Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
With the developments and applications of the new information technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, a smart manufacturing era is coming. At the same time, various national manufacturing development strategies have been put forward, such as Industry 4.0, Industrial Internet, manufacturing based on Cyber-Physical System, and Made in China 2025. However, one of specific challenges to achieve smart manufacturing with these strategies is how to converge the manufacturing physical world and the virtual world, so as to realize a series of smart operations in the manufacturing process, including smart interconnection, smart interaction, smart control and management, etc. In this context, as a basic unit of manufacturing, shop-floor is required to reach the interaction and convergence between physical and virtual spaces, which is not only the imperative demand of smart manufacturing, but also the evolving trend of itself. Accordingly, a novel concept of digital twin shopfloor (DTS) based on digital twin is explored and its four key components are discussed, including physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor digital twin data. What is more, the operation mechanisms and implementing methods for DTS are studied and key technologies as well as challenges ahead are investigated, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“tracking a product throughout its life cycle [76]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [76]
In the citing paper
“Research indicates that integrating Digital Twins into building management can result in energy savings of up to 30% [10,24,25].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“A Digital Twin is a virtual replica of a physical system, designed to simulate its behavior and performance under varying conditions [9,10].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“The accuracy and effectiveness of DTs heavily depend on the quality of collected data, and inconsistent or incomplete data can lead to inaccurate predictions and inefficient decision-making.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“As a result, maintenance costs in energy-intensive industries have been reduced by 20 to 30 percent.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 1×
“[37], [38].”
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Cyber-physical Production Systems: Roots, Expectations and R&D Challenges
Monostori, L. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.115 · Cited by 1,215
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“[37], [38].”
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480 · cited 1×
“3) Construction and management of SDTD Technologies involve data cleaning, data integration, data fusion, two-way mirrors between physical and virtual data, shop-floor big data [40], etc.”
BackgroundSelf-citationRFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462 · cited 1×
“build an RFID-enabled real-time manufacturing execution system, which provides more practical planning and scheduling decisions for shop-floor [25].”
BackgroundTao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2232936 · Cited by 362 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationSyberfeldt, A., Danielsson, O., & Gustavsson, P. (2017) · IEEE Access · doi:10.1109/access.2017.2703952 · Cited by 221 · cited 1×
“After that, layout optimization [28], production planning [29], [30] and fault diagnosis [31], etc.”
Method
Research works printed but not linked: 1
- tao, 2017, Digital twin workshop: A new paradigm for future workshop, Comput Integr Manuf Syst, 23, 1
Cited by
Items 801–900 of 1,426
Digital twin—The dream and the reality
Kortelainen, J., Minav, T. A., & Tammi, K. (2023) · Frontiers in the Internet of Things · doi:10.3389/friot.2023.1108777 · Cited by 10
“Taking the Tuegel et al. (2011) vision of a DT, the forest machine would have a digital representation as a structural analysis model with 100–1,000 billion degrees-of-freedom.”
BackgroundMethodInfluentialLi, J., Dong, H., Long, W., Wang, P., & Wang, X. (2023) · Ships and Offshore Structures · doi:10.1080/17445302.2023.2238391 · Cited by 7
“2) For product manufacturing, DT applications always are considered in the DT manufacturing system, like the DT production line(Zhang, Liu, Chen, Zhang, & Leng, 2017), and the DT shop fl oor(Tao & Zhang, 2017), as they are components of the system-level DT applications.”
