The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Family of multiport bidirectional DC–DC converters
Open accessAbstract
Multiport DC–DC converters are of potential interest in applications such as generation systems utilising multiple sustainable energy sources. A family of multiport bidirectional DC–DC converters derived from a general topology is presented. The topology shows a combination of DC-link and magnetic coupling. This structure makes use of both methods to interconnect multiple sources without the penalty of extra conversion or additional switches. The resulting converters have the advantage of being simple in topology and have a minimum number of power devices. The proposed general topology and basic cells show several possibilities to construct a multiport converter for particular applications and provide a solution to integrate diverse sources owing to their flexibility in structure. The system features a minimal number of conversion steps, low cost and compact packaging. In addition, the control and power management of the converter by a single digital processor is possible. The centralised control eliminates complicated communication structures that would be necessary in the conventional structure based on separate conversion stages. A control strategy based on classical control theory is proposed, showing a multiple PID-loop structure. The general topology and a set of three-port embodiments are detailed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
A multiple-input DC-DC converter topology
Dobbs, B. G., & Chapman, P. L. (2003) · IEEE Power Electronics Letters · doi:10.1109/lpel.2003.813481 · Cited by 511
Design of Multiple-Input Power Converter for Hybrid Vehicles
Solero, L., Lidozzi, A., & Pomilio, J. A. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854020 · Cited by 478
Characteristics of the Multiple-Input DC–DC Converter
Matsuo, H., Lin, W., Kurokawa, F., Shigemizu, T., & Watanabe, N. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825362 · Cited by 385
Zhu, L. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869730 · Cited by 381
Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications
Chen, Y.-M., Liu, Y.-C., & Wu, F.-Y. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800776 · Cited by 350
Bi-directional DC to DC converters for fuel cell systems
Wang, K., Lin, C. Y., Zhu, L., Qu, D., Lee, F. C., & Lai, J. S. (2002) · Power Electronics in Transportation (Cat. No.98TH8349) · doi:10.1109/pet.1998.731056 · Cited by 208
Parasitic Ringing and Design Issues of Digitally Controlled High Power Interleaved Boost Converters
Huang, X., Wang, X., Nergaard, T., Lai, J.-S., Xu, X., & Zhu, L. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.833434 · Cited by 165
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2005) · Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005. · doi:10.1109/ias.2005.1518725 · Cited by 161
Self-citationA three-port bi-directional converter for hybrid fuel cell systems
Michon, M., Duarte, J. L., Hendrix, M., & Simoes, M. G. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1354836 · Cited by 160
Self-citation
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Advances and trends of energy storage technology in Microgrid
Tan, X., Li, Q., & Wang, H. (2013) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2012.07.015 · Cited by 586
Falcones, S., Ayyanar, R., & Mao, X. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2215965 · Cited by 501
Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input Range
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915129 · Cited by 478
Self-citationTopologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
Review of Multiport Converters for Solar and Energy Storage Integration
Bhattacharjee, A. K., Kutkut, N., & Batarseh, I. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2830788 · Cited by 423
Krishnaswami, H., & Mohan, N. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2022756 · Cited by 411
Nejabatkhah, F., Danyali, S., Hosseini, S. H., Sabahi, M., & Niapour, S. M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2172465 · Cited by 406
Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching
Tao, H., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915023 · Cited by 404
Self-citationModeling and Control of Three-Port DC/DC Converter Interface for Satellite Applications
Qian, Z., Abdel-Rahman, O., Al-Atrash, H., & Batarseh, I. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2033926 · Cited by 399
Kwasinski, A. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2102774 · Cited by 288
Identification of Feasible Topologies for Multiple-Input DC–DC Converters
Kwasinski, A. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2009538 · Cited by 267
Multiport Power Electronic Interface—Concept, Modeling, and Design
Jiang, W., & Fahimi, B. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2093583 · Cited by 259
Power converter interfaces for electrochemical energy storage systems – A review
Fernão Pires, V., Romero-Cadaval, E., Vinnikov, D., Roasto, I., & Martins, J. F. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.05.003 · Cited by 254
Gu, C., Zheng, Z., Xu, L., Wang, K., & Li, Y. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2416212 · Cited by 221
Analysis and implementation of a bidirectional ZVS dc-dc converter with active clamp
Lin, B.-R., Chen, J.-J., Lee, Y.-E., & Chiang, H.-K. (2008) · 2008 3rd IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2008.4582544 · Cited by 19
Comparative analysis of MAB dc-dc converters configurations in modular smart transformer
Costa, L. F., Hoffmann, F., Buticchi, G., & Liserre, M. (2017) · 2017 IEEE 8th International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2017.7972558 · Cited by 17
Metadata
- Authors
- Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M.
- Venue
- IEE Proceedings - Electric Power Applications
- Published
- 2006-05
- Volume
- 153
- Issue
- 3
- Pages
- 451-458
- ISSN
- 1350-2352 (ISSN-L)
- 1359-7043
- OpenAlex
- W2158663644
- Cited by
- 488
- References
- 16
- FWCI
- 12.48
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.