Generation of nanoparticle colloids by picosecond and femtosecond laser ablations in liquid flow
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Fabrication of silver nanoparticle colloids using ultrashort pulse laser ablation in water is studied. Ablation in liquid flow improves the reproducibility and increases the nanoparticle productivity by 380% compared to stationary liquid. Femtosecond laser ablation in water is 20% more efficient than picosecond laser ablation, but due to higher picosecond laser power (higher repetition rate), the nanoparticle productivity at the same pulse fluence is three times higher for picosecond laser ablation. With picosecond laser pulses, the maximum productivity of 8.6μg∕s is achieved at a pulse energy of 110μJ and repetition rate of 50kHz.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The ultrashort femtosecond lasers, on the other hand, trigger non-linear optical absorption, self-focusing, and filamentation effects in the liquid medium as it reaches supercritical peak pulse power, which affects the beam spatial profile and generates energy losses, decreasing the overall productivity.112,114”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [114]
In the citing paper
“For example, experiments on the laser ablation of metal targets in air showed that material removal efficiency is increased as the employed laser pulse width is shorter, 116,117 due to the reduced thermal interaction and more efficient use of the energy for material removal process.114,118,119”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [114]
In the citing paper
“It has been suggested that the use of picosecond lasers is advantageous compared to femtosecond lasers if the generated thermal energy can be redistributed, i.e., by using a liquid flow ablation chamber.114”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [114]
In the citing paper
“The relative motion [117,118], layer height [86,119,120] and physicochemical nature [66,71,121] of the liquid environment influence the productivity in LAL, as explained in the following.”
From Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications (2020) · cites this paper as [117]
In the citing paper
“With this setup, the productivity of femtosecond laser ablation is increased from 0.79 Æ 0.36 mg h À1 (stationary) to 3.0 Æ 0.4 mg h À1 (liquid flow).”
From Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production (2023) · cites this paper as [114]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Formation and Size Control of Silver Nanoparticles by Laser Ablation in Aqueous Solution
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp001336y · Cited by 838
Synthesis of colloidal nanoparticles during femtosecond laser ablation of gold in water
Kabashin, A. V., & Meunier, M. (2003) · Journal of Applied Physics · doi:10.1063/1.1626793 · Cited by 568
Tsuji, T., Iryo, K., Watanabe, N., & Tsuji, M. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00936-4 · Cited by 490
Formation of Stable Platinum Nanoparticles by Laser Ablation in Water
Mafuné, F., Kohno, J.-Y., Takeda, Y., & Kondow, T. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp021580k · Cited by 265
Koch, J., von Bohlen, A., Hergenröder, R., & Niemax, K. (2004) · J. Anal. At. Spectrom. · doi:10.1039/b310512a · Cited by 232
Properties of nanoparticles generated during femtosecond laser machining in air and water
Barcikowski, S., Hahn, A., Kabashin, A. V., & Chichkov, B. N. (2007) · Applied Physics A · doi:10.1007/s00339-006-3852-1 · Cited by 223
Self-citationSemerok, A., Chaléard, C., Detalle, V, Lacour, J.-L., Mauchien, P., Meynadier, P., Nouvellon, C., Sallé, B., Palianov, P., Perdrix, M., et al. (1999) · Applied Surface Science · doi:10.1016/s0169-4332(98)00411-5 · Cited by 218
Nanodisks of Au and Ag produced by laser ablation in liquid environment
Simakin, A. V., Voronov, V. V., Shafeev, G. A., Brayner, R., & Bozon-Verduraz, F. (2001) · Chemical Physics Letters · doi:10.1016/s0009-2614(01)01136-8 · Cited by 209
Nanoparticle generation in ultrafast pulsed laser ablation of nickel
Liu, B., Hu, Z., Che, Y., Chen, Y., & Pan, X. (2007) · Applied Physics Letters · doi:10.1063/1.2434168 · Cited by 101
Femtosecond versus picosecond laser ablation (Keynote Address)
Ostendorf, A., Kamlage, G., Klug, U., Korte, F., & Chichkov, B. N. (2005) · SPIE Proceedings · doi:10.1117/12.597975 · Cited by 27
Self-citation
Research works printed but not linked: 1
- 2006, Encyclopedia of Surface and Colloidal Science, 1932
Cited by
Items 101–200 of 227
Ratti, M., Naddeo, J. J., Tan, Y., Griepenburg, J. C., Tomko, J. A., Trout, C., O’Malley, S. M., Bubb, D. M., & Klein, E. A. (2016) · Applied Physics A · doi:10.1007/s00339-016-9935-8 · Cited by 23
Kalus, M., Lanyumba, R., Barcikowski, S., & Gökce, B. (2021) · Journal of Flow Chemistry · doi:10.1007/s41981-021-00144-7 · Cited by 26
“The production of NPs in semi-batch or batch chambers can be performed with or without stirring the liquid [56].”
