Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review
Open accessThe DOI matches its Crossref record; 198 of the 199 references it cites were found in a registry or an index; 18 of the 239 sources its claims cite were checked for support.
Abstract
As one quarter of global energy use serves the production of materials, the more efficient use of these materials presents a significant opportunity for the mitigation of greenhouse gas (GHG) emissions. With the renewed interest of policy makers in the circular economy, material efficiency (ME) strategies such as light-weighting and downsizing of and lifetime extension for products, reuse and recycling of materials, and appropriate material choice are being promoted. Yet, the emissions savings from ME remain poorly understood, owing in part to the multitude of material uses and diversity of circumstances and in part to a lack of analytical effort. We have reviewed emissions reductions from ME strategies applied to buildings, cars, and electronics. We find that there can be a systematic trade-off between material use in the production of buildings, vehicles, and appliances and energy use in their operation, requiring a careful life cycle assessment of ME strategies. We find that the largest potential emission reductions quantified in the literature result from more intensive use of and lifetime extension for buildings and the light-weighting and reduced size of vehicles. Replacing metals and concrete with timber in construction can result in significant GHG benefits, but trade-offs and limitations to the potential supply of timber need to be recognized. Repair and remanufacturing of products can also result in emission reductions, which have been quantified only on a case-by-case basis and are difficult to generalize. The recovery of steel, aluminum, and copper from building demolition waste and the end-of-life vehicles and appliances already results in the recycling of base metals, which achieves significant emission reductions. Higher collection rates, sorting efficiencies, and the alloy-specific sorting of metals to preserve the function of alloying elements while avoiding the contamination of base metals are important steps to further reduce emissions.
Overview
CoChat Summary
TL;DR
This review synthesizes material efficiency (ME) strategies for reducing greenhouse gas emissions from buildings, vehicles, and electronics, finding the largest quantified reductions from more intensive use and lifetime extension of buildings and light-weighting/downsizing of vehicles. It highlights systematic trade-offs between material production and operational energy use, and concludes that evidence for additional ME-driven GHG reductions in electronics is limited.
Key findings
- Material production caused 11.4 Gt CO₂-equivalent cradle-to-gate emissions in 2015; iron and steel contributed 32%, cement/lime/plaster 26%, rubber/plastics 13%, and other non-metallic minerals 13%.
- The largest quantified emission reductions in the reviewed literature come from more intensive use and lifetime extension of buildings and light-weighting/reduced size of vehicles; examples include building more intensive use ↓40% [16], building lifetime extension ↓47% [16] or ↓40% [66], vehicle more intensive use ↓39% steel fleet [16] and ↓93%–96% vehicle [149], and vehicle light-weighting ↓5%–45% steel [16,207].
- Replacing steel and concrete with timber can yield significant GHG benefits, but trade-offs and limited timber supply must be recognized; one Swiss study reports a median life cycle benefit of 25% for wood constructions due exclusively to material production, with increased heating/cooling energy from loss of thermal mass.
- Recycling of base metals from buildings, end-of-life vehicles, and appliances already achieves significant emission reductions; for electronics, quantified GHG benefit from recycling ranges from 1% to 10% of life cycle emissions, and the review finds minimal scope for additional ME-driven GHG reductions in EEE.
Methods
- The paper is a literature review of ME strategies applied to buildings, cars, and electrical and electronic equipment (EEE), addressing what strategies exist, their potential GHG reductions, and important gaps.
- It draws on existing case studies, scenario analyses, and modeling studies, including EXIOBASE-based estimates of material production emissions and IEA projections.
- Table 3 evaluates the state of evidence using IPCC-like scoring: availability of evidence (limited, medium, robust) and level of agreement (low, medium, high), based on reviewed case studies and expert judgment.
Limitations
- The paper states that emissions savings from ME remain poorly understood due to the multitude of material uses, diversity of circumstances, and lack of analytical effort; there are few up-scaling/scenario studies and very few ex-post studies.
- The paper states that studies often focus on highly developed countries or China, with a lack of information from other regions, and that the global potential emission reductions from materials are still poorly characterized.
- The paper states that integrated assessment models are poorly equipped to analyze ME options due to lack of data on technology performance, costs, markets, barriers, intersectoral life cycle effects, and material-containing product stocks; behavioral responses and rebound effects remain open questions. Evident from the text: many strategies are quantified only case-by-case and are difficult to generalize, and system boundary choices vary across studies.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 ( a ) Source of GHG emissions, i.e. material production itself ( scope 1 ) , energy inputs ( scope 2 ) , mining or other purchases ( scope 3 ) . ( b ) Cradle-to-gate greenhouse gas emissions from the production of key materials in 2015, identi fi ed by material. ( c ) Material-related GHG emissions by industries using materials [ 27 ] .](https://figures.cochat.ai/paper-figures/4e10e358264346dbbe1756f70199619f/material-efficiency-strategies-to-reducing-greenhouse-gas-emissions-associated-figure-3.png)
![Figure 4 GHGemissionsassociated with wood and massive residential buildings under Swiss conditions show a median life cycle bene fi t of 25% for wood constructions, exclusively due to material production, with increased energy demand for heating and cooling the building due to loss of thermal mass [ 78 ] .](https://figures.cochat.ai/paper-figures/9b104c3636ad48ee92099267054f20f6/material-efficiency-strategies-to-reducing-greenhouse-gas-emissions-associated-figure-4.png)
Verification
Claims the paper makes
13 Valid · 9 Not valid · 142 Not checked · 81 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“Second, displaced materials such as cement and steel have high emissions during production [76].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Lightweight design and material choice
What the sources say
- Supportedcites [76] 75. Oliver C D, Nassar N T, Lippke B R and McCarter J B 2014 Carbon, fossil fuel, and biodiversity mitigation with wood and forests J. Sustain. For. 33 248-75 source
The Introduction describes steel and concrete as substitutes for wood that use more energy in manufacture and therefore cause more fossil-fuel consumption and CO₂ emissions. The Results likewise identify emissions savings from avoiding the fossil fuels needed to manufacture steel or concrete. The paper discusses concrete rather than cement by name, but this supports the citing sentence’s point about high production emissions from displaced materials. (LLM, conf=0.92)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In Switzerland, a continued growth of floor area by 20% until 2050 would lead to an increase in cumulated material-related GHG emissions of 8% compared to a baseline scenario [44].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > More intensive use
What the sources say
- Partly supportedcites [44] 43. Heeren N and Hellweg S 2018 Tracking construction material over space and time: prospective and geo-referenced modeling of building stocks and construction material flows J. Ind. Ecol. 23 253-67 sourceExperimental — accuracy not yet measured
Our copy does carry the 8% figure in the scenario-results section (i n press, adjacent to Table 1 / Figure 5): 'Total cumulated emissions in 2055 are 8% higher for...' — but the sentence is cut off in our copy, so the comparator scenario is not fully stated there. Two qualifiers diverge from the claim: the source's 20% is not growth of total floor area but scenario 2 'Floor area', in which new constructions from 2015 are built with 20% larger floor space per person (59 and 62 m2/capita instead of 49 and 52), relative to a 'Base' scenario with constant per-capita floor area; and the cumulated-emissions comparison is reported for 2055, not 2050 (the simulation runs 2015-2055). The material-related GHG metric itself is supported (Figure 5: cumulated GHG emissions 2015-2055 for production and disposal of construction material; Abstract: 'An increase per capita floor area or material turnover will lead to a considerable increase in impacts'), but the scope is Swiss residential buildings, not Switzerland's building stock generally. (LLM, conf=0.70)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
None of the sources cited for this claim have been checked yet.
