Novel large area joining technique for improved power device performance
The DOI matches its Crossref record.
Abstract
Conventional techniques of joining silicon wafers to suitable substrates do not satisfy the demands of future power devices. Therefore, a low-temperature joining technique based on the principle of diffusion welding has been developed. The surfaces to be joined have to be metalized with Ag or Au. The molybdenum substrate is coated with a thin layer of silver flakes. Thereafter, the parts to be joined are sintered together at about 240 degrees C and a pressure of approximately 40 N/mm/sup 2/ for a few minutes. The joining technique does not affect the silicon wafer, and accordingly, is compatible with conventional power device and IC fabrication techniques. Both sides of the wafer can be joined with substrates even if IC structures are present. This possibility allows an increased surge current. Numerical calculations for different wafer thicknesses have been performed and compared with test devices. The technical usefulness has been proved by additional tests such as thermal cycling.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
GaN based nanorods for solid state lighting
Li, S., & Waag, A. (2012) · Journal of Applied Physics · doi:10.1063/1.3694674 · Cited by 513
State of the art of high temperature power electronics
Buttay, C., Planson, D., Allard, B., Bergogne, D., Bevilacqua, P., Joubert, C., Lazar, M., Martin, C., Morel, H., Tournier, D., et al. (2011) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2010.10.003 · Cited by 432
Mechanical properties of nano-silver joints as die attach materials
Siow, K. S. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.092 · Cited by 390
Joining of Silver Nanomaterials at Low Temperatures: Processes, Properties, and Applications
Peng, P., Hu, A., Gerlich, A. P., Zou, G., Liu, L., & Zhou, Y. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02134 · Cited by 364
Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection
Wang, T., Chen, X., Lu, G.-Q., & Lei, G.-Y. (2007) · Journal of Electronic Materials · doi:10.1007/s11664-007-0230-5 · Cited by 345
A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices
Chin, H. S., Cheong, K. Y., & Ismail, A. B. (2010) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-010-9365-5 · Cited by 337
Are Sintered Silver Joints Ready for Use as Interconnect Material in Microelectronic Packaging?
Siow, K. S. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-013-2967-3 · Cited by 317
Low-temperature low-pressure die attach with hybrid silver particle paste
Suganuma, K., Sakamoto, S., Kagami, N., Wakuda, D., Kim, K.-S., & Nogi, M. (2012) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.07.088 · Cited by 287
Reliability assessment of sintered nano-silver die attachment for power semiconductors
Knoerr, M., Kraft, S., & Schletz, A. (2010) · 2010 12th Electronics Packaging Technology Conference · doi:10.1109/eptc.2010.5702605 · Cited by 184
High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment
Bai, J. G., Yin, J., Zhang, Z., Lu, G.-Q., & van Wyk, J. D. (2007) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2007.898628 · Cited by 177
Metadata
- Authors
- Schwarzbauer, H., & Kuhnert, R.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1991
- Volume
- 27
- Issue
- 1
- Pages
- 93-95
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2134357750
- Cited by
- 197
- References
- 0
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.