The DOI matches its Crossref record; 163 of the 163 references it cites were found in a registry or an index.
Inkjet printing wearable electronic devices
Abstract
In this review, the recent advances in inks, strategies, and the applications of inkjet-printed wearable electronics have been summarized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Electronic structure of chiral graphene tubules
Saito, R., Fujita, M., Dresselhaus, G., & Dresselhaus, M. S. (1992) · Applied Physics Letters · doi:10.1063/1.107080 · Cited by 2,801
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Reynolds, O. (1883) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1883.0029 · Cited by 2,262
Sorting carbon nanotubes by electronic structure using density differentiation
Arnold, M. S., Green, A. A., Hulvat, J. F., Stupp, S. I., & Hersam, M. C. (2006) · Nature Nanotechnology · doi:10.1038/nnano.2006.52 · Cited by 2,251
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
Wearable Electronics and Smart Textiles: A Critical Review
Stoppa, M., & Chiolerio, A. (2014) · Sensors · doi:10.3390/s140711957 · Cited by 2,107
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
Zeng, W., Shu, L., Li, Q., Chen, S., Wang, F., & Tao, X. (2014) · Advanced Materials · doi:10.1002/adma.201400633 · Cited by 2,019
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
Sekitani, T., Nakajima, H., Maeda, H., Fukushima, T., Aida, T., Hata, K., & Someya, T. (2009) · Nature Materials · doi:10.1038/nmat2459 · Cited by 1,767
Marangoni Effect Reverses Coffee-Ring Depositions
Hu, H., & Larson, R. G. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0609232 · Cited by 1,645
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Yunker, P. J., Still, T., Lohr, M. A., & Yodh, A. G. (2011) · Nature · doi:10.1038/nature10344 · Cited by 1,618
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Organic Semiconductors for Solution‐Processable Field‐Effect Transistors (OFETs)
Allard, S., Forster, M., Souharce, B., Thiem, H., & Scherf, U. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200701920 · Cited by 1,210
Grapheneviasonication assisted liquid-phase exfoliation
Ciesielski, A., & Samorì, P. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60217f · Cited by 1,207
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
n‐Type Organic Semiconductors in Organic Electronics
Anthony, J. E., Facchetti, A., Heeney, M., Marder, S. R., & Zhan, X. (2010) · Advanced Materials · doi:10.1002/adma.200903628 · Cited by 1,181
Vosgueritchian, M., Lipomi, D. J., & Bao, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101775 · Cited by 1,174
Fractal design concepts for stretchable electronics
Fan, J. A., Yeo, W.-H., Su, Y., Hattori, Y., Lee, W., Jung, S.-Y., Zhang, Y., Liu, Z., Cheng, H., Falgout, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms4266 · Cited by 1,088
High-Concentration, Surfactant-Stabilized Graphene Dispersions
Lotya, M., King, P. J., Khan, U., De, S., & Coleman, J. N. (2010) · ACS Nano · doi:10.1021/nn1005304 · Cited by 1,015
Zhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Advanced Materials · doi:10.1002/adma.201305371 · Cited by 999
Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect
Soltman, D., & Subramanian, V. (2008) · Langmuir · doi:10.1021/la7026847 · Cited by 994
Recent Progress in Electronic Skin
Wang, X., Dong, L., Zhang, H., Yu, R., Pan, C., & Wang, Z. L. (2015) · Advanced Science · doi:10.1002/advs.201500169 · Cited by 976
Elastomeric polymer light-emitting devices and displays
Liang, J., Li, L., Niu, X., Yu, Z., & Pei, Q. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.242 · Cited by 973
Self-citationAll‐Organic Vapor Sensor Using Inkjet‐Printed Reduced Graphene Oxide
Dua, V., Surwade, S. P., Ammu, S., Agnihotra, S. R., Jain, S., Roberts, K. E., Park, S., Ruoff, R. S., & Manohar, S. K. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200905089 · Cited by 932
