Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
With the developments and applications of the new information technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, a smart manufacturing era is coming. At the same time, various national manufacturing development strategies have been put forward, such as Industry 4.0, Industrial Internet, manufacturing based on Cyber-Physical System, and Made in China 2025. However, one of specific challenges to achieve smart manufacturing with these strategies is how to converge the manufacturing physical world and the virtual world, so as to realize a series of smart operations in the manufacturing process, including smart interconnection, smart interaction, smart control and management, etc. In this context, as a basic unit of manufacturing, shop-floor is required to reach the interaction and convergence between physical and virtual spaces, which is not only the imperative demand of smart manufacturing, but also the evolving trend of itself. Accordingly, a novel concept of digital twin shopfloor (DTS) based on digital twin is explored and its four key components are discussed, including physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor digital twin data. What is more, the operation mechanisms and implementing methods for DTS are studied and key technologies as well as challenges ahead are investigated, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“tracking a product throughout its life cycle [76]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [76]
In the citing paper
“Research indicates that integrating Digital Twins into building management can result in energy savings of up to 30% [10,24,25].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“A Digital Twin is a virtual replica of a physical system, designed to simulate its behavior and performance under varying conditions [9,10].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“The accuracy and effectiveness of DTs heavily depend on the quality of collected data, and inconsistent or incomplete data can lead to inaccurate predictions and inefficient decision-making.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“As a result, maintenance costs in energy-intensive industries have been reduced by 20 to 30 percent.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 1×
“[37], [38].”
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Cyber-physical Production Systems: Roots, Expectations and R&D Challenges
Monostori, L. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.115 · Cited by 1,215
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“[37], [38].”
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480 · cited 1×
“3) Construction and management of SDTD Technologies involve data cleaning, data integration, data fusion, two-way mirrors between physical and virtual data, shop-floor big data [40], etc.”
BackgroundSelf-citationRFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462 · cited 1×
“build an RFID-enabled real-time manufacturing execution system, which provides more practical planning and scheduling decisions for shop-floor [25].”
BackgroundTao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2232936 · Cited by 362 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationSyberfeldt, A., Danielsson, O., & Gustavsson, P. (2017) · IEEE Access · doi:10.1109/access.2017.2703952 · Cited by 221 · cited 1×
“After that, layout optimization [28], production planning [29], [30] and fault diagnosis [31], etc.”
Method
Research works printed but not linked: 1
- tao, 2017, Digital twin workshop: A new paradigm for future workshop, Comput Integr Manuf Syst, 23, 1
Cited by
Items 1,001–1,100 of 1,426
Akyüz, G. A., & Balkan, D. (2023) · Smart Science · doi:10.1080/23080477.2023.2263239 · Cited by 4
“These capabilities start with the shop floor, extending to enterprise and network levels, leading to the competitiveness of not only the enterprise but also the entire supply network [20–22].”
BackgroundDesign and Implementation of a Digital Twin System for Log Rotary Cutting Optimization
Zhao, Y., Yan, L., Wu, J., & Song, X. (2023) · Future Internet · doi:10.3390/fi16010007 · Cited by 3
Application of Big Data Processing Method in intelligent Manufacturing
Xiao, Y., & Liu, Q. (2019) · IEEE International Conference on Mechatronics and Automation (ICMA) · doi:10.1109/icma.2019.8816424 · Cited by 3
Digital twin driven factory design
Zhao, N., Guo, J.-P., & Zhao, H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818918-4.00008-7 · Cited by 3
Information Modelling Method of As-built Process Data
Dai, S. L., Zhao, G. L., Yu, Y., & Bao, Q. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1824/1/012013 · Cited by 4
“believed that DT is a method to complete the convergence between physical and cyber spaces [7].”
MethodSteps for Data Exchange between Real Environment and Virtual Simulation Environment
Ferro, R., Sajjad, H., & Ordóñez, R. E. C. (2021) · International Conference on Computer Modeling and Simulation (ICCMS) · doi:10.1145/3474963.3474988 · Cited by 4
“Fei Tao (2018) points out that it is necessary to collect data that accurately represent the production system for the proper functioning of the DT cone, for this is the integration of this technology with BIG Data [14, 25].”
