The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Stretchable materials of high toughness and low hysteresis
Open accessAbstract
Significance: Many applications in engineering require stretchable materials that dissipate little energy during normal operation of cyclic loads (low hysteresis), but dissipate much energy to resist rupture (high toughness), and survive prolonged cyclic loads (fatigue resistant). However, existing stretchable materials cannot meet these requirements simultaneously. Here we present a principle to achieve this goal, and demonstrate the principle by a composite of two stretchable materials of low hysteresis, with large modulus contrast and strong adhesion. The composite retains the low hysteresis, but is much tougher and more fatigue resistant than the constituents. The same principle applies to elastomers, gels, and elastomer–gel hybrids. This class of materials provides opportunities to create high-cycle and low-dissipation soft robots and soft human–machine interfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly stretchable and tough hydrogels
Sun, J.-Y., Zhao, X., Illeperuma, W. R. K., Chaudhuri, O., Oh, K. H., Mooney, D. J., Vlassak, J. J., & Suo, Z. (2012) · Nature · doi:10.1038/nature11409 · Cited by 5,481
Self-citationKim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Designing hydrogels for controlled drug delivery
Li, J., & Mooney, D. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.71 · Cited by 4,832
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Double‐Network Hydrogels with Extremely High Mechanical Strength
Gong, J. P., Katsuyama, Y., Kurokawa, T., & Osada, Y. (2003) · Advanced Materials · doi:10.1002/adma.200304907 · Cited by 4,542
Stretchable, Transparent, Ionic Conductors
Keplinger, C., Sun, J.-Y., Foo, C. C., Rothemund, P., Whitesides, G. M., & Suo, Z. (2013) · Science · doi:10.1126/science.1240228 · Cited by 1,754
Self-citationFiber-reinforced composites : materials, manufacturing, and design
Mallick, P. K. (2008) · Thammasat University Digital Collections · Cited by 1,718
Yang, C., & Suo, Z. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0018-7 · Cited by 1,709
Self-citationFiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition
Mallick, P. K. (2007) · CRC Press eBooks · doi:10.1201/9781420005981 · Cited by 1,634
Perspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Annabi, N., Tamayol, A., Uquillas, J. A., Akbari, M., Bertassoni, L. E., Cha, C., Camci‐Unal, G., Dokmeci, M. R., Peppas, N. A., & Khademhosseini, A. (2014) · Advanced Materials · doi:10.1002/adma.201303233 · Cited by 1,409
A review on the Mullins effect
Diani, J., Fayolle, B., & Gilormini, P. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.11.017 · Cited by 1,249
Toughening Elastomers with Sacrificial Bonds and Watching Them Break
Ducrot, E., Chen, Y., Bulters, M., Sijbesma, R. P., & Creton, C. (2014) · Science · doi:10.1126/science.1248494 · Cited by 1,203
Electronic dura mater for long-term multimodal neural interfaces
Minev, I. R., Musienko, P., Hirsch, A., Barraud, Q., Wenger, N., Moraud, E. M., Gandar, J., Capogrosso, M., Milekovic, T., Asboth, L., et al. (2015) · Science · doi:10.1126/science.1260318 · Cited by 1,082
Self-citationSelf-powered ultra-flexible electronics via nano-grating-patterned organic photovoltaics
Park, S., Heo, S. W., Lee, W., Inoue, D., Jiang, Z., Yu, K., Jinno, H., Hashizume, D., Sekino, M., Yokota, T., et al. (2018) · Nature · doi:10.1038/s41586-018-0536-x · Cited by 1,068
The strength of highly elastic materials
Lake, G. J., & Thomas, A. G. (1967) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1967.0160 · Cited by 1,012
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Xu, S., Yan, Z., Jang, K.-I., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M., McCracken, J., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 931
Stretchable Organic Solar Cells
Lipomi, D. J., Tee, B. C. ‐., Vosgueritchian, M., & Bao, Z. (2011) · Advanced Materials · doi:10.1002/adma.201004426 · Cited by 853
Whitesides, G. M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800907 · Cited by 850
An electric-eel-inspired soft power source from stacked hydrogels