Park, M., Im, J., Shin, M., Min, Y., Park, J., Cho, H., Park, S., Shim, M.-B., Jeon, S., Chung, D.-Y., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.206 · Cited by 919
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Large-scale single-chirality separation of single-wall carbon nanotubes by simple gel chromatography
Liu, H., Nishide, D., Tanaka, T., & Kataura, H. (2011) · Nature Communications · doi:10.1038/ncomms1313 · Cited by 908
Inorganic Semiconductors for Flexible Electronics
Sun, Y., & Rogers, J. A. (2007) · Advanced Materials · doi:10.1002/adma.200602223 · Cited by 874
High-k Organic, Inorganic, and Hybrid Dielectrics for Low-Voltage Organic Field-Effect Transistors
Ortiz, R. P., Facchetti, A., & Marks, T. J. (2010) · Chemical Reviews · doi:10.1021/cr9001275 · Cited by 871
Highly Sensitive Skin‐Mountable Strain Gauges Based Entirely on Elastomers
Lu, N., Lu, C., Yang, S., & Rogers, J. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200498 · Cited by 825
Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes–Ecoflex nanocomposites
Amjadi, M., Yoon, Y. J., & Park, I. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/37/375501 · Cited by 817
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Pen‐on‐Paper Flexible Electronics
Russo, A., Ahn, B. Y., Adams, J. J., Duoss, E. B., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201101328 · Cited by 696
Nanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices
Yao, S., & Zhu, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404446 · Cited by 695
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 693
Experimental Studies on Anisotropic Thermoelectric Properties and Structures of n-Type Bi2Te2.7Se0.3
Yan, X., Poudel, B., Ma, Y., Liu, W. S., Joshi, G., Wang, H., Lan, Y., Wang, D., Chen, G., & Ren, Z. F. (2010) · Nano Letters · doi:10.1021/nl101156v · Cited by 676
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Versatile ternary organic solar cells: a critical review
An, Q., Zhang, F., Zhang, J., Tang, W., Deng, Z., & Hu, B. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02641e · Cited by 645
Stretchable and self-healing polymers and devices for electronic skin
Benight, S. J., Wang, C., Tok, J. B. H., & Bao, Z. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.08.001 · Cited by 617
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Dewetting of conducting polymer inkjet droplets on patterned surfaces
Wang, J. Z., Zheng, Z. H., Li, H. W., Huck, W. T. S., & Sirringhaus, H. (2004) · Nature Materials · doi:10.1038/nmat1073 · Cited by 583
Thermoelectric plastics: from design to synthesis, processing and structure–property relationships
Kroon, R., Mengistie, D. A., Kiefer, D., Hynynen, J., Ryan, J. D., Yu, L., & Müller, C. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00149a · Cited by 577
Knitted and screen printed carbon-fiber supercapacitors for applications in wearable electronics
Jost, K., Stenger, D., Perez, C. R., McDonough, J. K., Lian, K., Gogotsi, Y., & Dion, G. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40515j · Cited by 556
Stretchable Thin‐Film Electrodes for Flexible Electronics with High Deformability and Stretchability
Cheng, T., Zhang, Y., Lai, W., & Huang, W. (2015) · Advanced Materials · doi:10.1002/adma.201405864 · Cited by 534
Sun, Y., Sheng, P., Di, C., Jiao, F., Xu, W., Qiu, D., & Zhu, D. (2012) · Advanced Materials · doi:10.1002/adma.201104305 · Cited by 532
Jeong, S., Woo, K., Kim, D., Lim, S., Kim, J. S., Shin, H., Xia, Y., & Moon, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700902 · Cited by 529
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
Energy Harvesters for Wearable and Stretchable Electronics: From Flexibility to Stretchability
Wu, H., Huang, Y., Xu, F., Duan, Y., & Yin, Z. (2016) · Advanced Materials · doi:10.1002/adma.201602251 · Cited by 520
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Paper‐Based Inkjet‐Printed Microfluidic Analytical Devices
