Digital Twin Shop-Floor: A New Shop-Floor Paradigm Towards Smart Manufacturing
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
With the developments and applications of the new information technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, a smart manufacturing era is coming. At the same time, various national manufacturing development strategies have been put forward, such as Industry 4.0, Industrial Internet, manufacturing based on Cyber-Physical System, and Made in China 2025. However, one of specific challenges to achieve smart manufacturing with these strategies is how to converge the manufacturing physical world and the virtual world, so as to realize a series of smart operations in the manufacturing process, including smart interconnection, smart interaction, smart control and management, etc. In this context, as a basic unit of manufacturing, shop-floor is required to reach the interaction and convergence between physical and virtual spaces, which is not only the imperative demand of smart manufacturing, but also the evolving trend of itself. Accordingly, a novel concept of digital twin shopfloor (DTS) based on digital twin is explored and its four key components are discussed, including physical shop-floor, virtual shop-floor, shop-floor service system, and shop-floor digital twin data. What is more, the operation mechanisms and implementing methods for DTS are studied and key technologies as well as challenges ahead are investigated, respectively.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“tracking a product throughout its life cycle [76]”
From Digital Twins in the IIoT: Current Practices and Future Directions Toward Industry 5.0 (2025) · cites this paper as [76]
In the citing paper
“Research indicates that integrating Digital Twins into building management can result in energy savings of up to 30% [10,24,25].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“A Digital Twin is a virtual replica of a physical system, designed to simulate its behavior and performance under varying conditions [9,10].”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“The accuracy and effectiveness of DTs heavily depend on the quality of collected data, and inconsistent or incomplete data can lead to inaccurate predictions and inefficient decision-making.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
In the citing paper
“As a result, maintenance costs in energy-intensive industries have been reduced by 20 to 30 percent.”
From Analysis of Digital Twin Applications in Energy Efficiency: A Systematic Review (2025) · cites this paper as [10]
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727 · cited 1×
“[37], [38].”
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
RajratnaKharat, V. B. P. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493930 · Cited by 1,784
DIGITAL TWIN: MANUFACTURING EXCELLENCE THROUGH VIRTUAL FACTORY REPLICATION
Prof. RajratnaKharat*1, V. B. (2018) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1493929 · Cited by 1,753
Cyber-physical Production Systems: Roots, Expectations and R&D Challenges
Monostori, L. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.03.115 · Cited by 1,215
Reengineering aircraft structural life prediction using a digital twin
Tuegel, E. J., Ingraffea, A. R., Eason, T. G., & Spottswood, S. M. (2011) · International Journal of Aerospace Engineering · doi:10.1155/2011/154798 · Cited by 1,119 · cited 1×
“[37], [38].”
Cloud manufacturing: a computing and service-oriented manufacturing model
Tao, F., Zhang, L., Venkatesh, V. C., Luo, Y., & Cheng, Y. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411405575 · Cited by 574 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationBig Data in product lifecycle management
Li, J., Tao, F., Cheng, Y., & Zhao, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7151-x · Cited by 480 · cited 1×
“3) Construction and management of SDTD Technologies involve data cleaning, data integration, data fusion, two-way mirrors between physical and virtual data, shop-floor big data [40], etc.”
BackgroundSelf-citationRFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462 · cited 1×
“build an RFID-enabled real-time manufacturing execution system, which provides more practical planning and scheduling decisions for shop-floor [25].”
BackgroundTao, F., LaiLi, Y., Xu, L., & Zhang, L. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2232936 · Cited by 362 · cited 1×
“0, Industrial Internet, Made in China 2025, service oriented manufacturing [1], [2] and cloud manufacturing [3], [4]) to prepare for the next”
BackgroundSelf-citationSyberfeldt, A., Danielsson, O., & Gustavsson, P. (2017) · IEEE Access · doi:10.1109/access.2017.2703952 · Cited by 221 · cited 1×
“After that, layout optimization [28], production planning [29], [30] and fault diagnosis [31], etc.”
