The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Cross-Linking Electrospun Type II Collagen Tissue Engineering Scaffolds with Carbodiimide in Ethanol
Abstract
In trying to assess the structural integrity of electrospun type II collagen scaffolds, a modified but new technique for cross-linking collagen has been developed. Carbodiimides have been previously used to cross-link collagen in gels and in lyophilized native tissue specimens but had not been used for electrospun mats until recently. This cross-linking agent, and in particular 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC), is of extreme interest, especially for tissue-engineered scaffolds composed specifically of native polymers (e.g., collagen), because it is a zero-length cross-linking agent that has not been shown to cause any cytotoxic reactions. The unique aspect of the cross-linking protocol in this study involves the use of ethanol as the solvent for the cross-linking agent, because the pure collagen electrospun mats immediately disintegrate when placed in an aqueous solution. This study examines 2 concentrations of EDC with and without the addition of N-hydroxysuccinimide to the reaction (which has been shown to result in higher cross-linking yields in aqueous solutions) to test the hypothesis that the use of EDC in a nonaqueous solution will cross-link electrospun type II collagen fibrous matrices in a comparable manner to typical glutaraldehyde fixation protocols. The use of EDC is compared with the cross-linking effects of glutaraldehyde via mechanical testing (uniaxial tensile testing) and biochemical testing (analysis of the percentage of free amino groups). The stress-strain curves of the cross-linked samples demonstrated uniaxial tensile behavior more characteristic of native tissue than do the dry, untreated samples. The heated, 50% glutaraldehyde cross-linking protocol resulted in a mean peak stress of 0.76 MPa, a mean strain at break of 127.30%, and a mean tangential modulus of 0.89 MPa; mean values for the samples treated with the EDC protocols ranged from 0.35 to 0.60 MPa for peak stress, from 111.83 to 159.23% for strain at break, and from 0.57 to 0.92 MPa for tangential modulus. Low and high concentrations (20 mM and 200 mM, respectively) of EDC alone were comparable in extent of cross-linking (29% and 29%, respectively) to the heated 50% glutaraldehyde cross-linking protocol (30% cross-linked).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
Self-citationHunziker, E. B. (2002) · Osteoarthritis and Cartilage · doi:10.1053/joca.2002.0801 · Cited by 1,975
Principles of Tissue Engineering
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07193-4 · Cited by 1,906
Strength of biological materials
Yamada, H., & Evans, F. G. (1970) · Cited by 1,136
Review: tissue engineering for regeneration of articular cartilage
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00213-6 · Cited by 1,052
Enhancement by N-hydroxysulfosuccinimide of water-soluble carbodiimide-mediated coupling reactions
Staros, J. V., Wright, R. W., & Swingle, D. M. (1986) · Analytical Biochemistry · doi:10.1016/0003-2697(86)90176-4 · Cited by 898
Rho, K. S., Jeong, L., Lee, G., Seo, B.-M., Park, Y. J., Hong, S.-D., Roh, S., Cho, J. J., Park, W. H., & Min, B.-M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.004 · Cited by 876
Zero-length crosslinking procedure with the use of active esters
Grabarek, Z., & Gergely, J. (1990) · Analytical Biochemistry · doi:10.1016/0003-2697(90)90267-d · Cited by 827
Cited by
Biopolymer-Based Hydrogels As Scaffolds for Tissue Engineering Applications: A Review
Van Vlierberghe, S., Dubruel, P., & Schacht, E. (2011) · Biomacromolecules · doi:10.1021/bm200083n · Cited by 1,716
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Advancing biomaterials of human origin for tissue engineering
Chen, F.-M., & Liu, X. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.02.004 · Cited by 1,158
The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development
Sorushanova, A., Delgado, L. M., Wu, Z., Shologu, N., Kshirsagar, A., Raghunath, R., Mullen, A. M., Bayon, Y., Pandit, A., Raghunath, M., et al. (2019) · Advanced Materials · doi:10.1002/adma.201801651 · Cited by 1,151
Nanofiber technology: Designing the next generation of tissue engineering scaffolds
Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., & Bowlin, G. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.022 · Cited by 1,141
Self-citationElectrospun nanofibers in energy and environmental applications
Thavasi, V., Singh, G., & Ramakrishna, S. (2008) · Energy & Environmental Science · doi:10.1039/b809074m · Cited by 934
Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives
Dong, C., & Lv, Y. (2016) · Polymers · doi:10.3390/polym8020042 · Cited by 851
