Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 399

The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.

Lithography and Other Patterning Techniques for Future Electronics

Pease, R.F., Chou, S.Y.·2008·Proceedings of the IEEE

Abstract

For all technologies, from flint arrowheads to DNA microarrays, patterning the functional material is crucial. For semiconductor integrated circuits (ICs), it is even more critical than for most technologies because enormous benefits accrue to going smaller, notably higher speed and much less energy consumed per computing function. The consensus is that ICs will continue to be manufactured until at least the ldquo22 nm noderdquo (the linewidth of an equal line-space pattern). Most patterning of ICs takes place on the wafer in two steps: (a) lithography, the patterning of a resist film on top of the functional material; and (b) transferring the resist pattern into the functional material, usually by etching. Here we concentrate on lithography. Optics has continued to be the chosen lithographic route despite its continually forecast demise. A combination of 193-nm radiation, immersion optics, and computer-intensive resolution enhancement technology will probably be used for the 45- and 32-nm nodes. Optical lithography usually requires that we first make a mask and then project the mask pattern onto a resist-coated wafer. Making a qualified mask, although originally dismissed as a ldquosupport technology,rdquo now represents a significant fraction of the total cost of patterning an IC largely because of the measures needed to push resolution so far beyond the normal limit of optical resolution. Thus, although optics has demonstrated features well below 22 nm, it is not clear that optics will be the most economical in this range; nanometer-scale mechanical printing is a strong contender, extreme ultraviolet is still the official front runner, and electron beam lithography, which has demonstrated minimum features less than 10 nm wide, continues to be developed both for mask making and for directly writing on the wafer (also known as ldquomaskless lithographyrdquo). Going from laboratory demonstration to manufacturing technology is enormously expensive ( $1 billion) and for good reason. Just in terms of data rate (mask pattern to resist pattern), today's exposure tools achieve about 10 Tb/s at an allowable error rate of about 1/h; this data rate will double with each generation. In addition, the edge placement precision required will soon be 30 parts per billion. There are so many opportunities for unacceptable performance that making the right decision goes far beyond understanding the underlying physical principles. But the benefits of continuing to be able to manufacture electronics at the 22-nm node and beyond appear to justify the investment, and there is no shortage of ideas on how to accomplish this.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/jproc.2007.911853

Cites

29 of 29 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 29 references

Cited by

See all 399

Metadata

Authors
Pease, R. F., & Chou, S. Y.
Venue
Proceedings of the IEEE
Published
2008-02
Volume
96
Issue
2
Pages
248-270
ISSN
  • 0018-9219 (ISSN-L)
  • 1558-2256
OpenAlex
W1991117616
Cited by
399
References
29
FWCI
15.84
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Lithography and Other Patterning Techniques for Future Electronics. https://app.cochat.ai/papers/10.1109/jproc.2007.911853
The paper
Pease, R. F., & Chou, S. Y. (2008). Lithography and Other Patterning Techniques for Future Electronics. Proceedings of the IEEE. https://doi.org/10.1109/jproc.2007.911853

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.