Method
Research works printed but not linked: 1
- tao, 2017, Digital twin workshop: A new paradigm for future workshop, Comput Integr Manuf Syst, 23, 1
Cited by
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871
“resents the physical entity; VE represents the virtual entity; Ss represents the services for both PE and VE; DD stands for the DT data; and CN means the connection of different parts [12], [74].”
BackgroundInfluentialSelf-citationDigital twin: Enabling technologies, challenges and open research
Fuller, A., Fan, Z., Day, C., & Barlow, C. (2020) · IEEE Access · doi:10.1109/access.2020.2998358 · Cited by 2,965
“Again, down to the issue of having no standardised Digital Twin modelling methods [91].”
BackgroundMethodCharacterising the Digital Twin: A systematic literature review
Jones, D., Snider, C., Nassehi, A., Yon, J., & Hicks, B. (2020) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2020.02.002 · Cited by 2,422
“All papers that cite one of three seminal papers, Grieves [33,34] or Tao et al. paper [88] where also reviewed.”
BackgroundMethodInfluentialReview of digital twin about concepts, technologies, and industrial applications
Liu, M., Fang, S., Dong, H., & Xu, C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.017 · Cited by 1,875
Lu, Y., Liu, C., Wang, K. I.-K., Huang, H., & Xu, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101837 · Cited by 1,624
“[8] Shop floor Digital Twin of shop floor to support smart operations in the manufacturing process”
BackgroundMethodDigital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716
“physical world, have been being strengthened [28].”
BackgroundSelf-citationTao, F., Qi, Q., Wang, L., & Nee, A. Y. C. (2019) · Engineering · doi:10.1016/j.eng.2019.01.014 · Cited by 1,487
“The first and most important step is to create high-fidelity virtual models to realistically reproduce the geometries, physical properties, behaviors, and rules of the physical world [22].”
BackgroundSelf-citationEnabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Self-citationA survey on digital twin: definitions, characteristics, applications, and design implications
Barricelli, B. R., Casiraghi, E., & Fogli, D. (2019) · IEEE Access · doi:10.1109/access.2019.2953499 · Cited by 1,480
“Though the DT model is generally viewed as a three-dimensional structure where physical entities and their virtual models communicate through proper connections, Tao and Zhang [57], Tao et al. [58], while describing their concept of DT shop floor, gave more importance to the intelligent applications (called services) e…”
BackgroundMethodInfluentialDigital twin paradigm: A systematic literature review
Semeraro, C., Lezoche, M., Panetto, H., & Dassisti, M. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103469 · Cited by 986
“This has provided a possibility to conduct plans and operations more efficiently and effectively (Tao and Zhang, 2017).”
BackgroundDigital Twin for maintenance: A literature review
Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020) · Computers in Industry · doi:10.1016/j.compind.2020.103316 · Cited by 741
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Zheng, T., Ardolino, M., Bacchetti, A., & Perona, M. (2021) · International Journal of Production Research · doi:10.1080/00207543.2020.1824085 · Cited by 728
“…techniques can verify the correctness and security of planning and scheduling decisions by comparing the actual job shop statement and digital twin job shop statement (Cimino, Negri, and Fumagalli 2019; Guizzi, Falcone, and De Felice 2019; Tao and Zhang 2017; Zhang, Ding, Zou, et al.2019).”
BackgroundMethodLim, K. Y. H., Zheng, P., & Chen, C.-H. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01512-w · Cited by 700
Zhuang, C., Liu, J., & Xiong, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1617-6 · Cited by 693
“Tao et al. [12, 37] proposed a digital twin shop-floor to realize the interaction and convergence be-tween physical and virtual spaces.”