Tang, J., Hu, Y., Shang, Y., Xu, M., Zhou, X., & Zhang, J. (2025) · Nano Energy · doi:10.1016/j.nanoen.2025.111002 · Cited by 7
TWINVAX: conceptual model of a digital twin for immunisation services in primary health care
El-Warrak, L. D. O., & de Farias, C. M. (2025) · Frontiers in Public Health · doi:10.3389/fpubh.2025.1568123 · Cited by 8
Costa, D., Pereira, D. L., Brochado, Â. F., & Rocha, E. M. (2025) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2025.05.012 · Cited by 7
Guerra-Zubiaga, D. A., Aksu, M., Richards, G., & Kuts, V. (2025) · Applied Sciences · doi:10.3390/app15137049 · Cited by 27
Battissacco, B. C., Azzolini, W., dos Santos, C. H., & Romano, A. L. (2025) · Journal of Simulation · doi:10.1080/17477778.2025.2531045 · Cited by 9
“Tao and Zhang (2017) emphasize that DT adoption is an unavoidable trend.”
InfluentialReal-Time Progress Monitoring of Bricklaying
Magdy, R., Hamdy, K., & Essawy, Y. A. S. (2025) · Buildings · doi:10.3390/buildings15142456 · Cited by 8
Bibliometric Study of Digital Twin for Sustainable Cities and Society
Bhatia, M., & Kumar, V. (2025) · ACM Journal on Computing and Sustainable Societies · doi:10.1145/3748820 · Cited by 8
“The networked clusters, which comprise ten clusters with participating nations and membership, are displayed in Table 17.”
A platform to support the fast development of digital twins for agricultural holdings
Laguna, J., Suaza-Medina, M. E., Béjar, R., Lacasta, J., & Zarazaga-Soria, F. J. (2025) · Computers in Industry · doi:10.1016/j.compind.2025.104347 · Cited by 7
A technology readiness assessment approach for Digital Twin implementation in SMEs
Larmelina, S. D., SILVA, A. L. D., & RISSO, L. A. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16370-5 · Cited by 7
Digital twin-enabled deep learning for real-time fire situation awareness
Tang, T., Zhao, C., Liu, X., & Sun, S. (2025) · The Visual Computer · doi:10.1007/s00371-025-04131-0 · Cited by 8
“Subsequently, Tao and Zhang [17] proposed that a comprehensive digital twin comprises five key components: physical entities, virtual entities, interconnections, data, and services, with data being fundamental for generating new knowledge.”
Liu, X., Wang, H., Han, X., Zan, Y., Zhang, J., & Liu, G. (2025) · Advanced Engineering Informatics · doi:10.1016/j.aei.2025.103912 · Cited by 7
Gregory, C., Rabah, S., Chapurlat, V., Burčiar, F., & Herchlová, M. (2025) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2025.101023 · Cited by 10
Chi, W., Wang, T., Zhang, J., Wang, Z., & Zhang, C. (2025) · Energies · doi:10.3390/en18236343 · Cited by 9
A review on integration of digital twins within industry 4.0
Tabet, W., Benfriha, K., & Bounab, B. (2026) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-026-02851-1 · Cited by 14
Analisis Bibliometrik pada Penerapan Artificial Intelligence di Smart Manufacturing
Daniaty, D., Firmansyah, B., Ardiansyah, A., & Efendi, T. (2022) · Seminar Nasional Official Statistics · doi:10.34123/semnasoffstat.v2022i1.1120 · Cited by 7
KOÇAK, A., & Yıldız, A. (2022) · Gazi Üniversitesi Fen Bilimleri Dergisi Part C Tasarım ve Teknoloji · doi:10.29109/gujsc.1170021 · Cited by 10
Digital twin and artificial intelligence in industries
Salini, S., & Ivy, B. P. U. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99205-3.00014-6 · Cited by 9
Ren, Z., Wan, K., Zhang, R., & Peng, Q. (2023) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2023.3317792 · Cited by 7
THE EFFECT OF OUTDOOR INQUIRY PROGRAM FOR LEARNING BIOLOGY USING DIGITAL TWIN TECHNOLOGY
Byeon, J.-H., & Kwon, Y.-J. (2023) · Journal of Baltic Science Education · doi:10.33225/jbse/23.22.781 · Cited by 11
“However, digital twin technology that implements real-world information equally in the virtual world is providing a solution to these deposits of virtual reality due to recent improvements in image processing hardware and artificial intelligence technology (Liu et al., 2021; Tao & Zhang, 2017).”
