Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs
Open accessThe DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
Photocrosslinkable polymers such as gelatin methacrylate (GelMA) have various 3D bioprinting applications. These polymers crosslink upon exposure to UV irradiation with the existence of an appropriate photoinitiator. Two photoinitiators, Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) are commonly used. This study systematically investigates the effects of photoinitiator types on the cell viability, physical properties, and microstructure in 3D bioprinting of GelMA-based cellular constructs. The main conclusions are: (1) during the 3D bioprinting, the cell viability generally decreases as the photoinitiator concentration and printing time increase using both Irgacure 2959 and LAP. At the low photoinitiator concentrations (such as 0.3% and 0.5% (w/v)), the overall cell viability is good within the printing time of 60 min using both Irgacure 2959 and LAP. However, at the high photoinitiator concentrations (such as 0.7% and 0.9% (w/v)), the overall cell viability using LAP is much higher than that using Irgacure 2959 within the printing time of 60 min; (2) after the 3D bioprinting, the photoinitiator types, either Irgacure 2959 or LAP, have negligible effects on the post-printing cell viability after crosslinking; (3) after the 3D bioprinting, GelMA samples cured with Irgacure 2959 have slightly larger pore size, faster degradation rate, and greater swelling ratio compared to those cured with LAP; (4) 3D GelMA-based vascular-like constructs have been fabricated using dynamic optical projection stereolithography, and the measured dimensions have been compared with the designed dimensions showing good shape fidelity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 779
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
Polymeric Biomaterials with Degradation Sites for Proteases Involved in Cell Migration
West, J. L., & Hubbell, J. A. (1999) · Macromolecules · doi:10.1021/ma981296k · Cited by 625
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
Evaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 543
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture
Lee, Y.-B., Polio, S., Lee, W., Dai, G., Menon, L., Carroll, R. S., & Yoo, S.-S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 388
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
Zhang, A. P., Qu, X., Soman, P., Hribar, K. C., Lee, J. W., Chen, S., & He, S. (2012) · Advanced Materials · doi:10.1002/adma.201202024 · Cited by 360
Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes
Xu, C., Chai, W., Huang, Y., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 357
Self-citationGao, G., Schilling, A. F., Hubbell, K., Yonezawa, T., Truong, D., Hong, Y., Dai, G., & Cui, X. (2015) · Biotechnology Letters · doi:10.1007/s10529-015-1921-2 · Cited by 341
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
Antioxidant and prooxidant action of eugenol-related compounds and their cytotoxicity
Fujisawa, S., Atsumi, T., Kadoma, Y., & Sakagami, H. (2002) · Toxicology · doi:10.1016/s0300-483x(02)00194-4 · Cited by 284
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Porous Gelatin Hydrogels: 1. Cryogenic Formation and Structure Analysis
Van Vlierberghe, S., Cnudde, V., Dubruel, P., Masschaele, B., Cosijns, A., De Paepe, I., Jacobs, P. J. S., Van Hoorebeke, L., Remon, J. P., & Schacht, E. (2007) · Biomacromolecules · doi:10.1021/bm060684o · Cited by 215
Evaluation of bioink printability for bioprinting applications
Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y. (2018) · Applied Physics Reviews · doi:10.1063/1.5053979 · Cited by 214
Self-citationVisible‐Light‐Mediated Thiol‐Ene Hydrogelation Using Eosin‐Y as the Only Photoinitiator
Shih, H., & Lin, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200605 · Cited by 209
Methods for Photocrosslinking Alginate Hydrogel Scaffolds with High Cell Viability