Schroeder, T. B. H., Guha, A., Lamoureux, A., VanRenterghem, G., Sept, D., Shtein, M., Yang, J., & Mayer, M. (2017) · Nature · doi:10.1038/nature24670 · Cited by 590
Compatibility of Mammalian Cells on Surfaces of Poly(dimethylsiloxane)
Lee, J. N., Jiang, X., Ryan, D., & Whitesides, G. M. (2004) · Langmuir · doi:10.1021/la048562+ · Cited by 379
Theoretical Model for the Elastic Behavior of Filler-Reinforced Vulcanized Rubbers
Mullins, L., & Tobin, N. R. (1957) · Rubber Chemistry and Technology · doi:10.5254/1.3542705 · Cited by 368
Large Strain and Fracture Properties of Poly(dimethylacrylamide)/Silica Hybrid Hydrogels
Lin, W.-C., Fan, W., Marcellan, A., Hourdet, D., & Creton, C. (2010) · Macromolecules · doi:10.1021/ma901937r · Cited by 314
Fatigue fracture of tough hydrogels
Bai, R., Yang, Q., Tang, J., Morelle, X. P., Vlassak, J., & Suo, Z. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.07.002 · Cited by 312
Self-citationFlaw sensitivity of highly stretchable materials
Chen, C., Wang, Z., & Suo, Z. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.002 · Cited by 278
Self-citationFatigue of double-network hydrogels
Zhang, W., Liu, X., Wang, J., Tang, J., Hu, J., Lu, T., & Suo, Z. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.10.018 · Cited by 240
Self-citationInfluence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers
Rey, T., Chagnon, G., Cam, J. L., & Favier, D. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.01.008 · Cited by 166
Fatigue Fracture of Self-Recovery Hydrogels
Bai, R., Yang, J., Morelle, X. P., Yang, C., & Suo, Z. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00045 · Cited by 164
Self-citationTriggerable tough hydrogels for gastric resident dosage forms
Liu, J., Pang, Y., Zhang, S., Cleveland, C., Yin, X., Booth, L., Lin, J., Lucy Lee, Y.-A., Mazdiyasni, H., Saxton, S., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00144-z · Cited by 159
Natural rubber for sustainable high-power electrical energy generation
Kaltseis, R., Keplinger, C., Koh, S. J. A., Baumgartner, R., Goh, Y. F., Ng, W.-H., Kogler, A., Tröls, A., Foo, C. C., Suo, Z., et al. (2014) · RSC Advances · doi:10.1039/c4ra03090g · Cited by 147
Self-citationFiller reinforcement of silicone rubber
Bueche, A. M. (1957) · Journal of Polymer Science · doi:10.1002/pol.1957.1202510902 · Cited by 108
Self-regenerating and hybrid irreversible/reversible PDMS microfluidic devices
Shiroma, L. S., Piazzetta, M. H. O., Duarte‐Junior, G. F., Coltro, W. K. T., Carrilho, E., Gobbi, Â. L., & Lima, R. S. (2016) · Scientific Reports · doi:10.1038/srep26032 · Cited by 62
Niu, H., Wang, H., Zhou, H., et al. (2014) · RSC Advances · doi:10.1039/c4ra00232f · Cited by 59
Designing extremely resilient and tough hydrogels via delayed dissipation
Lin, S., Zhou, Y., & Zhao, X. (2014) · Extreme Mechanics Letters · doi:10.1016/j.eml.2014.11.002 · Cited by 44
Cited by
Strong tough hydrogels via the synergy of freeze-casting and salting out
Hua, M., Wu, S., Ma, Y., Zhao, Y., Chen, Z., Frenkel, I., Strzalka, J., Zhou, H., Zhu, X., & He, X. (2021) · Nature · doi:10.1038/s41586-021-03212-z · Cited by 1,519
Fracture, fatigue, and friction of polymers in which entanglements greatly outnumber cross-links
Kim, J., Zhang, G., Shi, M., & Suo, Z. (2021) · Science · doi:10.1126/science.abg6320 · Cited by 1,348
Self-citationSoft Materials by Design: Unconventional Polymer Networks Give Extreme Properties
Zhao, X., Chen, X., Yuk, H., Lin, S., Liu, X., & Parada, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01088 · Cited by 1,161
Hydrogel Adhesion: A Supramolecular Synergy of Chemistry, Topology, and Mechanics
Yang, J., Bai, R., Chen, B., & Suo, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201901693 · Cited by 1,033
Self-citationDesign principles for strong and tough hydrogels
Li, X., & Gong, J. P. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00672-3 · Cited by 809
Metadata
- Authors
- Wang, Z., Xiang, C., Yao, X., Le Floch, P., Mendez, J., & Suo, Z.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2019-03-08
- Volume
- 116
- Issue
- 13
- Pages
- 5967-5972
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2920860000
- Cited by
- 433
- References
- 36
- FWCI
- 25.54
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.