BackgroundMethodInfluentialSelf-citationMini-review on laser-induced nanoparticle heating and melting
Baimler, I. V., Simakin, A. V., Dorokhov, A. S., & Gudkov, S. V. (2024) · Frontiers in Chemistry · doi:10.3389/fchem.2024.1463612 · Cited by 24
Blue and green luminescence from layered zinc hydroxide/dodecyl sulfate hybrid nanosheets
Liang, C., Tian, Z., Tsuruoka, T., Cai, W., & Koshizaki, N. (2011) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2011.09.013 · Cited by 22
A simple strategy for enhanced production of nanoparticles by laser ablation in liquids
Monsa, Y., Gal, G., Lerner, N., & Bar, I. (2020) · Nanotechnology · doi:10.1088/1361-6528/ab78ac · Cited by 21
Nastulyavichus, A., Kudryashov, S. I., Emelyanenko, A. M., & Boinovich, L. B. (2023) · Colloid Journal · doi:10.1134/s1061933x23600136 · Cited by 22
“Gold is a convenient model material for studying the processes and parameters, as well as the productivity, of laser dispersion in liquids; therefore, it has been repeatedly applied for these purposes using water as a dispersion medium [60, 73, 88, 89].”
MethodMuttaqin, M., Nakamura, T., & Sato, S. (2015) · Applied Physics A · doi:10.1007/s00339-015-9314-x · Cited by 22
Lasemi, N., Rentenberger, C., Liedl, G., & Eder, D. (2020) · Nanoscale Advances · doi:10.1039/d0na00317d · Cited by 20
Resano-Garcia, A., Champmartin, S., Battie, Y., Koch, A., En Naciri, A., Ambari, A., & Chaoui, N. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06511b · Cited by 20
X-ray spectroscopic and stroboscopic analysis of pulsed-laser ablation of Zn and its oxidation
Reich, S., Göttlicher, J., Letzel, A., Gökce, B., Barcikowski, S., Rolo, T. D. S., Baumbach, T., & Plech, A. (2017) · Applied Physics A · doi:10.1007/s00339-017-1503-3 · Cited by 22
Self-citationAhmed, A. M., Halim, M. M., Ahmed, N. M., Rashid, M., & Taha, B. A. (2025) · physica status solidi (a) · doi:10.1002/pssa.202500382 · Cited by 20
Danilov, P. A., Ionin, A. A., Kudryashov, S. I., Rudenko, A. A., Saraeva, I. N., & Zayarny, D. A. (2017) · Laser Physics Letters · doi:10.1088/1612-202x/aa6225 · Cited by 19
Osipov, V. V., Platonov, V. V., Lisenkov, V. V., Tikhonov, E. V., & Podkin, A. V. (2017) · Applied Physics A · doi:10.1007/s00339-017-1348-9 · Cited by 19
Sakaki, S., Saitow, K., Sakamoto, M., Wada, H., Światkowska-Warkocka, Ż., Ishikawa, Y., & Koshizaki, N. (2018) · Applied Physics Express · doi:10.7567/apex.11.035001 · Cited by 19
Ablation target cooling by maximizing the nanoparticle productivity in laser synthesis of colloids
Waag, F., Gökce, B., & Barcikowski, S. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.030 · Cited by 19