BackgroundMethodA DTMEs-Based Digital Twin System Construction Method For Smart FactoryPreprint
Xia, L., Lu, J., Zhang, H., Xu, M., Li, Z., & Wang, S. (2021) · Research Square · doi:10.21203/rs.3.rs-633211/v1 · Cited by 5
“[10] Tao F, Zhang M (2017) Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart”
BackgroundDigital Twin Concept and its Applications: A Review
Tao, J., & Nor, N. M. (2024) · Journal of Engineering Science and Technology Review · doi:10.25103/jestr.172.22 · Cited by 2
“…[18], [63], [64], [65], [66], [67], [68], [69], [19] Aerospace [70], [71], [72], [73], [74], [75], [30], [76], [77], [78], [7], [79], [80], [81], [82], [83], [84] Smart City [85], [16], [86], [87], [88], [49], [89], [90], [91] Education [92],[93], [94] In aerospace, DT is used to detect defects.”
Digital Twin Technology: Concepts and Applications
Tripathi, D. R., & Nishad, D. K. (2019) · Türk bilgisayar ve matematik eğitimi dergisi · doi:10.61841/turcomat.v10i3.14627 · Cited by 3
Verification of Digital Twins using Classical and Statistical Model Checking
Gunasekaran, R., & Haverkort, B. R. H. M. (2025) · Electronic Proceedings in Theoretical Computer Science · doi:10.4204/eptcs.418.2 · Cited by 2
“Since its inception in 2002, DTs have been provided with several definitions [23, 13, 12, 8, 25, 16]; most of these definitions focus on the existence of a virtual replica of a physical object or process (often called actual entity (AE)), which comprises several interconnected models and which…”
Design Principles for Food Heritage Digital Twins
Mendes, I., Monteiro, J., & Barata, J. (2025) · Lecture notes in information systems and organisation · doi:10.1007/978-3-031-87880-0_10 · Cited by 2
Zhu, Y., Cheng, Y., Qi, Q., & Tao, F. (2025) · Procedia CIRP · doi:10.1016/j.procir.2025.02.211 · Cited by 2
Self-citationA Digital Twin Modeling Method for the Full Lifecycle of Discrete Product
Jiang, L., Su, S., Chu, C., Chen, C., & Wang, W. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15874-4 · Cited by 2
“…the DT of the factory is performed to realize the two-way real mapping and real-time interaction between the virtual factory and the real factory [19], integrate and fuse the twin data of all elements of the factory and all streams of the whole business, and iterate the operation of all aspects…”
Human digital twin for long-distance relationships: a scoping review
Li, Q., Kocaballi, A. B., & Garcia, J. A. (2025) · Behaviour and Information Technology · doi:10.1080/0144929x.2025.2523446 · Cited by 2
“…three interaction paradigms: system-to-system interaction (e.g. executing intelligent operations between physical objects in DTs during production (Tao and Zhang 2017)), human-to-system interaction (e.g. operators remotely controlling machines using robotic arms (Tsokalo et al. 2019)) and…”
Bao, Z., Siraj, S. B., & Halili, S. H. (2025) · International Conference on Control and Robot Technology (ICCRT) · doi:10.1109/iccrt63554.2025.11072760 · Cited by 2
“This is enabled by combining mixed reality and the Internet of Things [18].”
Yang, S. U., Chen, X., & Wang, X. (2025) · Applied Sciences · doi:10.3390/app15158253 · Cited by 2
Wan, Y. (2025) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.70246 · Cited by 2
Zare, A., & Lazarova‐Molnar, S. (2025) · International Conference on Automation and Computing (ICAC) · doi:10.1109/icac65379.2025.11196463 · Cited by 2
“These variations, which vary from a simple repositioning to a complete shop floor overhaul, can have a significant impact on the corresponding DT models and their validation [32, 33].”
Macer, D. B., Jennions, I. K., & Avdelidis, N. P. (2025) · Applied Sciences · doi:10.3390/app152011136 · Cited by 2
Wu, C., Cai, J., Liu, X., Shi, H., & Fu, J. (2025) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2025.2599550 · Cited by 3
Real-Time AI-Driven Digital Twins for Smart City Infrastructure and Urban Resilience
Sundaram, N. K., Thakur, S. S., Kumar, Y. J. N., Mohamed, H., Kumar, V. P. A., Al-Dulaimi, H. W., & Saadi, M. A. M. A. (2025) · International Conference on Cyber Resilience (ICCR) · doi:10.1109/iccr67387.2025.11292405 · Cited by 2
Sornoza-Parrales, D., Vera, G. O. B., Poveda, M. L. P., & Macías-Parrales, T. M. (2025) · Frontiers in Virtual Reality · doi:10.3389/frvir.2025.1725875 · Cited by 3
“IoT sensors provide real-time data from physical environments, which are integrated into BIM models and visualized through AR and VR applications, improving capabilities including fi re safety monitoring and situational awareness (Tao and Zhang, 2017; Chen et al., 2021; Mihai et al., 2022).”
