The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Time-domain passivity control of haptic interfaces
Abstract
A patent-pending, energy-based method is presented for controlling a haptic interface system to ensure stable contact under a wide variety of operating conditions. System stability is analyzed in terms of the time-domain definition of passivity. We define a "passivity observer" (PO) which measures energy flow in and out of one or more subsystems in real-time software. Active behavior is indicated by a negative value of the PO at any time. We also define the "passivity controller" (PC), an adaptive dissipative element which, at each time sample, absorbs exactly the net energy output (if any) measured by the PO. The method is tested with simulation and implementation in the Excalibur haptic interface system. Totally stable operation was achieved under conditions such as stiffness >100 N/mm or time delays of 15 ms. The PO/PC method requires very little additional computation and does not require a dynamical model to be identified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dissipative dynamical systems part I: General theory
Willems, J. C. (1972) · Archive for Rational Mechanics and Analysis · doi:10.1007/bf00276493 · Cited by 3,250
Feedback Systems: Input-Output Properties
Desoer, C. A., Vidyasagar, M., & Willson, A. N. (1975) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3426967 · Cited by 3,225
L2-Gain and Passivity Techniques in Nonlinear Control
van der Schaft, A. J. (2016) · Communications and control engineering/Communications and control engineering series · doi:10.1007/978-3-319-49992-5 · Cited by 2,039
Niemeyer, G., & Slotine, J.-J. E. (1991) · IEEE Journal of Oceanic Engineering · doi:10.1109/48.64895 · Cited by 1,407
Chua, L. O. (1987) · Cited by 1,245
A design framework for teleoperators with kinesthetic feedback
Hannaford, B. (1989) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.88057 · Cited by 926
Self-citationA constraint-based god-object method for haptic display
Zilles, C. B., & Salisbury, J. K. (2002) · Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots · doi:10.1109/iros.1995.525876 · Cited by 819
Stable haptic interaction with virtual environments
Adams, R. J., & Hannaford, B. (1999) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.768179 · Cited by 646
Self-citationPassivity of a class of sampled-data systems: Application to haptic interfaces
Colgate, J. E., & Schenkel, G. G. (1997) · Journal of Robotic Systems · doi:10.1002/(sici)1097-4563(199701)14:1<37::aid-rob4>3.0.co;2-v · Cited by 490
Issues in the haptic display of tool use
Colgate, J. E., Stanley, M. C., & Brown, J. M. (2002) · Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots · doi:10.1109/iros.1995.525875 · Cited by 404
Cited by
Hayward, V., Astley, O. R., Cruz‐Hernandez, M., Grant, D., & Robles‐De‐La‐Torre, G. (2004) · Sensor Review · doi:10.1108/02602280410515770 · Cited by 600
Haptic rendering: introductory concepts
Salisbury, K., Conti, F., & Barbagli, F. (2004) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.2004.1274058 · Cited by 463
Stable Teleoperation With Time-Domain Passivity Control
Ryu, J.-H., Kwon, D.-S., & Hannaford, B. (2004) · IEEE Transactions on Robotics and Automation · doi:10.1109/tra.2004.824689 · Cited by 393
Self-citationStability of Haptic Rendering: Discretization, Quantization, Time Delay, and Coulomb Effects
Diolaiti, N., Niemeyer, G., Barbagli, F., & Salisbury, J. K. (2006) · IEEE Transactions on Robotics · doi:10.1109/tro.2005.862487 · Cited by 302
Toward Haptic Communications Over the 5G Tactile Internet
Antonakoglou, K., Xu, X., Steinbach, E., Mahmoodi, T., & Dohler, M. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2851452 · Cited by 250
Haptic Codecs for the Tactile Internet
Steinbach, E., Strese, M., Eid, M., Liu, X., Bhardwaj, A., Liu, Q., Al-Ja'Afreh, M., Mahmoodi, T., Hassen, R., El Saddik, A., et al. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2018.2867835 · Cited by 166
Atashzar, S. F., Shahbazi, M., Tavakoli, M., & Patel, R. V. (2017) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2016.2594584 · Cited by 78
Atashzar, S. F., Polushin, I. G., & Patel, R. V. (2017) · IEEE Transactions on Robotics · doi:10.1109/tro.2016.2623336 · Cited by 57
Atashzar, S. F., Shahbazi, M., Samotus, O., Tavakoli, M., Jog, M. S., & Patel, R. V. (2016) · IEEE Journal of Selected Topics in Signal Processing · doi:10.1109/jstsp.2016.2530632 · Cited by 45
NETWORK TRAFFIC REDUCTION IN HAPTIC TELEPRESENCE SYSTEMS BY DEADBAND CONTROL
Hirche, S., Hinterseer, P., Steinbach, E., & Buss, M. (2005) · IFAC Proceedings Volumes · doi:10.3182/20050703-6-cz-1902.01168 · Cited by 42
Atashzar, S. F., Shahbazi, M., Tavakoli, M., & Patel, R. V. (2017) · The International Journal of Robotics Research · doi:10.1177/0278364916689139 · Cited by 41
Metadata
- Authors
- Hannaford, B., & Ryu, J.-H.
- Venue
- IEEE Transactions on Robotics and Automation
- Published
- 2002
- Volume
- 18
- Issue
- 1
- Pages
- 1-10
- ISSN
- 1042-296X (ISSN-L)
- OpenAlex
- W2153631465
- Cited by
- 767
- References
- 15
- FWCI
- 90.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.