The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etching
Abstract
This letter describes a technique that can be used to produce well-defined features of gold. The technique involves patterning of a self-assembled monolayer (SAM) on a gold substrate using an elastomer stamp (fabricated either from a phenol-formaldehyde polymer or polydimethylsiloxane), followed by selective etching in an aqueous, basic solution of cyanide ion and dissolved dioxygen (1M KOH, 0.1 M KCN). Electrically conductive structures of gold with dimensions as small as 1 μm have been produced using this procedure. Once a rubber stamp is fabricated, patterning and etching of gold substrates is straightforward. This method is convenient, does not require routine access to clean rooms and photolithographic equipment, and can be used to produce multiple copies of a pattern.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1999) · Choice Reviews Online · doi:10.5860/choice.37-0940 · Cited by 14,314
Semiconductor Lithography: Principles, Practices, and Materials
Moreau, W. M. (1988) · Springer eBooks · doi:10.1007/978-1-4613-0885-0 · Cited by 394
Cited by
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Self-citationElectronics using hybrid-molecular and mono-molecular devices
Joachim, C., Gimzewski, J. K., & Aviram, A. (2000) · Nature · doi:10.1038/35046000 · Cited by 3,077
Soft Lithography in Biology and Biochemistry
Whitesides, G. M., Ostuni, E., Takayama, S., Jiang, X., & Ingber, D. E. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.335 · Cited by 2,607
Self-citationStructure and growth of self-assembling monolayers
Schreiber, F. (2000) · Progress in Surface Science · doi:10.1016/s0079-6816(00)00024-1 · Cited by 2,484
Soft lithography for micro- and nanoscale patterning
Qin, D., Xia, Y., & Whitesides, G. M. (2010) · Nature Protocols · doi:10.1038/nprot.2009.234 · Cited by 2,334
Self-citationNew Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Self-citationMicrofluidic lab-on-a-chip platforms: requirements, characteristics and applications
Mark, D., Haeberle, S., Roth, G., von Stetten, F., & Zengerle, R. (2010) · Chemical Society Reviews · doi:10.1039/b820557b · Cited by 1,647
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Enabling nanotechnology with self assembled block copolymer patterns
Park, C., Yoon, J., & Thomas, E. L. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.011 · Cited by 1,473
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Self-citationRogers, J. A., Bao, Z., Baldwin, K., Dodabalapur, A., Crone, B., Raju, V. R., Kuck, V., Katz, H., Amundson, K., Ewing, J., et al. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.091588098 · Cited by 1,117
Surface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Patterning surfaces with functional polymers
Nie, Z., & Kumacheva, E. (2008) · Nature Materials · doi:10.1038/nmat2109 · Cited by 935
Block Copolymer Thin Films: Physics and Applications
Fasolka, M. J., & Mayes, A. M. (2001) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.31.1.323 · Cited by 904
Polymer microstructures formed by moulding in capillaries
Kim, E., Xia, Y., & Whitesides, G. M. (1995) · Nature · doi:10.1038/376581a0 · Cited by 878
Self-citationHigh-k Organic, Inorganic, and Hybrid Dielectrics for Low-Voltage Organic Field-Effect Transistors
Ortiz, R. P., Facchetti, A., & Marks, T. J. (2010) · Chemical Reviews · doi:10.1021/cr9001275 · Cited by 871
Polymer microfabrication technologies for microfluidic systems
Becker, H., & Gärtner, C. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-007-1692-2 · Cited by 860
Patterning self-assembled monolayers
Smith, R. K., Lewis, P. A., & Weiss, P. S. (2004) · Progress in Surface Science · doi:10.1016/j.progsurf.2003.12.001 · Cited by 807
Sze, A., Erickson, D., Ren, L., & Li, D. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(03)00142-5 · Cited by 774
Biomimetic Pathways for Assembling Inorganic Thin Films
Aksay, I. A., Trau, M., Manne, S., Honma, I., Yao, N., Zhou, L., Fenter, P., Eisenberger, P. M., & Gruner, S. M. (1996) · Science · doi:10.1126/science.273.5277.892 · Cited by 743
MOF positioning technology and device fabrication
Falcaro, P., Ricco, R., Doherty, C. M., Liang, K., Hill, A. J., & Styles, M. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00089g · Cited by 710
Ma, H., Hyun, J., Stiller, P., & Chilkoti, A. (2004) · Advanced Materials · doi:10.1002/adma.200305830 · Cited by 680
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Complex Optical Surfaces Formed by Replica Molding Against Elastomeric Masters
Xia, Y., Kim, E., Zhao, X.-M., Rogers, J. A., Prentiss, M., & Whitesides, G. M. (1996) · Science · doi:10.1126/science.273.5273.347 · Cited by 643
Self-citationPatterning: Principles and Some New Developments
Geissler, M., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400835 · Cited by 641
Field emission from carbon nanotubes: the first five years
Bonard, J.-M., Kind, H., Stöckli, T., & Nilsson, L.-O. (2001) · Solid-State Electronics · doi:10.1016/s0038-1101(00)00213-6 · Cited by 635