Self-citationAli, H. S., Fakhri, M. A., & Khalifa, Z. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1795/1/012065 · Cited by 20
Laser Ablation in Liquids for Nanomaterial Synthesis and Applications
Zhang, D., & Wada, H. (2021) · Springer eBooks · doi:10.1007/978-3-030-63647-0_30 · Cited by 21
Scholz, T., Dickmann, K., Ostendorf, A., Uphoff, H., & Michalewicz, M. (2015) · Journal of Laser Applications · doi:10.2351/1.4916081 · Cited by 20
Ultrasmall Silver Nanopores Fabricated by Femtosecond Laser Pulses
Bian, F., Tian, Y., Wang, R., Yang, H., Xu, H., Meng, S., & Zhao, J. (2011) · Nano Letters · doi:10.1021/nl201529d · Cited by 19
Laser-induced agglomeration of gold nanoparticles dispersed in a liquid
Серков, А. А., Shcherbina, M. E., Kuzmin, P. G., & Кириченко, Н. А. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.09.173 · Cited by 19
Travelet, C., Stemmelen, M., Lapinte, V., Dubreuil, F., Robin, J., & Borsali, R. (2013) · Journal of Nanoparticle Research · doi:10.1007/s11051-013-1626-1 · Cited by 21
Picosecond Laser Fabrication of Functional Gold–Antibody Nanoconjugates for Biomedical Applications
Barchanski, A., Funk, D., Wittich, O., Tegenkamp, C., Chichkov, B. N., & Sajti, C. L. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp511162n · Cited by 18
Self-citationHafnium oxide nanoparticles fabricated by femtosecond laser ablation in water
Dhanunjaya, M., Byram, C., Vendamani, V. S., Rao, S. V., Pathak, A. P., & Rao, S. V. S. N. (2019) · Applied Physics A · doi:10.1007/s00339-018-2366-y · Cited by 18
Núñez, P. D., Izquierdo, J. G., González‐Rubio, G., Guerrero‐Martínez, A., Rivera, A., Perlado, J. M., Bañares, L., & Peña-Rodríguez, O. (2017) · Applied Sciences · doi:10.3390/app7080793 · Cited by 18
Multi-pulse laser-induced bubble formation and nanoparticle aggregation using MoS2 nanoparticles
Ko, B. A., Lü, W., Sokolov, A. V., Lee, H. W. H., Scully, M. O., & Zhang, Z. (2020) · Scientific Reports · doi:10.1038/s41598-020-72689-x · Cited by 17
Doñate-Buendia, C., Spellauge, M., Streubel, R., Riahi, F., Barcikowski, S., Huber, H. P., & Gökce, B. (2023) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/acbaaa · Cited by 16
Self-citationReview of ultrafast laser ablation for sensing and photonic applications
Byram, C., Moram, S. S. B., Banerjee, D., Beeram, R., Rathod, J., & Rao, S. V. (2023) · Journal of Optics · doi:10.1088/2040-8986/acbc31 · Cited by 17
“Barcikowski and co-workers have recently demonstrated the ablation efficacy (for obtaining Ag NPs) in the stationary and flowing liquid ablation setup using fs and ps pulses of an Ag strip [64].”
