Understanding the switching-off mechanism in Ag+ migration based resistively switching model systems
Open accessThe DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
Different coplanar Pt∕Ag structures were prepared by photolithography on SiO2 substrates, and Pt∕H2O∕Ag cells were formed by adding de-ionized H2O to the coplanar Pt∕Ag structures. The Pt∕H2O∕Ag cell is utilized here as a model system, due to the feasibility of visual inspection of the switching process. Bipolar switching was achieved for the cell. Scanning electron microscopy (SEM) investigations demonstrated that the growth and dissolution of Ag dendrites are responsible for the resistive switching. The Ag dendrite morphology is proposed to be the origin of the asymmetrical dissolution during the switching-off process, hence the bipolar nature of the switching characteristics.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“the geometry of the filament is of fundamental importance in the operation of resistive memories because, during erasing/programming, the dissolution and recreation of the filaments are expected to occur at the thinnest part of the filament 23 .”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [23]
In the citing paper
“For ECM memories, this has been argued to be near the active electrode interface 23 , contrary to the findings here showing that the thinnest regions of the filaments are near the inert electrode interface instead”
From Observation of conducting filament growth in nanoscale resistive memories (2012) · cites this paper as [23]
Citations
Cites
Switching the electrical resistance of individual dislocations in single-crystalline SrTiO3
Szot, K., Speier, W., Bihlmayer, G., & Waser, R. (2006) · Nature Materials · doi:10.1038/nmat1614 · Cited by 1,651
Self-citationQuantized conductance atomic switch
Terabe, K., Hasegawa, T., Nakayama, T., & Aono, M. (2005) · Nature · doi:10.1038/nature03190 · Cited by 1,208
Reproducible switching effect in thin oxide films for memory applications
Beck, A., Bednorz, J. G., Gerber, C., Rossel, C., & Widmer, D. (2000) · Applied Physics Letters · doi:10.1063/1.126902 · Cited by 1,122
Nanoscale Memory Elements Based on Solid-State Electrolytes
Kozicki, M. N., Park, M., & Mitkova, M. (2005) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2005.846936 · Cited by 540
Watanabe, Y., Bednorz, J. G., Bietsch, A., Gerber, C., Widmer, D., Beck, A., & Wind, S. J. (2001) · Applied Physics Letters · doi:10.1063/1.1377617 · Cited by 522
Field-driven hysteretic and reversible resistive switch at the Ag–Pr0.7Ca0.3MnO3 interface
Baikalov, A., Wang, Y. Q., Shen, B., Lorenz, B., Tsui, S., Sun, Y. Y., Xue, Y. Y., & Chu, C. W. (2003) · Applied Physics Letters · doi:10.1063/1.1590741 · Cited by 404
Field-induced resistive switching in metal-oxide interfaces
Tsui, S., Baikalov, A., Cmaidalka, J., Sun, Y. Y., Wang, Y. Q., Xue, Y. Y., Chu, C. W., Chen, L., & Jacobson, A. J. (2004) · Applied Physics Letters · doi:10.1063/1.1768305 · Cited by 250
Ti O 2 anatase nanolayer on TiN thin film exhibiting high-speed bipolar resistive switching
Fujimoto, M., Koyama, H., Konagai, M., Hosoi, Y., Ishihara, K., Ohnishi, S., & Awaya, N. (2006) · Applied Physics Letters · doi:10.1063/1.2397006 · Cited by 221
A nonvolatile programmable solid-electrolyte nanometer switch
Kaeriyama, S., Sakamoto, T., Sunamura, H., Mizuno, M., Kawaura, H., Hasegawa, T., Terabe, K., Nakayama, T., & Aono, M. (2005) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2004.837244 · Cited by 217
Reproducible hysteresis and resistive switching in metal-CuxO-metal heterostructures
Dong, R., Lee, D. S., Xiang, W. F., Oh, S. J., Seong, D. J., Heo, S. H., Choi, H. J., Kwon, M. J., Seo, S. N., Pyun, M. B., et al. (2007) · Applied Physics Letters · doi:10.1063/1.2436720 · Cited by 185
Cited by
Items 201–248 of 248
A HRTEM Study of Resistive Switching Behaviour in SiO2 Thin Films by Sol-Gel Process
Li, Y., Zhao, G. Y., Zhou, X. F., Pan, L. N., & Ren, Y. (2011) · Materials science forum · doi:10.4028/www.scientific.net/msf.687.1 · Cited by 2
Resistive switching in the devices of Ag/amorphous Ag30Ge17Se53 films/Pt
Chen, L., Guo, H., Xia, Y., Yin, J., & Liu, Z. G. (2010) · Applied Physics A · doi:10.1007/s00339-010-5795-9 · Cited by 2