Microengineering of Cellular Interactions
Folch, A., & Toner, M. (2000) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.2.1.227 · Cited by 602
Micropatterning Fluid Lipid Bilayers on Solid Supports
Groves, J. T., Ulman, N., & Boxer, S. G. (1997) · Science · doi:10.1126/science.275.5300.651 · Cited by 573
Microcontact printing: A tool to pattern
Alom Ruiz, S., & Chen, C. S. (2007) · Soft Matter · doi:10.1039/b613349e · Cited by 528
Bernard, A., Delamarche, E., Schmid, H., Michel, B., Bosshard, H. R., & Biebuyck, H. (1998) · Langmuir · doi:10.1021/la980037l · Cited by 518
Recent progress in soft lithography
Rogers, J. A., & Nuzzo, R. G. (2005) · Materials Today · doi:10.1016/s1369-7021(05)00702-9 · Cited by 509
Cell–Material Interactions Revealed Via Material Techniques of Surface Patterning
Yao, X., Peng, R., & Ding, J. (2013) · Advanced Materials · doi:10.1002/adma.201301762 · Cited by 501
Engineering metallic nanostructures for plasmonics and nanophotonics
Lindquist, N. C., Nagpal, P., McPeak, K. M., Norris, D. J., & Oh, S.-H. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/3/036501 · Cited by 497
Advances in 3D nano/microfabrication using two-photon initiated polymerization
Lee, K.-S., Kim, R. H., Yang, D.-Y., & Park, S. H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.01.001 · Cited by 475
Integration of Cell Culture and Microfabrication Technology
Park, T. H., & Shuler, M. L. (2003) · Biotechnology Progress · doi:10.1021/bp020143k · Cited by 473
Printing meets lithography: Soft approaches to high-resolution patterning
Michel, B., Bernard, A., Bietsch, A., Delamarche, E., Geissler, M., Juncker, D., Kind, H., Renault, J.-P., Rothuizen, H., Schmid, H., et al. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.455.0697 · Cited by 471
Microfabrication by microcontact printing of self‐assembled monolayers
Wilbur, J. L., Kumar, A., Kim, E., & Whitesides, G. M. (1994) · Advanced Materials · doi:10.1002/adma.19940060719 · Cited by 463
Self-citationMicrocontact Printing: Limitations and Achievements
Perl, A., Reinhoudt, D. N., & Huskens, J. (2009) · Advanced Materials · doi:10.1002/adma.200801864 · Cited by 447
Fabrication of Submicrometer Features on Curved Substrates by Microcontact Printing
Jackman, R. J., Wilbur, J. L., & Whitesides, G. M. (1995) · Science · doi:10.1126/science.7624795 · Cited by 434
Self-citationConstraints on Microcontact Printing Imposed by Stamp Deformation
Hui, C. Y., Jagota, A., Lin, Y. Y., & Kramer, E. J. (2002) · Langmuir · doi:10.1021/la0113567 · Cited by 426
Chemical Solution Routes to Single-Crystal Thin Films
Lange, F. F. (1996) · Science · doi:10.1126/science.273.5277.903 · Cited by 423
Nanotribology and nanomechanics of MEMS/NEMS and BioMEMS/BioNEMS materials and devices
Bhushan, B. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2006.10.059 · Cited by 413
Advances in organic field-effect transistors
Sun, Y., Liu, Y., & Zhu, D. (2005) · Journal of Materials Chemistry · doi:10.1039/b411245h · Cited by 412
Recent advances in polymer protected gold nanoparticles: synthesis, properties and applications
Shan, J., & Tenhu, H. (2007) · Chemical Communications · doi:10.1039/b707740h · Cited by 411
Interfacial Chemistries for Nanoscale Transfer Printing
Loo, Y.-L., Willett, R. L., Baldwin, K. W., & Rogers, J. A. (2002) · Journal of the American Chemical Society · doi:10.1021/ja026355v · Cited by 404
Patterned Self-Assembled Monolayers and Meso-Scale Phenomena
Kumar, A., Abbott, N. L., Biebuyck, H. A., Kim, E., & Whitesides, G. M. (1995) · Accounts of Chemical Research · doi:10.1021/ar00053a003 · Cited by 400
Self-citationLithography and Other Patterning Techniques for Future Electronics
Pease, R. F., & Chou, S. Y. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2007.911853 · Cited by 399
Teeth and bones: applications of surface science to dental materials and related biomaterials
Jones, F. (2001) · Surface Science Reports · doi:10.1016/s0167-5729(00)00011-x · Cited by 399
Reactivity of Monolayer-Protected Gold Cluster Molecules: Steric Effects
Templeton, A. C., Hostetler, M. J., Kraft, C. T., & Murray, R. W. (1998) · Journal of the American Chemical Society · doi:10.1021/ja973863+ · Cited by 392
Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 381
Siegel, R. W., Hu, E., Cox, D. M., Goronkin, H., Jelinski, L., Koch, C. C., Mendel, J., Roco, M. C., & Shaw, D. T. (1999) · Springer eBooks · doi:10.1007/978-94-015-9185-0 · Cited by 380
Two-Photon Photopolymerization and 3D Lithographic Microfabrication
Sun, H.-B., & Kawata, S. (2006) · Advances in Polymer Science · doi:10.1007/b94405 · Cited by 380
Bio-Microarray Fabrication Techniques—A Review
Barbulovic-Nad, I., Lucente, M., Sun, Y., Zhang, M., Wheeler, A. R., & Bussmann, M. (2006) · Critical Reviews in Biotechnology · doi:10.1080/07388550600978358 · Cited by 376
Patterning self-assembled monolayers using microcontact printing: A new technology for biosensors?