BackgroundA Digital Twin for part quality prediction and control in plastic injection molding
Rehmer, A., Klute, M., Heim, H., & Kroll, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-32-395207-1.00014-7 · Cited by 7
Optimized IEEE 802.11ax for smart warehouses
Fanari, L., Morejón, D., Bilbao, I., Iradier, E., Montalbán, J., & Angueira, P. (2024) · Ad Hoc Networks · doi:10.1016/j.adhoc.2024.103415 · Cited by 7
M-AGEW: Empowering Outdoor Workouts with Data-Driven Augmented Reality Assistance
Stacchio, L., Armandi, V., Hajahmadi, S., Donatiello, L., & Marfia, G. (2024) · IEEE International Conference on Artificial Intelligence and eXtended and Virtual Reality (AIxVR) · doi:10.1109/aixvr59861.2024.00050 · Cited by 9
“…data to detect the completion of physical activities (i.e., activity detection [34]), create a dynamic training schedule, and also prevent injures [35]–[37] and examine early adopted AR headsets (e.g., MagicLeap 2, Apple Vision Pro) that possess improved specs for outdoor visibility (e.g.,…”
BackgroundMulti-stage cyber-physical fusion methods for supporting equipment’s digital twin applications
Zheng, Q. S., Ding, G., Xie, J., Li, Z., Qin, S., Wang, S., Zhang, H., & Zhang, K. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13668-8 · Cited by 7
“The theory was first proposed by Gill [27] of National Science Foundation.”
Oke, A. E., Arowoiya, V. A., Chan, M., & Oyediran, A. O. (2024) · International Journal of Construction Management · doi:10.1080/15623599.2024.2411885 · Cited by 11
“…digital twin technology, including enhanced efficiency, improved monitoring and control, shorter development cycles, better decision-making, and increased safety for operators (Schleich et al. 2017; Tao and Zhang 2017; Patriarca et al. 2018; Tao et al. 2018; Wang et al. 2019; Rasheed et al. 2020).”
Digital twin technology in microgrid systems
Eskandari, A., Emamian, M., Nedaei, A., & Aghaei, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-14070-9.00005-6 · Cited by 11
Leveraging Digital Twin Technologies for Public Space Protection and Vulnerability Assessment
Stefanidou, A., Cani, J., Papadopoulos, T., Grammatikis, P. I. R., Sarigiannidis, P. G., Varlamis, I., & Papadopoulos, G. T. (2024) · IEEE International Conference on Big Data (BigData) · doi:10.1109/bigdata62323.2024.10825359 · Cited by 9
“The most widely adopted type of such virtual representations comprises the concept of ‘Digital Twins’ (DTs) [6], [7], which allows in-depth understanding and modeling of system behaviors and interactions.”
Digital Twin-Based Federated Transfer Learning for Anomaly Detection in Industrial IoT
Belay, M. A., Rasheed, A., & Rossi, P. S. (2025) · IEEE Symposium on Computational Intelligence for Engineering Solutions (CIES) · doi:10.1109/cies64955.2025.11007631 · Cited by 11
“These digital twins offer performance optimization and predictive maintenance, enabling anomaly prediction and detection, resulting in reduced operational costs and downtime [23].”
Digital Twin-Based Task Rescheduling for Robotic Assembly Line
Shen, T., Xu, W., Yao, B., Liu, J., & Hu, Y. (2022) · International Conference on Computer Supported Cooperative Work in Design (CSCWD) · doi:10.1109/cscwd54268.2022.9776253 · Cited by 7
Abadi, M., Abadi, C., Abadi, A., & Ben-Azza, H. (2022) · International Journal of Advanced Computer Science and Applications · doi:10.14569/ijacsa.2022.0130811 · Cited by 10
“) that form the services necessary to execute the commands preventing from the physical and virtual spaces [10].”
