The DOI matches its Crossref record; 154 of the 154 references it cites were found in a registry or an index.
Thin-film solar cells exceeding 22% solar cell efficiency: An overview on CdTe-, Cu(In,Ga)Se2-, and perovskite-based materials
Abstract
Already, several technologies of polycrystalline thin-film photovoltaic materials have achieved certified record small-cell power conversion efficiencies exceeding 22%. They are CdTe, Cu(In,Ga)(S,Se)2 (CIGS), and metal halide perovskite (PSC), each named after the light-absorbing semiconductor material. Thin-film solar cells and modules require very little active material due to their very high absorption coefficient. Efficient production methods with low materials waste, moderate temperatures, attractive cost structures, and favorable energy payback times will play a strong role in market development as thin-film technologies reach full maturity, including mass production and the standardization of production machineries. In fact, the first two technologies have already been developed up to the industrial scale with a market share of several GW. In this review article, we outline similarities and differences between these high-efficiency thin-film technologies from both the materials and the industrial point of view. We address the materials characteristics and device concepts for each technology, including a description of recent developments that have led to very high efficiency achievements. We provide an overview of the CIGS industry players and their current status. The newcomer PSC has demonstrated its potential in the laboratory, and initial efforts in industrial production are underway. A large number of laboratories are experimenting through a wide range of options in order to optimize not only the efficiency but also stability, environmental aspects, and manufacturability of PSC. Its high efficiency and its high bandgap make PSC particularly attractive for tandem applications. An overview of all these topics is included here along with a list of materials configurations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
Theory, Production and Mechanism of Formation of Monodispersed Hydrosols
LaMer, V. K., & Dinegar, R. H. (1950) · Journal of the American Chemical Society · doi:10.1021/ja01167a001 · Cited by 3,894
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Ionic transport in hybrid lead iodide perovskite solar cells
Eames, C., Frost, J. M., Barnes, P. R. F., O’Regan, B. C., Walsh, A., & Islam, M. S. (2015) · Nature Communications · doi:10.1038/ncomms8497 · Cited by 2,889
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Perovskite solar cells: an emerging photovoltaic technology
Park, N.-G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.07.007 · Cited by 2,097
Past achievements and future challenges in the development of optically transparent electrodes
Ellmer, K. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.282 · Cited by 2,090
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Charge-Carrier Mobilities in Metal Halide Perovskites: Fundamental Mechanisms and Limits
Herz, L. M. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00276 · Cited by 1,402
Yang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
Tress, W., Marinova, N., Moehl, T., Zakeeruddin, S. M., Nazeeruddin, M. K., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03664f · Cited by 1,381
Sahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells
Chirilă, A., Reinhard, P., Pianezzi, F., Bloesch, P., Uhl, A. R., Fella, C., Kranz, L., Keller, D., Gretener, C., Hagendorfer, H., et al. (2013) · Nature Materials · doi:10.1038/nmat3789 · Cited by 1,285
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Stoumpos, C. C., Frazer, L., Clark, D. J., Kim, Y. S., Rhim, S. H., Freeman, A. J., Ketterson, J. B., Jang, J. I., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b01025 · Cited by 945
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702019 · Cited by 904
Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films
Chirilă, A., Buecheler, S., Pianezzi, F., Bloesch, P., Gretener, C., Uhl, A. R., Fella, C., Kranz, L., Perrenoud, J., Seyrling, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3122 · Cited by 897
Prasanna, R., Gold-Parker, A., Leijtens, T., Conings, B., Babayigit, A., Boyen, H.-G., Toney, M. F., & McGehee, M. D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04981 · Cited by 893
Universal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering
Son, D.-Y., Kim, S.-G., Seo, J.-Y., Lee, S.-H., Shin, H., Lee, D., & Park, N.-G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10430 · Cited by 891
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Highly stable, phase pure Cs2AgBiBr6 double perovskite thin films for optoelectronic applications
Greul, E., Petrus, M. L., Binek, A., Docampo, P., & Bein, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06816f · Cited by 772
Ionic polarization-induced current–voltage hysteresis in CH3NH3PbX3 perovskite solar cells
Meloni, S., Moehl, T., Tress, W., Franckevičius, M., Saliba, M., Lee, Y. H., Gao, P., Nazeeruddin, M. K., Zakeeruddin, S. M., Rothlisberger, U., et al. (2016) · Nature Communications · doi:10.1038/ncomms10334 · Cited by 761
Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells
Shao, Y., Yuan, Y., & Huang, J. (2016) · Nature Energy · doi:10.1038/nenergy.2015.1 · Cited by 757
Photoinduced Giant Dielectric Constant in Lead Halide Perovskite Solar Cells
Juarez-Perez, E. J., Sanchez, R. S., Badia, L., Garcia-Belmonte, G., Kang, Y. S., Mora-Sero, I., & Bisquert, J. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5011169 · Cited by 744
Crystal Structure and Photoconductivity of Cæsium Plumbohalides
MØLLER, C. K. (1958) · Nature · doi:10.1038/1821436a0 · Cited by 728
Jeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
Solar cell efficiency tables (version 52)
Green, M. A., Hishikawa, Y., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., & Ho‐Baillie, A. W. Y. (2018) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3040 · Cited by 710
Modeling Anomalous Hysteresis in Perovskite Solar Cells
van Reenen, S., Kemerink, M., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01645 · Cited by 687
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Meng, L., You, J., Guo, T.-F., & Yang, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00404 · Cited by 659
Light-Induced Anion Phase Segregation in Mixed Halide Perovskites
Brennan, M. C., Draguta, S., Kamat, P. V., & Kuno, M. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01151 · Cited by 643
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells
Wang, Q., Dong, Q., Li, T., Gruverman, A., & Huang, J. (2016) · Advanced Materials · doi:10.1002/adma.201600969 · Cited by 633
High-efficiency CuIn x Ga1−x Se2 solar cells made from (In x,Ga1−x)2Se3 precursor films
Gabor, A. M., Tuttle, J. R., Albin, D. S., Contreras, M. A., Noufi, R., & Hermann, A. M. (1994) · Applied Physics Letters · doi:10.1063/1.112670 · Cited by 619
Song, Z., McElvany, C. L., Phillips, A. B., Celik, I., Krantz, P. W., Watthage, S. C., Liyanage, G. K., Apul, D., & Heben, M. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00757d · Cited by 613
Singh, T., & Miyasaka, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201700677 · Cited by 572
Molecular ferroelectric contributions to anomalous hysteresis in hybrid perovskite solar cells
Frost, J. M., Butler, K. T., & Walsh, A. (2014) · APL MATERIALS · doi:10.1063/1.4890246 · Cited by 549
Efficient Monolithic Perovskite/Silicon Tandem Solar Cell with Cell Area >1 cm2
Werner, J., Weng, C.-H., Walter, A., Fesquet, L., Seif, J. P., De Wolf, S., Niesen, B., & Ballif, C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02686 · Cited by 539
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Solar cell efficiency tables (version 46)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2637 · Cited by 528
