · Organic Electronics · doi:10.1016/j.orgel.2011.04.010 · Cited by 28
Electrohydrodynamic printing for scalable MoS 2 flake coating: application to gas sensing device
Lim, S., Cho, B., Bae, J., Kim, A. R., Lee, K. H., Kim, S. H., Hahm, M. G., & Nam, J. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/43/435501 · Cited by 28
Yang, X., He, W., Wang, S., et al. (2012) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-012-0691-z · Cited by 25
Liu, J., Yang, C., Zou, P., Yang, R. X., Xu, C., Xie, B., Lin, Z., Kang, F., & Wong, C. P. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01421b · Cited by 21
Printed Piezoelectric Energy Harvesting Device
Ali, M., Prakash, D., Zillger, T., Singh, P. K., & Hübler, A. C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300427 · Cited by 20
Flexible Fibrous Piezoelectric Sensors on Printed Silver Electrodes
Son, H. Y., Park, J. S., Huang, J., Kim, J., Nam, Y. S., & Kim, W. S. (2014) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2014.2316536 · Cited by 15
Roll-printed wrinkled electrode for use in a triboelectric generator
Hong, D., Jeong, J., & Choi, Y. (2015) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/25/8/085017 · Cited by 4
High Performance ITO Nanoparticles as Nanoink for Printing as a Substitute Process of Sputtering
Muramatsu, A., Kanie, K., Sasaki, T., & Nakaya, M. (2014) · MRS Proceedings · doi:10.1557/opl.2014.693 · Cited by 3
Cited by
Dong, K., Peng, X., & Wang, Z. L. (2020) · Advanced Materials · doi:10.1002/adma.201902549 · Cited by 1,322
Wongkaew, N., Simsek, M., Griesche, C., & Baeumner, A. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00172 · Cited by 657
Multifunctional Skin‐Inspired Flexible Sensor Systems for Wearable Electronics
Xu, K., Lu, Y., & Takei, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800628 · Cited by 602
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Metadata
- Authors
- Wu, W.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2017
- Volume
- 9
- Issue
- 22
- Pages
- 7342-7372
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2615549432
- Cited by
- 522
- References
- 163
- FWCI
- 23.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.