BackgroundMethodInfluentialDigital Twins: Making It Feasible for SMEs
da Silva, E. R., Neto, A. A., & Nielsen, C. P. (2022) · Springer eBooks · doi:10.1007/978-3-031-15428-7_30 · Cited by 7
Towards Developing a Digital Twin for a Manufacturing Pilot Line: An Industrial Case Study
Kakavandi, F., Gomes, C. Â. G., de Reus, R., Badstue, J., Jensen, J. L., Larsen, P. G., & Iosifidis, A. (2023) · Springer eBooks · doi:10.1007/978-981-99-0252-1_2 · Cited by 8
Syberfeldt, A., Lämkull, D., Högberg, D., Hanson, L. Å., & Lind, A. (2023) · International Journal of Services Operations and Informatics · doi:10.1504/ijsoi.2023.10055937 · Cited by 9
A Digital Twin Based Residual Stress Prediction Method for Turbine Blades
Mou, S., Bu, K., Liu, J., Ren, S., Zhang, R., & Bai, B. (2023) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2569/1/012067 · Cited by 7
“Essentially, a DT is a dynamic virtual model that accurately simulates and represents the properties, behaviors, and rules of a physical entity across multiple dimensions, time scales, disciplines, and physical quantities, within the context of its real environment [8].”
BackgroundA real-time traffic congestion-avoidance framework for smarter cities
Thejaswini, R. S. S., & Rajaraajeswari, S. (2018) · AIP conference proceedings · doi:10.1063/1.5078968 · Cited by 8
A Referenced Cyber Physical System for Compressor Manufacturing
Cao, J., Wang, J.-L., & Lu, J. (2020) · MATEC Web of Conferences · doi:10.1051/matecconf/202030602005 · Cited by 7
“[13][14] explored the concept of digital twin workshop, designed the composition and operation mechanism of DTS, expounded four characteristics and five key technologies of DTS, and provided basic theoretical support for the application of digital twin in production and manufacturing in 2017.”
BackgroundResearch on Communication Technology of Ship Integrated Monitoring System Based on OPC
Luo, X. (2020) · International Conference on Intelligent Transportation, Big Data & Smart City (ICITBS) · doi:10.1109/icitbs49701.2020.00115 · Cited by 7
Digital twin: a concept in evolution
Durão, L. F. C. S., Zancul, E. D. S., & Schützer, K. (2021) · Product Management & Development · doi:10.4322/pmd.2021.003 · Cited by 8
“This kind of data is deduced from physical data and is defined as virtual data (Moyne & Iskandar, 2017; Tao & Zhang, 2017).”
MethodDigital Twin-Based Research in the Maritime Industry: A Brief Survey
Mao, R., Li, Y., & Zhang, H. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10311986 · Cited by 8
“Tao et al. [1] explored a new concept of digital twin shop (DTS) based on DT, and discussed its key components.”
BackgroundLee, A., Negrin, D. A. M., & Cleophas, L. (2024) · Annual Modeling and Simulation Conference (ANNSIM) · doi:10.23919/annsim61499.2024.10732658 · Cited by 6
“Our definition of DTs follows the conceptual model of Tao et al. [2].”
MethodScalable System to Support a Digital Twin of a Stone Factory Production Line
Francisco, D., Ribeiro, R., Rodrigues, N., Gonçalves, A., Marto, A., & Ferreira, I. (2025) · IEEE Access · doi:10.1109/access.2025.3531940 · Cited by 6
“This technology can be applied to several sectors such as industrial manufacturing [8], [9], [10], farming industry [11], product redesign [11], electric cars [12], in the smart cities, case of Singapore, to test policy virtually.”
Digital twin for magnetic levitation systems: General architecture design and uncertainty analysis
Wang, Y., Huang, Y., Viancha, S., & Khamesee, M. B. (2025) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2025.103134 · Cited by 6
Xia, W., Liu, X., Yue, C., Geng, B., Zhang, J., & Guo, Y. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16689-z · Cited by 6
“Through data fusion analysis, cloud decision-making, and iterative optimization, the virtual model can enhance the capabilities of the physical entity [14, 15].”