BackgroundMethodDigital twin-based sustainable intelligent manufacturing: a review
He, B., & Bai, K.-J. (2021) · Advances in Manufacturing · doi:10.1007/s40436-020-00302-5 · Cited by 621
Smart Manufacturing and Intelligent Manufacturing: A Comparative Review
Wang, B., Tao, F., Fang, X., Liu, C., Liu, Y., & Freiheit, T. (2021) · Engineering · doi:10.1016/j.eng.2020.07.017 · Cited by 542
Self-citationA systematic review of a digital twin city: A new pattern of urban governance toward smart cities
Deng, T., Zhang, K., & Shen, Z.-J. (. (2021) · Journal of Management Science and Engineering · doi:10.1016/j.jmse.2021.03.003 · Cited by 532
A BIM-data mining integrated digital twin framework for advanced project management
Pan, Y., & Zhang, L. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103564 · Cited by 518
Towards the future of smart electric vehicles: Digital twin technology
Bhatti, G., Mohan, H., & Raja Singh, R. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110801 · Cited by 533
A hybrid predictive maintenance approach for CNC machine tool driven by Digital Twin
Luo, W., Hu, T., Ye, Y., Zhang, C., & Wei, Y. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101974 · Cited by 519
A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 509
“Along with the development of advanced technologies, such as augmented reality [37], virtual reality [38], cloud computing and so on, the concept and development of digital twin become more clear and specific [39].”
Digital Twin Service towards Smart Manufacturing
Qi, Q., Tao, F., Zuo, Y., & Zhao, D. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.103 · Cited by 485
Self-citationA comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
“2018; Qi and Tao 2018; Tao and Zhang 2017; Qi et al.”
BackgroundIndustrial IoT in 5G environment towards smart manufacturing
Cheng, J., Chen, W., Tao, F., & Lin, C.-L. (2018) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2018.04.001 · Cited by 456
Self-citationDing, K., Chan, F. T. S., Zhang, X., Zhou, G., & Zhang, F. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1566661 · Cited by 456
Knowledge-driven digital twin manufacturing cell towards intelligent manufacturing
Zhou, G., Zhang, C., Li, Z., Ding, K., & Wang, C. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1607978 · Cited by 423
“Qi and Tao (2018) introduced a serial digital twin-driven frameworks for smart manufacturing, including digital twin-driven design (Tao, Sui, et al. 2018), manufacturing (Tao and Zhang 2017), service (Tao, Cheng, et al. 2018) and prognostics and health management (Tao, Zhang, et al. 2018).”
BackgroundXia, K., Sacco, C., Kirkpatrick, M., Saidy, C., Nguyen, L., Kircaliali, A., & Harik, R. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.06.012 · Cited by 406
A survey on AI-driven digital twins in Industry 4.0: smart manufacturing and advanced robotics
Huang, Z., Shen, Y., Li, J., Fey, M., & Brecher, C. (2021) · Sensors · doi:10.3390/s21196340 · Cited by 418
Kamble, S. S., Gunasekaran, A., Parekh, H., Mani, V., Belhadi, A., & Sharma, R. (2022) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2021.121448 · Cited by 381
Digital Twin for the Oil and Gas Industry: Overview, Research Trends, Opportunities, and Challenges
Wanasinghe, T. R., Wroblewski, L., Petersen, B. K., Gosine, R. G., James, L. A., De Silva, O., Mann, G. K. I., & Warrian, P. J. (2020) · IEEE Access · doi:10.1109/access.2020.2998723 · Cited by 388
“The three-component DT framework was later extended to a five-component framework, which includes physical space, virtual space, DT data fusion module, service systems, and connection/interaction between these four modules (refer to FIGURE 3) [124].”