Mrksich, M., & Whitesides, G. M. (1995) · Trends in Biotechnology · doi:10.1016/s0167-7799(00)88950-7 · Cited by 375
Self-citationPatterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
Imprint lithography with sub-10 nm feature size and high throughput
Chou, S. Y., & Krauss, P. R. (1997) · Microelectronic Engineering · doi:10.1016/s0167-9317(96)00097-4 · Cited by 372
Fabrication of three‐dimensional micro‐structures: Microtransfer molding
Zhao, X., Xia, Y., & Whitesides, G. M. (1996) · Advanced Materials · doi:10.1002/adma.19960081016 · Cited by 361
Self-citationStability of molded polydimethylsiloxane microstructures
Delamarche, E., Schmid, H., Michel, B., & Biebuyck, H. (1997) · Advanced Materials · doi:10.1002/adma.19970090914 · Cited by 360
Functional polymer surfaces for controlling cell behaviors
Chen, L., Yan, C., & Zheng, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.002 · Cited by 358
Biomedical microfluidic devices by using low-cost fabrication techniques: A review
Faustino, V., Catarino, S. O., Lima, R., & Minas, G. (2016) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2015.11.031 · Cited by 338
Patterned Condensation Figures as Optical Diffraction Gratings
Kumar, A., & Whitesides, G. M. (1994) · Science · doi:10.1126/science.263.5143.60 · Cited by 329
Self-citationPrintable organic and polymeric semiconducting materials and devices
Bao, Z., Rogers, J. A., & Katz, H. E. (1999) · Journal of Materials Chemistry · doi:10.1039/a902652e · Cited by 327
Contact Printing of Quantum Dot Light-Emitting Devices
Kim, L., Anikeeva, P. O., Coe-Sullivan, S. A., Steckel, J. S., Bawendi, M. G., & Bulović, V. (2008) · Nano Letters · doi:10.1021/nl8025218 · Cited by 326
Microfabrication and microfluidics for tissue engineering: state of the art and future opportunities
Andersson, H., & Berg, A. V. D. (2004) · Lab on a Chip · doi:10.1039/b314469k · Cited by 307
Moonen, P. F., Yakimets, I., & Huskens, J. (2012) · Advanced Materials · doi:10.1002/adma.201202949 · Cited by 304
Jackman, R. J., Duffy, D. C., Ostuni, E., Willmore, N. D., & Whitesides, G. M. (1998) · Analytical Chemistry · doi:10.1021/ac971295a · Cited by 304
Self-citationMicro- and nanoscale structures for tissue engineering constructs
Desai, T. A. (2000) · Medical Engineering & Physics · doi:10.1016/s1350-4533(00)00087-4 · Cited by 302
Using an elastomeric phase mask for sub-100 nm photolithography in the optical near field
Rogers, J. A., Paul, K. E., Jackman, R. J., & Whitesides, G. M. (1997) · Applied Physics Letters · doi:10.1063/1.118988 · Cited by 297
Self-citationRecent advances in microcontact printing
Quist, A. P., Pavlovic, E., & Oscarsson, S. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2847-z · Cited by 292
Cellular Micropatterns on Biocompatible Materials
Folch, A., & Toner, M. (1998) · Biotechnology Progress · doi:10.1021/bp980037b · Cited by 270
Conformal contact and pattern stability of stamps used for soft lithography
Bietsch, A., & Michel, B. (2000) · Journal of Applied Physics · doi:10.1063/1.1289816 · Cited by 269
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie · doi:10.1002/(sici)1521-3757(19980302)110:5<568::aid-ange568>3.0.co;2-x · Cited by 267
Self-citationvan der Vegte, E. W., & Hadziioannou, G. (1997) · Langmuir · doi:10.1021/la970025k · Cited by 266
Chemical and Biochemical Analysis Using Scanning Force Microscopy
Takano, H., Kenseth, J. R., Wong, S.-S., O'Brie, J. C., & Porter, M. D. (1999) · Chemical Reviews · doi:10.1021/cr9801317 · Cited by 259
Metadata
- Authors
- Kumar, A., & Whitesides, G. M.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 1993-10-04
- Volume
- 63
- Issue
- 14
- Pages
- 2002-2004
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W1994070458
- Cited by
- 1,605
- References
- 2
- FWCI
- 15.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.