The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fault-tolerant permanent magnet machines: a review
Abstract
Synchronous permanent magnet (PM) machines have been gaining a lot of interest over the years. This is due to their several advantages including high power density, high efficiency and high reliability. One of the key concerns about PM machines especially in safety-critical applications (such as the more-electric aircraft) has been the issue of fault-tolerance since the machine cannot be de-excited. A lot of work has been done both on the machine side as well as the power converter side (including power converter configuration and remedial control strategies). This study will provide a thorough review and summary of what has been covered in literature up-to-date. The study will highlight the tradeoffs (including weight, cost and reliability) involved in the various proposed methods and strategies with more emphasis on the machine side. The methods discussed in this study include active control methods form converter side, memory motors, doubly-salient and flux-switching machines, use of auxiliary windings, mechanical flux-weakening methods, use of shunts and shields, thermal protection and transverse flux machines. The study will also include some comments about where the research in this area is heading in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fault-tolerant permanent magnet machinedrives
Mecrow, B. C., Jack, A. G., Haylock, J. A., & Coles, J. (1996) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19960796 · Cited by 376
Research works printed but not linked: 63
- 10.1109/60.815095 · DOI
- 10.1049/ip-epa:20040686 · DOI
- 10.1049/ip-epa:20040584 · DOI
- Bianchi, 2005, Proc. 2005 IEEE Int. Conf. on Electrical Machines and Drives (IEMDC)
- 10.1049/ip-epa:19982164 · DOI
- 10.1109/TEC.2004.832074 · DOI · Paper page
- 10.1109/TIA.2006.880869 · DOI
- Bennett, 2005, 2005 IEEE Int. Conf. on Electrical Machines and Drives, 41, 10.1109/IEMDC.2005.195699 · DOI
- Bennett, 2004, IEEE 35th Power Electronics Specialists Conf., PESC’04, 4371, 10.1109/PESC.2004.1354773 · DOI
- Chai, 2007, Conference record of the 2007 IEEE Industry Applications Conf. 2007, 42nd IAS Annual Meeting, 566
- 10.1109/TIA.2007.900445 · DOI · Paper page
- Bianchi, 2006, IEEE 37th Power Electronics Specialists Conf., PESC’06, 1, 10.1109/PESC.2006.1712039 · doi:10.1109/pesc.2006.1712039
- 10.1109/TIE.2008.920645 · DOI
- Bianchini, 2008, IEEE 34th Annual Industrial Electronics Conf., IECON’08, 1200, 10.1109/IECON.2008.4758125 · DOI
- Bianchi, 2008, IEEE 39th Power Electronics Specialists Conf., PESC’08, 2528, 10.1109/PESC.2008.4592321 · doi:10.1109/pesc.2008.4592321
- 10.1109/TIA.2004.841021 · DOI · Paper page
- Parsa, 2005, IEEE Electric Ship Technologies Symp., 371, 10.1109/ESTS.2005.1524702 · doi:10.1109/ests.2005.1524702
- 10.1109/TIA.2006.887235 · doi:10.1109/tia.2006.887235
- 10.1109/TIE.2008.920643 · DOI · Paper page
- Dwari, 2007, Conference record of the 2007 IEEE Industry Applications Conf. 2007, 42nd IAS Annual Meeting, 1329
- Dwari, 2007, Annual IEEE Applied Power Electronics Conf., 1417
- Dwari, 2007, IEEE 38th Power Electronics Specialists Conf., PESC’07, 1639, 10.1109/PESC.2007.4342242 · doi:10.1109/pesc.2007.4342242
- Ouyang, 2007, IEEE Int. Conf. on Electrical Machines and Drives, 787, 10.1109/IEMDC.2007.382768 · doi:10.1109/iemdc.2007.382768
- 10.1109/TIE.2008.925313 · doi:10.1109/tie.2008.925313
- Locment, 2006, IEEE 32nd Annual Industrial Electronics Conf., IECON’06, 1101, 10.1109/IECON.2006.347611 · doi:10.1109/iecon.2006.347611
- Bianchi, 2005, IEEE Vehicle Power and Propulsion Conf., 747, 10.1109/VPPC.2005.1554642 · DOI
- 10.1109/TVT.2006.877716 · DOI
- Benedetti, 2005, Conference record of the 2005 IEEE Industry Applications Conf., 2005, 40th IAS Annual Meeting, 2857, 10.1109/IAS.2005.1518865 · doi:10.1109/ias.2005.1518865
- 10.1109/TVT.2007.896978 · DOI · Paper page
- 10.1109/TEC.2002.808334 · DOI
- 10.1109/TPEL.2004.830074 · DOI · Paper page
- Bennett, 2004, Conf. on Power Electronics, Machines, and Drives, PEMD'04, 332
- Argille, 2008, Fourth IET Conf. on Power Electronics, Machines, and Drives, PEMD, 11, 10.1049/cp:20080474 · DOI