A Machine Tool Digital Twin to Implement Smartness in Discrete Production Environment
Paul, S., Manna, N., Roy, S., & Jana, T. K. (2026) · Lecture notes on multidisciplinary industrial engineering · doi:10.1007/978-981-96-8323-9_14 · Cited by 2
Karlova-Sergieva, V. A., Grasiani, B., & Nikolova, N. (2026) · Sensors · doi:10.3390/s26020613 · Cited by 4
Tripathi, V., Chattopadhyaya, S., & Dewangan, S. (2026) · Scientific Reports · doi:10.1038/s41598-026-35726-9 · Cited by 2
Digital twins, supply chains, and sustainability: an overview
Bordeleau, F.-È., & Ülkü, M. A. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-32880-0.00005-x · Cited by 2
Towards Digital Twin Driven High-Reliability Power Electronic Converters
Notash, F. Y., He, J., & Li, H. (2026) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2026.3664414 · Cited by 3
“Based on the three-dimensional DT concept, the authors in [39] and [40] introduced a five-dimensional DT that incorporates five key elements: the physical system, its virtual replica, the data exchanged between them, the connection framework, and the services.”
Chavez, Z. B. R., Porcaro, A., Simone, M. C. D., Falco, D. D., & Guida, D. (2026) · Sustainability · doi:10.3390/su18052269 · Cited by 2
Wang, H., Cao, L., Dang, G., Zhu, Z., Ma, S., & Yan, G. (2026) · Control Engineering Practice · doi:10.1016/j.conengprac.2026.106912 · Cited by 2
Next-generation digital twin model with unobtrusive RF multi-sensing for AI-based human monitoring
Khan, S., Alzaabi, A., Saied, I., Anwar, U., Khurshid, K., & Arslan, T. (2026) · Scientific Reports · doi:10.1038/s41598-026-43984-w · Cited by 3
“9, 10, 11, 12 and 13.”
Liao, C.-W., Thanh, N. V., & Tai, Y.-H. (2026) · Information · doi:10.3390/info17050500 · Cited by 2
Review of tool condition monitoring in milling of thin-walled parts based on digital twin technology
Gao, S., Zhang, X., Yu, F., Wen, L., & Yu, T. (2026) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-026-06457-9 · Cited by 3
“Meanwhile, Tao et al. [48 ] presented a comprehensive analysis of the DT work - shop, a pioneering platform that facilitates seamless, high-fidelity interactions between physical and virtual spaces.”
Zheng, J. H., Kobayashi, Y., Takahashi, Y., Yanagida, T., Sato, T., & Hitaka, D. (2020) · International Conference on System of Systems Engineering · doi:10.1109/sose50414.2020.9130560 · Cited by 2
“Also, cooperating with equipment simulators, MLCP can be used for building a digital twin [25] for smart manufacturing.”
MethodResearch on Guilin Smart Cultural Tourism Service Scenario based on Digital Twin Technology
Yang, J., Peng, Y., & Liang, H. (2021) · BCP Business & Management · doi:10.54691/bcpbm.v13i.51 · Cited by 2
“"The Era of Wisdom Cultural Travel"[3].”
Secure Smart City Infrastructure Using Digital Twin and Blockchain
Samanta, S., Sarkar, A., & Bulo, Y. (2022) · Lecture notes in networks and systems · doi:10.1007/978-981-19-0619-0_33 · Cited by 3
Qin, Z.-Y., Liang, S., & Liu, Q. (2022) · Scientific Programming · doi:10.1155/2022/4210927 · Cited by 2
Intelligent Tracking Technology of Light Source Based on Feedforward Inverse Compensation Control
Liu, Y., Qian, K., Li, Y., Yin, Q., & Zhu, C. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2351/1/012041 · Cited by 2
“When it comes to maximum power search mode which achieves maximum power output while there is power loss during the search, it needs to be corrected frequently [4-6].”
