The DOI matches its Crossref record; 84 of the 84 references it cites were found in a registry or an index.
Inductive Power Transfer
Open accessAbstract
Inductive power transfer (IPT) was an engineering curiosity less than 30 years ago, but, at that time, it has grown to be an important technology in a variety of applications. The paper looks at the background to IPT and how its development was based on sound engineering principles leading on to factory automation and growing to a $1 billion industry in the process. Since then applications for the technology have diversified and at the same time become more technically challenging, especially for the static and dynamic charging of electric vehicles (EVs), where IPT offers possibilities that no other technology can match. Here, systems that are ten times more powerful, more tolerant of misalignment, safer, and more efficient may be achievable, and if they are, IPT can transform our society. The challenges are significant but the technology is promising.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ahlbom, A. (1998) · Health Physics · Cited by 5,817
GUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING ELECTRIC AND MAGNETIC FIELDS (1 Hz TO 100 kHz)
(2010) · Health Physics · doi:10.1097/hp.0b013e3181f06c86 · Cited by 2,164
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Self-citationDevelopment of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
Self-citationLin, J., Saunders, R. A., Schulmeister, K., Söderberg, P. G., Stuck, B. E., Swerdlow, A. J., Taki, M., Veyret, B., Ziegelberger, G., Repacholi, M. H., et al. (2010) · HAL · Cited by 1,261
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationOptimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
A Frequency Control Method for Regulating Wireless Power to Implantable Devices
Si, P., Hu, A. P., Malpas, S., & Budgett, D. (2008) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2008.918284 · Cited by 582
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationLow, Z. N., Chinga, R. A., Tseng, R., & Lin, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2010110 · Cited by 528
Hui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.904025 · Cited by 439
Self-citationDesign and analysis of an adaptive transcutaneous power telemetry for biomedical implants
Wang, G., Liu, W., Sivaprakasam, M., & Kendir, G. A. (2005) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2005.852923 · Cited by 435
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Self-citationDesign of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
Design of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Self-citation10 kHz inductively coupled power transfer - concept and control
Green, A. W. (1994) · Proceedings of 5th International Conference on Power Electronics and Variable-Speed Drives · doi:10.1049/cp:19941049 · Cited by 300
On-Line Electric Vehicle using inductive power transfer system
Lee, S., Huh, J., Park, C., Choi, N.-S., Cho, G.-H., & Rim, C.-T. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5618092 · Cited by 277
Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Contactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
Zhong, W. X., Liu, X., & Hui, S. Y. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098379 · Cited by 263
Optimal Design of a Hybrid Winding Structure for Planar Contactless Battery Charging Platform
Liu, X., & Hui, S. Y. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911844 · Cited by 247
Compact contactless power transfer system for electric vehicles
Nagatsuka, Y., Ehara, N., Kaneko, Y., Abe, S., & Yasuda, T. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543313 · Cited by 245
A contactless electrical energy transmission system
Pedder, D. A. G., Brown, A. D., & Skinner, J. A. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744372 · Cited by 242
Investigating an LCL Load Resonant Inverter for Inductive Power Transfer Applications
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830098 · Cited by 242
Self-citationChoi, B., Nho, J., Cha, H., Ahn, T., & Choi, S. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822039 · Cited by 237
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
Self-citationDevelopment and evaluation of single sided flux couplers for contactless electric vehicle charging
Budhia, M., Covic, G. A., Boys, J. T., & Huang, C.-Y. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063826 · Cited by 232
Self-citationPower-Factor-Corrected Single-Stage Inductive Charger for Electric Vehicle Batteries
Egan, M. G., O'Sullivan, D. L., Hayes, J. G., Willers, M. J., & Henze, C. P. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.892996 · Cited by 202
Villa, J. L., Sallán, J., Llombart, A., & Sanz, J. F. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.05.009 · Cited by 201
A bipolar primary pad topology for EV stationary charging and highway power by inductive coupling
Covic, G. A., Kissin, M. L. G., Kacprzak, D., Clausen, N., & Hao, H. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6064008 · Cited by 197