Domínguez-Crespo, M. A., Rodríguez, E., Torres-Huerta, A. M., Soní-Castro, I. J., Brachetti-Sibaja, S. B., Narro-García, R., & López-Oyama, A. B. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.05.274 · Cited by 15
Bonilla, J. S. G., Düsenberg, B., Lanyi, F. J., Schmuki, P., Schubert, D. W., Schmidt, J., Peukert, W., & Bück, A. (2021) · Plasma Processes and Polymers · doi:10.1002/ppap.202000247 · Cited by 15
Li, X., Zhang, G., Jiang, L., Shi, X., Zhang, K., Rong, W., Duan, J., & Lu, Y. (2015) · Optics Express · doi:10.1364/oe.23.004226 · Cited by 14
Al-Nori, T. M. (2012) · Al-Mustansiriyah Journal of Sciences · Cited by 14
Gemini, L., Hupfeld, T., Kling, R., Barcikowski, S., & Gökce, B. (2017) · ChemPhysChem · doi:10.1002/cphc.201601266 · Cited by 13
Self-citationGeneration of NiTi Nanoparticles by Femtosecond Laser Ablation in Liquid
Chakif, M., Essaidi, A., Gurevich, E. L., Ostendorf, A., Prymak, O., & Epple, M. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-1007-7 · Cited by 15
Nastulyavichus, A., Smirnov, N., & Kudryashov, S. (2022) · Chinese Physics B · doi:10.1088/1674-1056/ac5602 · Cited by 12
Petersen, S., Soller, J. T., Wagner, S., Richter, A., Bullerdiek, J., Nolte, I. J. A., Barcikowski, S., & Escobar, H. M. (2009) · Journal of Nanobiotechnology · doi:10.1186/1477-3155-7-6 · Cited by 13
Self-citationActively Q-switched Tb:LiYF4 green lasers
Chen, H., Yao, W., Uehara, H., & Yasuhara, R. (2021) · Applied Physics Express · doi:10.35848/1882-0786/abfeb4 · Cited by 12
IR and UV irradiations on ion bombarded polycrystalline silver
Latif, A., Khaleeq-ur-Rahman, M., Bhatti, K. A., Rafique, M., & Rizvi, Z. H. (2010) · Physica B Condensed Matter · doi:10.1016/j.physb.2010.07.019 · Cited by 12
Single-step printing of metallic nanoparticles in 2D micropatterns
Ferreira, P. R., Correr, W., Mendonça, C. R., & Almeida, J. M. P. (2020) · Journal of Nanoparticle Research · doi:10.1007/s11051-020-04995-4 · Cited by 12
“Typically, a pulsed laser is employed to ablate a metal target, placed into a transparent liquid for near-infrared radiation, making possible the in situ dispersion of nanoparticles in organic solvents (Barcikowski et al. 2007).”
BackgroundNanoparticles by Laser Ablation of Bulk Target Materials in Liquids
Semaltianos, N. G. (2015) · Springer eBooks · doi:10.1007/978-3-319-15338-4_1 · Cited by 18
Xu, L., Tao, J., Li, T., Kong, Y., Guo, H., Li, Z., & Zhang, D. (2025) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2025.04.053 · Cited by 11
Effect of Laser Pulse Energy on the Characteristics of Au Nanoparticles and Applications in medicine
(2017) · Iraqi Journal of Science · doi:10.24996/ijs.2017.58.4c.12 · Cited by 11
“Introductin Laser ablation of target submerged in liquid environment which is simple method, recently has attracted much attention for NPs creation [1, 2] The unique physical properties of Nano scale materials have shown to have abilities to develop wide array methods for cost-effective diagnosis, fast determination o…”
BackgroundTian, X., Guan, X., Luo, N., Yang, F., Chen, D., Ye, P., Zhu, J., He, F., Li, L., & Chen, X. (2014) · Journal of Nanoparticle Research · doi:10.1007/s11051-014-2594-9 · Cited by 11
“The main reason is that nanoprobes are prepared in deionized water with no chemical reagents, which effectively reduces the toxicity that originates from the reagent (Barcikowski et al. 2007; Yang 2012, 2007; Xiao et al. 2013).”