BackgroundDigital Twin Applications in Spacecraft Protection
Yavuz, H., & Konacaklı, E. (2023) · Springer eBooks · doi:10.1007/978-981-99-0252-1_14 · Cited by 2
Curriculum Design and Development for a New Digital Supply Chain Degree Programme in Singapore
Lin, W., & Low, M. Y. H. (2022) · IEEE International Conference on Teaching, Assessment, and Learning for Engineering · doi:10.1109/tale54877.2022.00155 · Cited by 2
Sequeira, D. Q., Bortoluzzi, S., & Tortato, U. (2023) · Revista SODEBRAS · doi:10.29367/issn.1809-3957.18.2023.210.132 · Cited by 3
A Digital Twin for Resilient Smart Manufacturing
Sánchez, M. A., Rossit, D. A., & Tohmé, F. (2023) · Springer eBooks · doi:10.1007/978-3-031-36121-0_71 · Cited by 2
Digital twin-driven motion trajectory tracking control of electromagnetic linear actuator
Guo, T., Chang, S., Wu, Y., & Xu, J. (2023) · doi:10.1117/12.3006459 · Cited by 2
“Until 2011, the US Air Force Research Laboratory and NASA collaborated to propose a digital twin for future aircraft, and then it really was attracted the attention, gradually supplemented and improved by scholars [2,5,6,7,8].”
BackgroundNjuguna, J., Sarwar, D., Laryea, E., & Far, A. H. (2023) · Emerald Group Publishing Limited eBooks · doi:10.1108/978-1-83753-022-920231007 · Cited by 2
Application of Parallel Triplets Based on Intelligent Collaborative Robots in Industry 5.0
Hu, B., Mao, J., Zhang, X., Liu, X., Qin, M., & Cheng, T. (2023) · IEEE International Conference on Digital Twins and Parallel Intelligence (DTPI) · doi:10.1109/dtpi59677.2023.10365418 · Cited by 2
“Additionally, there may be costs associated with purchasing and integrating the various technologies and systems that make up a CPSS[6].”
BackgroundResearch on Digital Simulation Technology of Satellite-Ground Wireless Channel Based on Digital Twin
Hu, J., Hao, Q., Zhang, B., & Liu, M. (2023) · International Conference on Communication Technology and Information Technology (ICCTIT) · doi:10.1109/icctit60726.2023.10435727 · Cited by 2
Study on intelligent assembly process planning and execution system based on digital twin
Wu, S., Wang, J., Jiang, H., & Xue, W. (2024) · Robotic Intelligence and Automation · doi:10.1108/ria-05-2023-0065 · Cited by 4
Research on Digital Twin Technology of Small Hydraulic System
Wang, L., Li, B., Zhang, K., Wang, K., Hao, H., & Huang, J. (2023) · International Conference on Fluid Power and Mechatronics · doi:10.1109/fpm57590.2023.10565471 · Cited by 2
“…On this basis, the Kalman filter algorithm is used to realize the effective fusion of the mechanism simulation model and the data-driven model [8,9,10], so that the twin model has better interpretability and higher precision; Finally, the Kalman filter algorithm is improved, so that the twin…”
MethodWlkata educational robots used in simulation in the laboratory conditions
Pekarčíková, M., Trebuňa, P., Kliment, M., & Dic, M. (2023) · Acta Simulatio · doi:10.22306/asim.v9i3.101 · Cited by 2
“Potential of creation and testing elements of digital factory in laboratory conditions [8-13] Robotic arm Wlkata Mirobot, Figure 1, consists of a base, connecting frames, gear stepper motors and limit switch sensors.”
BackgroundVirtual Equipment Modeling of Track Circuit in High-speed Railway Based on Digital Twin
Pan, S., Han, H., Yue, Q., & Zhang, W. (2024) · Chinese Control Conference (CCC) · doi:10.23919/ccc63176.2024.10662370 · Cited by 2
“In recent years, digital twin technology of rail transit has become a hot issue [1–9].”
BackgroundSundar, S., & Nitin, S. (2024) · Advances in computational intelligence and robotics book series · doi:10.4018/979-8-3693-5380-6.ch013 · Cited by 5
Kiener, C., Schwarzer, S., & Zimmermann, S. (2025) · IEEE Access · doi:10.1109/access.2025.3544140 · Cited by 4
“In the era of advancing digitalization [18] in the industry and service sectors, IT environments suitable for the use and development of IDTs [19] are increasingly being created.”