MethodDigital twin for smart manufacturing, A review
Soori, M., Arezoo, B., & Dastres, R. (2023) · Sustainable Manufacturing and Service Economics · doi:10.1016/j.smse.2023.100017 · Cited by 326
Digital twin driven human–robot collaborative assembly
Bilberg, A., & Malik, A. A. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.011 · Cited by 395
A survey of smart product-service systems: Key aspects, challenges and future perspectives
Zheng, P., Wang, Z., Chen, C.-H., & Pheng Khoo, L. (2019) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.100973 · Cited by 377
Liu, X., Jiang, D., Tao, B., Xiang, F., Jiang, G., Sun, Y., Kong, J., & Li, G. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101876 · Cited by 351
Towards new-generation human-centric smart manufacturing in Industry 5.0: A systematic review
Zhang, C., Wang, Z., Zhou, G., Chang, F., Ma, D., Jing, Y., Cheng, W., Ding, K., & Zhao, D. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102121 · Cited by 366
A Review of Data-Driven Decision-Making Methods for Industry 4.0 Maintenance Applications
Bousdekis, A., Lepenioti, K., Apostolou, D., & Mentzas, G. (2021) · Electronics · doi:10.3390/electronics10070828 · Cited by 334
“A digital twin can be used to run simulations throughout the design, build, and operation lifecycle [90].”
MethodDigital Twin: A Comprehensive Survey of Security Threats
Alcaraz, C., & Lopez, J. (2022) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2022.3171465 · Cited by 340
“This aspect is also considered in [126], where the importance of detecting inconsistencies between models is clearly highlighted.”
BackgroundDesign, Modeling and Implementation of Digital Twins
Segovia, M., & Garcia-Alfaro, J. (2022) · Sensors · doi:10.3390/s22145396 · Cited by 332
“[61] propose that a DT has five parts: a PO, its VO and their connections, data and services.”
Simulation in industry 4.0: A state-of-the-art review
de Paula Ferreira, W., Armellini, F., & De Santa-Eulalia, L. A. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106868 · Cited by 333
Human-centric artificial intelligence architecture for industry 5.0 applications
Rožanec, J. M., Novalija, I., Zajec, P., Kenda, K., Tavakoli Ghinani, H., Suh, S., Bian, S., Veliou, E., Papamartzivanos, D., Giannetsos, T., et al. (2023) · International Journal of Production Research · doi:10.1080/00207543.2022.2138611 · Cited by 314
“…computing, and artificial intelligence, among others), and paradigms (e.g., Cyber-Physical Systems (Lee (2006); Rajkumar et al. (2010); Xu and Duan (2019)), and Digital Twins (Grieves (2015); Grieves and Vickers (2017); Tao and Zhang (2017))), to enable innovative manufacturing functionalities.”
BackgroundDigital Twin Enhanced Dynamic Job-Shop Scheduling
Zhang, M., Tao, F., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.008 · Cited by 337
Self-citationThe modelling and operations for the digital twin in the context of manufacturing
Bao, J., Guo, D., Li, J., & Zhang, J. (2019) · Enterprise Information Systems · doi:10.1080/17517575.2018.1526324 · Cited by 347
“…aspect of digital twin-based modelling, a number of studies have been carried out, including theoretical research on digital twin workshop (Tao and Zhang 2017; Zhuang, Liu, and Xiong 2018), digital twin-driven product design, manufacturing and service (Schleich et al. 2017; Tao et al. 2018), as…”
BackgroundWang, J., Li, Y., Gao, R. X., & Zhang, F. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.004 · Cited by 317
Digital Twins From Smart Manufacturing to Smart Cities: A Survey
Mylonas, G., Kalogeras, A., Kalogeras, G., Anagnostopoulos, C., Alexakos, C., & Munoz, L. (2021) · IEEE Access · doi:10.1109/access.2021.3120843 · Cited by 314
“In [27] it is proposed that the DT comprises five dimensions: physical part, virtual part, connection, data and service.”
BackgroundAlexopoulos, K., Nikolakis, N., & Chryssolouris, G. (2020) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2020.1747642 · Cited by 309
“In the same direction, Tao and Zhang (2017) propose the concept of Digital Twin Shop-Floor that can provide an e ff ective way to reach the physical-virtual convergence.”
BackgroundZhou, X., Xu, X., Liang, W., Zeng, Z., Shimizu, S., Yang, L. T., & Jin, Q. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3061419 · Cited by 308
“More importantly, as the digitalization of machinery and production systems becomes the basis of smart manufacturing, DT is viewed as the biggest technology trend and most promising technological direction for realizing real-time monitoring, diagnosis, prognosis, and maintenance in Industry 4.0 [5].”