BackgroundMetal oxide hollow nanoparticles formation by a single nanosecond pulsed laser ablation in liquid
Zhang, T., Wang, Z., & Hwang, D. J. (2017) · Applied Physics A · doi:10.1007/s00339-017-1222-9 · Cited by 10
Characterization of Aggregates and Particles Using Emerging Techniques
Zhao, H., Diez, M., Koulov, A. V., Bozova, M., Bluemel, M., & Forrer, K. (2012) · Wiley eBooks · doi:10.1002/9781118150573.ch7 · Cited by 10
Li, T., Tang, R., Xu, L., Tao, J., Guo, H., Li, Z., & Zhang, D. (2025) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.4c04851 · Cited by 10
Nyabadza, A., McCarthy, É., Makhesana, M. A., Heidarinassab, S., Azoulay-Younes, L., O’Toole, K., Vázquez, M., & Brabazon, D. (2025) · International Journal of Thermofluids · doi:10.1016/j.ijft.2025.101163 · Cited by 9
Premnath, M., Muruganandhan, R., & Abeens, M. (2022) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/ac59d3 · Cited by 9
Optimization of Biogenic Synthesis of Colloidal Metal Nanoparticles
Moholkar, D. N., Havaldar, D. V., Potadar, R. S., & Pawar, K. D. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.94853 · Cited by 9
Laser-Driven Silver Nanowire Formation: Effect of Femtosecond Laser Pulse Polarization
Fei, B., Rui, W., Huai-Xin, Y., Xin-Zheng, Z., Li, J., Xu, H., Xu, J., & Zhao, J. (2010) · Chinese Physics Letters · doi:10.1088/0256-307x/27/8/088101 · Cited by 9
Pustovalov, V. K., & Astafyeva, L. G. (2013) · Laser Physics · doi:10.1088/1054-660x/23/6/065901 · Cited by 9
Abbas, S. A. R. (2011) · International Journal of Chemistry · doi:10.5539/ijc.v3n4p61 · Cited by 9
Laser Fabrication of Nanoparticles
Caricato, A. P., Luches, A., & Martino, M. (2015) · Springer eBooks · doi:10.1007/978-3-319-13188-7_21-1 · Cited by 10
Nanomaterials: Laser‐Based Processing in Liquid Media
Singh, S. C., Zeng, H., Yang, S., Cai, W., Hong, M., Chen, G., & Chong, T. C. (2012) · Wiley eBooks · doi:10.1002/9783527646821.ch6 · Cited by 11
Reutova, O. A., Fakhrutdinova, E. D., Goncharova, D. A., Стадниченко, А. И., Stonkus, O. A., Kharlamova, T., Светличный, В. А., & Vodyankina, O. V. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c03268 · Cited by 9
Formation of bimetallic nanoparticles by pulsed laser ablation of multicomponent thin films in water
Nikov, R., Nedyalkov, N., Nikolov, A. S., Atanasov, P. A., Alexandrov, M. T., & Karashanova, D. B. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2175638 · Cited by 9
Electric discharge synthesis of nickel nanoparticles with virtual instrument control
Ramos, R., Valdez, B. S., Nedev, N., Curiel, M., Perez-Landeros, O. M., & Salvador, J. (2021) · Instrumentation Science & Technology · doi:10.1080/10739149.2021.1888115 · Cited by 7
“The STEM results show that the particle sizes are smaller than obtained from Brownian motion of nanoparticles.([12]) Gold, silver, aluminum and iron nanoparticles have been reported depending on the discharge system and the electric arc parameters with dimensions from 15 to 30 nm,([23]) 5 to 35 nm,([13]) 50 to 130 nm,…”
BackgroundMethodNanoparticles by Laser Ablation of Bulk Target Materials in Liquids
Semaltianos, N. G. (2015) · Springer eBooks · doi:10.1007/978-3-319-13188-7_1-1 · Cited by 7
Schnoor, A., Petersen, S., & Barcikowski, S. (2010) · Chemie Ingenieur Technik · doi:10.1002/cite.200900099 · Cited by 9
Self-citationMorphology and structure of particles produced by femtosecond laser ablation of fused silica
Sharma, S. P., Oliveira, V., & Vilar, R. (2016) · Applied Physics A · doi:10.1007/s00339-016-9859-3 · Cited by 7
Popović, D. M., Kushima, A., Bogdanovic, M. I., Chai, J. S., Kasalica, B. V., Trtica, M. S., Stašić, J., & Žekić, A. (2017) · Journal of Applied Physics · doi:10.1063/1.4990040 · Cited by 7
