Drivers and barriers to circular economy implementation: An explorative study in Pakistan’s automobile industry
The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Abstract
Purpose: Circular economy (CE) has gained considerable attention from researchers and practitioners over the past few years because of its potential social and environmental benefits. However, limited attention has been given in the literature to explore the drivers and barriers in CE implementation in emerging and developing countries besides China. Therefore, the purpose of this paper is to identify the drivers and barriers to implementing a CE in Pakistan’s automobile manufacturing industry. Design/methodology/approach: This study adopts an explorative approach to understand the drivers and barriers at the micro-level CE implementation in Pakistan’s automobile industry. The research design includes both qualitative and quantitative methods using a survey instrument and interviews to gather data. The use of the two main sources of data provides the opportunity for triangulation of the data to improve the validity of the findings, and enables greater inferences from the results. Findings: This study shows that “profitability/market share/benefit” (30 percent), “cost reduction” (22 percent) and “business principle/concern for environment/appreciation” (19 percent) are the top three drivers. Similarly, “unawareness” (22 percent), “cost and financial constraint” (20 percent) and “lack of expertise” (17 percent) are the top three barriers in implementing CE principles in Pakistan automobiles industry. Research limitations/implications: This study considers only Pakistan automobiles industry, and the practical implications potentially limit to emerging Asian economies. Originality/value: This study is the first of its kind that has investigated the drivers and barriers of CE at the organizational level in the automobile industry of Pakistan. Thus, it helps to advance the understanding of the subject matter and enables the formulation of effective policies and business strategies by practitioners for upscaling CE and sustainability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Qualitative Data Analysis: An Expanded Sourcebook
(1994) · Journal of Environmental Psychology · doi:10.1016/s0272-4944(05)80231-2 · Cited by 48,420
(2014) · Climate Change 2013 – The Physical Science Basis · doi:10.1017/cbo9781107415324.004 · Cited by 23,880
Hartley, J. (2004) · Essential Guide to Qualitative Methods in Organizational Research · doi:10.4135/9781446280119.n26 · Cited by 15,461
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
Business models for sustainable innovation: state-of-the-art and steps towards a research agenda
Boons, F., & Lüdeke-Freund, F. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.07.007 · Cited by 2,469
Product services for a resource-efficient and circular economy – a review
Tukker, A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.049 · Cited by 1,961
Barriers to the Circular Economy: Evidence From the European Union (EU)
Kirchherr, J., Piscicelli, L., Bour, R., Kostense-Smit, E., Muller, J., Huibrechtse-Truijens, A., & Hekkert, M. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2018.04.028 · Cited by 1,903
Survey research in operations management: a process‐based perspective
Forza, C. (2002) · International Journal of Operations & Production Management · doi:10.1108/01443570210414310 · Cited by 1,610
Govindan, K., & Hasanagic, M. (2018) · International Journal of Production Research · doi:10.1080/00207543.2017.1402141 · Cited by 1,522
A review of the circular economy in China: moving from rhetoric to implementation
Su, B., Heshmati, A., Geng, Y., & Yu, X. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.11.020 · Cited by 1,429
The emergence of circular economy: a new framing around prolonging resource productivity
Blomsma, F., & Brennan, G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12603 · Cited by 1,383
Towards a consensus on the circular economy
Prieto-Sandoval, V., Jaca, C., & Ormazabal, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.224 · Cited by 1,282
The Circular Economy: A New Development Strategy in China