BackgroundInfluentialEvolution and future of manufacturing systems
ElMaraghy, H., Monostori, L., Schuh, G., & ElMaraghy, W. (2021) · CIRP Annals · doi:10.1016/j.cirp.2021.05.008 · Cited by 290
“Throughout the development towards Smart Manufacturing, important key issues include IIoT, cloud computing, edge computing and fog computing, digital twins [181,198], digital shadows [174],”
BackgroundDigital twin modeling method based on biomimicry for machining aerospace components
Liu, S., Bao, J., Lu, Y., Li, J., Lu, S., & Sun, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.014 · Cited by 310
A Survey on Digital Twin for Industrial Internet of Things: Applications, Technologies and Tools
Xu, H., Wu, J., Pan, Q., Guan, X., & Guizani, M. (2023) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2023.3297395 · Cited by 304
“They proposed a five-dimensional digital twin model [14], [33], and workshop applications based on digital twin [34], [35].”
MethodOmrany, H., Al-Obaidi, K. M., Husain, A., & Ghaffarianhoseini, A. (2023) · Sustainability · doi:10.3390/su151410908 · Cited by 251
Digital twins for collaborative robots: A case study in human-robot interaction
Malik, A. A., & Brem, A. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102092 · Cited by 284
Digital twin in manufacturing: conceptual framework and case studies
Onaji, I., Tiwari, D., Soulatiantork, P., Song, B., & Tiwari, A. (2022) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2022.2027014 · Cited by 272
“…of intelligent components within factory floors, Internet of Things (IoT), sensor data fusion and cloud computing (CC) technologies has given birth to a new era of manufacturing most often called smart manufacturing/digitised manufacturing (Tao and Zhang 2017; Yun, Park, and Kim 2017).”
BackgroundMethodInfluentialDigital Twins in Pharmaceutical and Biopharmaceutical Manufacturing: A Literature Review
Chen, Y., Yang, O., Sampat, C., Bhalode, P., Ramachandran, R., & Ierapetritou, M. (2020) · Processes · doi:10.3390/pr8091088 · Cited by 278
“The development of virtual models is often costly and challenging due to the lack of a complete understanding of the physical process [93].”
BackgroundRequirements of the Smart Factory System: A Survey and Perspective
Mabkhot, M. M., Al-Ahmari, A. M., Salah, B., & Alkhalefah, H. (2018) · Machines · doi:10.3390/machines6020023 · Cited by 282
Framework for a digital twin in manufacturing: Scope and requirements
Shao, G., & Helu, M. (2020) · Manufacturing Letters · doi:10.1016/j.mfglet.2020.04.004 · Cited by 292
Jiang, H., Qin, S., Fu, J., Zhang, J., & Ding, G. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.05.012 · Cited by 279
Blockchain-based data management for digital twin of product
Huang, S., Wang, G., Yan, Y., & Fang, X. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.01.009 · Cited by 278
Digital-Twin-Based Job Shop Scheduling Toward Smart Manufacturing
Fang, Y., Peng, C., Lou, P., Zhou, Z., Hu, J., & Yan, J. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2938572 · Cited by 271
“On the one hand, through the establishment of a DT workshop [30], the working status and task progress of the production lines in the physical”
BackgroundIndustry 4.0: Emerging themes and future research avenues using a text mining approach
Galati, F., & Bigliardi, B. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.04.018 · Cited by 257
Human Digital Twin for Fitness Management
Barricelli, B. R., Casiraghi, E., Gliozzo, J., Petrini, A., & Valtolina, S. (2020) · IEEE Access · doi:10.1109/access.2020.2971576 · Cited by 259
“The digital-physical twins interaction is based on a ‘‘closed-loop’’ [2], [3], which refers to the continuous exchange of data between the cyber and physical worlds in order to continuously optimize the physical side.”