Cesaria, M., Caricato, A. P., Beccaria, M., Perrone, A., Martino, M., Taurino, A., Catalano, M., Resta, V., Klini, A., & Gontad, F. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.022 · Cited by 8
Non-spherical aluminum nanoparticles fabricated using picosecond laser ablation
Swamulu, A. B., Rao, S. V., & Podagatlapalli, G. K. (2020) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-020-2032-1 · Cited by 8
Zikang, 苏. S., Shilong, 袁. Y., Xianglong, 李. L., & Xueqiang, 张. Z. (2024) · Chinese Journal of Lasers · doi:10.3788/cjl231301 · Cited by 6
Garjasi, M., Dorranian, D., Anaraki, P. A., & Hasanzadeh, J. (2024) · Optics & Laser Technology · doi:10.1016/j.optlastec.2024.111364 · Cited by 6
Antipov, A. A., Arakelyan, S. M., Бухаров, Д. Н., Itina, T., Kutrovskaya, S., Kucherik, A. O., & Ногтев, Д. С. (2016) · Bulletin of the Russian Academy of Sciences Physics · doi:10.3103/s1062873816040031 · Cited by 7
Nastulyavichus, A., Kudryashov, S. I., Ионин, А. А., Yushina, Y. K., Semenova, A., & Gonchukov, S. A. (2022) · Laser Physics Letters · doi:10.1088/1612-202x/ac642e · Cited by 6
Pulsed Laser Ablation in Liquids for Fabrication of Noble Metal Nanostructures
Lazăr, O. A., Nikolov, A. S., Moise, C. C., & Enăchescu, M. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.111550 · Cited by 8
Time-resolved probing of laser-induced nanostructuring processes in liquids
Spellauge, M., Redka, D. S., Mo, M., Song, C., Huber, H. P., & Plech, A. (2025) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.16.74 · Cited by 9
Embedded silver nanoparticle multilayers fabricated by femtosecond pulsed laser deposition
Peña-Rodríguez, O., Izquierdo, J. G., Rivera, A., Balabanian, G., Olivares, J., Perlado, J. M., & Bañares, L. (2014) · Optical Materials Express · doi:10.1364/ome.4.001943 · Cited by 5
Shabanlou, E., Jaleh, B., Imantalab, O., & Fattah‐alhosseini, A. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.004 · Cited by 5
Kurilova, U. E., Chernikov, A. S., Kochuev, D. A., Volkova, L. S., Voznesenskaya, A. A., Chkalov, R. V., Abramov, D. V., Kazak, A. V., Суетина, И. А., Mezentseva, M. V., et al. (2023) · Journal of Biomedical Photonics & Engineering · doi:10.18287/jbpe23.09.020301 · Cited by 5
“[14], the authors note a 20% performance advantage under the ablation effect of femtosecond laser pulses.”
BackgroundStudy on the structure and luminescence properties of the coordinated ZnO crystallites
Chen, Q., Liu, Q. L., Li, Q., Sheng, Y., & Wen-gong, Z. (2012) · Applied Physics A · doi:10.1007/s00339-012-7500-7 · Cited by 4
Vadillo, V., Gutiérrez, J., Insausti, M., Garitaonandia, J. S., de Muro, I. G., Quintana, I., & Barandiaran, J. M. (2019) · IEEE Magnetics Letters · doi:10.1109/lmag.2019.2934076 · Cited by 4
Ultrafast laser ablation of silver targets in miscible and immiscible liquid mixtures
Avasarala, R., Rao, S. V., & Podagatlapalli, G. K. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.04.565 · Cited by 5
Suliman, E., Nayef, U. M., & Mutlak, F. A.-H. (2022) · Journal of Applied Sciences and Nanotechnology · doi:10.53293/jasn.2022.4558.1125 · Cited by 4
Comparative Analysis of the Silver Nanoparticle’s Yield for Pico-Femto-Nanosecond Laser Generation
Nastulyavichus, A., Kudryashov, S. I., & Ионин, А. А. (2023) · Micromachines · doi:10.3390/mi14061220 · Cited by 4
“According to the work [17], femtosecond laser ablation in water is 20% more efficient than picosecond laser ablation, but due to higher picosecond laser power, the nanoparticle productivity at the same pulse fluence is three times higher for picosecond laser ablation.”
