A biofabrication method to align cells within bioprinted photocrosslinkable and cell-degradable hydrogel constructs via embedded fibers
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
The extracellular matrix (ECM) is composed of biochemical and biophysical cues that control cell behaviors and bulk mechanical properties. For example, anisotropy of the ECM and cell alignment are essential in the directional properties of tissues such as myocardium, tendon, and the knee meniscus. Technologies are needed to introduce anisotropic behavior into biomaterial constructs that can be used for the engineering of tissues as models and towards translational therapies. To address this, we developed an approach to align hydrogel fibers within cell-degradable bioink filaments with extrusion printing, where shear stresses during printing align fibers and photocrosslinking stabilizes the fiber orientation. Suspensions of hydrogel fibers were produced through the mechanical fragmentation of electrospun scaffolds of norbornene-modified hyaluronic acid, which were then encapsulated with meniscal fibrochondrocytes, mesenchymal stromal cells, or cardiac fibroblasts within gelatin-methacrylamide bioinks during extrusion printing into agarose suspension baths. Bioprinting parameters such as the needle diameter and the bioink flow rate influenced shear profiles, whereas the suspension bath properties and needle translation speed influenced filament diameters and uniformity. When optimized, filaments were formed with high levels of fiber alignment, which resulted in directional cell spreading during culture over one week. Controls that included bioprinted filaments without fibers or non-printed hydrogels of the same compositions either with or without fibers resulted in random cell spreading during culture. Further, constructs were printed with variable fiber and resulting cell alignment by varying print direction or using multi-material printing with and without fibers. This biofabrication technology advances our ability to fabricate constructs containing aligned cells towards tissue repair and the development of physiological tissue models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642 · cited 1×
“As has been demonstrated in previous studies, GelMA concentration impacted cell viability and morphology [35, 46].”
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Nerger, B. A., Brun, P.-T., & Nelson, C. M. (2019) · Soft Matter · doi:10.1039/c8sm02605j · Cited by 111 · cited 2×
“In previous studies to guide cell alignment, biofabrication techniques have often embedded and aligned collagen fibers during extrusion bioprinting, including as homogenous bioinks [10, 15, 22, 23] and as composite systems with HA, agarose, or pluronic hydrogels [10, 24, 25].”
Fiber density modulates cell spreading in 3D interstitial matrix mimetics
Matera, D. L., Wang, W. Y., Smith, M. R., Shikanov, A., & Baker, B. M. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00141 · Cited by 75 · cited 11×
“For example, there are numerous studies that report the production of soft fibrous materials from synthetic precursors, such as with the electrospinning of molecules such as dextran and hyaluronic acid (HA) [16–19], including composites of dextran fibers embedded in gelatinmethacrylamide (GelMA) hydrogels [1, 15].”
Influential
Research works printed but not linked: 57
- Grewal, 2021, Electrospun hydrogels for dynamic culture systems: advantages, progress, and opportunities, Biomat. Sci., 9, 4228, 10.1039/D0BM01588A · DOI
- Wade, 2015, Nanofibrous hydrogels with spatially patterned biochemical signals to control cell behavior, Adv. Mater., 27, 1356, 10.1002/adma.201404993 · DOI · Paper page