Yuan, Z., Bi, J., & Moriguichi, Y. (2006) · Journal of Industrial Ecology · doi:10.1162/108819806775545321 · Cited by 1,175
Lost in transition? Drivers and Barriers in the Eco-innovation Road to the Circular Economy
de Jesus, A., & Mendonça, S. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2017.08.001 · Cited by 1,167
Lopes de Sousa Jabbour, A. B., Jabbour, C. J. C., Godinho Filho, M., & Roubaud, D. (2018) · Annals of Operations Research · doi:10.1007/s10479-018-2772-8 · Cited by 1,116
de Sousa Jabbour, A. B. L., Jabbour, C. J. C., Foropon, C., & Godinho Filho, M. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2018.01.017 · Cited by 1,043
Circular Business Model Innovation: Inherent Uncertainties
Linder, M., & Williander, M. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1906 · Cited by 1,039
The history and current applications of the circular economy concept
Winans, K., Kendall, A., & Deng, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.123 · Cited by 1,024
Geng, Y., & Doberstein, B. (2008) · International Journal of Sustainable Development & World Ecology · doi:10.3843/susdev.15.3:6 · Cited by 855
Ranta, V., Aarikka-Stenroos, L., Ritala, P., & Mäkinen, S. J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.017 · Cited by 674
Barriers to effective circular supply chain management in a developing country context
Mangla, S. K., Luthra, S., Mishra, N., Singh, A., Rana, N. P., Dora, M., & Dwivedi, Y. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449265 · Cited by 610
Jabbour, C. J. C., Jabbour, A. B. L. D. S., Sarkis, J., & Filho, M. G. (2019) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.09.010 · Cited by 576
Jawahir, I. S., & Bradley, R. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.067 · Cited by 575
Zhu, Q., Geng, Y., & Lai, K.-H. (2010) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.02.013 · Cited by 569
Circular Economy in Spanish SMEs: Challenges and opportunities
Ormazabal, M., Prieto-Sandoval, V., Puga-Leal, R., & Jaca, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.031 · Cited by 565
LEAN, GREEN, AND THE QUEST FOR SUPERIOR ENVIRONMENTAL PERFORMANCE
ROTHENBERG, S., PIL, F. K., & MAXWELL, J. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00372.x · Cited by 548
Assessing the social sustainability of supply chains using Best Worst Method
Badri Ahmadi, H., Kusi-Sarpong, S., & Rezaei, J. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.020 · Cited by 548
Self-citationMoktadir, M. A., Rahman, T., Rahman, M. H., Ali, S. M., & Paul, S. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.063 · Cited by 512
Comparing linear and circular supply chains: A case study from the construction industry
Nasir, M. H. A., Genovese, A., Acquaye, A. A., Koh, S. C. L., & Yamoah, F. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.06.008 · Cited by 503
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Development drivers for waste management
Wilson, D. C. (2007) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x07079149 · Cited by 474
Measuring China's Circular Economy
Geng, Y., Sarkis, J., Ulgiati, S., & Zhang, P. (2013) · Science · doi:10.1126/science.1227059 · Cited by 472
Zhu, Q., & Geng, Y. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.09.017 · Cited by 463
Remanufacturing for the Circular Economy: An Examination of Consumer Switching Behavior
Hazen, B. T., Mollenkopf, D. A., & Wang, Y. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1929 · Cited by 429
Moktadir, M. A., Ali, S. M., Kusi-Sarpong, S., & Shaikh, M. A. A. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.04.020 · Cited by 422
Self-citationMasi, D., Kumar, V., Garza-Reyes, J. A., & Godsell, J. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449246 · Cited by 409
A supply chain sustainability innovation framework and evaluation methodology
Kusi-Sarpong, S., Gupta, H., & Sarkis, J. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1518607 · Cited by 406
Self-citationResource duration as a managerial indicator for Circular Economy performance
Franklin-Johnson, E., Figge, F., & Canning, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.023 · Cited by 377
Park, J., Sarkis, J., & Wu, Z. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.06.001 · Cited by 375