Duong, T., Wu, Y., Shen, H., Peng, J., Fu, X., Jacobs, D., Wang, E., Kho, T. C., Fong, K. C., Stocks, M., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700228 · Cited by 519
Momblona, C., Gil-Escrig, L., Bandiello, E., Hutter, E. M., Sessolo, M., Lederer, K., Blochwitz-Nimoth, J., & Bolink, H. J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee02100j · Cited by 514
Cost‐Performance Analysis of Perovskite Solar Modules
Cai, M., Wu, Y., Chen, H., Yang, X., Qiang, Y., & Han, L. (2016) · Advanced Science · doi:10.1002/advs.201600269 · Cited by 513
Mixed‐Organic‐Cation Tin Iodide for Lead‐Free Perovskite Solar Cells with an Efficiency of 8.12%
Zhao, Z., Gu, F., Li, Y., Sun, W., Ye, S., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2017) · Advanced Science · doi:10.1002/advs.201700204 · Cited by 505
Fu, F., Feurer, T., Jäger, T., Avancini, E., Bissig, B., Yoon, S., Buecheler, S., & Tiwari, A. N. (2015) · Nature Communications · doi:10.1038/ncomms9932 · Cited by 491
Yoon, J., Sung, H., Lee, G., Cho, W., Ahn, N., Jung, H. S., & Choi, M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02650h · Cited by 469
Beneficial Effects of PbI2 Incorporated in Organo‐Lead Halide Perovskite Solar Cells
Kim, Y. C., Jeon, N. J., Noh, J. H., Yang, W. S., Seo, J., Yun, J. S., Ho‐Baillie, A., Huang, S., Green, M. A., Seidel, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502104 · Cited by 462
Transparent Electrodes for Efficient Optoelectronics
Morales‐Masis, M., De Wolf, S., Woods‐Robinson, R., Ager, J. W., & Ballif, C. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600529 · Cited by 462
Magnetoabsorption of the lowest exciton in perovskite-type compound (CH3NH3)PbI3
Hirasawa, M., Ishihara, T., Goto, T., Uchida, K., & Miura, N. (1994) · Physica B: Condensed Matter · doi:10.1016/0921-4526(94)91130-4 · Cited by 459
Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling
Cheacharoen, R., Rolston, N., Harwood, D., Bush, K. A., Dauskardt, R. H., & McGehee, M. D. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02564e · Cited by 457
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Zhou, Y., Yang, M., Wu, W., Vasiliev, A. L., Zhu, K., & Padture, N. P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00477b · Cited by 436
CdTe solar cells with open-circuit voltage breaking the 1 V barrier
Burst, J. M., Duenow, J. N., Albin, D. S., Colegrove, E., Reese, M. O., Aguiar, J. A., Jiang, C.-S., Patel, M. K., Al-Jassim, M. M., Kuciauskas, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.15 · Cited by 435
Beyond methylammonium lead iodide: prospects for the emergent field of ns2containing solar absorbers
Ganose, A. M., Savory, C. N., & Scanlon, D. O. (2017) · Chemical Communications · doi:10.1039/c6cc06475b · Cited by 433
Perovskite Solar Cells Go Lead Free
Abate, A. (2017) · Joule · doi:10.1016/j.joule.2017.09.007 · Cited by 425
Perovskite-Based Solar Cells: Materials, Methods, and Future Perspectives
Zhou, D., Zhou, T., Tian, Y., Zhu, X., & Tu, Y. (2018) · Journal of Nanomaterials · doi:10.1155/2018/8148072 · Cited by 422
Stolterfoht, M., Wolff, C. M., Amir, Y., Paulke, A., Perdigón-Toro, L., Caprioglio, P., & Neher, D. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00899f · Cited by 415
Ye, S., Rao, H., Zhao, Z., Zhang, L., Bao, H., Sun, W., Li, Y., Gu, F., Wang, J., Liu, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01439 · Cited by 401
Li, T., Pan, Y., Wang, Z., Xia, Y., Chen, Y., & Huang, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01798g · Cited by 370
Rajagopal, A., Yang, Z., Jo, S. B., Braly, I. L., Liang, P., Hillhouse, H. W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201702140 · Cited by 368
Effects of Na on the electrical and structural properties of CuInSe2
Wei, S.-H., Zhang, S. B., & Zunger, A. (1999) · Journal of Applied Physics · doi:10.1063/1.370534 · Cited by 363
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
Technological aspects of flexible CIGS solar cells and modules