- Datta, 2019, Anisotropy properties of tissues: a basis for fabrication of biomimetic anisotropic scaffolds for tissue engineering, J. Bionic Eng., 16, 842, 10.1007/s42235-019-0101-9 · DOI
- Qu, 2018, Maturation state and matrix microstructure regulate interstitial cell migration in dense connective tissues, Sci. Rep., 8, 1, 10.1038/s41598-018-21212-4 · DOI
- Peng, 2011, Effect of cell anisotropy on differentiation of stem cells on micropatterned surfaces through the controlled single cell adhesion, Biomaterials, 32, 8048, 10.1016/j.biomaterials.2011.07.035 · DOI · Paper page
- Liu, 2020, Collagen microfibers induce blood capillary orientation and open vascular lumen, Adv. Biosyst., 4, 10.1002/adbi.202000038 · DOI
- Bansal, 2020, Structure, function, and defect tolerance with maturation of the radial tie fiber network in the knee meniscus, J. Orthop. Res., 38, 2709, 10.1002/jor.24697 · doi:10.1002/jor.24697
- Ugolini, 2016, On-chip assessment of human primary cardiac fibroblasts proliferative responses to uniaxial cyclic mechanical strain, Biotechnol. Bioeng., 113, 859, 10.1002/bit.25847 · DOI
- Sankar, 2018, Effect of patterned electrospun hierarchical structures on alignment and differentiation of mesenchymal stem cells: biomimicking bone, J. Tissue Eng. Regen. Med, 12, e2073, 10.1002/term.2640 · DOI
- Schwab, 2020, Tissue mimetic hyaluronan bioink containing collagen fibers with controlled orientation modulating cell migration and alignment, Mater. Today Bio, 7, 10058, 10.1016/j.mtbio.2020.100058 · DOI · Paper page
- Leijten, 2017, Spatially and temporally controlled hydrogels for tissue engineering, Mater. Sci. Eng. R, 119, 1, 10.1016/j.mser.2017.07.001 · DOI · Paper page
- Li, 2014, Engineering cell alignment in vitro, Biotechnol. Adv., 32, 347, 10.1016/j.biotechadv.2013.11.007 · DOI · Paper page
- Mirbagheri, 2019, Advanced cell culture platforms: a growing quest for emulating natural tissues, Mater. Horiz., 6, 45, 10.1039/C8MH00803E · DOI
- Vo, 2021, A simple method to align cells on 3D hydrogels using 3D printed molds, Biomed. Eng. Adv., 1, 100001, 10.1016/j.bea.2021.100001 · doi:10.1016/j.bea.2021.100001
- Davidson, 2020, Myofibroblast activation in synthetic fibrous matrices composed of dextran vinyl sulfone, Acta Biomater., 105, 78, 10.1016/j.actbio.2020.01.009 · DOI
- Ding, 2019, Electrospun polymer biomaterials, Prog. Polym. Sci., 90, 1, 10.1016/j.progpolymsci.2019.01.002 · DOI · Paper page
- Wade, 2015, Protease-degradable electrospun fibrous hydrogels, Nat. Commun., 6, 1, 10.1038/ncomms7639 · DOI · Paper page
- Davidson, 2020, Mechanochemical adhesion and plasticity in multifiber hydrogel networks, Adv. Mater., 32, 10.1002/adma.201905719 · DOI · Paper page
- Dewle, 2020, Multifarious fabrication approaches of producing aligned collagen scaffolds for tissue engineering applications, ACS Biomater. Sci. Eng., 6, 779, 10.1021/acsbiomaterials.9b01225 · DOI
- de Mori, 2018, 3D printing and electrospinning of composite hydrogels for cartilage and bone tissue engineering, Polymers, 10, 285, 10.3390/polym10030285 · DOI · Paper page
- Kim, 2019, Shear-induced alignment of collagen fibrils using 3D cell printing for corneal stroma tissue engineering, Biofabrication, 11, 035017, 10.1088/1758-5090/ab1a8b · DOI · Paper page
- Köpf, 2016, A tailored three-dimensionally printable agarose–collagen blend allows encapsulation, spreading, and attachment of human umbilical artery smooth muscle cells, Biofabrication, 8, 10.1088/1758-5090/8/2/025011 · DOI
- Moncal, 2019, Thermally-controlled extrusion-based bioprinting of collagen, J. Mater. Sci. Mater. Med., 30, 1, 10.1007/s10856-019-6258-2 · DOI
- Ouyang, 2017, A generalizable strategy for the 3D bioprinting of hydrogels from nonviscous photo-crosslinkable inks, Adv. Mater., 29, 10.1002/adma.201604983 · DOI · Paper page