Yamada, K., Henares, T. G., Suzuki, K., & Citterio, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411508 · Cited by 501
Bhardwaj, R., Fang, X., Somasundaran, P., & Attinger, D. (2010) · Langmuir · doi:10.1021/la9047227 · Cited by 499
Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components
Trung, T. Q., & Lee, N. (2017) · Advanced Materials · doi:10.1002/adma.201603167 · Cited by 497
Controllable Printing Droplets for High‐Resolution Patterns
Kuang, M., Wang, L., & Song, Y. (2014) · Advanced Materials · doi:10.1002/adma.201305416 · Cited by 479
Self-citationReactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
Walker, S. B., & Lewis, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209267c · Cited by 459
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
Stretchable Microfluidic Radiofrequency Antennas
Kubo, M., Li, X., Kim, C., Hashimoto, M., Wiley, B. J., Ham, D., & Whitesides, G. M. (2010) · Advanced Materials · doi:10.1002/adma.200904201 · Cited by 450
All-inkjet-printed, solid-state flexible supercapacitors on paper
Choi, K.-H., Yoo, J., Lee, C. K., & Lee, S.-Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00966b · Cited by 449
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Chen, P., Chen, H., Qiu, J., & Zhou, C. (2010) · Nano Research · doi:10.1007/s12274-010-0020-x · Cited by 435
Printed Carbon Nanotube Electronics and Sensor Systems
Chen, K., Gao, W., Emaminejad, S., Kiriya, D., Ota, H., Nyein, H. Y. Y., Takei, K., & Javey, A. (2016) · Advanced Materials · doi:10.1002/adma.201504958 · Cited by 425
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Sekitani, T., Noguchi, Y., Zschieschang, U., Klauk, H., & Someya, T. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0708340105 · Cited by 424
Inkjet‐Printed Quantum Dot–Polymer Composites for Full‐Color AC‐Driven Displays
Wood, V., Panzer, M. J., Chen, J., Bradley, M. S., Halpert, J. E., Bawendi, M. G., & Bulović, V. (2009) · Advanced Materials · doi:10.1002/adma.200803256 · Cited by 422
Toward the Development of Printable Nanowire Electronics and Sensors
Fan, Z., Ho, J. C., Takahashi, T., Yerushalmi, R., Takei, K., Ford, A. C., Chueh, Y., & Javey, A. (2009) · Advanced Materials · doi:10.1002/adma.200900860 · Cited by 387
Interfaces in bulk thermoelectric materials
Medlin, D. L., & Snyder, G. J. (2009) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2009.05.001 · Cited by 386
Patterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
Self-citationSpontaneous Partition of Carbon Nanotubes in Polymer-Modified Aqueous Phases
Khripin, C. Y., Fagan, J. A., & Zheng, M. (2013) · Journal of the American Chemical Society · doi:10.1021/ja402762e · Cited by 346
Chi, K., Zhang, Z., Xi, J., Huang, Y., Xiao, F., Wang, S., & Liu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504539k · Cited by 339
Schmidt, T. M., Larsen‐Olsen, T. T., Carlé, J. E., Angmo, D., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500569 · Cited by 336
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Kim, D., Jeong, S., Park, B. K., & Moon, J. (2006) · Applied Physics Letters · doi:10.1063/1.2424671 · Cited by 331
Conductive Inks with a “Built-In” Mechanism That Enables Sintering at Room Temperature
Grouchko, M., Kamyshny, A., Mihailescu, C. F., Anghel, D. F., & Magdassi, S. (2011) · ACS Nano · doi:10.1021/nn2005848 · Cited by 331
Moonen, P. F., Yakimets, I., & Huskens, J. (2012) · Advanced Materials · doi:10.1002/adma.201202949 · Cited by 304
Inkjet deposition of liquid-exfoliated graphene and MoS2nanosheets for printed device applications
Finn, D. J., Lotya, M., Cunningham, G., Smith, R. J., McCloskey, D., Donegan, J. F., & Coleman, J. N. (2014) · J. Mater. Chem. C · doi:10.1039/c3tc31993h · Cited by 292
Triboelectric Generators and Sensors for Self-Powered Wearable Electronics
Ha, M., Park, J., Lee, Y., & Ko, H. (2015) · ACS Nano · doi:10.1021/acsnano.5b01478 · Cited by 288
Inkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Kuang, M., Wang, J., Bao, B., Li, F., Wang, L., Jiang, L., & Song, Y. (2013) · Advanced Optical Materials · doi:10.1002/adom.201300369 · Cited by 261
Self-citationFabrication of low-cost electronic biosensors
Sokolov, A. N., Roberts, M. E., & Bao, Z. (2009) · Materials Today · doi:10.1016/s1369-7021(09)70247-0 · Cited by 260
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Li, J., Naiini, M. M., Vaziri, S., Lemme, M. C., & Östling, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400984 · Cited by 256
Fabrication of Flexible Thermoelectric Thin Film Devices by Inkjet Printing
Lu, Z., Layani, M., Zhao, X., Tan, L. P., Sun, T., Fan, S., Yan, Q., Magdassi, S., & Hng, H. H. (2014) · Small · doi:10.1002/smll.201303126 · Cited by 252
Micropatterning of Graphene Sheets by Inkjet Printing and Its Wideband Dipole‐Antenna Application
Shin, K., Hong, J., & Jang, J. (2011) · Advanced Materials · doi:10.1002/adma.201100345 · Cited by 252
Recent Advances in Controlling the Depositing Morphologies of Inkjet Droplets
Sun, J., Bao, B., He, M., Zhou, H., & Song, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07006 · Cited by 249
Self-citationLiquid metal stretchable unbalanced loop antenna
Cheng, S., Rydberg, A., Hjort, K., & Wu, Z. (2009) · Applied Physics Letters · doi:10.1063/1.3114381 · Cited by 245
Highly Stretchable Transistors Using a Microcracked Organic Semiconductor
Chortos, A., Lim, J., To, J. W. F., Vosgueritchian, M., Dusseault, T. J., Kim, T., Hwang, S., & Bao, Z. (2014) · Advanced Materials · doi:10.1002/adma.201305462 · Cited by 243
Inkjet printing of CH3NH3PbI3on a mesoscopic TiO2film for highly efficient perovskite solar cells
Li, S.-G., Jiang, K.-J., Su, M.-J., Cui, X.-P., Huang, J.-H., Zhang, Q.-Q., Zhou, X.-Q., Yang, L.-M., & Song, Y.-L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05675b · Cited by 242
Self-citationSynthesis of Phase Transferable Graphene Sheets Using Ionic Liquid Polymers
Kim, T., Lee, H., Kim, J., & Suh, K. S. (2010) · ACS Nano · doi:10.1021/nn901525e · Cited by 237
Kang, M., Baeg, K., Khim, D., Noh, Y., & Kim, D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203417 · Cited by 226
A Miniaturized Flexible Antenna Printed on a High Dielectric Constant Nanopaper Composite
Inui, T., Koga, H., Nogi, M., Komoda, N., & Suganuma, K. (2015) · Advanced Materials · doi:10.1002/adma.201404555 · Cited by 221
Tunable Carbon Nanotube Thin‐Film Transistors Produced Exclusively via Inkjet Printing
Okimoto, H., Takenobu, T., Yanagi, K., Miyata, Y., Shimotani, H., Kataura, H., & Iwasa, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000889 · Cited by 219
Fabrication of Transparent Multilayer Circuits by Inkjet Printing
Jiang, J., Bao, B., Li, M., Sun, J., Zhang, C., Li, Y., Li, F., Yao, X., & Song, Y. (2016) · Advanced Materials · doi:10.1002/adma.201503682 · Cited by 211
Self-citationSynthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics
Zhang, Z., Zhang, X., Xin, Z., Deng, M., Wen, Y., & Song, Y. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/42/425601 · Cited by 208
Self-citationCoalescence of Spreading Droplets on a Wettable Substrate
Ristenpart, W. D., McCalla, P. M., Roy, R. V., & Stone, H. A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.064501 · Cited by 205
Kang, B., Han, S., Kim, J., Ko, S., & Yang, M. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp205281a · Cited by 204
Visualization of asymmetric wetting ridges on soft solids with X-ray microscopy
Park, S. J., Weon, B. M., Lee, J. S., Lee, J., Kim, J., & Je, J. H. (2014) · Nature Communications · doi:10.1038/ncomms5369 · Cited by 203
Foldable nanopaper antennas for origami electronics
Nogi, M., Komoda, N., Otsuka, K., & Suganuma, K. (2013) · Nanoscale · doi:10.1039/c3nr00231d · Cited by 202
Inkjet Printing of Carbon Nanotubes
Tortorich, R., & Choi, J.-W. (2013) · Nanomaterials · doi:10.3390/nano3030453 · Cited by 199