Rouillard, A. D., Berglund, C. M., Lee, J. Y., Polacheck, W. J., Tsui, Y., Bonassar, L. J., & Kirby, B. J. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0582 · Cited by 200
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis
Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 197
Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink
Xu, C., Zhang, M., Huang, Y., Ogale, A., Fu, J., & Markwald, R. R. (2014) · Langmuir · doi:10.1021/la501430x · Cited by 184
Self-citationPorous Gelatin Hydrogels: 2. In Vitro Cell Interaction Study
Dubruel, P., Unger, R., Van Vlierberghe, S., Cnudde, V., Jacobs, P. J. S., Schacht, E., & Kirkpatrick, C. J. (2007) · Biomacromolecules · doi:10.1021/bm0606869 · Cited by 171
Digital micromirror device projection printing system for meniscus tissue engineering
Grogan, S. P., Chung, P. H., Soman, P., Chen, P., Lotz, M. K., Chen, S., & D’Lima, D. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.020 · Cited by 162
Nguyen, A. K., Goering, P. L., Reipa, V., & Narayan, R. J. (2019) · Biointerphases · doi:10.1116/1.5095886 · Cited by 160
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Additive manufacturing of photosensitive hydrogels for tissue engineering applications
Qin, X., Ovsianikov, A., Stampfl, J., & Liska, R. (2014) · BioNanoMaterials · doi:10.1515/bnm-2014-0008 · Cited by 142
Visible light cured thiol-vinyl hydrogels with tunable degradation for 3D cell culture
Hao, Y., Shih, H., Mũnoz, Z., Kemp, A., & Lin, C. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.044 · Cited by 125
Krishnamoorthy, S., Noorani, B., & Xu, C. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20205061 · Cited by 121
Self-citationPredictive Modeling of Droplet Formation Processes in Inkjet-Based Bioprinting
Wu, D., & Xu, C. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040619 · Cited by 101
Self-citationKang, L. H., Armstrong, P. A., Lee, L. J., Duan, B., Kang, K. H., & Butcher, J. T. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1619-1 · Cited by 90
Krishnamoorthy, S., Zhang, Z., & Xu, C. (2019) · Journal of Biomaterials Applications · doi:10.1177/0885328218823329 · Cited by 77
Self-citationWadnap, S., Krishnamoorthy, S., Zhang, Z., & Xu, C. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6239-5 · Cited by 48
Self-citationXu, H., Casillas, J., & Xu, C. (2019) · AIP Advances · doi:10.1063/1.5116371 · Cited by 37
Self-citationSedimentation study of bioink containing living cells
Xu, H., Zhang, Z., & Xu, C. (2019) · Journal of Applied Physics · doi:10.1063/1.5089245 · Cited by 34
Self-citationLigament flow during drop-on-demand inkjet printing of bioink containing living cells
Zhang, M., Krishnamoorthy, S., Song, H., Zhang, Z., & Xu, C. (2017) · Journal of Applied Physics · doi:10.1063/1.4978744 · Cited by 31
Self-citationDing, H., Dai, E., Tourlomousis, F., & Chang, R. C. (2017) · doi:10.1115/msec2017-2853 · Cited by 9
Ding, H., Tourlomousis, F., & Chang, R. C. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4037572 · Cited by 9
Cited by
3D bioprinted silk fibroin hydrogels for tissue engineering
Kim, S. H., Hong, H., Ajiteru, O., Sultan, M. T., Lee, Y. J., Lee, J. S., Lee, O. J., Lee, H., Park, H. S., Choi, K. Y., et al. (2021) · Nature Protocols · doi:10.1038/s41596-021-00622-1 · Cited by 294
Gelatin methacryloyl hydrogel, from standardization, performance, to biomedical application
He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300395 · Cited by 275
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
Ali, S. M., Patrawalla, N. Y., Kajave, N. S., Brown, A. B., & Kishore, V. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00985 · Cited by 26
Metadata
- Authors
- Xu, H., Casillas, J., Krishnamoorthy, S., & Xu, C.
- Venue
- Biomedical Materials
- Publisher
- IOP Publishing
- Published
- 2020-07-28
- Volume
- 15
- Issue
- 5
- Pages
- 055021
- ISSN
- 1748-6041 (ISSN-L)
- 1748-605X
- OpenAlex
- W3026101608
- Cited by
- 196
- References
- 52
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.