3D cell-printing of tendon-bone interface using tissue-derived extracellular matrix bioinks for chronic rotator cuff repair
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The tendon-bone interface (TBI) in rotator cuffs exhibits a structural and compositional gradient integrated through the fibrocartilaginous transition. Owing to restricted healing capacity, functional regeneration of the TBI is considered a great clinical challenge. Here, we establish a novel therapeutic platform based on 3D cell-printing and tissue-specific bioinks to achieve spatially-graded physiology for functional TBI regeneration. The 3D cell-printed TBI patch constructs are created via a spatial arrangement of cell-laden tendon and bone-specific bioinks in a graded manner, approximating a multi-tissue fibrocartilaginous interface. This TBI patch offers a cell favorable microenvironment, including high cell viability, proliferative capacity, and zonal-specific differentiation of encapsulated stem cells for TBI formation in vitro . Furthermore, in vivo application of spatially-graded TBI patches with stem cells demonstrates their regenerative potential, indicating that repair with 3D cell-printed TBI patch significantly accelerates and promotes TBI healing in a rat chronic tear model. Therefore, our findings propose a new therapeutic strategy for functional TBI regeneration using 3D cell-printing and tissue-specific decellularized extracellular matrix bioink-based approach.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Engineered whole organs and complex tissues
Badylak, S. F., Weiss, D. J., Caplan, A., & Macchiarini, P. (2012) · The Lancet · doi:10.1016/s0140-6736(12)60073-7 · Cited by 417 · cited 1×
“We believed that this phenomenon may occur from a concurrent biomimetic approach and the co-existence of tissue-specific matrix components, growth factors, and/or signaling molecules [55].”
RetractedThe return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“PCL received FDA approval as a medical implant and drug delivery device, and is extensively used in the tissue engineering field in various organ/tissue types due to its excellent biocompatibility, biodegradability, and versatility [47].”
An overview of tissue and whole organ decellularization processes
Crapo, P. M., Gilbert, T. W., & Badylak, S. F. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.057 · Cited by 3,591
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · cited 7×
“Decellularized ECM (dECM) has been extensively used in tissue engineering and regenerative medicine [17, 18].”
InfluentialSelf-citationBioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465 · cited 1×
“Tissue-derived ECMs possess a complex composition of structural proteins and other bioactive molecules that intrinsically generate a tissue/organspecific microenvironment, which, in turn modulates cell behavior and function [18, 36].”
Self-citation3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298 · cited 1×
“First, PU_PCL was extruded at a temperature of 190 ◦ C with a pneumatic pressure of 530 kPa and a feed rate of 120 mm min − 1 to fabricate the framework containing an anchor-reinforced structure at both ends, as described previously [29, 30].”
Self-citationDas, S., Kim, S.-W., Choi, Y.-J., Lee, S., Lee, S.-H., Kong, J.-S., Park, H.-J., Cho, D.-W., & Jang, J. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.026 · Cited by 150
Self-citation"Tissue Papers" from organ-specific decellularized extracellular matrices
Jakus, A. E., Laronda, M. M., Rashedi, A. S., Robinson, C. M., Lee, C., Jordan, S. W., Orwig, K. E., Woodruff, T. K., & Shah, R. N. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700992 · Cited by 133
Cited by
Brown, M., Li, J., Moraes, C., Tabrizian, M., & Li-Jessen, N. Y. K. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121786 · Cited by 282
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Xu, P., Kankala, R. K., Wang, S., & Chen, A. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbad107 · Cited by 129
Metadata
- Authors
- Chae, S., Sun, Y., Choi, Y.-J., Ha, D.-H., Jeon, I., & Cho, D.-W.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2021-04-02
- Volume
- 13
- Issue
- 3
- Pages
- 035005
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W3112083816
- Cited by
- 91
- References
- 9
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D cell-printing of tendon-bone interface using tissue-derived extracellular matrix bioinks for chronic rotator cuff repair. https://app.cochat.ai/papers/10.1088/1758-5090/abd159
- The paper
- Chae, S., Sun, Y., Choi, Y.-J., Ha, D.-H., Jeon, I., & Cho, D.-W. (2021). 3D cell-printing of tendon-bone interface using tissue-derived extracellular matrix bioinks for chronic rotator cuff repair. Biofabrication. https://doi.org/10.1088/1758-5090/abd159
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.