Printing Patterned Fine 3D Structures by Manipulating the Three Phase Contact Line
Wu, L., Dong, Z., Kuang, M., Li, Y., Li, F., Jiang, L., & Song, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404559 · Cited by 190
Self-citationPang, H., Zhang, Y., Lai, W.-Y., Hu, Z., & Huang, W. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.034 · Cited by 188
Nanoparticle Based Curve Arrays for Multirecognition Flexible Electronics
Su, M., Li, F., Chen, S., Huang, Z., Qin, M., Li, W., Zhang, X., & Song, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504759 · Cited by 184
Self-citationGuo, R., Yu, Y., Xie, Z., Liu, X., Zhou, X., Gao, Y., Liu, Z., Zhou, F., Yang, Y., & Zheng, Z. (2013) · Advanced Materials · doi:10.1002/adma.201301184 · Cited by 181
Flexible Photodetectors Based on 1D Inorganic Nanostructures
Lou, Z., & Shen, G. (2016) · Advanced Science · doi:10.1002/advs.201500287 · Cited by 179
Inkjet Printing High‐Resolution, Large‐Area Graphene Patterns by Coffee‐Ring Lithography
Zhang, L., Liu, H., Zhao, Y., Sun, X., Wen, Y., Guo, Y., Gao, X., Di, C., Yu, G., & Liu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201103620 · Cited by 177
Thin, lightweight, foldable thermochromic displays on paper
Siegel, A. C., Phillips, S. T., Wiley, B. J., & Whitesides, G. M. (2009) · Lab on a Chip · doi:10.1039/b905832j · Cited by 174
Inkjet‐Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces
Khan, Y., Pavinatto, F. J., Lin, M. C., Liao, A., Swisher, S. L., Mann, K., Subramanian, V., Maharbiz, M. M., & Arias, A. C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503316 · Cited by 165
Lessons Learned: From Dye‐Sensitized Solar Cells to All‐Solid‐State Hybrid Devices
Docampo, P., Guldin, S., Leijtens, T., Noel, N. K., Steiner, U., & Snaith, H. J. (2014) · Advanced Materials · doi:10.1002/adma.201400486 · Cited by 162
All-printed humidity sensor based on graphene/methyl-red composite with high sensitivity
Ali, S., Hassan, A., Hassan, G., Bae, J., & Lee, C. H. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.013 · Cited by 161
Lien, D., Kao, Z.-K., Huang, T.-H., Liao, Y., Lee, S., & He, J. (2014) · ACS Nano · doi:10.1021/nn501231z · Cited by 158
Transparent Electrodes Printed with Nanocrystal Inks for Flexible Smart Devices
Song, J., & Zeng, H. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201501233 · Cited by 153
Electrically conductive lines on cellulose nanopaper for flexible electrical devices
Hsieh, M.-C., Kim, C., Nogi, M., & Suganuma, K. (2013) · Nanoscale · doi:10.1039/c3nr01951a · Cited by 152
Active Digital Microfluidic Paper Chips with Inkjet‐Printed Patterned Electrodes
Ko, H., Lee, J., Kim, Y.-J., Lee, B., Jung, C., Choi, J., Kwon, O., & Shin, K. (2014) · Advanced Materials · doi:10.1002/adma.201305014 · Cited by 152
Microstructure formation in molecular and polymer semiconductors assisted by nucleation agents
Treat, N. D., Malik, J. A. N., Reid, O. G., et al. (2013) · Nature Materials · doi:10.1038/nmat3655 · Cited by 151
Wang, S., Liu, N., Tao, J., Yang, C., Liu, W., Shi, Y., Wang, Y., Su, J., Li, L., & Gao, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05625f · Cited by 149
Self-citationLu, H., Lin, J., Wu, N., Nie, S., Luo, Q., Ma, C., & Cui, Z. (2015) · Applied Physics Letters · doi:10.1063/1.4913697 · Cited by 144
Lee, D., Paeng, D., Park, H. K., et al. (2014) · ACS Nano · doi:10.1021/nn503383z · Cited by 141
Shape-Tailorable Graphene-Based Ultra-High-Rate Supercapacitor for Wearable Electronics
Xie, B., Yang, C., Zhang, Z., Zou, P., Lin, Z., Shi, G., Yang, Q., Kang, F., & Wong, C. (2015) · ACS Nano · doi:10.1021/acsnano.5b00899 · Cited by 141
High-Speed, Inkjet-Printed Carbon Nanotube/Zinc Tin Oxide Hybrid Complementary Ring Oscillators
Kim, B.-J., Jang, S., Geier, M. L., Prabhumirashi, P. L., Hersam, M. C., & Dodabalapur, A. (2014) · Nano Letters · doi:10.1021/nl5016014 · Cited by 139
Manipulating and Dispensing Micro/Nanoliter Droplets by Superhydrophobic Needle Nozzles