- 10.1049/ip-epa:20030911 · DOI
- 10.1109/LPEL.2004.841494 · doi:10.1109/lpel.2004.841494
- 10.1109/TIA.2005.861313 · DOI
- Welchko, 2004, IEEE 35th Power Electronics Specialists Conf., PESC’04, 2133, 10.1109/PESC.2004.1355448 · DOI
- 10.1109/MIA.2003.1176459 · doi:10.1109/mia.2003.1176459
- Liao, 1992, Record of 1992 IEEE Industry Applications Society Annual Meeting, 1, 308, 10.1109/IAS.1992.244279 · doi:10.1109/ias.1992.244279
- Shakal, 1993, Proc. IEEE Int. Symp. on Industrial Electronics, ISIE’93, 19
- Lipo, 1995, JESC'95, Japan, 1
- Li, 1995, Record of 1995 IEEE Power Electronics Specialists Conf., 1, 565
- Lipo, 1995, IEEE Int. Symp. on Electric Power Engineering
- Luo, 1996, Record of 1996 IEEE Industry Applications Society Annual Meeting, 2, 808
- Leonardi, 1996, Record of 1996 IEEE Industry Applications Society Annual Meeting, 1, 458
- 10.1109/TMAG.2003.816722 · doi:10.1109/tmag.2003.816722
- Hua, 2008, Record of 2008 IEEE Industry Applications Society Annual Meeting, 1, 1, 10.1109/08IAS.2008.58 · doi:10.1109/08ias.2008.58
- Cheng, 2005, Record of 2005 IEEE Industry Applications Society Annual Meeting, 3, 2168
- Pollock, 2003, Record of 2003 IEEE Industry Applications Society Annual Meeting, 3, 1451
- Pollock, 2005, Record of 2005 IEEE Industry Applications Society Annual Meeting, 1, 242
- Zhao, 2008, Record of 2008 Vehicle Power and Propulsion Conf., 1, 1, 10.1109/VPPC.2008.4677450 · doi:10.1109/vppc.2008.4677450
- Thomas, 2005, Record of 2005 IEEE Industry Applications Society Annual Meeting, 1, 1
- 10.1109/TIA.2003.818993 · doi:10.1109/tia.2003.818993
- Aydin, 2002, Record of 2002 IEEE Industry Applications Society Annual Meeting, 2, 1250, 10.1109/IAS.2002.1042719 · doi:10.1109/ias.2002.1042719
- Caricchi, 2001, Record of 2001 IEEE Industry Applications Society Annual Meeting, 3, 1626, 10.1109/IAS.2001.955752 · doi:10.1109/ias.2001.955752
- Lipo, 2004, Power Electronics and Motion Control Conf., EPE-PEMC’04
- 10.1109/TIA.2009.2039914 · doi:10.1109/tia.2009.2039914
- 10.1109/TIA.2003.818990 · doi:10.1109/tia.2003.818990
- Bang, 2008, Int. Conf. on Electrical Machines, ICEM 2008, 1, 10.1109/ICELMACH.2008.4800027 · doi:10.1109/icelmach.2008.4800027
- Baserrah, 2009, Int. Conf. on Power Electronics and Drive Systems, PEDS, 102, 10.1109/PEDS.2009.5385859 · doi:10.1109/peds.2009.5385859
- Gieras, 2005, IEEE Int. Conf. on Electric Machines and Drives, 1293, 10.1109/IEMDC.2005.195889 · doi:10.1109/iemdc.2005.195889
- Mitcham, 1997, IEE Colloquium on New Topologies for Permanent Magnet Machines (Digest No: 1997/090), 3/1
- Husband, 2003, IEEE Int. Electric Machines and Drives Conf., IEMDC’03, 3, 1435, 10.1109/IEMDC.2003.1210640 · doi:10.1109/iemdc.2003.1210640
Cited by
Modular Multilevel Converters for Transportation Electrification: Challenges and Opportunities
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2792330 · Cited by 345
“machines [8], power converter topologies [9], [10], and control schemes [7], [10] are addressed in the literature.”
BackgroundFault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“In [312] a detailed review and summary on the PMFT machine design is presented, with an emphasis on limiting the short-circuit current.”
BackgroundBhuiyan, E. A., Akhand, M. M. A., Das, S. K., Ali, M. F., Tasneem, Z., Islam, M. R., Saha, D. K., Badal, F. R., Ahamed, M. H., & Moyeen, S. I. (2020) · International Journal of Automation and Computing · doi:10.1007/s11633-020-1250-3 · Cited by 68
Jiang, Y., Zhang, Z., Jiang, W., Geng, W., & Huang, J. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0754 · Cited by 45
Change‐detection algorithm for short‐circuit fault detection in closed‐loop AC drives
Meinguet, F., Semail, E., Kestelyn, X., Mollet, Y., & Gyselinck, J. (2014) · IET Electric Power Applications · doi:10.1049/iet-epa.2012.0316 · Cited by 34
Metadata
- Authors
- El-Refaie, A. M.
- Venue
- IET Electric Power Applications
- Published
- 2011-01-04
- Volume
- 5
- Issue
- 1
- Pages
- 59-74
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2121184667
- Cited by
- 207
- References
- 1
- FWCI
- 16.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.