In the paper
“There is a renewed interest in the enhanced carbonation of concrete, a process by which CO 2 is absorbed from the atmosphere [73,102,109].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Issues of alloy-specific recycling are further discussed in the section on vehicle recycling.
What the sources say
- Not checked yetcites [73] 72. Dodoo A, Gustavsson L and Sathre R 2009 Carbon implications of end-of-life management of building materials Resour. Conserv. Recycl. 53 276-86 source
- Not checked yetcites [102] 101. Butera S, Christensen T H and Astrup T F 2015 Life cycle assessment of construction and demolition waste management Waste Manage. 44 196-205 source
- Could not verifycites [109] 108. Vieira P S and Horvath A 2008 Assessing the end-of-life impacts of buildings Environ. Sci. Technol. 42 4663-9 sourceExperimental — accuracy not yet measured
The Discussion reports that recycling concrete could reduce buildings’ greenhouse-gas emissions, but does not describe CO2 absorption from the atmosphere. Searches for concrete carbonation and enhanced carbonation found no passage addressing the process or renewed interest in it. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Materials constituted 55% of the carbon footprint of vehicle and transport equipment manufacturing of 1.6 Gt [27,42,119].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > ME in vehicles
What the sources say
- Not checked yetcites [27] 27. Hertwich E G 2019 The Carbon Footprint of Material Production Rises to 23% of Global GHG Emissions; New Haven
- Partly supportedcites [42] 41. Hertwich E G and Wood R 2018 The growing importance of scope 3 greenhouse gas emissions from industry Environ. Res. Lett. 13 104013 sourceExperimental — accuracy not yet measured
The section 'More insight by disaggregating industry' (p. 8) says materials were the largest contributor to emissions embodied in manufactured products. It does not give a 55% share or a 1.6 Gt footprint for vehicle and transport equipment manufacturing; Table 3 (p. 9) uses broader sector categories. (LLM, conf=0.84)
- Could not verifycites [119] 118. Stadler K et al 2018 EXIOBASE3-developing a time series of detailed environmentally extended multi-regional input- output tables J. Ind. Ecol. 22 502-15 sourceExperimental — accuracy not yet measured
The Emission Accounts section (p. 6) describes how emissions are allocated to EXIOBASE industries and products, but does not give a carbon footprint for vehicle and transport equipment manufacturing. Searches for “55%,” “1.6 Gt,” and “transport equipment” found no passage establishing the claimed materials share or total. (LLM, conf=0.72)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“For gasoline-driven vehicles, this type of light-weighting results in a reduction of life cycle emissions due to the reduction in operational energy use and despite the increased energy requirement for material production [151][152][153].”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Lifetime extension
What the sources say
- Not checked yetcites [151] 149. Koffler C 2014 Life cycle assessment of automotive lightweighting through polymers under US boundary conditions Int. J. Life Cycle Assess. 19 538-45 source
- Not checked yetcites [152] 150. Dhingra R and Das S 2014 Life cycle energy and environmental evaluation of downsized versus lightweight material automotive engines J. Clean. Prod. 85 347-58 source
- Supportedcites [153] 151. Modaresi R, Pauliuk S, Løvik A N and Müller D B 2014 Global carbon benefits of material substitution in passenger cars until 2050 and the impact on the steel and aluminum industries Environ. Sci. Technol. 48 10776-84 source
The Introduction says that light-weighting reduces fuel consumption but often raises emissions from materials production. Section 3.1 reports net GHG-emissions savings for the modeled light-weighting scenarios; the paper includes gasoline vehicles among its modeled drive technologies. Together, these passages support the claimed trade-off, though the reported savings are scenario-based rather than a guarantee for every vehicle. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
116 more claims · 3 with their cited sources checked
Create a free account to see all 245 claims and to verify the 221 references still open.
- Probably not a substantial claim. 43
- It may state two separate claims as one. 98
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“On the other hand, shared mobility can lead to higher utilization of each vehicle, which means a more efficient use of materials [341].”
From Tackling climate change with machine learning (2023) · cites this paper as [341]
In the citing paper
“AM (3-D printing) can produce lighter parts in vehicles, such as road vehicles and aircraft, that reduce energy consumption [341,407].”
From Tackling climate change with machine learning (2023) · cites this paper as [341]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > The state of evidence Evaluation of ME strategies
“For light-weighting of buildings, there is also limited evidence but a strong agreement about a substantial potential for emission reductions in the construction phase with few trade-offs.”
§ Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics-a review > Conclusions
“| | Light-weight design | ↓19 [16]-50% [71] | -↑ | ↓ - | MH | ◊ Conventions, labor costs |”
Citations
Cites
Change, I. P. O. C. (2015) · Cambridge University Press eBooks · doi:10.1017/cbo9781107415416 · Cited by 4,693
E-waste: An assessment of global production and environmental impacts
Robinson, B. H. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.09.044 · Cited by 1,777
Comparative Environmental Life Cycle Assessment of Conventional and Electric Vehicles
Hawkins, T. R., Singh, B., Majeau‐Bettez, G., & Strømman, A. H. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00532.x · Cited by 1,670
Climate change 2014 : mitigation of climate change
Edenhofer, O., Pichs-Madruga, R., & Sokona, Y. (2014) · University of North Texas Digital Library (University of North Texas) · Cited by 1,637
Monteiro, P. J. M., Miller, S. A., & Horvath, A. (2017) · Nature Materials · doi:10.1038/nmat4930 · Cited by 1,454
Life cycle energy analysis of buildings: An overview
Ramesh, T., Prakash, R., & Shukla, K. K. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.05.007 · Cited by 1,408
Energy use in the life cycle of conventional and low-energy buildings: A review article
Sartori, I., & Hestnes, A. G. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2006.07.001 · Cited by 1,284
Zink, T., & Geyer, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12545 · Cited by 1,210
(2010) · Encyclopedia of Geography · doi:10.4135/9781412939591.n1196 · Cited by 1,191
Grubler, A., Wilson, C., Bento, N., Boza-Kiss, B., Krey, V., McCollum, D. L., Rao, N. D., Riahi, K., Rogelj, J., De Stercke, S., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0172-6 · Cited by 1,178
Energy Technology Perspectives 2020
International Energy Agency (2020) · OECD eBooks · doi:10.1787/ab43a9a5-en · Cited by 1,062
Stadler, K., Wood, R., Bulavskaya, T., Södersten, C., Simas, M., Schmidt, S., Usubiaga, A., Acosta‐Fernández, J., Kuenen, J., Bruckner, M., et al. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12715 · Cited by 1,024
How are WEEE doing? A global review of the management of electrical and electronic wastes
Ongondo, F. O., Williams, I. D., & Cherrett, T. J. (2011) · Waste Management · doi:10.1016/j.wasman.2010.10.023 · Cited by 931
Material efficiency: A white paper
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.11.002 · Cited by 927
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Self-citationLife Cycle Assessment of Metals: A Scientific Synthesis
Nuss, P., & Eckelman, M. J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0101298 · Cited by 777
Krausmann, F., Wiedenhofer, D., Lauk, C., Haas, W., Tanikawa, H., Fishman, T., Miatto, A., Schandl, H., & Haberl, H. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1613773114 · Cited by 710
Self-citationThe Rebound Effect and Energy Efficiency Policy
Gillingham, K., Rapson, D., & Wagner, G. (2016) · Review of Environmental Economics and Policy · doi:10.1093/reep/rev017 · Cited by 672
International Energy Agency (2015) · World Energy Outlook · doi:10.1787/weo-2015-en · Cited by 630
Global Lithium Availability: A Constraint for Electric Vehicles?
Gruber, P. W., Medina, P. A., Keoleian, G. A., Kesler, S. E., Everson, M. P., & Wallington, T. J. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00359.x · Cited by 620
Jaillon, L., Poon, C. S., & Chiang, Y. H. (2009) · Waste Management · doi:10.1016/j.wasman.2008.02.015 · Cited by 592
Environmental assessment of passenger transportation should include infrastructure and supply chains
Chester, M. V., & Horvath, A. (2009) · Environmental Research Letters · doi:10.1088/1748-9326/4/2/024008 · Cited by 592
Cost-based analysis of autonomous mobility services
Bösch, P. M., Becker, F., Becker, H., & Axhausen, K. W. (2018) · Transport Policy · doi:10.1016/j.tranpol.2017.09.005 · Cited by 585
Dunn, J. B., Gaines, L., Kelly, J. C., James, C., & Gallagher, K. G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03029j · Cited by 561
A looming tragedy of the sand commons
Torres, A., Brandt, J., Lear, K., & Liu, J. (2017) · Science · doi:10.1126/science.aao0503 · Cited by 550
Global scenarios of urban density and its impacts on building energy use through 2050
Güneralp, B., Zhou, Y., Ürge-Vorsatz, D., Gupta, M., Yu, S., Patel, P. L., Fragkias, M., Li, X., & Seto, K. C. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1606035114 · Cited by 543
Meta-analysis of greenhouse gas displacement factors of wood product substitution
Sathre, R., & O’Connor, J. (2010) · Environmental Science & Policy · doi:10.1016/j.envsci.2009.12.005 · Cited by 537
Mao, C., Shen, Q., Shen, L., & Tang, L. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.07.033 · Cited by 513
Stock dynamics for forecasting material flows—Case study for housing in The Netherlands
B. Müller, D. (2006) · Ecological Economics · doi:10.1016/j.ecolecon.2005.09.025 · Cited by 513
Reducing waste: repair, recondition, remanufacture or recycle?
King, A. M., Burgess, S. C., Ijomah, W., & McMahon, C. A. (2006) · Sustainable Development · doi:10.1002/sd.271 · Cited by 502
Firnkorn, J., & Müller, M. (2011) · Ecological Economics · doi:10.1016/j.ecolecon.2011.03.014 · Cited by 496
Eco-efficiency gains from remanufacturing
Kerr, W., & Ryan, C. (2001) · Journal of Cleaner Production · doi:10.1016/s0959-6526(00)00032-9 · Cited by 451
Sustainable materials with both eyes open
(2013) · Choice Reviews Online · doi:10.5860/choice.50-3871 · Cited by 434
Autonomous taxis could greatly reduce greenhouse-gas emissions of US light-duty vehicles
Greenblatt, J. B., & Saxena, S. (2015) · Nature Climate Change · doi:10.1038/nclimate2685 · Cited by 419
Urban stock over time: spatial material stock analysis using 4d-GIS
Tanikawa, H., & Hashimoto, S. (2009) · Building Research & Information · doi:10.1080/09613210903169394 · Cited by 403
Chastas, P., Theodosiou, T., & Bikas, D. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.040 · Cited by 400
Energy Technology Perspectives 2017: Catalysing Energy Technology Transformations
International Energy Agency (2017) · Energy Technology Perspectives · doi:10.1787/energy_tech-2017-en · Cited by 375
Autonomous vehicles: The next jump in accessibilities?
Meyer, J., Becker, H., Bösch, P. M., & Axhausen, K. W. (2017) · Research in Transportation Economics · doi:10.1016/j.retrec.2017.03.005 · Cited by 371
The Energy and Carbon Footprint of the Global ICT and E&M Sectors 2010–2015
Malmodin, J., & Lundén, D. (2018) · Sustainability · doi:10.3390/su10093027 · Cited by 365
The growing importance of scope 3 greenhouse gas emissions from industry
Hertwich, E. G., & Wood, R. (2018) · Environmental Research Letters · doi:10.1088/1748-9326/aae19a · Cited by 350
Self-citationThe Environmental Impacts of Reuse: A Review
Cooper, D. R., & Gutowski, T. G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12388 · Cited by 337
Shen, Y., Zhang, H., & Zhao, J. (2018) · Transportation Research Part A: Policy and Practice · doi:10.1016/j.tra.2018.04.004 · Cited by 330
The economics of cell phone reuse and recycling
Geyer, R., & Doctori Blass, V. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2228-z · Cited by 318
Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310
Does WEEE recycling make sense from an environmental perspective?