Rodriguez, E., & Álvares, A. J. (2025) · IEEE Access · doi:10.1109/access.2025.3641205 · Cited by 8
“Tao et al. [73] advanced this concept through a five-dimensional DTw model that integrates physical and virtual components with data, connections, and service layers.”
The Concept of a Hierarchical Digital Twin
Jarzyńska, M., Nierychlok, A., & Olender-Skóra, M. (2026) · Applied Sciences · doi:10.3390/app16020605 · Cited by 6
Lee, S., Choi, J., Lee, S., Yun, B., Shim, J., Lee, J.-H., & Cho, K. H. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.154351 · Cited by 6
Imran, Nouioua, M., & Mekid, S. (2026) · Scientific Reports · doi:10.1038/s41598-026-42165-z · Cited by 6
“More recent studies introduced cyber physical integration concepts, including digital twins, to support shop-floor visibility, simulation, and decision support 12,13 .”
Hasan, M. M. (2026) · doi:10.63125/hg8tvk79 · Cited by 6
Wang, P., Yang, W.-A., & You, Y. (2022) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-02021-z · Cited by 6
“Some enabling technical frameworks such as AR (Ong et al., 2011; Paelke, 2014; Ragni et al., 2018; Wang et al., 2016) and Digital Twin (DT) (Redelinghuys et al., 2020; Tao & Zhang, 2017; Tong et al., 2020; Zhao et al., 2020) are used to implement CPS.”
MethodZuo, J., Zhou, L. H., Qiao, L., Ding, X., Wu, Q., He, X., & Peng, X. (2023) · Applied Composite Materials · doi:10.1007/s10443-022-10096-3 · Cited by 7
“0, such as intelligent manufacturing [23–25] and intelligent workshops [26, 27], the research on the application of digital twins to equipment health-state monitoring and structural response prediction is limited.”
BackgroundAntoniazzi, M. A. S., & Godinho, E. Z. (2023) · Revista SODEBRAS · doi:10.29367/issn.1809-3957.18.2023.210.191 · Cited by 6
Digital-Twin-Driven Intelligent Insulated-Gate Bipolar Transistor Production Lines
Zhang, X., Liu, X., Song, Y., Li, X., Huang, W., Zhou, Y., & Liu, S. (2024) · Sensors · doi:10.3390/s24020612 · Cited by 6
“Tao et al. proposed a digital-twin shop-floor consisting of a physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor data [29].”
BackgroundZhang, Y., Zhang, D., Yan, J., Liu, Z., & Jin, T. (2024) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2024.102763 · Cited by 7
Zhang, L., Zhuang, C., Tian, Y. Z., & Yao, M. (2024) · Sensors · doi:10.3390/s24113670 · Cited by 6
Contrasting Capabilities: A Comparative Analysis of Simulation and Digital Twin Technologies
Wooley, A., & Silva, D. F. (2024) · Simulation foundations, methods and applications · doi:10.1007/978-3-031-69107-2_2 · Cited by 9
Huang, H., Xu, X. W., & Ji, T. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-025-02634-0 · Cited by 6
Research on Application of Virtual-Real Fusion Technology in Smart Manufacturing
Lei, W., Yong, W., Haigen, Y., Yu, H., Xu, W., Han, L., & Kejia, J. (2018) · IEEE International Conference on Software Engineering and Service Science (ICSESS) · doi:10.1109/icsess.2018.8663865 · Cited by 6
“driven by digital twin and proposed a new method for manufacturing resource supply-demand matching based on complex networks and Internet of Things (loT), and a fourlayered architecture for implementing this method is designed[7].”