Dong, Z., Ma, J., & Jiang, L. (2013) · ACS Nano · doi:10.1021/nn4048099 · Cited by 138
Wei, Y., Chen, S., Li, F., Lin, Y. Q., Zhang, Y., & Liu, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03824 · Cited by 138
Liscio, A., Veronese, G. P., Treossi, E., et al. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm02940h · Cited by 137
Flexible Miniaturized Nickel Oxide Thermistor Arrays via Inkjet Printing Technology
Huang, C.-C., Kao, Z.-K., & Liao, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404872j · Cited by 128
Textile‐Based Flexible Electroluminescent Devices
Hu, B., Li, D., Ala, O., Manandhar, P., Fan, Q., Kasilingam, D. P., & Calvert, P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001110 · Cited by 127
Huang, W., Besar, K., Zhang, Y., Yang, S., Wiedman, G. R., Liu, Y., Guo, W., Song, J. J., Hemker, K. J., Hristova, K. A., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404228 · Cited by 124
Printed thermoelectric materials and devices: Fabrication techniques, advantages, and challenges
Orrill, M., & LeBlanc, S. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44256 · Cited by 118
Zhang, T., Wang, X., Li, T., et al. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc31740d · Cited by 113
Inkjet-printed graphene electrodes for dye-sensitized solar cells
Dodoo‐Arhin, D., Howe, R. C. T., Hu, G., Zhang, Y., Hiralal, P., Bello, A., Amaratunga, G. A. J., & Hasan, T. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.012 · Cited by 111
Inkjet-printed stretchable silver electrode on wave structured elastomeric substrate
Chung, S., Lee, J., Song, H., Kim, S., Jeong, J., & Hong, Y. (2011) · Applied Physics Letters · doi:10.1063/1.3578398 · Cited by 106
Printing nanostructured carbon for energy storage and conversion applications
Lawes, S., Riese, A., Sun, Q., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.008 · Cited by 105
Emerging Progress of Inkjet Technology in Printing Optical Materials
Wu, L., Dong, Z., Li, F., Zhou, H., & Song, Y. (2016) · Advanced Optical Materials · doi:10.1002/adom.201600466 · Cited by 104
Self-citationAn, B. W., Kim, K., Kim, M., Kim, S.-Y., Hur, S. H., & Park, J. (2015) · Small · doi:10.1002/smll.201403131 · Cited by 103
Stitchable organic photovoltaic cells with textile electrodes
Lee, S., Lee, Y., Park, J., & Choi, D. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.06.017 · Cited by 100
Wang, L., Wang, J., Huang, Y., Liu, M., Kuang, M., Li, Y., Jiang, L., & Song, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33411a · Cited by 99
Self-citationMorphology and dynamics of droplet coalescence on a surface
Kapur, N., & Gaskell, P. (2007) · Physical Review E · doi:10.1103/physreve.75.056315 · Cited by 95
Wang, H., Cheng, C., Zhang, L., Liu, H., Zhao, Y. J., Guo, Y., Hu, W., Yu, G., & Liu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201400697 · Cited by 94
Kong, D., Pfattner, R., Chortos, A., Lu, C., Hinckley, A. C., Wang, C., Lee, W., Chung, J. W., & Bao, Z. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600612 · Cited by 88
Gracia‐Espino, E., Sala, G., Pino, F., Halonen, N., Luomahaara, J., Mäklin, J., Tóth, G., Kordás, K., Jantunen, H. M., Terrones, M., et al. (2010) · ACS Nano · doi:10.1021/nn1000723 · Cited by 86
Metal-Free, Single-Polymer Device Exhibits Resistive Memory Effect
Bhansali, U. S., Khan, M. A., Cha, D., Almadhoun, M. N., Li, R., Chen, L., Amassian, A., Odeh, I. N., & Alshareef, H. N. (2013) · ACS Nano · doi:10.1021/nn403873c · Cited by 83
Sanchez‐Romaguera, V., Wünscher, S., Turki, B. M., et al. (2015) · Journal of Materials Chemistry C · doi:10.1039/c4tc02693d · Cited by 82
Ma, S., Liu, L., Bromberg, V., & Singler, T. J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506102w · Cited by 80
Georgakilas, V. I., Demeslis, A., Ntararas, E., Kouloumpis, Α., Dimos, K., Gournis, D., Kocman, M., Otyepka, M., & Zbořil, R. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201403801 · Cited by 77