Hischier, R., Wäger, P., & Gauglhofer, J. (2005) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2005.04.003 · Cited by 301
Mapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods
Cullen, J. M., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es304256s · Cited by 296
Industrial ecology in integrated assessment models
Pauliuk, S., Arvesen, A., Stadler, K., & Hertwich, E. G. (2017) · Nature Climate Change · doi:10.1038/nclimate3148 · Cited by 288
Self-citationHuang, T., Shi, F., Tanikawa, H., Fei, J., & Han, J. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2012.12.013 · Cited by 269
Toward a Resource‐Efficient Built Environment: A Literature Review and Conceptual Model
Ness, D. A., & Xing, K. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12586 · Cited by 268
Remanufacturing and Energy Savings
Gutowski, T. G., Sahni, S., Boustani, A., & Graves, S. C. (2011) · Environmental Science & Technology · doi:10.1021/es102598b · Cited by 260
The Roles of Energy and Material Efficiency in Meeting Steel Industry CO 2 Targets
Milford, R. L., Pauliuk, S., Allwood, J. M., & Müller, D. B. (2013) · Environmental Science & Technology · doi:10.1021/es3031424 · Cited by 254
Self-citationAn international comparative study of end-of-life vehicle (ELV) recycling systems
Sakai, S.-I., Yoshida, H., Hiratsuka, J., Vandecasteele, C., Kohlmeyer, R., Rotter, V. S., Passarini, F., Santini, A., Peeler, M., Li, J., et al. (2014) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-013-0173-2 · Cited by 250
Carbon stored in human settlements: the conterminous United States
CHURKINA, G., BROWN, D. G., & KEOLEIAN, G. (2010) · Global Change Biology · doi:10.1111/j.1365-2486.2009.02002.x · Cited by 248
How Will Copper Contamination Constrain Future Global Steel Recycling?
Daehn, K. E., Cabrera Serrenho, A., & Allwood, J. M. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b00997 · Cited by 242
Life cycle assessment of construction and demolition waste management
Butera, S., Christensen, T. H., & Astrup, T. F. (2015) · Waste Management · doi:10.1016/j.wasman.2015.07.011 · Cited by 240
Ethics of Consumption: The Good Life, Justice, and Global Stewardship
Murphy, J., Crocker, D. A., & Linden, T. (2000) · Contemporary Sociology · doi:10.2307/2654581 · Cited by 236
Wiedenhofer, D., Steinberger, J. K., Eisenmenger, N., & Haas, W. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12216 · Cited by 234
Carbon, Fossil Fuel, and Biodiversity Mitigation With Wood and Forests
Oliver, C. D., Nassar, N. T., Lippke, B. R., & McCarter, J. B. (2014) · Journal of Sustainable Forestry · doi:10.1080/10549811.2013.839386 · Cited by 234 · cited 3×
“Oliver et al [76] find it feasible to replace 10% of construction materials, resulting in substantial CO2 emission reductions.”
BackgroundInfluentialPetersen, A. K., & Solberg, B. (2005) · Forest Policy and Economics · doi:10.1016/s1389-9341(03)00063-7 · Cited by 222
Recycling of WEEE plastics: a review
Buekens, A., & Yang, J. (2014) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-014-0241-2 · Cited by 220
Quale, J., Eckelman, M. J., Williams, K. W., Sloditskie, G., & Zimmerman, J. B. (2012) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00424.x · Cited by 220
Heeren, N., & Hellweg, S. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12739 · Cited by 218
Self-citationGawron, J. H., Keoleian, G. A., De Kleine, R. D., Wallington, T. J., & Kim, H. C. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04576 · Cited by 217
Wäger, P. A., Hischier, R., & Eugster, M. (2011) · Science of The Total Environment · doi:10.1016/j.scitotenv.2011.01.050 · Cited by 210
Impact of lifetime on US residential building LCA results
Aktas, C. B., & Bilec, M. M. (2012) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0363-x · Cited by 208
Environmental life cycle assessment of coarse natural and recycled aggregates for concrete
Estanqueiro, B., Dinis Silvestre, J., de Brito, J., & Duarte Pinheiro, M. (2018) · European Journal of Environmental and Civil Engineering · doi:10.1080/19648189.2016.1197161 · Cited by 206
Sutherland, J. W., Adler, D. P., Haapala, K. R., & Kumar, V. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.004 · Cited by 205
Ellingsen, L. A.-W., Hung, C. R., & Strømman, A. H. (2017) · Transportation Research Part D: Transport and Environment · doi:10.1016/j.trd.2017.06.028 · Cited by 205
Printed wiring boards for mobile phones: Characterization and recycling of copper
Kasper, A. C., Berselli, G. B. T., Freitas, B. D., Tenório, J. A. S., Bernardes, A. M., & Veit, H. M. (2011) · Waste Management · doi:10.1016/j.wasman.2011.08.013 · Cited by 204
Iacovidou, E., & Purnell, P. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.03.098 · Cited by 200
Projection of Construction and Demolition Waste in Norway
Bergsdal, H., Bohne, R. A., & Brattebø, H. (2007) · Journal of Industrial Ecology · doi:10.1162/jiec.2007.1149 · Cited by 197
Cost, Energy, and Environmental Impact of Automated Electric Taxi Fleets in Manhattan
Bauer, G. S., Greenblatt, J. B., & Gerke, B. F. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04732 · Cited by 195
Energy Technology Perspectives 2015
International Energy Agency (2015) · Energy Technology Perspectives · doi:10.1787/energy_tech-2015-en · Cited by 191
Sandberg, N. H., Sartori, I., Heidrich, O., Dawson, R., Dascalaki, E., Dimitriou, S., Vimm-r, T., Filippidou, F., Stegnar, G., Šijanec Zavrl, M., et al. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.05.100 · Cited by 188
Environmental benefits from ridesharing: A case of Beijing
Yu, B., Ma, Y., Xue, M., Tang, B., Wang, B., Yan, J., & Wei, Y.-M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.052 · Cited by 184
Small WEEE: Determining recyclables and hazardous substances in plastics
Dimitrakakis, E., Janz, A., Bilitewski, B., & Gidarakos, E. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.04.054 · Cited by 181
Carbon implications of end-of-life management of building materials
Dodoo, A., Gustavsson, L., & Sathre, R. (2009) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2008.12.007 · Cited by 181
Hashimoto, S., Tanikawa, H., & Moriguchi, Y. (2007) · Waste Management · doi:10.1016/j.wasman.2006.10.009 · Cited by 179
Comparing environmental impacts of renovated housing stock with new construction
Itard, L., & Klunder, G. (2007) · Building Research & Information · doi:10.1080/09613210601068161 · Cited by 173
Uncertain Environmental Footprint of Current and Future Battery Electric Vehicles
Cox, B., Mutel, C. L., Bauer, C., Mendoza Beltran, A., & van Vuuren, D. P. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b00261 · Cited by 173
Material efficiency: providing material services with less material production
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2013) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2012.0496 · Cited by 172