Noorsumar, G., Adhikari, S., Fjær, H. G., Jensen, Ø., & Meir, M. (2025) · The minerals, metals & materials series · doi:10.1007/978-3-031-80748-0_55 · Cited by 2
Design and modeling of process manufacturing-oriented digital twin system
Chen, J., Zhao, Y., Huo, D., Ma, Z., Xi, B., & Ma, C. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16284-2 · Cited by 5
“…encompasses the full lifecycle of the manufacturing process, facilitating rapid localization and analysis in various DTMS use scenarios; Tao et al. [10] proposed a digital twin shop-floor model based on digital twin technology, detailing the composition, operation mechanisms, and implementation…”
Edge-enabled distributed digital twins with embedded intelligence for smart aquaculture systems
Costa, D., Rocha, E. M., Costa, V. V., Rocha, M. M., & Marques, C. (2025) · Journal of Ambient Intelligence and Smart Environments · doi:10.1177/18761364251374713 · Cited by 3
“…in the context of industrial smart manufacturing, as fundamental tools in achieving the full integration of physical and digital spaces (Tao and Zhang, 2017), for enabling the monitoring, simulation, processing, and optimization of physical systems and processes (Føre et al., 2024; Lu…”
Liu, Z., Li, P., Xu, C., Zhao, J., Xin, M., & Tian, B. (2021) · International Conference on Energy, Electrical and Power Engineering (CEEPE) · doi:10.1109/ceepe51765.2021.9475710 · Cited by 2
From service to digital twin service
Qi, Q., Tao, F., & Nee, A. Y. C. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-91300-3.00006-1 · Cited by 4
Self-citationUX Evaluation of a Tractor Cabin Digital Twin Using Mixed Reality
Cavallaro, S., Prati, E., Grandi, F., Mangia, G., Pellicciari, M., & Peruzzini, M. (2022) · Advances in transdisciplinary engineering · doi:10.3233/atde220666 · Cited by 3
The Design Innovation of Shop Floor Paradigm Towards Smart Manufacturing
He, X., Yan, Y., Long, C., Xi, T., Wu, G., & Tang, S. (2022) · IEEE Advanced Information Technology, Electronic and Automation Control Conference (IAEAC) · doi:10.1109/iaeac54830.2022.9929861 · Cited by 2
“Some countries had put forward national development strategies[1], such as social 5.”
BackgroundIndustrial Revolutions and Supply Network 5.0
Nicoletti, B. (2023) · Springer eBooks · doi:10.1007/978-3-031-22032-6_3 · Cited by 4
A Hybrid Architecture of Digital Twin with Decision Support Layer for Industrial Maintenance
dos Santos, C. F., Netto, R. J. K., Kondo, R. E., Loures, E. D. F. R., Santos, E. A. P., & Szejka, A. L. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-17629-6_61 · Cited by 3
The Advancements and Prospects of Digital Twin Technology in the Military Domain
Wang, J., Yang, C., Zhao, Y., & Ji, S. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-9021-4_21 · Cited by 2
A tutorial on digital twins for predictive maintenance
Hu, Z. Y., Hu, C. K., & Hu, W. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15476-8.00005-8 · Cited by 3
Öz, S., Ibrahim, B., Civriz, M., & Başar, P. (2024) · Global Knowledge, Memory and Communication · doi:10.1108/gkmc-12-2023-0507 · Cited by 3
Carrazco, D. I. C., Casco, E. R. G., Salazar-Torres, S. M., Zambrano, D. J. M., Bajaña, E. M. L., Burbano, W. F. Z., & Godoy, M. M. P. (2024) · Data & Metadata · doi:10.56294/dm2025384 · Cited by 2
Digital Twins in Logistics: Requirements, Application and Potentials
Zarnitz, S., & Straube, F. (2024) · Springer eBooks · doi:10.1007/978-3-658-45670-2_12 · Cited by 2
Natarajan, V. (2025) · Springer eBooks · doi:10.1007/978-981-96-5277-8_2 · Cited by 2
Panchali, S. H., Kavirayani, U. M., Mylavarapu, K. B., Pilli, J., Jannu, P. K., & Mohammad, J. A. (2022) · International Journal of AI BigData Computational and Management Studies · doi:10.63282/3050-9416.ijaibdcms-v3i1p117 · Cited by 13
Sheng, B., Zhao, F., Zhang, C., Yin, X., & Shu, Y. (2018) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0740-4 · Cited by 2
“…of smart manufacturing through the fast, efficient, accurate realization of fusion between physical space and information space (Tao and Zhang 2017; Tao et al. 2017), and the accurate reflection of the dynamic characteristics in the actual production line through the virtual production line, which…”
BackgroundZhao, C., Chen, M., Wang, L., & Li, Z. (2020) · Advances in transdisciplinary engineering · doi:10.3233/atde200194 · Cited by 2
“Many new technologies and concepts related information are flourishing such as Industry [3], IoT [4][5], CPS [6], Big data [7], Digital-twin [8][9].”