BackgroundDynamical behavior of laser-induced nanoparticles during remote processing
Scholz, T., Dickmann, K., & Ostendorf, A. (2014) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2035197 · Cited by 5
“Hence many research projects are concentrated on the synthesis of nanoparticles using short and ultrashort pulsed laser systems [9-11].”
BackgroundAdding functionality to metal nanoparticles during femtosecond laser ablation in liquids
Barcikowski, S., Jakobi, J., Petersen, S., Hahn, A., Bärsch, N., & Chichkov, B. N. (2007) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5061179 · Cited by 4
Self-citationShanon, Z. S., & Al-Helaly, M. T. (2025) · Plasmonics · doi:10.1007/s11468-025-03086-1 · Cited by 3
Zhang, F., Shang, L., Zhang, Z., Cheng, Y., Liu, H., & Du, X. (2026) · Small Methods · doi:10.1002/smtd.202502275 · Cited by 3
Zhang, H., Qi, X., Liu, C., Chen, X., Teng, C., Luo, Y., Wang, C., Jiang, H., Cui, H., & Dong, J. (2023) · Nanomaterials · doi:10.3390/nano13152201 · Cited by 3
“Stirring a flow liquid has been found to assist in removing generated bubbles and particles compared with a static liquid, thereby improving production [15].”
BackgroundYaqubi, A. K., Zaidan, A. H., & Astuti, S. D. (2024) · Jurnal Teknologi · doi:10.11113/jurnalteknologi.v86.21434 · Cited by 4
“Several researchers have employed laser ablation in liquids rather regularly to create silver nanoparticles [37,38,39,40,41,42].”
Ryabchikov, Y. V., Kaňa, A., & Mirza, I. (2025) · Crystals · doi:10.3390/cryst15020132 · Cited by 5
Podagatlapalli, G. K. (2025) · Plasmonics · doi:10.1007/s11468-025-02920-w · Cited by 4
“To eliminate the difficulties that arise in the case of laser ablation of targets in ambient air, ultrafast laser ablation of metals submerged in liquid (LAL) is introduced [103–112].”
Baranov, M. S., Khramov, V. N., Анатольевич, Л. А., & Khaydukov, E. V. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2267927 · Cited by 3
Pulsed laser ablation in liquid (PLAL) for nanoparticle generation
Freeland, B. H., McCarthy, É., Sreenilayam, S. P., Foley, G., & Brabazon, D. (2021) · Institute of Physics eBooks · doi:10.1088/978-0-7503-1683-5ch8 · Cited by 5
Nastulyavichus, A., Kudryashov, S. I., Emelyanenko, A. M., & Boinovich, L. B. (2023) · Коллоидный журнал · doi:10.31857/s0023291223600037 · Cited by 3
Gemini, L., Hernandez, M.-C., & Kling, R. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2211084 · Cited by 3
“s on the targe ticularly at h d to the tar cess ([26]).”
BackgroundYou shall not pass: Ti nanospike-based sterilizer in fluid flow reactor
Saraeva, I. N., Ромеовна, Т. Э., Sozaev, I. V., Nastulyavichus, A. A., Kudryashov, S. I., Rudenko, A. A., Ионин, А. А., & Gonchukov, S. A. (2021) · Laser Physics Letters · doi:10.1088/1612-202x/abdece · Cited by 3
“Thus, NPs were rapidly formed (after several seconds) during fast and highly efficient nanosecond laser ablation [26, 27], whereas fabrication of colloidal solutions with high concentration with the use of a femtosecond laser with microjoule energy would take several minutes [15, 28].”