Iron and steel in Chinese residential buildings: A dynamic analysis
Hu, M., Pauliuk, S., Wang, T., Huppes, G., van der Voet, E., & Müller, D. B. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2009.10.016 · Cited by 165
Self-citationLessons learned – Review of LCAs for ICT products and services
Arushanyan, Y., Ekener-Petersen, E., & Finnveden, G. (2014) · Computers in Industry · doi:10.1016/j.compind.2013.10.003 · Cited by 161
Does the Circular Economy Grow the Pie? The Case of Rebound Effects From Smartphone Reuse
Makov, T., & Font Vivanco, D. (2018) · Frontiers in Energy Research · doi:10.3389/fenrg.2018.00039 · Cited by 160
Re-engineering Manufacturing for Sustainability
Nee, A. Y. C., Song, B., & Ong, S. K. (2013) · Springer eBooks · doi:10.1007/978-981-4451-48-2 · Cited by 158
Gao, D., Zhang, L., & Nokken, M. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.006 · Cited by 157
Ma, Y., Rong, K., Mangalagiu, D., Thornton, T. F., & Zhu, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.323 · Cited by 157
Resource Efficiency: Potential and Economic Implications
Ekins, P., Hughes, N., Brigenzu, S., Clark, C., Fischer‐Kowalski, M., Graedel, T. E., Hajer, M. A., Hashimoto, S., Hatfield–Dodds, S., Havlík, P., et al. (2016) · IIASA PURE (International Institute of Applied Systems Analysis) · Cited by 156
Self-citationGlobal Patterns and Trends for Non‐Metallic Minerals used for Construction
Miatto, A., Schandl, H., Fishman, T., & Tanikawa, H. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12471 · Cited by 154
Self-citationLife cycle assessment of the end-of-life phase of a residential building
Vitale, P., Arena, N., Di Gregorio, F., & Arena, U. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.002 · Cited by 153
Fraj, A. B., & Idir, R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.059 · Cited by 144
Is gravel becoming scarce? Evaluating the local criticality of construction aggregates
Ioannidou, D., Meylan, G., Sonnemann, G., & Habert, G. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.016 · Cited by 142
Utilization of structural steel in buildings
Moynihan, M. C., & Allwood, J. M. (2014) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2014.0170 · Cited by 141
Koezjakov, A., Ürge-Vorsatz, D., Crijns-Graus, W. H. J., & van den Broek, M. A. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.01.036 · Cited by 141
The Growth of Urban Building Stock: Unintended Lock‐in and Embedded Environmental Effects
Reyna, J. L., & Chester, M. V. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12211 · Cited by 140
Modaresi, R., Pauliuk, S., Løvik, A. N., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es502930w · Cited by 137
Self-citationLong-Term Strategies for Increased Recycling of Automotive Aluminum and Its Alloying Elements
Løvik, A. N., Modaresi, R., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es405604g · Cited by 136
An investigation on the recycling of hydrated cement from concrete demolition waste
Gastaldi, D., Canonico, F., Capelli, L., Buzzi, L., Boccaleri, E., & Irico, S. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.04.010 · Cited by 135
Building stock dynamics and its impacts on materials and energy demand in China
Hong, L., Zhou, N., Feng, W., Khanna, N. Z., Fridley, D. G., Zhao, Y., & Sandholt, K. (2016) · Energy Policy · doi:10.1016/j.enpol.2016.03.024 · Cited by 134
Environmental Impact of Buildings─What Matters?
Heeren, N., Mutel, C. L., Steubing, B., Ostermeyer, Y., Wallbaum, H., & Hellweg, S. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01735 · Cited by 128
Self-citationSandin, G., Peters, G. M., & Svanström, M. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0686-x · Cited by 128
Contribution to resource conservation by reuse of electrical and electronic household appliances
Truttmann, N., & Rechberger, H. (2006) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2006.02.003 · Cited by 126
The Role of Material Efficiency in Environmental Stewardship
Worrell, E., Allwood, J., & Gutowski, T. (2016) · Annual Review of Environment and Resources · doi:10.1146/annurev-environ-110615-085737 · Cited by 126
Opportunities for a circular economy in the Netherlands
Bastein, A. G. T. M., Roelofs, E. M. G., Rietveld, E., & Hoogendoorn, A. (2013) · TNO Repository · Cited by 126
Short-Lived Buildings in China: Impacts on Water, Energy, and Carbon Emissions
Cai, W., Wan, L., Jiang, Y., Wang, C., & Lin, L. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02333 · Cited by 125
Guest, G., Bright, R. M., Cherubini, F., & Strømman, A. H. (2013) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2013.05.002 · Cited by 119
Chester, M. V., Horvath, A., & Madanat, S. (2010) · Atmospheric Environment · doi:10.1016/j.atmosenv.2009.12.012 · Cited by 119
Reusing Steel and Aluminum Components at End of Product Life
Cooper, D. R., & Allwood, J. M. (2012) · Environmental Science & Technology · doi:10.1021/es301093a · Cited by 118
Hiete, M., Stengel, J., Ludwig, J., & Schultmann, F. (2011) · Building Research & Information · doi:10.1080/09613218.2011.576849 · Cited by 116
Vats, M. C., & Singh, S. K. (2015) · Waste Management · doi:10.1016/j.wasman.2015.06.002 · Cited by 114
Smart steel: new paradigms for the reuse of steel enabled by digital tracking and modelling
Ness, D., Swift, J., Ranasinghe, D. C., Xing, K., & Soebarto, V. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.08.055 · Cited by 113
Simion, I. M., Fortuna, M. E., Bonoli, A., & Gavrilescu, M. (2013) · Journal of Environmental Engineering and Landscape Management · doi:10.3846/16486897.2013.852558 · Cited by 111
Carbon stored in human settlements: the conterminous United States
N, R. K. E. O. L. E. I. A. (2010) · Cited by 108
An Analysis of the Eco‐Efficiency of Remanufactured Personal Computers and Mobile Phones
Quariguasi‐Frota‐Neto, J., & Bloemhof, J. (2012) · Production and Operations Management · doi:10.1111/j.1937-5956.2011.01234.x · Cited by 107
Sverdrup, H. U., Koca, D., & Schlyter, P. (2017) · BioPhysical Economics and Resource Quality · doi:10.1007/s41247-017-0023-2 · Cited by 107
Changing patterns and determinants of infrastructures’ material stocks in Chinese cities
Huang, C., Han, J., & Chen, W. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.06.014 · Cited by 106
Appraising the environmental benefits of ride-sharing: The Paris region case study
Yin, B., Liu, L., Coulombel, N., & Viguié, V. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.186 · Cited by 106
Impact of building service life models on life cycle assessment
Grant, A., & Ries, R. (2013) · Building Research & Information · doi:10.1080/09613218.2012.730735 · Cited by 103
Pauliuk, S., Sjöstrand, K., & Müller, D. B. (2013) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2012.00571.x · Cited by 102
Self-citationAre scarce metals in cars functionally recycled?