Park, S.-G., Magyari‐Köpe, B., & Nishi, Y. (2009) · MRS Proceedings · doi:10.1557/proc-1160-h11-11 · Cited by 2
Zhao, J. W., Dong, J., Ren, S., Zhang, L., Zhao, X., & Chen, W. (2014) · Chinese Physics B · doi:10.1088/1674-1056/23/12/127301 · Cited by 2
Enhancement of CBRAM performance by controlled formation of a hourglass-shaped filament
Belmonte, A., Goux, L., Woo, J., Celano, U., Redolfi, A., Clima, S., & Kar, G. S. (2017) · Non-Volatile Memory Technology Symposium · doi:10.1109/nvmts.2017.8171281 · Cited by 3
An atomic switch using oxygenated amorphous carbon as solid electrolyte
Xu, H., Wang, Q., Ma, Y., Dang, H., Guo, P., Yang, H., & He, D. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aaf265 · Cited by 2
Nanogap resistive switch mechanism study and performance degradation analysis
Yu, D., Tian, Z., Ren, L., & Fu, Y. (2024) · Applied Physics Letters · doi:10.1063/5.0216864 · Cited by 1
Bioactive Ion‐Confined Ultracapacitive Memristors with Neuromorphic Functions
Li, P., Feder‐Kubis, J., Kunigkeit, J., Zielińska‐Błajet, M., Brunner, E., Grothe, J., & Kaskel, S. (2024) · Angewandte Chemie · doi:10.1002/ange.202412674 · Cited by 1
Liquid Resistive Switching Devices with Printable Electrodes
Nguyen, V. C. (2025) · Micromachines · doi:10.3390/mi16080863 · Cited by 1
“The “set” process is observed at negative voltage, while “reset” is at the positive one, which is consistent with the theory of electrochemical metallization [30].”
InfluentialLi, Y., Zhao, G., Zhou, X., Pan, L., & Ren, Y. (2011) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2011.07.001 · Cited by 1
Research on Memristor Oriented to Resistive RAM
Huang, D., & Tang, Y. H. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.427-429.974 · Cited by 1
Advanced methodologies for atomic-scale nanofabrication and dynamic characterization
Wu, X. Y., & Sun, L. (2013) · IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) · doi:10.1109/ipfa.2013.6599188 · Cited by 1
Influences of dislocation distribution on the resistive switching effect of Ag-SiO2 thin films
Zhang, P., Meng, Y., Ziyu, L., Pan, X., Liang, X., Dong-Min, C., & Hong-Wu, Z. (2012) · Acta Physica Sinica · doi:10.7498/aps.61.107703 · Cited by 1
Quantum Dot Interfaces for Memristor
Shaikh, S., Mulla, R., Kalasad, M. N., & Rabinal, M. K. (2020) · Lecture notes in nanoscale science and technology · doi:10.1007/978-3-030-35813-6_9 · Cited by 1
Zeng, Q., Qin, J., Chen, X., & Hou, X. Y. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.11.004 · Cited by 1
Xia, P., Li, L., Wang, P., Gan, Y., & Xu, W. (2017) · AIP Advances · doi:10.1063/1.5000420 · Cited by 1
Resistive Random Access Memory Device Physics and Array Architectures
Zhuo, V. Y.-Q., Chen, Z., & Chui, K. J. (2021) · Springer eBooks · doi:10.1007/978-981-15-6912-8_10 · Cited by 3
Fabrication and characterization of memory devices based on nanoparticles
Kiazadeh, A. (2013) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 1
Simulation Models for Programmable Metallization Cells
Oleksy, D. (2013) · Arizona State University Library Digital Repository (Arizona State University) · Cited by 1
Kalaga, P. S. (2021) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/160030 · Cited by 1
Властивості матеріалів для резистивної пам’яті з довільним доступом
Zalevskyi, D. V. (2023) · doi:10.31812/123456789/7070 · Cited by 1
The unveiling switching mechanism of oxide electrolyte based ReRAM
Liu, M., Lv, H., Liu, Q., Li, Y., Li, L., Long, S., Sun, H., Yang, X., Wang, M., Xie, H., et al. (2012) · IEEE International Conference on Solid-State and Integrated Circuit Technology · doi:10.1109/icsict.2012.6467647
Simulation of resistance switching of memory cells based on solid electrolyte
Liang, X.-L., Kong, X., Zhang, S. T., & Yang, W. (2010) · Solid State Communications · doi:10.1016/j.ssc.2010.11.001
Characterizations and understanding of conducting filaments in resistive switching devices
Yang, Y., & Lu, W. D. (2015) · IEEE International Conference on Nanotechnology (IEEE-NANO) · doi:10.1109/nano.2015.7388841
“Among them, scanning electron microscopy (SEM) was used to visualize some large-scale filaments without stringent sample preparation procedure.(12) For instance, in a recent study by the authors a forward cone shaped Cu filament was observed in Ta2O5 (Fig.”
