CoChat

Thermal conductivity and thermal boundary resistance of atomic layer deposited high- k dielectric aluminum oxide, hafnium oxide, and titanium oxide thin films on silicon

Open access

The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.

Abstract

The need for increased control of layer thickness and uniformity as device dimensions shrink has spurred increased use of atomic layer deposition (ALD) for thin film growth. The ability to deposit high dielectric constant (high-k) films via ALD has allowed for their widespread use in a swath of optical, optoelectronic, and electronic devices, including integration into CMOS compatible platforms. As the thickness of these dielectric layers is reduced, the interfacial thermal resistance can dictate the overall thermal resistance of the material stack compared to the resistance due to the finite dielectric layer thickness. Time domain thermoreflectance is used to interrogate both the thermal conductivity and the thermal boundary resistance of aluminum oxide, hafnium oxide, and titanium oxide films on silicon. We calculate a representative design map of effective thermal resistances, including those of the dielectric layers and boundary resistances, as a function of dielectric layer thickness, which will be of great importance in predicting the thermal resistances of current and future devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.5021044

Cites

54 of 54 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
FIG. 1 Measured effective thermal conductivities of TiO2 (triangles), Al 2 O 3 (circles), and HfO2 (squares) films ranging from 1 to 10 nm. A series thermal resistor model [Eq. (1)] is applied to the data for which the intrinsic thermal conductivity and total thermal boundary resistance are the fitting parameters. The best fits are shown as the lines in the plot.
FIG. 1 Measured effective thermal conductivities of TiO2 (triangles), Al 2 O 3 (circles), and HfO2 (squares) films ranging from 1 to 10 nm. A series thermal resistor model [Eq. (1)] is applied to the data for which the intrinsic thermal conductivity and total thermal boundary resistance are the fitting parameters. The best fits are shown as the lines in the plot.CC-BY · From the PDF
FIG. 2 Effective thermal resistances for ALD-grown highk dielectric (a) Al 2 O 3 , (b) HfO 2 , and (c) TiO 2 films studied in this work. The black lines in each figure display the total thermal resistance. The shaded regions display the combined resistance of the film, Rfi lm (where Rfi lm = d / i , where i is listed in Tables I and II), and film/substrate interface, TBR film/substrate , assuming an Al/film interfacial resistance between 3.34 and 6.67 m 2 KGW ☞ 1 . (d) combines the effective thermal resistances displayed in (a)-(c) for comparison.
FIG. 2 Effective thermal resistances for ALD-grown highk dielectric (a) Al 2 O 3 , (b) HfO 2 , and (c) TiO 2 films studied in this work. The black lines in each figure display the total thermal resistance. The shaded regions display the combined resistance of the film, Rfi lm (where Rfi lm = d / i , where i is listed in Tables I and II), and film/substrate interface, TBR film/substrate , assuming an Al/film interfacial resistance between 3.34 and 6.67 m 2 KGW ☞ 1 . (d) combines the effective thermal resistances displayed in (a)-(c) for comparison.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 54 references

Research works printed but not linked: 3

  1. 1. T. W. Kim, D. H. Kim, D. H. Koh, H. M. Kwon, R. H. Baek, D. Veksler, C. Huffman, K. Matthews, S. Oktyabrsky, A. Greene, Y. Ohsawa, A. Ko, H. Nakajima, M. Takahashi, T. Nishizuka, H. Ohtake, S. K. Banerjee, S. H. Shin, D. H. Ko, C. Kang, D. Gilmer, R. J. W. Hill, W. Maszara, C. Hobbs, and P. D. Kirsch, "Sub-100 nm InGaAs quantum-well (QW) tri-gate MOSFETs with Al 2 O 3 /HfO 2 (EOT < 1 nm) for low-power logic applications," in IEEE International Electron Devices Meeting 2013 (IEEE, 2013).
  2. 54. M. W. J. Chase, NIST-JANAF Thermochemical Tables, 4th ed., Journal of Physical and Chemical Reference Data Monographs or Supplements (1998), Vol. 9, pp. 1-1951.
  3. 57. N. H. Nickel, Laser Crystallization of Silicon-Fundamentals to Devices (Academic Press, New York, 2003).

Cited by

Items 101–139 of 139

Metadata

Authors
Scott, E. A., Gaskins, J. T., King, S. W., & Hopkins, P. E.
Affiliations
Intel (United States) (US)
Corresponding author
Hopkins, Patrick E.
Venue
APL Materials
Published
2018-05-01
Volume
6
Issue
5
ISSN
2166-532X (ISSN-L)
OpenAlex
W2799835424
Cited by
139
References
54
Citations by year
2026: 17 · 2025: 24 · 2024: 15 · 2023: 18 · 2022: 20 · 2021: 23 · 2020: 14 · 2019: 5 · 2018: 3
FWCI
4.20
Type
journal article
Language
en
Open access
Licence
Locations
  • APL Materials (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
Army Research Office (W911NF-16-1-0320)
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Copper Interconnects and Reliability
Keywords
thermal conductivity, interfacial thermal resistance, high-k dielectrics, atomic layer deposition, Al2O3 thin films, hafnium oxide thin films, TiO2 thin films, time-domain thermoreflectance, thermal resistance, dielectric thickness, silicon substrate, CMOS integration

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.