BackgroundData driven and Running simulation system for intelligent workshop
Liu, Y., Niansong, Z., Aimin, W., & Hailong, H. (2020) · World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM) · doi:10.1109/wcmeim52463.2020.00061 · Cited by 2
Reimagining the Digital Twin: Powerful Use Cases for Industry 4.0
Sivarethinamohan, R., & Sujatha, S. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-0942-8_16 · Cited by 2
The Verification for RRC System of Nuclear Power Plant Based on Digital Twins Technologies
Ping, J., Zhang, L., Zhou, C. F., Wang, C.-B., & Lu, C. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-3456-7_74 · Cited by 2
MMC Equivalent Modeling Method of AC/DC Hybrid System Based on Model-Data Hybrid Drive
Zhou, J., Chen, Y.-T., & Ran, L. (2021) · 2021 2nd International Conference on Electronics, Communications and Information Technology (CECIT) · doi:10.1109/cecit53797.2021.00135 · Cited by 3
Definitions and principles of digital twins
Fang, Z., Lu, Q., Xie, X., Parlikad, A. K., Schooling, J. M., & Pitt, M. (2022) · doi:10.1680/dtbe.65802.005 · Cited by 3
Bányai, T. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-15211-5_38 · Cited by 3
Digital Twin and Extended Reality: Strategic Approach and Practical Implementation
Rocca, R. L., Santacruz, R. F. B., Sassanelli, C., Rosa, P., Fumagalli, L., & Negri, E. (2023) · Springer handbooks · doi:10.1007/978-3-030-67822-7_34 · Cited by 4
Industrial Maintenance and the Digital Twin—An Architectural Assessment
Helmann, A., Neto, A. A., Deschamps, F., & Loures, E. D. F. R. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-17629-6_73 · Cited by 2
How to define a business-specific smart manufacturing solution
Sánchez, M. A., Rossit, D. A., & Carbone, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-32-399208-4.00013-1 · Cited by 2
Yu, P., Song, J., Sampat, M., & Hanes, E. (2023) · Advances in environmental engineering and green technologies book series · doi:10.4018/978-1-6684-6366-6.ch007 · Cited by 2
Chang, X., & Jia, X. (2022) · International Conference on Intelligent Manufacturing and Industrial Big Data (ICIMIBD) · doi:10.1109/icimibd58123.2022.00026 · Cited by 2
Analysis and Implementation of Dual Pick and Place Operation in Smart Manufacturing Domain
Pradhan, S., Rajarajan, K., & Shetty, A. S. (2018) · International Conference on Electronics, Communication and Aerospace Technology (ICECA) · doi:10.1109/iceca.2018.8474600 · Cited by 2
“In [1], a concept development has been done based on digital twin or dual shop floor (DTS) and smart manufacturing includes interaction, interconnection, control and management in smart manner.”
BackgroundTechnical enablers for the IoT
Liberg, O., Sundberg, M., Wang, Y.-P. E., Bergman, J., Sachs, J., & Wikström, G. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102902-2.00017-0 · Cited by 5
Digital twin driven design evaluation
Wang, L., Tao, F., Liu, A., & Nee, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818918-4.00005-1 · Cited by 2
Self-citationMethodology for Construction of Multi-approach Based Digital Twin in Strategic Communication
Zaķe, M., Majore, G., Krūmiņš, G., & Zakis, Z. (2021) · IEEE Workshop on Advances in Information, Electronic and Electrical Engineering (AIEEE) · doi:10.1109/aieee51419.2021.9435626 · Cited by 2
“Tao and Zhang [28] also suggests in publication that a complete digital twin should include physical part, virtual part, connection, data, and service.”