BackgroundAdvanced Manufacturing in Industry 5.0: A Survey of Key Enabling Technologies and Future Trends
Xiang, W., Yu, K., Han, F., Fang, L., He, D., & Han, Q.-L. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2023.3274224 · Cited by 245
Jia, W., Wang, W., & Zhang, Z. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101706 · Cited by 248
“proposed the five-dimension model of the digital twin, including physical entity, a virtual entity, service system, digital twin data, and connection network, among which virtual entity includes geometry model, physics model, behavior model, and rule model [5].”
BackgroundYi, Y., Yan, Y., Liu, X., Ni, Z., Feng, J., & Liu, J. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.04.013 · Cited by 253
Nara, E. O. B., da Costa, M. B., Baierle, I. C., Schaefer, J. L., Benitez, G. B., do Santos, L. M. A. L., & Benitez, L. B. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.07.018 · Cited by 238
Digital twin: Data exploration, architecture, implementation and future
Dihan, M. S., Akash, A. I., Tasneem, Z., Das, P., Das, S. K., Islam, M. R., Islam, M. M., Badal, F. R., Ali, M. F., Ahamed, M. H., et al. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e26503 · Cited by 217
“Digital twins in the manufacturing industry facilitate the generation of substantial volumes of real-time data derived from sensors, machinery, and production lines [155].”
BackgroundIndustry 4.0 Implementation Challenges and Opportunities: A Managerial Perspective
Bajic, B., Rikalovic, A., Suzic, N., & Piuri, V. (2021) · IEEE Systems Journal · doi:10.1109/jsyst.2020.3023041 · Cited by 224
Naseri, F., Gil, S., Barbu, C., Cetkin, E., Yarimca, G., Jensen, A. C., Larsen, P. G., & Gomes, C. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113280 · Cited by 217
“The common feature of DT frameworks is the use of services that can be integrated into the platform [89,90].”
BackgroundA digital twin-driven approach for the assembly-commissioning of high precision products
Sun, X., Bao, J., Li, J., Zhang, Y., Liu, S., & Zhou, B. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101839 · Cited by 234
Qian, C., Liu, X., Ripley, C., Qian, M., Liang, F., & Yu, W. (2022) · Future Internet · doi:10.3390/fi14020064 · Cited by 211
Digital Twin for Supply Chain Coordination in Modular Construction
Lee, D., & Lee, S. (2021) · Applied Sciences · doi:10.3390/app11135909 · Cited by 218
“Despite its promising potential for supply chain management, existing digital twin research is mainly found in the contexts of product operation and shop floor management [13,14].”
BackgroundMethodMicrogrid Digital Twins: Concepts, Applications, and Future Trends
Bazmohammadi, N., Madary, A., Vasquez, J. C., Mohammadi, H. B., Khan, B., Wu, Y., & Guerrero, J. M. (2022) · IEEE Access · doi:10.1109/access.2021.3138990 · Cited by 233
“Although the birthplace of twinning is in aerospace and aviation industries, it rapidly found its applications in manufacturing [2], [8]–[10], petrochemical [11], [12], and automotive systems [13], [14], urbanization and smart cities [15], [16], healthcare system [17] for elderly healthcare ser-”
BackgroundThe advance of digital twin for predictive maintenance: The role and function of machine learning
Chen, C., Fu, H., Zheng, Y., Tao, F., & Liu, Y. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.10.010 · Cited by 193
“Based on the existing work [88], a DT generic framework for PdM is proposed in Fig.”
MethodSelf-citationA Requirements Driven Digital Twin Framework: Specification and Opportunities
Moyne, J., Qamsane, Y., Balta, E. C., Kovalenko, I., Faris, J., Barton, K., & Tilbury, D. M. (2020) · IEEE Access · doi:10.1109/access.2020.3000437 · Cited by 226
“DTs are used today in many industrial areas such as product design, production, and health monitoring [31], [32], [33], [34], [35], [36], [37], [38], [39], [40], [41].”