Andersson, M., Ljunggren Söderman, M., & Sandén, B. A. (2017) · Waste Management · doi:10.1016/j.wasman.2016.06.031 · Cited by 101
Wolfram, P., & Wiedmann, T. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.219 · Cited by 99
Self-citationGlobal EV Outlook 2019: Scaling-up the transition to electric mobility
International Energy Agency (2019) · Global EV Outlook · doi:10.1787/35fb60bd-en · Cited by 99
From Waste Management to Component Management in the Construction Industry
Rose, C., & Stegemann, J. (2018) · Sustainability · doi:10.3390/su10010229 · Cited by 97
Hashimoto, S., Tanikawa, H., & Moriguchi, Y. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.011 · Cited by 96
Nakamura, S., Kondo, Y., Nakajima, K., Ohno, H., & Pauliuk, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b01683 · Cited by 96
Self-citationAssessing the End-of-Life Impacts of Buildings
Vieira, P. S., & Horvath, A. (2008) · Environmental Science & Technology · doi:10.1021/es071345l · Cited by 95
Methodology for the survival analysis of urban building stocks
Erik Bradley, P., & Kohler, N. (2007) · Building Research & Information · doi:10.1080/09613210701266939 · Cited by 95
Nakajima, K., Ohno, H., Kondo, Y., Matsubae, K., Takeda, O., Miki, T., Nakamura, S., & Nagasaka, T. (2013) · Environmental Science & Technology · doi:10.1021/es3043559 · Cited by 95
Nakamura, S., Kondo, Y., Matsubae, K., Nakajima, K., Tasaki, T., & Nagasaka, T. (2012) · Environmental Science & Technology · doi:10.1021/es3013529 · Cited by 95
The service economy: ‘wealth without resource consumption’?
Stahel, W. R. (1997) · Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.1997.0058 · Cited by 93
Moorthy, A., De Kleine, R., Keoleian, G., Good, J., & Lewis, G. (2017) · SAE International Journal of Passenger Cars - Electronic and Electrical Systems · doi:10.4271/2017-01-1276 · Cited by 93
Kim, H.-J., Keoleian, G. A., & Skerlos, S. J. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00288.x · Cited by 92 · cited 1×
“Light-weight design ↓5%–45% steel [16, 207] ↓ ↓ MH ◊Costs”
Cooper, D., Rossie, K. E., & Gutowski, T. G. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.01.010 · Cited by 91
Dunant, C. F., Drewniok, M. P., Sansom, M., Corbey, S., Cullen, J. M., & Allwood, J. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.141 · Cited by 91
Dhingra, R., & Das, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.08.107 · Cited by 90 · cited 1×
“Recycling ↓10%–38%vehicle [152, 208] — −↓ MH ◊ Sorting and separation”
Material Resources, Productivity and the Environment
OECD (2015) · OECD Green Growth Studies · doi:10.1787/9789264190504-en · Cited by 90
Schandl, H., Fischer‐Kowalski, M., West, J., Giljum, S., Dittrich, M.-A., Eisenmenger, N., Geschke, A., Lieber, M., Wieland, H., Schaffartzik, A., et al. (2017) · Cited by 88
Self-citationReal and perceived barriers to steel reuse across the UK construction value chain
Dunant, C. F., Drewniok, M. P., Sansom, M., Corbey, S., Allwood, J. M., & Cullen, J. M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.036 · Cited by 88
The technical potential for reducing metal requirements through lightweight product design
Carruth, M. A., Allwood, J. M., & Moynihan, M. C. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.09.018 · Cited by 86
120 Years of U.S. Residential Housing Stock and Floor Space
Moura, M. C. P., Smith, S. J., & Belzer, D. B. (2015) · PLOS ONE · doi:10.1371/journal.pone.0134135 · Cited by 83
Knoeri, C., Wäger, P. A., Stamp, A., Althaus, H.-J., & Weil, M. (2013) · Science of The Total Environment · doi:10.1016/j.scitotenv.2013.02.001 · Cited by 83
Role of Motor Vehicle Lifetime Extension in Climate Change Policy
Kagawa, S., Nansai, K., Kondo, Y., Hubacek, K., Suh, S., Minx, J., Kudoh, Y., Tasaki, T., & Nakamura, S. (2011) · Environmental Science & Technology · doi:10.1021/es1034552 · Cited by 83
Influence of Input‐Scrap Quality on the Environmental Impact of Secondary Steel Production
Haupt, M., Vadenbo, C., Zeltner, C., & Hellweg, S. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12439 · Cited by 83 · cited 2×
“Haupt et al [107] estimated that ‘sweetening’ low quality steel scrap requires about 1.4 times more energy than high quality steel scrap.”