MethodA Reference Model for Evolving Digital Twins and Its Application to Cases in the Manufacturing Floor
Ahuett‐Garza, H., & Coronado, P. D. U. (2019) · Smart and Sustainable Manufacturing Systems · doi:10.1520/ssms20190049 · Cited by 6
Design Methodology Framework for Cyber-Physical Products
Al-Fedhly, H., & ElMaraghy, W. H. (2020) · International Journal of Industry and Sustainable Development · doi:10.21608/ijisd.2020.101620 · Cited by 6
“Yet, there is no machine able to make decision in a way human can, especially in synthesis level [1, 2].”
BackgroundLyu, T., Zhao, Q. H., Lin, H., & Xu, Y. (2021) · IEEE Access · doi:10.1109/access.2021.3112101 · Cited by 7
“aspects, such as intensified competition in the global market and rising resource costs [4].”
BackgroundChen, J., Deng, R., Guo, Y., Lin, W., Cao, W. Q., & Guan, K. (2021) · IEEE International Conference on Computer and Communications (ICCC) · doi:10.1109/iccc54389.2021.9674420 · Cited by 6
A-star Algorithm for Robot Path Planning Based on Digital Twin
Xuan, D. T., Nam, L. G., Viet, D. T., & Vu, T. T. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-981-19-1968-8_8 · Cited by 6
How Useful is Learning in Mitigating Mismatch Between Digital Twins and Physical Systems?
Cronrath, C., & Lennartson, B. (2022) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2022.3231386 · Cited by 9
“Yet, convergence [4], [9], [11] and evolution [5], [12], [13] of digital model and physical system are postulated key properties of digital twins.”
BackgroundOn the potential of low-cost instrumentation for digitalization of legacy machine tools
Durigan, P. D. T., Shiki, S. B., Barbosa, G. F., & Antonialli, A. Í. S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11946-5 · Cited by 8
Digital Twins in AEC Infrastructure and Building Management Systems
Oditallah, M., Alam, M. M., & Palaneeswaran, E. (2023) · International conference on civil infrastructure and construction/Proceedings of the ... International conference on civil infrastructure and construction · doi:10.29117/cic.2023.0094 · Cited by 7
Application of a Digital Twin Model in the Packaging Process of the Panel Furniture Industry
Wang, G., Xiong, X., Ying, M., & Xu, X. (2024) · Forest Products Journal · doi:10.13073/fpj-d-24-00001 · Cited by 9
Iyer, S. V., Sangwan, K. S., & Dhiraj (2024) · Springer series in advanced manufacturing · doi:10.1007/978-3-031-68271-1_1 · Cited by 6
A Levels of Service (LOS) Digital Twin for Potable Water Infrastructure Systems
Dodanwala, T. C., & Ruparathna, R. (2024) · Lecture notes in civil engineering · doi:10.1007/978-3-031-61519-1_2 · Cited by 8
Jiang, P., Liu, C., Li, P., & Shi, H. (2019) · IEEE International Conference on Automation Science and Engineering (CASE) · doi:10.1109/coase.2019.8843010 · Cited by 6
Maximum Flow of Complex Manufacturing Networks
Omar, Y. M., & Plapper, P. (2019) · Procedia CIRP · doi:10.1016/j.procir.2020.01.005 · Cited by 6
The digital twin model of vehicle containers to provide an ergonomic handling mechanism
Abed, A. M., Seddek, L. F., Elattar, S., & Gaafar, T. S. (2022) · South Florida Journal of Development · doi:10.46932/sfjdv3n2-030 · Cited by 7
Guan, S., Hu, W., Lei, Z., & Zhou, H. (2022) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.12670 · Cited by 9
A K-Chart based implementation framework to attain lean & agile manufacturing
Zaheer, S., Amjad, M. S., Rafique, M. Z., & Khan, M. A. (2020) · International journal of production management and engineering · doi:10.4995/ijpme.2020.12935 · Cited by 14