Self-citationA Direct AC–AC Converter for Inductive Power-Transfer Systems
Li, H. L., Hu, A. P., & Covic, G. A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159397 · Cited by 188
Self-citationA New Concept: Asymmetrical Pick-Ups for Inductively Coupled Power Transfer Monorail Systems
Elliott, G. A. J., Covic, G. A., Kacprzak, D., & Boys, J. T. (2006) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.879619 · Cited by 172
Self-citationStudy on intelligent battery charging using inductive transmission of power and information
Hirai, J., Kim, T.-W., & Kawamura, A. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838106 · Cited by 172
Interphase Mutual Inductance in Polyphase Inductive Power Transfer Systems
Kissin, M. L. G., Boys, J. T., & Covic, G. A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020076 · Cited by 165
Self-citationThe design of a contact-less energy transfer system for a people mover system
Covic, G. A., Elliott, G., Stielau, O. H., Green, R. M., & Boys, J. T. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900035 · Cited by 165
Self-citationA new approach to power supplies for robots
Esser, A., & Skudelny, H.-C. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.90341 · Cited by 164
Contactless Power Delivery System for Mining Applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.363053 · Cited by 160
Resonant Contactless Energy Transfer With Improved Efficiency
Valtchev, S., Borges, B. V., Brandisky, K., & Klaassens, J. B. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003188 · Cited by 159
Liu, X., & Hui, S. (2007) · IEEE transactions on power electronics · doi:10.1109/tpel.2007.909301 · Cited by 159
Contactless power delivery system for mining applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1991.178024 · Cited by 156
A Series-Tuned Inductive-Power-Transfer Pickup With a Controllable AC-Voltage Output
Wu, H. H., Covic, G. A., Boys, J. T., & Robertson, D. J. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2052069 · Cited by 154
Self-citationContactless power and information transmission
Bieler, T. R., Perrottet, M., Nguyễn, V. Đ., & Perriard, Y. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.803017 · Cited by 146
Large air-gap coupler for inductive charger [for electric vehicles]
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE Transactions on Magnetics · doi:10.1109/20.800578 · Cited by 133
Design of an IGBT-based LCL-resonant inverter for high-frequency induction heating
Dieckerhoff, S., Ruan, M. J., & Doncker, R. W. D. (2003) · doi:10.1109/ias.1999.806017 · Cited by 123
Inductive coupler for contactless power transmission
Sergeant, P., & den Bossche, A. V. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070059 · Cited by 122
A Wireless Power Pickup Based on Directional Tuning Control of Magnetic Amplifier
Hsu, J.-U. W., Hu, A. P., & Swain, A. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020081 · Cited by 121
Chigira, M., Nagatsuka, Y., Kaneko, Y., Abe, S., Yasuda, T., & Suzuki, A. K. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6063778 · Cited by 113
Ahn, S., & Kim, J. (2011) · European Conference on Antennas and Propagation · Cited by 112
Inductive power coupling for an electric highway system
Bolger, J., Kirsten, F. A., & Ng, L. S. (1978) · IEEE Vehicular Technology Conference · doi:10.1109/vtc.1978.1622522 · Cited by 111
Practical Design Considerations for Contactless Power Transfer Quadrature Pick-Ups
Raabe, S., & Covic, G. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165461 · Cited by 110
Self-citationDesign and optimisation of magnetic structures for lumped Inductive Power Transfer systems
Budhia, M., Covic, G. A., & Boys, J. T. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316197 · Cited by 108
Self-citationWireless Power Supply for Implantable Biomedical Device Based on Primary Input Voltage Regulation
Si, P., Hu, A. P., Hsu, J.-U. W., Chiang, M., Wang, Y., Malpas, S. C., & Budgett, D. (2007) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2007.4318406 · Cited by 101
Technology Improvement Pathways to Cost-effective Vehicle Electrification
Brooker, A., Thornton, M. J., & Rugh, J. P. (2010) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2010-01-0824 · Cited by 94
Sliding transformers for linear contactless power delivery
Barnard, J. M., Ferreira, J. A., & van Wyk, J. D. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.649938 · Cited by 91
A multi-resonant converter for non-contact charging with electromagnetic coupling
Laouamer, R., Brunello, M., Ferrieux, J.-P., Normand, O., & Buchheit, N. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1997.671998 · Cited by 90
Practical considerations for designing IPT system for EV battery charging
Huang, C.-Y., Boys, J. T., Covic, G. A., & Budhia, M. (2009) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2009.5289821 · Cited by 90
Self-citationMagnetically coupled systems for power transfer to electric vehicles
Elliott, G. A. J., Boys, J. T., & Green, A. W. (2002) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1995.404968 · Cited by 90