MethodThree-Dimensional Filament Observation
Celano, U. (2016) · Springer theses · doi:10.1007/978-3-319-39531-9_5
Wang, Z. (2014) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/61763
Multi-level switching in TiO x F y film with nanoparticles
Sun, X., Wu, C., Shuai, Y., Pan, X., Luo, W., You, T., Du, N., & Schmidt, H. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa7fae
Zhou, Y. (2017) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/72747
Research on emergent physical properties of integrated nanomaterials
リ, チ., & Li, Q. (2020)
SiO2-Based Conductive-Bridging Random Access Memory
Chen, W., Tappertzhofen, S., Barnaby, H., & Kozicki, M. N. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_7
Improvement of Resist Ive Switching In Δ-Cspbi 3 Devices by Inserting Carbon NanotubePreprint
Yang, X., Ye, Z., Zhang, R., Wang, K., Wei, H., Li, W., & cui, Y. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4096074
Yang, Y., Takahashi, Y., Tsurumaki‐Fukuchi, A., 有田正志, Moors, M., Buckwell, M., Mehonić, A., & Kenyon, A. J. (2021) · Kluwer international series in electronic materials: science and technology · doi:10.1007/978-3-030-42424-4_5
Design and modeling of nonvolatile memories by resistive switching elements
Junsangsri (2017) · Digital Repository Service (Northeastern University) · doi:10.17760/d20263256
“ For the reset process, a negative voltage bias occurs across the PMC (Figure 46b); the CF tends to laterally dissolve, because the enhanced lateral electric field is at the top of the CF [63].”
BackgroundImprovement of resistive switching in δ-CsPbI3 devices by inserting carbon nanotube
Yang, X., Ye, Z., Wang, K., Zhang, R., Wei, H., & Cui, Y. (2023) · Physica Scripta · doi:10.1088/1402-4896/acbbb0
Zhang, B., Gu, B., Janíček, P., Rodríguez‐Pereira, J., Šlang, S., & Wagner, T. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4661325
Yang, B., Ma, G., Wan, X., Rao, Y., Tao, L., Duan, J., Lv, L., Zhang, J., Shen, L., Wang, H., et al. (2024) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ad33fa
Metal Oxide Neural Devices and Their Applications
Song, B. (2024) · Highlights in Science Engineering and Technology · doi:10.54097/zwgj1t76
“Since this structure can intuitively detect the movement of ions under various characterization methods, it is usually used to characterize the resistive switching mechanism of the device [16][17].”
MethodShaikh, M. T. A. S., Kim, K. J., Kim, H., & Rim, Y. S. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc01887k
Improvement on Uniformity and Endurance of Ag-Based Volatile Memristor via Annealing Engineering
Yi, Y., Song, X., Tang, Z., Li, S., Sun, D., Song, S., Feng, Y., Zhou, Z., Huang, P. C., Kang, J., et al. (2025) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2025.3636494
“In contrast, the CFs in the nonannealed device exhibit a conical geometry [23], [24], with the narrowest point located near the Ag electrode.”
Shao, H., Zhu, X., Zhang, X., Zheng, W., Zhang, L., & Chen, L. (2026) · Micromachines · doi:10.3390/mi17030364
“According to Guo et al. [22], the filament temperature increases when a higher current passes through these low-resistance copper CFs, accelerating the migration of copper atoms within the filaments.”
Non-conventional insulators : metal-insulator transition and topological protection
Mottaghizadeh, A. (2014) · theses.fr (ABES) · doi:10.70675/952fe651z4fcdz473cza5c6zb3c0168aea73
“b) SEM image of the same cell at low-resistance state with longer and larger Ag dendrites, obtained by applying a positive voltage on the Ag electrode side [71].”
BackgroundDevelopment of filamentary Memristive devices for synaptic plasticity implementation
Barbera, S. L. (2015) · theses.fr (ABES) · doi:10.70675/91a39e21z25c6z44d8zb0d3zd298023d1a34
Electro-optical memristors: from the origin to device implementation
Rashid, M. U., Khan, S. A., Tahir, Z., & Kim, Y. S. (2026) · Nanoscale · doi:10.1039/d6nr01032f
Gooran-Shoorakchaly, A., Sharifi, S., & Banad, Y. M. (2026) · ACS Omega · doi:10.1021/acsomega.6c01327
Metadata
- Authors
- Guo, X., Schindler, C., Menzel, S., & Waser, R.
- Affiliations
- Forschungszentrum Jülich (DE)
- RWTH Aachen University (DE)
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2007-09-24
- Volume
- 91
- Issue
- 13
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2087377374
- Cited by
- 248
- References
- 20
- Citations by year
- 2026: 3 · 2025: 9 · 2024: 11 · 2023: 8 · 2022: 9 · 2021: 13 · 2020: 15 · 2019: 13 · 2018: 12 · 2017: 19 · 2016: 16 · 2015: 21 · 2014: 27 · 2013: 14 · 2012: 14
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- green
- juser.fz-juelich.de
- Licence
- other-oa
- Locations
- Applied Physics Letters (publishedVersion)
- JuSER (Forschungszentrum Jülich) (submittedVersion, other-oa)
- RWTH Publications (RWTH Aachen) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Keywords
- resistive switching, bipolar switching, silver dendrites, resistive random access memory
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.