The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Additive manufacturing of polymer melts for implantable medical devices and scaffolds
Abstract
Melt processing is routinely used to fabricate medical polymeric devices/implants for clinical reconstruction and can be incorporated into quality systems procedures for medical device manufacture. As additive manufacturing (AM) becomes increasingly used for biomaterials and biofabrication, the translation of new, customizable, medical devices to the clinic becomes paramount. Melt processing is therefore a distinguishable group within AM that provides an avenue to manufacture scaffolds/implants with a clinical end-point. Three key melt processing AM technologies are highlighted in this review: melt micro-extrusion, selective laser sintering and melt electrospinning writing. The in vivo (including clinical) outcomes of medical devices and scaffolds made with these processes are reviewed. Together, they encompass the melt AM of scaffold architectures with feature sizes and resolutions ranging from 800 nm up to 700 μm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Feng, X., & McDonald, J. M. (2011) · Annual Review of Pathology: Mechanisms of Disease · doi:10.1146/annurev-pathol-011110-130203 · Cited by 1,272
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Self-citationPolymeric Biomaterials for Medical Implants and Devices
Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00429 · Cited by 778
Bone tissue engineering: from bench to bedside
Woodruff, M. A., Lange, C., Reichert, J., Berner, A., Chen, F., Fratzl, P., Schantz, J.-T., & Hutmacher, D. W. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70194-3 · Cited by 182
Plastics Used in Medical Devices
McKeen, L. W. (2014) · Handbook of Polymer Applications in Medicine and Medical Devices · doi:10.1016/b978-0-323-22805-3.00003-7 · Cited by 153
ADDITIVE MANUFACTURING AS A DISRUPTIVE TECHNOLOGY: IMPLICATIONS OF THREE-DIMENSIONAL PRINTING
Campbell, T. A., & Ivanova, O. S. (2013) · Technology & Innovation · doi:10.3727/194982413x13608676060655 · Cited by 62
Cited by
Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Bartnikowski, M., Dargaville, T. R., Ivanovski, S., & Hutmacher, D. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.004 · Cited by 769
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Wen, Y., Xun, S., Haoye, M., Baichuan, S., Peng, C., Xuejian, L., Kaihong, Z., Xuan, Y., Jiang, P., & Shibi, L. (2017) · Biomaterials Science · doi:10.1039/c7bm00315c · Cited by 302
Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering
Zhang, Y., Liu, X., Zeng, L., Zhang, J., Zuo, J., Zou, J., Ding, J., & Chen, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903279 · Cited by 294
Metadata
- Authors
- Youssef, A., Hollister, S. J., & Dalton, P. D.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-02-28
- Volume
- 9
- Issue
- 1
- Pages
- 012002
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2591864940
- Cited by
- 190
- References
- 9
- FWCI
- 14.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of polymer melts for implantable medical devices and scaffolds. https://app.cochat.ai/papers/10.1088/1758-5090/aa5766
- The paper
- Youssef, A., Hollister, S. J., & Dalton, P. D. (2017). Additive manufacturing of polymer melts for implantable medical devices and scaffolds. Biofabrication. https://doi.org/10.1088/1758-5090/aa5766
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.