Kessler, F., & Rudmann, D. (2004) · Solar Energy · doi:10.1016/j.solener.2004.04.010 · Cited by 333
High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration
Fu, F., Feurer, T., Weiss, T. P., Pisoni, S., Avancini, E., Andres, C., Buecheler, S., & Tiwari, A. N. (2016) · Nature Energy · doi:10.1038/nenergy.2016.190 · Cited by 314
Mixed Sn–Ge Perovskite for Enhanced Perovskite Solar Cell Performance in Air
Ito, N., Kamarudin, M. A., Hirotani, D., Zhang, Y., Shen, Q., Ogomi, Y., Iikubo, S., Minemoto, T., Yoshino, K., & Hayase, S. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b00275 · Cited by 299
Optical properties of CH3NH3PbX3 (X = halogen) and their mixed-halide crystals
Kitazawa, N., Watanabe, Y., & Nakamura, Y. (2002) · Journal of Materials Science · doi:10.1023/a:1016584519829 · Cited by 287
Chen, B., Bai, Y., Yu, Z., Li, T., Zheng, X., Dong, Q., Shen, L., Boccard, M., Gruverman, A., Holman, Z., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601128 · Cited by 284
Monolithic Perovskite‐CIGS Tandem Solar Cells via In Situ Band Gap Engineering
Todorov, T. K., Gershon, T., Gunawan, O., Lee, Y. S., Sturdevant, C., Chang, L., & Guha, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500799 · Cited by 280
Zhao, D., Wang, C., Song, Z., Yu, Y., Chen, C., Zhao, X., Zhu, K., & Yan, Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01287 · Cited by 276
High-Quality (CH3NH3)3Bi2I9 Film-Based Solar Cells: Pushing Efficiency up to 1.64%
Zhang, Z., Li, X., Xia, X., Wang, Z., Huang, Z., Lei, B., & Gao, Y. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01952 · Cited by 271
Tress, W., Correa Baena, J. P., Saliba, M., Abate, A., & Graetzel, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600396 · Cited by 270
Sahli, F., Kamino, B. A., Werner, J., Bräuninger, M., Paviet‐Salomon, B., Barraud, L., Monnard, R., Seif, J. P., Tomasi, A., Jeangros, Q., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701609 · Cited by 263
Shen, H., Duong, T., Peng, J., Jacobs, D., Wu, N., Gong, J., Wu, Y., Karuturi, S. K., Fu, X., Weber, K., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02627g · Cited by 257
Ultrathin and flexible perovskite solar cells with graphene transparent electrodes
Liu, Z., You, P., Xie, C., Tang, G., & Yan, F. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.08.038 · Cited by 252
Park, Y. H., Jeong, I., Bae, S., Son, H. J., Lee, P., Lee, J., Lee, C., & Ko, M. J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605988 · Cited by 249
Jain, S. M., Phuyal, D., Davies, M. L., Li, M., Philippe, B., De Castro, C., Qiu, Z., Kim, J., Watson, T., Tsoi, W. C., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.05.003 · Cited by 245
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
고민재, 이진우, 정인영, et al. (2015) · Cited by 235
Monolithic perovskite/silicon-homojunction tandem solar cell with over 22% efficiency
Wu, Y., Yan, D., Peng, J., Duong, T., Wan, Y., Phang, S. P., Shen, H., Wu, N., Barugkin, C., Fu, X., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02288c · Cited by 232
Polycrystalline CdSeTe/CdTe Absorber Cells With 28 mA/cm2 Short-Circuit Current
Munshi, A. H., Kephart, J., Abbas, A., Raguse, J., Beaudry, J.-N., Barth, K., Sites, J., Walls, J., & Sampath, W. (2018) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2017.2775139 · Cited by 226
A strategic review on processing routes towards highly efficient perovskite solar cells
Dubey, A., Adhikari, N., Mabrouk, S., Wu, F., Chen, K., Yang, S., & Qiao, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08277k · Cited by 226
Monocrystalline CdTe solar cells with open-circuit voltage over 1 V and efficiency of 17%
Zhao, Y., Boccard, M., Liu, S., Becker, J., Zhao, X.-H., Campbell, C. M., Suarez, E., Lassise, M. B., Holman, Z., & Zhang, Y.-H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.67 · Cited by 222
Efficient Flexible Solar Cell based on Composition‐Tailored Hybrid Perovskite
Bi, C., Chen, B., Wei, H., DeLuca, S. J., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201605900 · Cited by 220
Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films
Marudachalam, M., Birkmire, R. W., Hichri, H., Schultz, J. M., Swartzlander, A. B., & Al-Jassim, M. M. (1997) · Journal of Applied Physics · doi:10.1063/1.366122 · Cited by 217
Leijtens, T., Giovenzana, T., Habisreutinger, S. N., Tinkham, J. S., Noel, N. K., Kamino, B. A., Sadoughi, G., Sellinger, A., & Snaith, H. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10093 · Cited by 211
Superior stability for perovskite solar cells with 20% efficiency using vacuum co-evaporation
Zhu, X., Yang, D., Yang, R., Yang, B., Yang, Z., Ren, X., Zhang, J., Niu, J., Feng, J., & Liu, S. (. (2017) · Nanoscale · doi:10.1039/c7nr04501h · Cited by 203
Friedlmeier, T. M., Jackson, P., Bauer, A., Hariskos, D., Kiowski, O., Wuerz, R., & Powalla, M. (2015) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2015.2458039 · Cited by 199
Self-citationEperon, G. E., Bryant, D., Troughton, J., Stranks, S. D., Johnston, M. B., Watson, T., Worsley, D. A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502367k · Cited by 199
Bastiani, M. D., Dell’Erba, G., Gandini, M., D’Innocenzo, V., Neutzner, S., Kandada, A. R. S., Grancini, G., Binda, M., Prato, M., Ball, J. M., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501453 · Cited by 194
Highly Efficient Perovskite Solar Modules by Scalable Fabrication and Interconnection Optimization
Yang, M., Kim, D. H., Klein, T. R., Li, Z., Reese, M. O., Tremolet de Villers, B. J., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01221 · Cited by 192
Metal Oxides as Efficient Charge Transporters in Perovskite Solar Cells
Haque, M. A., Sheikh, A. D., Guan, X., & Wu, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602803 · Cited by 191
Wearable Large‐Scale Perovskite Solar‐Power Source via Nanocellular Scaffold
Hu, X., Huang, Z., Zhou, X., Li, P., Wang, Y., Huang, Z., Su, M., Ren, W., Li, F., Li, M., et al. (2017) · Advanced Materials · doi:10.1002/adma.201703236 · Cited by 188
Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates
Troughton, J., Bryant, D., Wojciechowski, K., Carnie, M. J., Snaith, H., Worsley, D. A., & Watson, T. M. (2015) · J. Mater. Chem. A · doi:10.1039/c5ta01755f · Cited by 160
Perovskite solar cells must come of age
Saliba, M. (2018) · Science · doi:10.1126/science.aar5684 · Cited by 153
Zhang, F., Song, J., Hu, R., et al. (2018) · Small · doi:10.1002/smll.201704007 · Cited by 141
Cu(In,Ga)Se2 Solar Cells: Device Stability Based on Chemical Flexibility
Guillemoles, J., Rau, U., Kronik, L., Schock, H., & Cahen, D. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199908)11:11<957::aid-adma957>3.0.co;2-1 · Cited by 130
Cupric bromide hybrid perovskite heterojunction solar cells
Cui, X., Jiang, K., Huang, J., Zhang, Q., Su, M.-J., Yang, L., Song, Y., & Zhou, X. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.07.013 · Cited by 122
Conings, B., Babayigit, A. H., Klug, M. T., Bai, S., Gauquelin, N., Sakai, N., Wang, J. T., Verbeeck, J., Boyen, H. ‐., & Snaith, H. J. (2016) · Advanced Materials · doi:10.1002/adma.201603747 · Cited by 115
Research progress on large-area perovskite thin films and solar modules
Yang, Z., Zhang, S., Li, L., & Chen, W. (2017) · Journal of Materiomics · doi:10.1016/j.jmat.2017.09.002 · Cited by 112
CIGS thin-film solar cells and modules on enamelled steel substrates
Wüerz, R., Eicke, A., Kessler, F., et al. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.01.004 · Cited by 99
Shunt‐Blocking Layers for Semitransparent Perovskite Solar Cells
Hörantner, M. T., Nayak, P. K., Mukhopadhyay, S., Wojciechowski, K., Beck, C., McMeekin, D. P., Kamino, B. A., Eperon, G. E., & Snaith, H. J. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201500837 · Cited by 97
In-depth analysis of chloride treatments for thin-film CdTe solar cells
Major, J. D., Turkestani, M. K. A., Bowen, L., Brossard, M., Li, C., Lagoudakis, P. G., Pennycook, S. J., Phillips, L. J., Treharne, R. E., & Durose, K. (2016) · Nature Communications · doi:10.1038/ncomms13231 · Cited by 97