Ferronato, N., Rada, E. C., Gorritty Portillo, M. A., Cioca, L. I., Ragazzi, M., & Torretta, V. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.09.095 · Cited by 375
Circular economy design considerations for research and process development in the chemical sciences
Clark, J. H., Farmer, T. J., Herrero-Davila, L., & Sherwood, J. (2016) · Green Chemistry · doi:10.1039/c6gc00501b · Cited by 344
Electronic waste as a secondary source of critical metals: Management and recovery technologies
Işıldar, A., Rene, E. R., van Hullebusch, E. D., & Lens, P. N. L. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.031 · Cited by 310
Analyzing the drivers of green manufacturing with fuzzy approach
Govindan, K., Diabat, A., & Madan Shankar, K. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.054 · Cited by 308
Smart industry and the pathways to HRM 4.0: implications for SCM
Liboni, L. B., Cezarino, L. O., Jabbour, C. J. C., Oliveira, B. G., & Stefanelli, N. O. (2019) · Supply Chain Management: An International Journal · doi:10.1108/scm-03-2018-0150 · Cited by 278
A new business model for baby prams based on leasing and product remanufacturing
Mont, O., Dalhammar, C., & Jacobsson, N. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.01.024 · Cited by 276
Circular Economy: Overview of Barriers
Araujo Galvão, G. D., de Nadae, J., Clemente, D. H., Chinen, G., & de Carvalho, M. M. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.04.011 · Cited by 251
Ghisellini, P., Ji, X., Liu, G., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.084 · Cited by 244
Jakhar, S. K., Mangla, S. K., Luthra, S., & Kusi-Sarpong, S. (2019) · Management Decision · doi:10.1108/md-09-2018-0990 · Cited by 230
Self-citationProduct-service systems business models for circular supply chains
Yang, M., Smart, P., Kumar, M., Jolly, M., & Evans, S. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449247 · Cited by 228
Stahel, W. R. (2010) · doi:10.1057/9780230274907 · Cited by 220
Xue, B., Chen, X.-P., Geng, Y., Guo, X.-J., Lu, C.-P., Zhang, Z.-L., & Lu, C.-Y. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.05.010 · Cited by 214
Kushwaha, G. S., & Sharma, N. K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.072 · Cited by 210
Zhu, Q., Geng, Y., & Lai, K.-H. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2011.00329.x · Cited by 205
Supplier sustainability performance evaluation and selection: A framework and methodology
Khan, S. A., Kusi-Sarpong, S., Arhin, F. K., & Kusi-Sarpong, H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.144 · Cited by 204
Self-citationAligning retail reverse logistics practice with circular economy values: an exploratory framework
Bernon, M., Tjahjono, B., & Ripanti, E. F. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449266 · Cited by 202
Material efficiency in manufacturing: swedish evidence on potential, barriers and strategies
Shahbazi, S., Wiktorsson, M., Kurdve, M., Jönsson, C., & Bjelkemyr, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.143 · Cited by 195
Assessing green supply chain practices in the Ghanaian mining industry: A framework and evaluation
Kusi-Sarpong, S., Sarkis, J., & Wang, X. (2016) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.04.002 · Cited by 192
Self-citationOpportunities for Industry 4.0 to Support Remanufacturing
Yang, S., M. R., A. R., Kaminski, J., & Pepin, H. (2018) · Applied Sciences · doi:10.3390/app8071177 · Cited by 190
Drivers for development of circular economy – A case study of Serbia
Ilic, M. R., & Nikolić, M. (2016) · Habitat International · doi:10.1016/j.habitatint.2016.06.003 · Cited by 188
Current status of CSR in the realm of supply management: the case of the Korean electronics industry
Lee, K., & Kim, J. (2009) · Supply Chain Management: An International Journal · doi:10.1108/13598540910942000 · Cited by 180
Luthra, S., & Mangla, S. K. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.07.005 · Cited by 172
Kusi‐Sarpong, S., Bai, C. A., Sarkis, J., & Wang, X. (2014) · Resources Policy · doi:10.1016/j.resourpol.2014.10.011 · Cited by 167
Self-citationApplications of industrial eggshell as a valuable anthropogenic resource
Quina, M. J., Soares, M. A. R., & Quinta-Ferreira, R. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.09.027 · Cited by 160