- Guo, 2018, Three dimensional extrusion printing induces polymer molecule alignment and cell organization within engineered cartilage, J. Biomed. Mater. Res. A, 106, 2190, 10.1002/jbm.a.36426 · DOI
- Compton, 2014, 3D-printing of lightweight cellular composites, Adv. Mater., 26, 5930, 10.1002/adma.201401804 · DOI · Paper page
- Mozetic, 2017, Engineering muscle cell alignment through 3D bioprinting, J. Biomed. Mater. Res. A, 105, 2582, 10.1002/jbm.a.36117 · DOI
- Kim, 2020, 3D bioprinting of functional cell-laden bioinks and its application for cell-alignment and maturation, Appl. Mater. Today, 19, 10.1016/j.apmt.2020.100588 · DOI
- García-Lizarribar, 2018, Composite biomaterials as long-lasting scaffolds for 3D bioprinting of highly aligned muscle tissue, Macromol. Biosci., 18, 10.1002/mabi.201800167 · DOI
- Muir, 2020, Chemically modified biopolymers for the formation of biomedical hydrogels, Chem. Rev., 10.1021/acs.chemrev.0c00923 · DOI · Paper page
- Highley, 2016, Recent advances in hyaluronic acid hydrogels for biomedical applications, Curr. Opin. Biotechnol., 40, 35, 10.1016/j.copbio.2016.02.008 · DOI · Paper page
- Ouyang, 2020, Void‐free 3D bioprinting for in situ endothelialization and microfluidic perfusion, Adv. Funct. Mater., 30, 10.1002/adfm.201908349 · DOI · Paper page
- Ying, 2018, Three-dimensional bioprinting of gelatin methacryloyl (GelMA), Bio-Des. Manuf., 1, 215, 10.1007/s42242-018-0028-8 · DOI · Paper page
- Gramlich, 2013, Synthesis and orthogonal photopatterning of hyaluronic acid hydrogels with thiol-norbornene chemistry, Biomaterials, 34, 9803, 10.1016/j.biomaterials.2013.08.089 · DOI · Paper page
- Mauck, 2007, Regional multilineage differentiation potential of meniscal fibrochondrocytes: implications for meniscus repair, Anat. Rec., 290, 48, 10.1002/ar.20419 · DOI
- Erickson, 2009, Macromer density influences mesenchymal stem cell chondrogenesis and maturation in photocrosslinked hyaluronic acid hydrogels, Osteoarthr. Cartil., 17, 1639, 10.1016/j.joca.2009.07.003 · DOI · Paper page
- Galarraga, 2019, 3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue, Sci. Rep., 9, 1, 10.1038/s41598-019-56117-3 · DOI
- Morrill, 2016, A validated software application to measure fiber organization in soft tissue, Biomech. Model. Mechanobiol., 15, 1467, 10.1007/s10237-016-0776-3 · DOI
- Shkarin, 2019, Quanfima: an open source python package for automated fiber analysis of biomaterials, PLoS One, 14, 10.1371/journal.pone.0215137 · DOI
- Mendes, 2019, Human platelet lysate-based nanocomposite bioink for bioprinting hierarchical fibrillar structures, Biofabrication, 12, 10.1088/1758-5090/ab33e8 · DOI
- Blaeser, 2016, Controlling shear stress in 3D bioprinting is a key factor to balance printing resolution and stem cell integrity, Adv. Healthcare Mater., 5, 326, 10.1002/adhm.201500677 · DOI · Paper page
- Lund, 2017, Package ‘circular’, Rep. CRAN, 1, 1
- O’Bryan, 2017, Self-assembled micro-organogels for 3D printing silicone structures, Sci. Adv., 3, 10.1126/sciadv.1602800 · DOI · Paper page
- Sarker, 2017, Modeling the flow behavior and flow rate of medium viscosity alginate for scaffold fabrication with a three-dimensional bioplotter, J. Manuf. Sci. Eng., 139, 10.1115/1.4036226 · DOI · Paper page
- Melchels, 2016, Hydrogel-based reinforcement of 3D bioprinted constructs, Biofabrication, 8, 10.1088/1758-5090/8/3/035004 · DOI · Paper page
- Chimene, 2018, Nanoengineered ionic–covalent entanglement (NICE) bioinks for 3D bioprinting, ACS Appl. Mater. Interfaces, 10, 9957, 10.1021/acsami.7b19808 · DOI · Paper page
- Mouser, 2016, Yield stress determines bioprintability of hydrogels based on gelatin-methacryloyl and gellan gum for cartilage bioprinting, Biofabrication, 8, 10.1088/1758-5090/8/3/035003 · DOI · Paper page