A Review: Electrospinning of Biopolymer Nanofibers and their Applications
Schiffman, J. D., & Schauer, C. L. (2008) · Polymer Reviews · doi:10.1080/15583720802022182 · Cited by 820
Sell, S. A., Wolfe, P. S., Garg, K., McCool, J. M., Rodriguez, I. A., & Bowlin, G. L. (2010) · Polymers · doi:10.3390/polym2040522 · Cited by 578
Self-citationElectrospun Nanofibers for Regenerative Medicine
Liu, W., Thomopoulos, S., & Xia, Y. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201100021 · Cited by 550
Atala, A., Kasper, F. K., & Mikos, A. G. (2012) · Science Translational Medicine · doi:10.1126/scitranslmed.3004890 · Cited by 544
Sell, S. A., McClure, M. J., Garg, K., Wolfe, P. S., & Bowlin, G. L. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.012 · Cited by 491
Self-citationElectrospinning jets and nanofibrous structures
Garg, K., & Bowlin, G. L. (2011) · Biomicrofluidics · doi:10.1063/1.3567097 · Cited by 474
Self-citationBioactive polymeric scaffolds for tissue engineering
Stratton, S., Shelke, N. B., Hoshino, K., Rudraiah, S., & Kumbar, S. G. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.11.001 · Cited by 469
A review on fabrication of nanofibers via electrospinning and their applications
Islam, M. S., Ang, B. C., Andriyana, A., & Afifi, A. M. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1288-4 · Cited by 386
McCall, A. S., Kraft, S., Edelhauser, H. F., Kidder, G. W., Lundquist, R. R., Bradshaw, H. E., Dedeic, Z., Dionne, M. J. C., Clement, E. M., & Conrad, G. W. (2010) · Investigative Opthalmology & Visual Science · doi:10.1167/iovs.09-3738 · Cited by 306
Wise, S. G., Byrom, M. J., Waterhouse, A., Bannon, P. G., Ng, M. K. C., & Weiss, A. S. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.022 · Cited by 299
Electrospun scaffolds for stem cell engineering
Lim, S. H., & Mao, H.-Q. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.011 · Cited by 297
Cross-Linking Strategies for Electrospun Gelatin Scaffolds
Campiglio, C. E., Contessi Negrini, N., Farè, S., & Draghi, L. (2019) · Materials · doi:10.3390/ma12152476 · Cited by 277
Ayres, C. E., Jha, B. S., Meredith, H., Bowman, J. R., Bowlin, G. L., Henderson, S. C., & Simpson, D. G. (2008) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856208784089643 · Cited by 275
Self-citationHierarchical micro/nanofibrous membranes of sustained releasing VEGF for periosteal regeneration
Wu, L., Gu, Y., Liu, L., Tang, J., Mao, J., Xi, K., Jiang, Z., Zhou, Y., Xu, Y., Deng, L., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119555 · Cited by 275
Delgado, L. M., Bayon, Y., Pandit, A., & Zeugolis, D. I. (2015) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2014.0290 · Cited by 272
McClure, M. J., Sell, S. A., Simpson, D. G., Walpoth, B. H., & Bowlin, G. L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.029 · Cited by 267
Self-citationRecent advancements in electrospinning design for tissue engineering applications: A review
Kishan, A. P., & Cosgriff‐Hernandez, E. M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36124 · Cited by 261
Mauck, R. L., Baker, B. M., Nerurkar, N. L., Burdick, J. A., Li, W.-J., Tuan, R. S., & Elliott, D. M. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0652 · Cited by 213
Collagen and its modifications—crucial aspects with concern to its processing and analysis
Rýglová, Š., Braun, M., & Suchý, T. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600460 · Cited by 106
Angiogenic potential of human macrophages on electrospun bioresorbable vascular grafts
Garg, K., Sell, S. A., Madurantakam, P., & Bowlin, G. L. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/3/031001 · Cited by 48
Self-citationEDC Cross-linking of Decellularized Tissue: A Promising Approach?
Lehmann, N., Christ, T., Daugs, A., Bloch, O., & Holinski, S. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0416 · Cited by 30
Advances in guided bone regeneration membranes: a comprehensive review of materials and techniques
Ali, M., Mohd Noor, S. N. F., Mohamad, H., Ullah, F., Javed, F., & Abdul Hamid, Z. A. (2024) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/ad1e75 · Cited by 19
Electro-spinning of pure collagen nano-fibres–just an expensive way to make gelatin?
Zeugolis, D. I., Khew, S. T., Yew, E. S. Y., Ekaputra, A. K., Tong, Y. W., Yung, L.-Y. L., Hutmacher, D. W., Sheppard, C., & Raghunath, M. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.009 · Cited by 1
Metadata
- Authors
- Barnes, C. P., Pemble, C. W., Brand, D. D., Simpson, D. G., & Bowlin, G. L.
- Venue
- Tissue Engineering
- Publisher
- SAGE Publications
- Published
- 2007-07
- Volume
- 13
- Issue
- 7
- Pages
- 1593-1605
- ISSN
- 1076-3279 (ISSN-L)
- 1557-8690
- OpenAlex
- W2013035214
- Cited by
- 253
- References
- 44
- FWCI
- 7.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.