High performance dye-sensitized solar cells with inkjet printed ionic liquid electrolyte
Hashmi, S. G., Özkan, M., Halme, J., Dimić‐Mišić, K., Zakeeruddin, S. M., Paltakari, J., Grätzel, M., & Lund, P. D. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.019 · Cited by 76
The effect of contact angle hysteresis on droplet coalescence and mixing
Nilsson, M. A., & Rothstein, J. P. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.07.086 · Cited by 76
Zhang, W., Bi, E., Li, M., & Gao, L. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.11.014 · Cited by 76
Kim, T., Song, H., Ha, J., Kim, S., Kim, D., Chung, S., Lee, J., & Hong, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4868633 · Cited by 72
Inkjet-printed highly conductive transparent patterns with water based Ag-doped graphene
Li, L., Guo, Y., Zhang, X., & Song, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04156a · Cited by 71
Self-citationSolution Processed Aluminum Paper for Flexible Electronics
Lee, H. M., Lee, H. B., Jung, D. S., Yun, J., Ko, S. H., & Park, S. B. (2012) · Langmuir · doi:10.1021/la302479x · Cited by 71
Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes
Azoubel, S., Shemesh, S., & Magdassi, S. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/34/344003 · Cited by 68
Fabrication of Novel Transparent Touch Sensing Device via Drop-on-Demand Inkjet Printing Technique
Ma, S., Ribeiro, F., Powell, K. D., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04717 · Cited by 68
Inkjet printed flexible electrodes for surface electromyography
Scalisi, R. G., Paleari, M., Favetto, A., Stoppa, M., Ariano, P., Pandolfi, P., & Chiolerio, A. (2015) · Organic Electronics · doi:10.1016/j.orgel.2014.12.017 · Cited by 64
Kim, S., Byun, J., Choi, S.-D., Kim, D., Kim, T., Chung, S., & Hong, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304686 · Cited by 62
Direct Writing of Patterned, Lead‐Free Nanowire Aligned Flexible Piezoelectric Device
Gao, M., Li, L., Li, W., Zhou, H., & Song, Y. (2016) · Advanced Science · doi:10.1002/advs.201600120 · Cited by 60
Self-citationHu, B., Li, D., Manandharm, P., Fan, Q., Kasilingam, D. P., & Calvert, P. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm14121j · Cited by 56
Reinventing Butyl Rubber for Stretchable Electronics
Vohra, A., Filiatrault, H. L., Amyotte, S. D., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601283 · Cited by 38
Highly Efficient Flexible Hybrid Nanocrystal‐Cu(In,Ga)Se2 (CIGS) Solar Cells
Liao, Y.-K., Brossard, M., Hsieh, D., Lin, T., Charlton, M. D. B., Cheng, S., Chen, C., Shen, J., Cheng, L., Hsieh, T., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201401280 · Cited by 36
Facile Method for Fabricating Flexible Substrates with Embedded, Printed Silver Lines
Mahajan, A., Francis, L. F., & Frisbie, C. D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am405314s · Cited by 25
Butovsky, E., Perelshtein, I., Nissan, I., & Gedanken, A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300837 · Cited by 19
Cited by
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Dong, K., Peng, X., & Wang, Z. L. (2020) · Advanced Materials · doi:10.1002/adma.201902549 · Cited by 1,322
Wearable and flexible electronics for continuous molecular monitoring
Yang, Y., & Gao, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00730b · Cited by 1,315
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
Emerging Electrochromic Materials and Devices for Future Displays
Gu, C., Jia, A.-B., Zhang, Y.-M., & Zhang, S. X.-A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01055 · Cited by 833
Metadata
- Authors
- Gao, M., Li, L., & Song, Y.
- Venue
- Journal of Materials Chemistry C
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2017
- Volume
- 5
- Issue
- 12
- Pages
- 2971-2993
- ISSN
- 2050-7526 (ISSN-L)
- 2050-7534
- OpenAlex
- W2592148915
- Cited by
- 535
- References
- 163
- FWCI
- 21.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.