- Moxon, 2017, Suspended manufacture of biological structures, Adv. Mater., 29, 10.1002/adma.201605594 · DOI · Paper page
- Ghaderinejad, 2021, An injectable anisotropic alginate hydrogel containing oriented fibers for nerve tissue engineering, Chem. Eng. J., 420, 130465, 10.1016/j.cej.2021.130465 · DOI
- Kanarska, 2019, Fiber motion in highly confined flows of carbon fiber and non-Newtonian polymer, J. Non-Newton. Fluid Mech., 265, 41, 10.1016/j.jnnfm.2019.01.003 · DOI
- Aguado, 2012, Improving viability of stem cells during syringe needle flow through the design of hydrogel cell carriers, Tissue Eng. A, 18, 806, 10.1089/ten.tea.2011.0391 · DOI · Paper page
- Gong, 2020, Complexation-induced resolution enhancement of 3D-printed hydrogel constructs, Nat. Commun., 11, 1, 10.1038/s41467-020-14997-4 · DOI · Paper page
- Wang, 2018, Development of a photo-crosslinking, biodegradable GelMA/PEGDA hydrogel for guided bone regeneration materials, Materials, 11, 1345, 10.3390/ma11081345 · DOI · Paper page
- Yin, 2019, Manufacturing of primed mesenchymal stromal cells for therapy, Nat. Biomed. Eng., 3, 90, 10.1038/s41551-018-0325-8 · DOI · Paper page
- Yao, 2020, Mesenchymal stem cell-laden hydrogel microfibers for promoting nerve fiber regeneration in long-distance spinal cord transection injury, ACS Biomater. Sci. Eng., 6, 1165, 10.1021/acsbiomaterials.9b01557 · DOI
- Chen, 2018, Role of boundary conditions in determining cell alignment in response to stretch, Proc. Natl Acad. Sci., 115, 986, 10.1073/pnas.1715059115 · doi:10.1073/pnas.1715059115
- Mirani, 2020, Facile method for fabrication of meter-long multifunctional hydrogel fibers with controllable biophysical and biochemical features, ACS Appl. Mater. Interfaces, 12, 9080, 10.1021/acsami.9b23063 · DOI · Paper page
Cited by
Ahrens, J. H., Uzel, S. G. M., Skylar‐Scott, M., Mata, M. M., Lu, A., Kroll, K. T., & Lewis, J. A. (2022) · Advanced Materials · doi:10.1002/adma.202200217 · Cited by 143
New dimensions of electrospun nanofiber material designs for biotechnological uses
Kamaraj, M., Moghimi, N., Chen, J., Morales, R., Chen, S., Khademhosseini, A., & John, J. V. (2024) · Trends in Biotechnology · doi:10.1016/j.tibtech.2023.11.008 · Cited by 44
Kamaraj, M., Rezayof, O., Barer, A., Kim, H., Moghimi, N., Joshi, A., Dokmeci, M. R., Khademhosseini, A., Alambeigi, F., & John, J. V. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214057 · Cited by 17
Mazur, R. A., & Lampe, K. J. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01455 · Cited by 3
Metadata
- Authors
- Prendergast, M. E., Davidson, M. D., & Burdick, J. A.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2021-09-24
- Volume
- 13
- Issue
- 4
- Pages
- 044108
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W3197460233
- Cited by
- 90
- References
- 8
- FWCI
- 3.78
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- publishingsupport.iopscience.iop.org/iop-standard/v1 (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Funders
- National Science Foundation (CMMI: 15-48571)
- National Institutes of Health (F32 DK117568)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A biofabrication method to align cells within bioprinted photocrosslinkable and cell-degradable hydrogel constructs via embedded fibers. https://app.cochat.ai/papers/10.1088/1758-5090/ac25cc
- The paper
- Prendergast, M. E., Davidson, M. D., & Burdick, J. A. (2021). A biofabrication method to align cells within bioprinted photocrosslinkable and cell-degradable hydrogel constructs via embedded fibers. Biofabrication. https://doi.org/10.1088/1758-5090/ac25cc
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.