BackgroundInfluentialReusing concrete panels from buildings for building: Potential in Finnish 1970s mass housing
Huuhka, S., Kaasalainen, T., Hakanen, J. H., & Lahdensivu, J. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.05.017 · Cited by 82
A Probabilistic Dynamic Material Flow Analysis Model for Chinese Urban Housing Stock
Cao, Z., Shen, L., Zhong, S., Liu, L., Kong, H., & Sun, Y. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12579 · Cited by 82
Palmieri, R., Bonifazi, G., & Serranti, S. (2014) · Waste Management · doi:10.1016/j.wasman.2014.06.003 · Cited by 79
Coughlan, D., Fitzpatrick, C., & McMahon, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.029 · Cited by 79
Metal Dissipation and Inefficient Recycling Intensify Climate Forcing
Ciacci, L., Harper, E. M., Nassar, N. T., Reck, B. K., & Graedel, T. E. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b02714 · Cited by 78
Self-citationCozzi, L., Turk, D. J., Abergel, T., Bartoš, J., Bellevrat, E., Bennett, S., Berly, T., Bouckaert, S., Dulac, J., Alvarez, C. F., et al. (2017) · Cited by 78
Self-citationKagawa, S., Hubacek, K., Nansai, K., Kataoka, M., Managi, S., Suh, S., & Kudoh, Y. (2013) · Global Environmental Change · doi:10.1016/j.gloenvcha.2013.07.023 · Cited by 75
Stocks, Flows, and Distribution of Critical Metals in Embedded Electronics in Passenger Vehicles
Restrepo, E., Løvik, A. N., Wäger, P., Widmer, R., Lonka, R., & Müller, D. B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b05743 · Cited by 71
Material savings through structural steel reuse: A case study in Genoa
Pongiglione, M., & Calderini, C. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.02.011 · Cited by 69
International Energy Agency (2017) · doi:10.1787/9789264286276-en · Cited by 69
Ohno, H., Matsubae, K., Nakajima, K., Kondo, Y., Nakamura, S., Fukushima, Y., & Nagasaka, T. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b04477 · Cited by 67
Kayo, C., Dente, S. M. R., Aoki‐Suzuki, C., Tanaka, D., Murakami, S., & Hashimoto, S. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12766 · Cited by 65
Valorisation of recycled concrete sands in cement raw meal for cement production
Diliberto, C., Lecomte, A., Mechling, J.-M., Izoret, L., & Smith, A. (2017) · Materials and Structures · doi:10.1617/s11527-017-0996-8 · Cited by 64
Cascade Use and the Management of Product Lifecycles
Kalverkamp, M., Pehlken, A., & Wuest, T. (2017) · Sustainability · doi:10.3390/su9091540 · Cited by 64
Estimating the Material Stock of Roads: The Vietnamese Case Study
Nguyen, T. C., Fishman, T., Miatto, A., & Tanikawa, H. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12773 · Cited by 64
Self-citationComparative emission analysis of low-energy and zero-emission buildings
Kristjansdottir, T. F., Heeren, N., Andresen, I., & Brattebø, H. (2018) · Building Research & Information · doi:10.1080/09613218.2017.1305690 · Cited by 63
Self-citation(2009) · doi:10.1787/20725302 · Cited by 62
Briefing: Reuse and recycling rates of UK steel demolition arisings
Sansom, M., & Avery, N. (2014) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/ensu.13.00026 · Cited by 60
Macroscopic Evidence for the Hibernating Behavior of Materials Stock
Daigo, I., Iwata, K., Ohkata, I., & Goto, Y. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01164 · Cited by 60
Huisman, J., Botezatu, I., Herreras, L., Liddane, M., Hintsa, J., di Cortemiglia, V. L., Leroy, P., Vermeersch, E., Mohanty, S., van den Brink, S., et al. (2015) · UNU Collections (United Nations University) · doi:10.13140/rg.2.1.4864.2328 · Cited by 58
Life cycle assessment of automotive lightweighting through polymers under US boundary conditions
Koffler, C. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-013-0652-7 · Cited by 57
Worldwide Greenhouse Gas Reduction Potentials in Transportation by 2050
Taptich, M. N., Horvath, A., & Chester, M. V. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12391 · Cited by 57
Application of energy and CO2 reduction assessments for end-of-life vehicles recycling in Japan
Sato, F. E. K., Furubayashi, T., & Nakata, T. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.002 · Cited by 57
The impact of ‘Cash for Clunkers’ on greenhouse gas emissions: a life cycle perspective
Lenski, S. M., Keoleian, G. A., & Bolon, K. M. (2010) · Environmental Research Letters · doi:10.1088/1748-9326/5/4/044003 · Cited by 51
Working Paper: The Persistent Decline in Urban Densities: Global and Historical Evidence of Sprawl
Angel, S., Parent, J. R., Civco, D. L., & Blei, A. M. (2009) · Cited by 49
Life Cycle Assessment of the Mobile Communication System UMTS: Towards Eco-efficient Systems (12 pp)
Faist Emmenegger, M., Frischknecht, R., Stutz, M., Guggisberg, M., Witschi, R., & Otto, T. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2004.12.193 · Cited by 49
Consumption-Weighted Life Cycle Assessment of a Consumer Electronic Product Community
Ryen, E. G., Babbitt, C. W., & Williams, E. (2015) · Environmental Science & Technology · doi:10.1021/es505121p · Cited by 48
Critical factors affecting life cycle assessments of material choice for vehicle mass reduction
Hottle, T., Caffrey, C., McDonald, J., & Dodder, R. (2017) · Transportation Research Part D: Transport and Environment · doi:10.1016/j.trd.2017.08.010 · Cited by 48
Bridging the climate mitigation gap with economy‐wide material productivity
Scott, K., Giesekam, J., Barrett, J., & Owen, A. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12831 · Cited by 47
Exploring built environment stock metabolism and sustainability by systems analysis approaches
Brattebø, H., Bergsdal, H., Sandberg, N. H., Hammervold, J., & Müller, D. B. (2009) · Building Research & Information · doi:10.1080/09613210903186901 · Cited by 46
Cao, Z., Liu, G., Zhong, S., Dai, H., & Pauliuk, S. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.8b03633 · Cited by 44
Self-citationWhat Do We Know About Metal Recycling Rates?
Graedel, T. E., Allwood, J., Birat, J.-P., Buchert, M., Hagelüken, C., Reck, B. K., Sibley, S. F., & Sonnemann, G. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00342.x · Cited by 43
Economic and environmental characteristics of global cellular telephone remanufacturing
Skerlos, S. J., Morrow, W. R., Chan, K.-Y., Zhao, F., Hula, A., Seliger, G., Basdere, B., & Prasitnarit, A. (2003) · IEEE International Symposium on Electronics and the Environment, 2003. · doi:10.1109/isee.2003.1208055 · Cited by 42
Energy savings through direct secondary reuse: an exemplary analysis of the German automotive sector
McKenna, R., Reith, S., Cail, S., Kessler, A., & Fichtner, W. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.02.032 · Cited by 42
Life cycle assessment of thin-wall ductile cast iron for automotive lightweighting applications
Jhaveri, K., Lewis, G. M., Sullivan, J. L., & Keoleian, G. A. (2018) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2018.01.002 · Cited by 41
LIFE TIME ESTIMATIONS OF JAPANESE BUILDINGS AND HOUSES AT THE YEARS OF 1997 AND 2005
KOMATSU, Y. (2008) · Journal of Architecture and Planning (Transactions of AIJ) · doi:10.3130/aija.73.2197 · Cited by 39
Transitions to material efficiency in the UK steel economy
Allwood, J. M. (2013) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2011.0577 · Cited by 38
Material Stock Demographics: Cars in Great Britain
Cabrera Serrenho, A., & Allwood, J. M. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b05012 · Cited by 38
Park, P.-J., Lee, K.-M., & Wimmer, W. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2005.05.205 · Cited by 36
Life cycle assessment of the mobile communication system UMTS: towards eco-efficient systems
Stutz, M., Emmenegger, M. F., Frischknecht, R., Guggisberg, M., Witschi, R., & Otto, T. (2003) · IEEE International Symposium on Electronics and the Environment (ISEE) · doi:10.1109/isee.2003.1208063 · Cited by 35
Use, Storage, and Disposal of Electronic Equipment in Switzerland
Thiébaud, E., Hilty, L. M., Schluep, M., & Faulstich, M. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b06336 · Cited by 34
Gutowski, T., Cooper, D., & Sahni, S. (2017) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2016.0368 · Cited by 34
(2006) · Cited by 33
Leveraging material efficiency as an energy and climate instrument for heavy industries in the EU
Hernandez, A. G., Cooper-Searle, S., Skelton, A. C. H., & Cullen, J. M. (2018) · Energy Policy · doi:10.1016/j.enpol.2018.05.055 · Cited by 32
Polverini, D., Ardente, F., Sanchez, I., Mathieux, F., Tecchio, P., & Beslay, L. (2018) · Computers & Security · doi:10.1016/j.cose.2017.12.001 · Cited by 28
Dynamic-MFA examination of Chilean housing stock: long-term changes and earthquake damage
Gallardo, C., Sandberg, N. H., & Brattebø, H. (2014) · Building Research & Information · doi:10.1080/09613218.2014.872547 · Cited by 26
Lucas, A., Neto, R. C., & Silva, C. A. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.04.127 · Cited by 23 · cited 1×
“With the expected electrification of fleets, the demand for lithium (Li) batteries [177] and charging infrastructure [178] will increase material-related energy requirements.”
