Thermal Boundary Resistance in GaN Films Measured by Time Domain Thermoreflectance with Robust Monte Carlo Uncertainty Estimation
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
In this work, we investigate the thermal boundary resistance and thermal conductivity of GaN layers grown on Si with 100 nm AlN transition layers using time domain thermoreflectance (TDTR). The GaN layers ranged from 0.31 to 1.27 μm. Due to the challenges in determining the thermal boundary resistance of the buried interfaces found in this architecture, a new data reduction scheme for TDTR that utilizes a Monte Carlo fitting method is introduced and found to dramatically reduce the uncertainty in certain model parameters. The results show that the GaN thermal conductivity does not change significantly with layer thickness, whereas the resistance of the AlN layer decreases slightly with GaN thickness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoscale thermal transport. II. 2003–2012
Cahill, D. G., Braun, P. V., Chen, G., Clarke, D. R., Fan, S., Goodson, K. E., Keblinski, P., King, W. P., Mahan, G. D., Majumdar, A., et al. (2014) · Applied Physics Reviews · doi:10.1063/1.4832615 · Cited by 1,763
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
Schmidt, A. J., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.3006335 · Cited by 655 · cited 1×
“The model accounting for radial conduction is used [7], although for the beam sizes used the conduction is primarily one-dimensional.”
MethodHeat‐Transport Mechanisms in Superlattices
Koh, Y. K., Cao, Y., Cahill, D. G., & Jena, D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200800984 · Cited by 247 · cited 1×
“for a similar composition AlN-GaN SL [17].”
An optical pump-probe technique for measuring the thermal conductivity of liquids
Schmidt, A., Chiesa, M., Chen, X., & Chen, G. (2008) · Review of Scientific Instruments · doi:10.1063/1.2937458 · Cited by 184
Liu, J., Zhu, J., Tian, M., Gu, X., Schmidt, A., & Yang, R. (2013) · Review of Scientific Instruments · doi:10.1063/1.4797479 · Cited by 163 · cited 1×
“where R is the measured ratio of in phase temperature signal to out of phase temperature signal (−Vin/Vout) and p is the value of the property of interest [10, 11].”
BackgroundWei, C., Zheng, X., Cahill, D. G., & Zhao, J.-C. (2013) · Review of Scientific Instruments · doi:10.1063/1.4815867 · Cited by 110 · cited 1×
“The main sources of uncertainty in TDTR are the noise in the in-phase (Vin) and out-of-phase measurements (Vout) by the lock-in amplifier and the error in estimating the known properties in the thermal model [13].”
BackgroundInterpreting picosecond acoustics in the case of low interface stiffness
Hohensee, G. T., Hsieh, W.-P., Losego, M. D., & Cahill, D. G. (2012) · Review of Scientific Instruments · doi:10.1063/1.4766957 · Cited by 87 · cited 1×
“All samples were coated with a layer of Al for the TDTR measurement, nominally 90 nm, with the exact thicknesses measured by picosecond acoustics [5] (Figure 2b, inset).”
MethodThermal boundary conductance across metal-gallium nitride interfaces from 80 to 450 K
Donovan, B. F., Szwejkowski, C. J., Duda, J. C., Cheaito, R., Gaskins, J. T., Peter Yang, C.-Y., Constantin, C., Jones, R. E., & Hopkins, P. E. (2014) · Applied Physics Letters · doi:10.1063/1.4902233 · Cited by 72 · cited 1×
“[23] are within the range observed by Cho et al.”
Background
Cited by
Experimental observation of high intrinsic thermal conductivity of AlN
Cheng, Z., Koh, Y. R., Mamun, A., Shi, J., Bai, T., Huynh, K., Yates, L., Liu, Z., Li, R., Lee, E., et al. (2020) · Physical Review Materials · doi:10.1103/physrevmaterials.4.044602 · Cited by 183
Self-citationJiang, P., Qian, X., & Yang, R. (2017) · Review of Scientific Instruments · doi:10.1063/1.4991715 · Cited by 175
Low Thermal Boundary Resistance Interfaces for GaN-on-Diamond Devices
Yates, L., Anderson, J., Gu, X., Lee, C., Bai, T., Mecklenburg, M., Aoki, T., Goorsky, M. S., Kuball, M., Piner, E. L., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07014 · Cited by 169
Self-citationThermal conductance across β-Ga2O3-diamond van der Waals heterogeneous interfaces
Cheng, Z., Yates, L., Shi, J., Tadjer, M. J., Hobart, K. D., & Graham, S. (2019) · APL Materials · doi:10.1063/1.5089559 · Cited by 164
Self-citationHigh Thermal Boundary Conductance across Bonded Heterogeneous GaN—SiC Interfaces
Mu, F., Cheng, Z., Shi, J., Shin, S., Xu, B., Shiomi, J., Graham, S., & Suga, T. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10106 · Cited by 159
Self-citation
Metadata
- Authors
- Bougher, T. L., Yates, L., Lo, C.-F., Johnson, W., Graham, S., & Cola, B. A.
- Venue
- Nanoscale and Microscale Thermophysical Engineering
- Publisher
- Informa UK Limited
- Published
- 2016-01-02
- Volume
- 20
- Issue
- 1
- Pages
- 22-32
- ISSN
- 1556-7265 (ISSN-L)
- 1556-7273
- OpenAlex
- W2318767045
- Cited by
- 91
- References
- 9
- FWCI
- 4.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.