BackgroundYou, Z., & Feng, L. (2020) · IEEE Access · doi:10.1109/access.2020.3007206 · Cited by 224
“The manufacturing industry has a similar concept called the ‘‘digital twin,’’ a virtual model of the physical product created in a digital way to simulate its behaviors in real-world environments [20].”
BackgroundVillalonga, A., Negri, E., Biscardo, G., Castano, F., Haber, R. E., Fumagalli, L., & Macchi, M. (2021) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2021.04.008 · Cited by 214
Digital twin: a state-of-the-art review of its enabling technologies, applications and challenges
Hu, W., Zhang, T., Deng, X., Liu, Z., & Tan, J. (2021) · Journal of Intelligent Manufacturing and Special Equipment · doi:10.1108/jimse-12-2020-010 · Cited by 211
Nikolakis, N., Alexopoulos, K., Xanthakis, E., & Chryssolouris, G. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1529430 · Cited by 218
“…to applying the digital twin in manufacturing applications puts more focus on either representing entities (Grieves 2014a; Söderberg et al. 2017; Tao and Zhang 2017), such as machines, production lines, robots, or on modelling and simulating human processes by means of digital manikins (De…”
BackgroundWeb-based digital twin modeling and remote control of cyber-physical production systems
Liu, C., Jiang, P., & Jiang, W. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.101956 · Cited by 223
Digital Twin Reference Model Development to Prevent Operators’ Risk in Process Plants
Bevilacqua, M., Bottani, E., Ciarapica, F. E., Costantino, F., Di Donato, L., Ferraro, A., Mazzuto, G., Monteriù, A., Nardini, G., Ortenzi, M., et al. (2020) · Sustainability · doi:10.3390/su12031088 · Cited by 219
“In the literature, Digital Twin solutions have been developed to create a consistent improvement in efficiency [5], minimize failure rates [6], shorten development cycles [7] and open up new business opportunities [8].”
BackgroundTao, F., Cheng, J., & Qi, Q. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2759178 · Cited by 221
Self-citationModeling of Cloud-Based Digital Twins for Smart Manufacturing with MT Connect
Hu, L., Nguyen, N.-T., Tao, W., Leu, M. C., Liu, X. F., Shahriar, M. R., & Al Sunny, S. M. N. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.155 · Cited by 219
Perspectives on the future of manufacturing within the Industry 4.0 era
Hughes, L., Dwivedi, Y. K., Rana, N. P., Williams, M. D., & Raghavan, V. (2022) · Production Planning & Control · doi:10.1080/09537287.2020.1810762 · Cited by 199
Digital Twin in Industry 4.0: Technologies, Applications and Challenges
Pires, F., Cachada, A., Barbosa, J., Moreira, A. P., & Leitão, P. (2019) · 2019 IEEE 17th International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin41052.2019.8972134 · Cited by 209
“…virtual worlds is very difficult, namely due to the physical environment that has particular characteristics, such as variability, uncertainty and fuzziness, the different scales of the physical and virtual spaces, and the data from the different entities that is being continuously generated [27].”
BackgroundReal-time machining data application and service based on IMT digital twin
Tong, X., Liu, Q., Pi, S., & Xiao, Y. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01500-0 · Cited by 211
Digital twin-enabled smart modular integrated construction system for on-site assembly
Jiang, Y., Li, M., Guo, D., Wu, W., Zhong, R. Y., & Huang, G. Q. (2022) · Computers in Industry · doi:10.1016/j.compind.2021.103594 · Cited by 201
Digital twin to improve the virtual-real integration of industrial IoT
Jiang, Z., Guo, Y., & Wang, Z. (2021) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2020.100196 · Cited by 208
A digital twin-enhanced system for engineering product family design and optimization
Lim, K. Y. H., Zheng, P., Chen, C.-H., & Huang, L. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.08.011 · Cited by 202
Cyber-Physical-Social Systems: A State-of-the-Art Survey, Challenges and Opportunities
Zhou, Y., Yu, F. R., Chen, J., & Kuo, Y. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2019.2959013 · Cited by 203
“It is necessary to explore artificial intelligence techniques to analyze and process the big data [114].”