BackgroundFischedick, M., Roy, J., Acquaye, A. A., Allwood, J. M., Céron, J.-P., Geng, Y., Kheshgi, H. S., Lanza, A., Perczyk, D., Price, L., et al. (2014) · Kent Academic Repository (University of Kent) · Cited by 23
Huang, R., Ulu, E., Kara, L. B., & Whitefoot, K. S. (2017) · Volume 2A: 43rd Design Automation Conference · doi:10.1115/detc2017-67836 · Cited by 22
Gu, H., & Bergman, R. (2018) · doi:10.2737/fpl-gtr-255 · Cited by 19
A high-level estimate of the material footprints of the ICT and the E&M sector
Malmodin, J., Bergmark, P., & Matinfar, S. (2018) · EPiC Series in Computing · doi:10.29007/q5fw · Cited by 16
All auto shredding: evaluation of automotive shredder residue generated by shredding only vehicles.
Duranceau, C. M., & Spangenberger, J. (2011) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1031450 · Cited by 14
An assessment of two environmental and economic benefits of ‘Cash for Clunkers’
Lenski, S. M., Keoleian, G. A., & Moore, M. R. (2013) · Ecological Economics · doi:10.1016/j.ecolecon.2013.10.011 · Cited by 12
LCA-Based Comparative Evaluation of Newly Manufactured and Remanufactured Diesel Engine
Liu, Z.-C., Jiang, Q.-H., & Zhang, H.-C. (2013) · Re-engineering Manufacturing for Sustainability · doi:10.1007/978-981-4451-48-2_108 · Cited by 9
Kane, M., & Yee, R. (2017) · Journal of Green Building · doi:10.3992/1552-6100.12.1.11 · Cited by 2
Research works printed but not linked: 7
- 5. Hashimoto S H and Moriguchi Y M 2013 Resource management for carbon management: a literature review Glob. Environ. Res. 17 39-46
- 9. G7. Communiqué 2017 G7 Bologna Environment Ministers' Meeting
- 48. IEA 2016 Annex E: buildings sector model Energy Technology Perspectives 2016 (Paris: International Energy Agency) p 27
- 55. Swilling M et al 2018 The Weight of Cities: Resource Requirements of Future Urbanization; International Resource Panel (Nairobi: United Nations Environment Programme)
- 76. Smith P et al 2014 Agriculture, forestry and other land use Climate Change 2014: Mitigation of Climate Change ed O Edenhofer et al (Geneva: Intergovernmental Panel on Climate Change)
- 117. 118International Energy Agency (IEA) CO 2 Emissions from Fuel Combustion Statistics (https://doi.org/10.1787/co2-data- en) (Accessed: 3 July 2018) · doi:10.1787/co2-data-
- 158. Nasr N Z, Russell J D, Kreiss C, Hilton B, Hellweg S, Bringezu S and von Gries N 2018 Assessment of resource efficiency and innovation in circular economy through remanufacturing, refurbishment Repair Direct Reuse
Cited by
A review of trends and drivers of greenhouse gas emissions by sector from 1990 to 2018
Lamb, W. F., Wiedmann, T., Pongratz, J., Andrew, R., Crippa, M., Olivier, J. G. J., Wiedenhofer, D., Mattioli, G., Khourdajie, A. A., House, J., et al. (2021) · Environmental Research Letters · doi:10.1088/1748-9326/abee4e · Cited by 1,183
Rissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
“by circular economy interventions [194,195].”
Self-citationDemand-side solutions to climate change mitigation consistent with high levels of well-being
Creutzig, F., Niamir, L., Bai, X., Callaghan, M., Cullen, J., Díaz-José, J., Figueroa, M., Grubler, A., Lamb, W. F., Leip, A., et al. (2022) · Nature Climate Change · doi:10.1038/s41558-021-01219-y · Cited by 579
Self-citationThe Materials Science behind Sustainable Metals and Alloys
Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 526
Zhong, X., Hu, M., Deetman, S., Steubing, B., Lin, H. X., Hernandez, G. A., Harpprecht, C., Zhang, C., Tukker, A., & Behrens, P. (2021) · Nature Communications · doi:10.1038/s41467-021-26212-z · Cited by 449
Metadata
- Authors
- Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., & Wolfram, P.
- Affiliations
- Yale University (US)
- University of Delaware (US)
- University of Bologna (IT)
- Reichman University (IL)
- Northwestern University (US)
- Massachusetts Institute of Technology (US)
- University of Freiburg (DE)
- ORCID
- Venue
- Environmental Research Letters
- Publisher
- IOP Publishing
- Published
- 2019-04-16
- Volume
- 14
- Issue
- 4
- Pages
- 043004
- ISSN
- 1748-9326 (ISSN-L)
- OpenAlex
- W2921283133
- Cited by
- 477
- References
- 199
- Citations by year
- 2026: 57 · 2025: 82 · 2024: 88 · 2023: 72 · 2022: 70 · 2021: 66 · 2020: 38 · 2019: 4
- FWCI
- 18.86
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- creativecommons.org/licenses/by/3.0/ (vor)
- Locations
- Environmental Research Letters (publishedVersion, cc-by)
- Archivio istituzionale della ricerca (Alma Mater Studiorum Università di Bologna) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- DSpace@MIT (Massachusetts Institute of Technology) (submittedVersion, cc-by-nc)
- INFM-OAR (INFN Catania) (submittedVersion, cc-by)
- Funders
- United Nations Environment
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Environmental Engineering › Sustainability and Ecological Systems Analysis
- Physical Sciences › Engineering › Building and Construction › Sustainable Design and Development
- Keywords
- material efficiency, greenhouse gas emissions, circular economy, buildings, vehicles, electronics, lightweight design, service life extension, material reuse and recycling, metal recovery, demolition waste, end-of-life vehicles, appliance recycling, metal sorting, life cycle assessment
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-28, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-28 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.