Keßler, J., Chityuttakan, C., Lu, J., Schöldström, J., & Stolt, L. (2003) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.495 · Cited by 93
Game, O. S., Buchsbaum, G. J., Zhou, Y., Padture, N. P., & Kingon, A. I. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606584 · Cited by 90
Glass needs for a growing photovoltaics industry
Burrows, K., & Fthenakis, V. M. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.09.028 · Cited by 87
Research progress on organic–inorganic halide perovskite materials and solar cells
Ono, L. K., & Qi, Y. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aaa727 · Cited by 75
Bifacial Perovskite Solar Cells Featuring Semitransparent Electrodes
Hanmandlu, C., Chen, C.-Y., Boopathi, K. M., Lin, H., Lai, C., & Chu, C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06607 · Cited by 71
Lam, J., Chen, J., Tsai, P.-C., Hsieh, Y.-T., Chueh, C., Tung, S., & Chen, W. (2017) · RSC Advances · doi:10.1039/c7ra10321b · Cited by 69
Indium sulfide thin films deposited by the spray ion layer gas reaction technique
Allsop, N. A., Schönmann, A., Belaidi, A., Muffler, H. ‐., Mertesacker, B., Bohne, W., Strub, E., Röhrich, J., Lux‐Steiner, M. C., & Fischer, C. ‐. (2006) · Thin Solid Films · doi:10.1016/j.tsf.2006.01.019 · Cited by 64
Laser Patterning Method for Integrated Type a-Si Solar Cell Submodules
Nakano, S., MATSUOKA, T., Kiyama, S., Kawata, H., Nakamura, N., Nakashima, Y., Tsuda, S., Nishiwaki, H., Ohnishi, M., Nagaoka, I., et al. (1986) · Japanese Journal of Applied Physics · doi:10.1143/jjap.25.1936 · Cited by 63
Jang, Y. H., Lee, J. M., Seo, J. W., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06163c · Cited by 62
A system dynamics model of tellurium availability for CdTe PV
Houari, Y., Speirs, J. F., Candelise, C., & Gross, R. (2013) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2359 · Cited by 60
Monitoring a Silent Phase Transition in CH3NH3PbI3 Solar Cells via Operando X-ray Diffraction
Schelhas, L. T., Christians, J. A., Berry, J. J., Toney, M. F., Tassone, C. J., Luther, J. M., & Stone, K. H. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00441 · Cited by 60
Scalable perovskite/CIGS thin-film solar module with power conversion efficiency of 17.8%
Paetzold, U. W., Jaysankar, M., Gehlhaar, R., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01651d · Cited by 57
3D Lifetime Tomography Reveals How CdCl2 Improves Recombination Throughout CdTe Solar Cells
Barnard, E. S., Ursprung, B., Colegrove, E., Moutinho, H. R., Borys, N. J., Hardin, B. E., Peters, C. H., Metzger, W. K., & Schuck, P. J. (2016) · Advanced Materials · doi:10.1002/adma.201603801 · Cited by 50
New perspective on the performance stability of CdTe solar cells
Gretener, C., Perrenoud, J., Kranz, L., Cheah, E., Dietrich, M., Buecheler, S., & Tiwari, A. N. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.11.017 · Cited by 47
Metastability and reliability of CdTe solar cells
Guo, D. G., Brinkman, D., Shaik, A. R., et al. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aab1e1 · Cited by 23
Cited by
Review of degradation and failure phenomena in photovoltaic modules
Aghaei, M., Fairbrother, A., Gok, A., Ahmad, S., Kazim, S., Lobato, K., Oreski, G., Reinders, A., Schmitz, J., Theelen, M., et al. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112160 · Cited by 636
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Progress and prospects for ultrathin solar cells
Massiot, I., Cattoni, A., & Collin, S. (2020) · Nature Energy · doi:10.1038/s41560-020-00714-4 · Cited by 322
Metadata
- Authors
- Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T.
- Venue
- Applied Physics Reviews
- Publisher
- AIP Publishing
- Published
- 2018-12-01
- Volume
- 5
- Issue
- 4
- ISSN
- 1931-9401 (ISSN-L)
- OpenAlex
- W2907877958
- Cited by
- 281
- References
- 154
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.