BackgroundModular based flexible digital twin for factory design
Guo, J., Zhao, N., Sun, L., & Zhang, S. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0953-6 · Cited by 206
“High fidelity to physical world is one of the most important features of digital twin (Grieves 2014, Tao 2017).”
BackgroundYin, S., Rodriguez-Andina, J. J., & Jiang, Y. (2019) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2019.2938025 · Cited by 206
“Digital twin techniques include not only the modeling of objects’ surface, envelope, material, and texture but also that of the dynamics, kinetics, and even the characteristics, features, interaction with the environment, and realization of the entire lifecycles [52]–[54].”
BackgroundLattanzi, L., Raffaeli, R., Peruzzini, M., & Pellicciari, M. (2021) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2021.1911003 · Cited by 185
“Few approaches have been proposed at theoretical level, one of these being the ‘Digital Twin Shop-floor’ (DTS) architecture, discussed in Tao and Zhang (2017) and in Tao et al. (2017).”
BackgroundInfluentialZhuang, C., Miao, T., Liu, J., & Xiong, H. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102075 · Cited by 199
DT-II:Digital twin enhanced Industrial Internet reference framework towards smart manufacturing
Cheng, J., Zhang, H., Tao, F., & Juang, C.-F. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101881 · Cited by 188
Self-citationDigital twins of human robot collaboration in a production setting
Malik, A. A., & Bilberg, A. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.10.047 · Cited by 191
“Tao [30] the virtual model is built in four layers i.”
MethodA New Concept of Digital Twin Supporting Optimization and Resilience of Factories of the Future
Bécue, A., Maia, E., Feeken, L., Borchers, P., & Praça, I. (2020) · Applied Sciences · doi:10.3390/app10134482 · Cited by 181
“In 2017, Zhang et al. [54] presented a new kind of DT-based model for individualized designing of hollow glass production line, combining the custom design theory, basic synchronization technology and an intelligent multi-objective optimization algorithm.”
BackgroundInfluentialPlatform-based servitization and business model adaptation by established manufacturers
Tian, J., Coreynen, W., Matthyssens, P., & Shen, L. (2022) · Technovation · doi:10.1016/j.technovation.2021.102222 · Cited by 186
Resource virtualization: A core technology for developing cyber-physical production systems
Lu, Y., & Xu, X. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.05.003 · Cited by 179
Blockchain-Based Digital Twins: Research Trends, Issues, and Future Challenges
Suhail, S., Hussain, R., Jurdak, R., Oracevic, A., Salah, K., Hong, C. S., & Matulevičius, R. (2022) · ACM Computing Surveys · doi:10.1145/3517189 · Cited by 167
“The blockchain can be used to record parameters and hyperparameters of ML and to log outcome in order to pinpoint trends in correct predictions.”
BackgroundMethodNguyen, T., Duong, Q. H., Nguyen, T. V., Zhu, Y., & Zhou, L. (2022) · International Journal of Production Economics · doi:10.1016/j.ijpe.2021.108381 · Cited by 172
Metadata
- Authors
- Tao, F., & Zhang, M.
- Affiliations
- Beihang University (CN)
- ORCID
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 20418-20427
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2757110387
- Cited by
- 1,397
- References
- 40
- Citations by year
- 2026: 155 · 2025: 179 · 2024: 178 · 2023: 232 · 2022: 207 · 2021: 180 · 2020: 135 · 2019: 90 · 2018: 40 · 2017: 1
- FWCI
- 79.69
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (51522501)
- National Key Research and Development Program of China (2016YFB1101700)
- Beijing Nova Program in China (Z161100004916063)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Flexible and Reconfigurable Manufacturing Systems
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Applied Advanced Technologies
- Keywords
- digital twin, smart manufacturing, shop floor, Industry 4.0, cyber-physical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.