Self-citationHayes, J. G., Egan, M. G., Murphy, J., Schulz, S. E., & Hall, J. T. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.777198 · Cited by 88
High frequency resonant inverter for contactless energy transmission over large air gap
Mecke, R., & Rathge, C. (2004) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1355378 · Cited by 85
Design of LCL-T Resonant Converter Including the Effect of Transformer Winding Capacitance
Borage, M., Nagesh, K. V., Bhatia, M. S., et al. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2012417 · Cited by 77
Steady-State Flat-Pickup Loading Effects in Polyphase Inductive Power Transfer Systems
Kissin, M. L. G., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2060455 · Cited by 70
Self-citationInductively coupled power transfer for continuously powered electric vehicles
Pantic, Z., Bai, S., & Lukic, S. M. (2009) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2009.5289705 · Cited by 69
Contactless inductive power pickup system for Maglev applications
Song, B.-M., Kratz, R., & Gurol, S. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2002.1043746 · Cited by 67
An electric vehicle charging system with 'universal' inductive interface
Klontz, K. W., Esser, A., Bacon, R. R., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (2002) · Power Conversion Conference · doi:10.1109/pccon.1993.264219 · Cited by 61
An actively cooled 120 kW coaxial winding transformer for fast charging electric vehicles
Klontz, K. W., Divan, D. M., & Novotny, D. W. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475695 · Cited by 59
Ferrite core couplers for inductive chargers
Nakao, F., Matsuo, Y., Kitaoka, M., & Sakamoto, H. (2003) · Power Conversion Conference · doi:10.1109/pcc.2002.997631 · Cited by 55
Electric Vehicles – Personal transportation for the future
Covic, G. A., Boys, J. T., Budhia, M., & Huang, C.-Y. (2010) · World Electric Vehicle Journal · doi:10.3390/wevj4040693 · Cited by 55
Self-citationSeverns, R. P., Yeow, E., Woody, G., Hall, J. T., & Hayes, J. G. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1996.500418 · Cited by 54
Zell, C. E., & Bolger, J. (1982) · IEEE Vehicular Technology Conference · doi:10.1109/vtc.1982.1623054 · Cited by 48
A Primary-Side Control Strategy for Series-Parallel Loosely Coupled Inductive Power Transfer Systems
Chao, Y.-H., Shieh, J., Pan, C., Shen, W.-C., & Chen, M.-P. (2007) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2007.4318825 · Cited by 47
INDUCTIVE POWER TRANSFER TO AN ELECTRIC VEHICLE
Lashkari, K., Shladover, S. E., & Lechner, E. H. (1986) · Cited by 43
Contactless energy transmission to mobile loads by CLPS-test driving of an EV with starter batteries
Sato, F., Murakami, J., Suzuki, T., Matsuki, H., Kikuchi, S., Harakawa, K., Osada, H., & Seki, K. (1997) · IEEE Transactions on Magnetics · doi:10.1109/20.619710 · Cited by 41
Supply of electric vehicles via magnetically coupled air coils
Judek, S., & Karwowski, K. (2008) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2008.4635479 · Cited by 26
Urban electric transportation systems: the role of magnetic power transfer
Bolger, J. (2002) · Western Electronic Show and Convention (WESCON) · doi:10.1109/wescon.1994.403598 · Cited by 25
Haerri, V. V., & Martinovic, D. (2007) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2007.4460395 · Cited by 22
Comment 1 on Talvitie's paper: The games transportation academics play
BELL, M. K. (1997) · Transportation · doi:10.1023/a:1017959909121 · Cited by 20
MATSUDA, Y., Sakamoto, H., Shibuya, H., & Murata, S. (2006) · Journal of Applied Physics · doi:10.1063/1.2164408 · Cited by 16
A plug-in hybrid “Blue-Angel III” for vehicle to grid system with a wireless grid interface
Haerri, V. V., Madawala, U. K., Thrimawithana, D. J., Arnold, R., & Maksimovic, A. (2010) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2010.5729148 · Cited by 15
Controlling new die mechanisms for magnetic characteristics of super-large ferrite cores
Matsuo, Y., Kondoh, O. M., & Nakao, F. (2000) · IEEE Transactions on Magnetics · doi:10.1109/20.908843 · Cited by 13
Kamiya, Y., Nakamura, T., Sato, T., Kusaka, J., Daisho, Y., Takahashi, S., & Narusawa, K. (2007) · Cited by 13
Contactless power transmission with new secondary converter topology
Dockhorn, M., Kurschner, D., & Mecke, R. (2008) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2008.4635517 · Cited by 11
Cited by
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Self-citationCompensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Wireless Charging Technologies: Fundamentals, Standards, and Network Applications
Lu, X., Wang, P., Niyato, D., Kim, D. I., & Han, Z. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2499783 · Cited by 968
Metadata
- Authors
- Covic, G. A., & Boys, J. T.
- Venue
- Proceedings of the IEEE
- Published
- 2013-06
- Volume
- 101
- Issue
- 6
- Pages
- 1276-1289
- ISSN
- 0018-9219 (ISSN-L)
- 1558-2256
- OpenAlex
- W3150014388
- Cited by
- 1,223
- References
- 84
- FWCI
- 44.33
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.