An implementation path for green information technology systems in the Ghanaian mining industry
Bai, C. A., Kusi‐Sarpong, S., & Sarkis, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.151 · Cited by 157
Self-citationAgyemang, M., Zhu, Q., Adzanyo, M., Antarciuc, E., & Zhao, S. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.011 · Cited by 123
Self-citationHow green is green? Ecopreneurs balancing environmental concerns and business goals
Kirkwood, J., & Walton, S. C. (2014) · Australasian Journal of Environmental Management · doi:10.1080/14486563.2014.880384 · Cited by 119
Success factors and barriers in re-use of electrical and electronic equipment
Kissling, R., Coughlan, D., Fitzpatrick, C., Boeni, H., Luepschen, C., Andrew, S., & Dickenson, J. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.07.009 · Cited by 106
Bicket, M., Guilcher, S. J. T., Hestin, M., Hudson, C. G., Razzini, P., Tan, A., ten Brink, P., van Dijl, E., Vanner, R., & Watkins, E. D. (2014) · WestminsterResearch (University of Westminster) · doi:10.2779/29525 · Cited by 105
Bekchanov, M., & Mirzabaev, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.186 · Cited by 104
Schroeder, P., Dewick, P. M., Kusi‐Sarpong, S., & Hofstetter, J. S. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.003 · Cited by 99
Self-citationCooperative strategies for sustainability in a decentralized supply chain with competing suppliers
Xie, G. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.013 · Cited by 97
Coenen, J., van der Heijden, R. E. C. M., & van Riel, A. C. R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.216 · Cited by 94
Selecting a remanufacturing quality strategy based on consumer preferences
Cui, L., Wu, K., & Tseng, M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.056 · Cited by 84
Experience of producing natural gas from corn straw in China
Liu, H., Ou, X., Yuan, J., & Yan, X. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.005 · Cited by 77
Mont, O., Plepys, A., Whalen, K. A., & Nußholz, J. L. K. (2017) · Lund University Publications (Lund University) · Cited by 72
Design for Remanufacturing and Circular Business Models
Prendeville, S. M., & Bocken, N. M. P. (2016) · Ecoproduction · doi:10.1007/978-981-10-0471-1_18 · Cited by 69
CSR perception as a signpost for circular economy
Esken, B., Franco-García, M.-L., & Fisscher, O. A. M. (2018) · Management Research Review · doi:10.1108/mrr-02-2018-0054 · Cited by 66
Gurtoo, A., & Antony, S. J. (2007) · Management of Environmental Quality An International Journal · doi:10.1108/14777830710826676 · Cited by 56
Gaur, J., & Mani, V. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.08.023 · Cited by 50
Self-citationAgyemang, M., Zhu, Q., & Tian, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.059 · Cited by 40
Self-citationAbubakar, F. (2018) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 24
Rizos, V., Behrens, A., Drabik, E., Rinaldi, D., & Tuokko, K. (2018) · Archive of European Integration (AEI) (University of Pittsburgh) · Cited by 22
PSS for Product Life Extension through Remanufacturing
Walsh, B. (2012) · Cited by 21
Cited by
Breaking circular economy barriers
Grafström, J., & Aasma, S. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126002 · Cited by 450
Kumar, P., Singh, R. K., & Kumar, V. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105215 · Cited by 422
Circular supply chain management: A state-of-art review and future opportunities
Lahane, S., Kant, R., & Shankar, R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120859 · Cited by 416
Kazancoglu, I., Sagnak, M., Kumar Mangla, S., & Kazancoglu, Y. (2021) · Business Strategy and the Environment · doi:10.1002/bse.2641 · Cited by 392
Gupta, H., Kumar, A., & Wasan, P. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126253 · Cited by 376
Metadata
- Authors
- Agyemang, M., Kusi-Sarpong, S., Khan, S. A., Mani, V., Rehman, S. T., & Kusi-Sarpong, H.
- Venue
- Management Decision
- Publisher
- Emerald
- Published
- 2019-04-18
- Volume
- 57
- Issue
- 4
- Pages
- 971-994
- ISSN
- 0025-1747 (ISSN-L)
- OpenAlex
- W2908134449
- Cited by
- 394
- References
- 85
- FWCI
- 66.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.