Eremenko, A. M., Petryk, I. S., Mukha, Y. P., Vityuk, N. V., Смирнова, Н. П., & Руденко, А. В. (2021) · Himia Fizika ta Tehnologia Poverhni · doi:10.15407/hftp12.04.326 · Cited by 3
Alharbi, A. M., Azhar, A. R., Ahmed, N. M., Azman, N. Z. N., Almessiere, M. A., & Mahmood, M. S. (2024) · International Journal of Modern Physics B · doi:10.1142/s021797922530004x · Cited by 4
The spatial detection on distribution of metal nano-particles during femtosecond laser ablation
Li, N., Ni, X., Hong, R., Donnelly, T., Wang, X., Amoruso, S., & Wang, C. (2009) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.835964 · Cited by 2
“Furthermore, in order to promote the fs PLD method to further application in science, the distribution of electrons, ions, neutrals and Nps involved in fs laser ablation are still attracting scientific interest([9-11]).”
MethodLaser Ablation in Liquids for Nanomaterial Synthesis and Applications
Zhang, D., & Wada, H. (2021) · Springer eBooks · doi:10.1007/978-3-319-69537-2_30-1 · Cited by 4
Laser Fabrication of Nanoparticles
Caricato, A. P., Luches, A., & Martino, M. (2015) · Springer eBooks · doi:10.1007/978-3-319-15338-4_21 · Cited by 8
Bi, J., & Qi, X. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.132671 · Cited by 2
Further Sustainable and/or Unconventional Low-temperature Wet-chemical Synthetic Methods
Barbon, F., Tajoli, F., Spolaore, F., & Gross, S. (2024) · Royal Society of Chemistry eBooks · doi:10.1039/9781839165757-00315 · Cited by 1
Takashima, Y., Ohgushi, M., & Nakamura, T. (2026) · Applied Surface Science · doi:10.1016/j.apsusc.2026.166906 · Cited by 1
Laser ablation as a tool for fragmentation of active pharmaceutical ingredient particles: overview
Hopp, B., Gera, T., Nagy, E. M., Kopniczky, J., Homik, Z., Smausz, T., Bohus, J., Ajtai, T., Szabó‐Révész, P., Motzwickler-Németh, A., et al. (2025) · Applied Physics A · doi:10.1007/s00339-025-08378-1 · Cited by 1
“Once the active Laser ablation can be used both as a particle generation tool and as a surface machining tool [16 ].”
Nikolov, A. S., Nikov, R., Nedyalkov, N., Koutzarova, Т., Alexandrov, M. T., Karashanova, D. B., Ristoscu, C., & Mihailescu, I. N. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2175651 · Cited by 1
Laser-Based Growth of Nanostructured Thin Films
Patsalas, P. A. (2011) · Nanoscience and technology · doi:10.1007/978-3-642-22227-6_4 · Cited by 1
Metadata
- Authors
- Barcikowski, S., Menéndez-Manjón, A., Chichkov, B., Brikas, M., & Račiukaitis, G.
- Affiliations
- Laser Zentrum Hannover (DE)
- Ekspla (Lithuania) (LT)
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2007-08-20
- Volume
- 91
- Issue
- 8
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2061994663
- Cited by
- 225
- References
- 10
- Citations by year
- 2026: 5 · 2025: 12 · 2024: 9 · 2023: 12 · 2022: 11 · 2021: 14 · 2020: 19 · 2019: 8 · 2018: 7 · 2017: 23 · 2016: 14 · 2015: 18 · 2014: 11 · 2013: 9 · 2012: 16
- FWCI
- 6.46
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/3.0/ (vor, 3 d)
- creativecommons.org/licenses/by/3.0/ (tdm, 3 d)
- Locations
- Applied Physics Letters (publishedVersion, cc-by)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Laser-Matter Interactions and Applications
- Keywords
- laser ablation in liquid, colloidal nanoparticles, silver nanoparticles, femtosecond pulses, picosecond pulses, laser repetition rate, laser pulse energy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.