“Author Name & Year Methodology Findings(Authors’ points of view) Womack and Jones (1996) Case Study The following five steps are effective to ensure leanness: - Defining the customer value - Defining value stream - Subjecting the value stream to a flow - Introducing a pull system - Continuous determination towards ach…”
BackgroundDigital Twin and Its Application for the Maintenance of Aircraft
Wang, T., & Liu, Z. (2021) · Springer eBooks · doi:10.1007/978-3-030-48200-8_7-1 · Cited by 6
Digital Twin with a Perspective from Manufacturing Industry
Wang, H., Chen, S., Sami, M. S. U. I., Rahman, F., & Tehranipoor, M. M. (2020) · Springer eBooks · doi:10.1007/978-3-030-64448-2_2 · Cited by 10
Product Innovation Design Process Model Based on Functional Genes Extraction and Construction
Wang, H., Zhang, P., Zhang, Z., Zhang, Y., & Wang, Y. (2022) · Applied Sciences · doi:10.3390/app122412990 · Cited by 6
Zhang, J. Z., Bakar, A., Humphry, A., Javid, F., Nadeau, P., Ebrahimi, M., Butscher, A., Tessier, A., Rodriguez, J., & Farhat, C. (2024) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2025.117863 · Cited by 7
Hybrid Knowledge-Based Digital Twin for Cutters of Machine Tools
Yuan, D., Guo, H., Lin, X., & Zhu, K. (2025) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2025.3556067 · Cited by 5
“Tao et al. [7] provided a paradigm for the construction of the DT shop floor.”
Liu, H., Wen, W., Gou, W., Lu, X., Ma, H., Zhu, L., Zhang, M., Wu, S., & Guo, X. (2025) · Agriculture · doi:10.3390/agriculture15111217 · Cited by 5
“Driven by real-time data, DT reproduces physical states in a virtual space, forecasts potential risks, and performs closed-loop control, thereby enhancing operational reliability and management efficiency [8,9].”
Self-citationDigital twin platform for real-time data communication in UAV environment
Bae, C.-H., Choi, E.-T., Kang, S., Ahn, R., & Lee, S. (2025) · Future Generation Computer Systems · doi:10.1016/j.future.2025.108078 · Cited by 8
Richter, F., Campbell, K., & Riedl, J. (2025) · Data & Policy · doi:10.1017/dap.2025.10027 · Cited by 8
“While manufacturing remains the primary domain for DT research (Grieves, 2014; Grieves and Vickers, 2017; Tao and Zhang, 2017), the technology is increasingly applied in other fields, including agriculture (Johannsen et al., 2021; Pylianidis et al., 2021; Verdouw et al., 2021), energy and utilities…”
Multi-agent systems for digital twin shop-floor resilient control
Zhang, C., Tao, F., Ma, X., & Cheng, Y. (2025) · Chinese Journal of Mechanical Engineering · doi:10.1016/j.cjme.2025.100206 · Cited by 5
Self-citationDigital twin enabling net-zero energy building integrated grid digital transformation
Hannan, M. A., Arsad, A. Z., Jang, G., Ker, P. J., Al-Shetwi, A. Q., Begum, R. A., & Mahlia, T. M. I. (2026) · Energy Strategy Reviews · doi:10.1016/j.esr.2026.102148 · Cited by 6
Stieler, D., Kosse, S., Forman, P., Kovaleva, D., Manny, A., Teschemacher, T., Stindt, J., Lindner, M., Vogt, O., Betker, V., et al. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.116044 · Cited by 7
Barbosa, J. M. V., Gómez, Ó. D. C., & García, J. A. G. (2023) · Lecture notes in networks and systems · doi:10.1007/978-3-031-36957-5_3 · Cited by 5
A Digital Twin of Hot Pumping Waxy Oil Through a Main Pipeline
Zhapbasbayev, U. K., Bekibayev, T., Ramazanova, G., & Akasheva, Z. (2025) · Energies · doi:10.3390/en18010202 · Cited by 6
“A digital twin displays the production processes, providing a dynamic digital model of a physical object’s historical and current behavior [26,27].”