BackgroundClosed-Loop Digital Twin for the Product LifecyclePreprint
Durão, L. F. C. S., Zancul, E. D. S., & Schützer, K. (2021) · Research Square · doi:10.21203/rs.3.rs-186777/v1 · Cited by 2
Blockchain-Based Fine-Grained Digital Twin Sharing Framework for Socialized Cloud ManufacturingPreprint
Li, M., Harish, A. R., & Huang, G. Q. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4125479 · Cited by 2
Research on the job shop scheduling problem based on digital twin and proximal policy optimizationPreprint
Liu, L., Guo, K., Gao, Z., & Li, J. (2022) · Research Square · doi:10.21203/rs.3.rs-1355780/v1 · Cited by 2
Barbosa, J. M. V., Gómez, Ó. D. C., & García, J. A. G. (2023) · Preprints.org · doi:10.20944/preprints202309.0899.v1 · Cited by 2
Yan, C. Y., & Peng, W. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4767705 · Cited by 2
Lim, K. Y. H. (2023) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/176020 · Cited by 8
Applications of Flexible Manufacturing Systems in Industry: A Review
Chugh, M., Jassi, J., Zaid, M. H. M., & Madan, A. K. (2022) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2022.41925 · Cited by 1
The Application Exploration of Digital Twin in the Space Launch Site
Hongwei, C., Bo, Z., Hui, Y., & Xu, L. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-9423-3_7 · Cited by 1
Bochkarev, P. Y., & Reshetnikova, E. (2023) · Science intensive technologies in mechanical engineering · doi:10.30987/2223-4608-2023-30-36 · Cited by 1
Research on Job Simulation and Online Monitoring System of Distribution Robot Based on Digital Twin
Gan, Z., Huang, G., Zhang, J., & Liu, X. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-1439-5_65 · Cited by 1
Precise Docking Algorithm for Typical Barrel Component Docking Process
Kang, Y., Xiao, H., Chen, Y., Song, S., & Wang, T. (2023) · International Conference on Computer, Control and Robotics (ICCCR) · doi:10.1109/icccr56747.2023.10193979 · Cited by 1
“Digital twin is an intelligent manufacturing technology that integrates the physical and information worlds, with real-time synchronization, faithful mapping and high fidelity [5,6].”
BackgroundDigital Twins of Bridges: Characteristics of a Framework Leading to Practical Implementations
Korus, K., Salamak, M., & Winkler, J. (2024) · ASCE International Conference on Computing in Civil Engineering (i3CE) · doi:10.1061/9780784485231.072 · Cited by 1
Development of a Digital Twin of a Collaborative Robot-Manipulator
Epifantseva, K., & Epifantsev, I. R. (2024) · International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM) · doi:10.1109/icieam60818.2024.10553809 · Cited by 1
“It is shown that backward substitution and computation of the angles of the actuated joints closes the solution path and provides a complete map of the space of implement configurations and motor space [13].”
BackgroundModeling of Digital Twin Framework for Management of Human Resources in Industry 4.0
Khalifa, R. B. (2024) · Advances in chemical and materials engineering book series · doi:10.4018/979-8-3693-2999-3.ch005 · Cited by 1
FPDTN: Fast Plant Digital Twin Model for IoT Automated Greenhouse Based on NeRF
Xu, F., He, J., & Huang, H. (2024) · International Conference on Intelligent Computing and Robotics (ICICR) · doi:10.1109/icicr61203.2024.00013 · Cited by 1
Digital Twin of a 7-Dof Bionic Arm
Rodda, S. C., Sanga, S., Praveen Raj, R., Naveen Kumar, S., Nekkanti, S. C., Sailesh, P., & Dash, A. K. (2024) · IEEE International Conference on Electronics, Computing and Communication Technologies (CONECCT) · doi:10.1109/conecct62155.2024.10677166 · Cited by 1
“One of the specific challenges to achieving smart manufacturing with these strategies depends on how to converge the manufacturing physical world and the virtual world [3].”
Background
Metadata
- Authors
- Tao, F., & Zhang, M.
- Affiliations
- Beihang University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 20418-20427
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2757110387
- Cited by
- 1,397
- References
- 40
- Citations by year
- 2026: 155 · 2025: 179 · 2024: 178 · 2023: 232 · 2022: 207 · 2021: 180 · 2020: 135 · 2019: 90 · 2018: 40 · 2017: 1
- FWCI
- 79.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51522501)
- National Key Research and Development Program of China (2016YFB1101700)
- Beijing Nova Program in China (Z161100004916063)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, smart manufacturing, shop floor, Industry 4.0, cyber-physical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.