Clarifying digital Twin buzzword: a novel generic evaluation model
Liu, Z., Araghi, S. N., Sarkar, A., & Karray, M. H. (2026) · Digital Twin · doi:10.1080/27525783.2026.2694877 · Cited by 7
Tao, F., Zhang, M., & Nee, A. Y. C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817630-6.00004-7 · Cited by 5
Self-citationData Exchange of Digital Twins Based on AML in Space Science Experiment Equipment
Guqi, P., & Zhong, H. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/816/1/012021 · Cited by 5
Case Study of Digital Twin-based Human-robot Collaborative Work-cell for Satellite Assembly
Wang, Y., Feng, J., Liu, J., Liu, X., & Wang, J. (2021) · IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) · doi:10.1109/ieem50564.2021.9672807 · Cited by 7
Enabling Digital Twins in Industry 4.0
Vitor, R., Keller, B., Barbosa, D. L. M., Diniz, D. N., Silva, M. C., Oliveira, R., & Delabrida, S. E. (2022) · Lecture notes in business information processing · doi:10.1007/978-3-031-08965-7_24 · Cited by 5
han, C., Zhou, G., zhang, C., yu, Y., & Ma, D. (2022) · Digital Twin · doi:10.12688/digitaltwin.17682.1 · Cited by 5
“Multi-access edge computing (MEC) is a network architecture that provides services and cloud computing functions required by users at an edge location that is closer to end users than data centers 11 .”
The study and development of UAV digital twin system
Yang, J., Huang, C., & Wang, J. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2366/1/012038 · Cited by 5
“However, the literature on equipment-level digital twin technology is rarely published [5, 6].”
BackgroundDigital twin based bearing fault simulation modeling strategy and display dynamics
Zhao, C., Zhang, Q., Wang, C., & Peng, H. (2023) · International Symposium on Autonomous Systems (ISAS) · doi:10.1109/isas59543.2023.10164348 · Cited by 7
“The research on digital twins mainly focuses on the design of intelligent manufacturing system models, such as AI algorithms [5].”
MethodLiterature Review And Comparison Of Digital Twin Frameworks In Manufacturing
Galli, E., Fani, V., Bandinelli, R., Lacroix, S., Duigou, J. L., Eynard, B., & Godart, X. (2023) · European Conference on Modelling and Simulation (ECMS) · doi:10.7148/2023-0428 · Cited by 5
Optimizing Digital Twin Design Through a QFD and AHP-Based Selection Methodology
Liu, J., Vatn, J., & Yin, S. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10312389 · Cited by 8
“They’re used in various industries like manufacturing [19], infrastructure [20], vehicles [21], buildings [22], and power systems [23].”
BackgroundA Human-Centric Design Method for Industrial Centrifugal Pump Based on Digital Twin
Shi, Y., Sheng, B.-Y., Zhu, J.-X., Chen, G., Zhang, T.-A., & Luo, R. (2023) · Processes · doi:10.3390/pr12010042 · Cited by 5
Digital twin evolution, application areas and enabling technology
Sama, N. U., Jhanjhi, N. Z., Humayun, M., & Rahman, A. U. (2024) · AIP conference proceedings · doi:10.1063/5.0168361 · Cited by 5
Horvath, A.-S., & Pouliou, P. (2024) · CRC Press eBooks · doi:10.1201/9781003425724-46 · Cited by 9
Metadata
- Authors
- Tao, F., & Zhang, M.
- Affiliations
- Beihang University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 20418-20427
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2757110387
- Cited by
- 1,397
- References
- 40
- Citations by year
- 2026: 155 · 2025: 179 · 2024: 178 · 2023: 232 · 2022: 207 · 2021: 180 · 2020: 135 · 2019: 90 · 2018: 40 · 2017: 1
- FWCI
- 79.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51522501)
- National Key Research and Development Program of China (2016YFB1101700)
- Beijing Nova Program in China (Z161100004916063)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, smart manufacturing, shop floor, Industry 4.0, cyber-physical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.