The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Overview on Additive Manufacturing Technologies
Abstract
This paper provides an overview on the main additive manufacturing/3D printing technologies suitable for many satellite applications and, in particular, radio-frequency components. In fact, nowadays they have become capable of producing complex net-shaped or nearly net-shaped parts in materials that can be directly used as functional parts, including polymers, metals, ceramics, and composites. These technologies represent the solution for low-volume, high-value, and highly complex parts and products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Chlebus, E., Gruber, K., Kuźnicka, B., Kurzac, J., & Kurzynowski, T. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.035 · Cited by 787
Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells
Wang, H. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00023-5 · Cited by 776
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Critical parameters influencing the quality of prototypes in fused deposition modelling
Anitha, R., Arunachalam, S., & Radhakrishnan, P. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00980-3 · Cited by 733
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
(2013) · Medical Entomology and Zoology · Cited by 690
Additive layered manufacturing: sectors of industrial application shown through case studies
Petrovic, V., Vicente Haro Gonzalez, J., Jordá Ferrando, O., Delgado Gordillo, J., Ramón Blasco Puchades, J., & Portolés Griñan, L. (2011) · International Journal of Production Research · doi:10.1080/00207540903479786 · Cited by 676
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Raghavan, N., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., Carlson, N., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.063 · Cited by 573
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Takaichi, A., Suyalatu, Nakamoto, T., Joko, N., Nomura, N., Tsutsumi, Y., Migita, S., Doi, H., Kurosu, S., Chiba, A., et al. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.01.021 · Cited by 489
Biamino, S., Penna, A., Ackelid, U., Sabbadini, S., Tassa, O., Fino, P., Pavese, M., Gennaro, P., & Badini, C. (2011) · Intermetallics · doi:10.1016/j.intermet.2010.11.017 · Cited by 486
Self-citationCalignano, F. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.07.043 · Cited by 486
Self-citationTang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y., & Wang, J. (2015) · JOM · doi:10.1007/s11837-015-1300-4 · Cited by 483
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4688-9 · Cited by 469
Self-citationMesoscopic simulation of selective beam melting processes
Körner, C., Attar, E., & Heinl, P. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.016 · Cited by 450
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
Galantucci, L. M., Lavecchia, F., & Percoco, G. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.03.071 · Cited by 404
FDM 3D Printing Technology in Manufacturing Composite Elements
Dudek, P. (2013) · Archives of Metallurgy and Materials · doi:10.2478/amm-2013-0186 · Cited by 404
Joe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Pattanayak, D. K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., Nishida, N., Nakamura, T., & Kokubo, T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.034 · Cited by 384
Ceramic suspensions suitable for stereolithography
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 351
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Surface Morphology in Selective Laser Melting of Metal Powders
Yadroitsev, I., & Smurov, I. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.034 · Cited by 349
Hinojos, A., Mireles, J., Reichardt, A., Frigola, P., Hosemann, P., Murr, L. E., & Wicker, R. B. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.041 · Cited by 337
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F., & Wicker, R. B. (2012) · International Journal of Biomaterials · doi:10.1155/2012/245727 · Cited by 306
Part and material properties in selective laser melting of metals
Kruth, J., Badrossamay, M., Yasa, E., Deckers, J. P., Thijs, L., & Humbeeck, J. V. (2010) · Lirias · Cited by 303
Modelling and simulation of electron beam melting
Zäh, M. F., & Lutzmann, S. (2010) · Production Engineering · doi:10.1007/s11740-009-0197-6 · Cited by 263
Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
Denlinger, E. R., Heigel, J. C., & Michaleris, P. (2015) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405414539494 · Cited by 263
Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., & Misra, R. D. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.01.034 · Cited by 262
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Karlsson, J., Snis, A., Engqvist, H., & Lausmaa, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.010 · Cited by 254
Siddique, S., Imran, M., Wycisk, E., et al. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.023 · Cited by 238
Ink‐Jet Printing of Wax‐Based Alumina Suspensions
Seerden, K. A. M., Reis, N., Evans, J. R. G., Grant, P. S., Halloran, J. W., & Derby, B. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01045.x · Cited by 237
Development of rapid tooling using fused deposition modeling: a review
Boparai, K. S., Singh, R., & Singh, H. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2014-0048 · Cited by 229
Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
Ramsperger, M., Singer, R. F., & Körner, C. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3300-y · Cited by 226
New developments in fused deposition modeling of ceramics
Bellini, A., Shor, L., & Guceri, S. I. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612901 · Cited by 216
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Galantucci, L. M., Lavecchia, F., & Percoco, G. (2010) · CIRP Annals · doi:10.1016/j.cirp.2010.03.074 · Cited by 211
Medical design: Direct metal laser sintering of Ti–6Al–4V
Bertol, L. S., Júnior, W. K., Silva, F. P. D., & Aumund-Kopp, C. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.02.050 · Cited by 193
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Garg, A., Bhattacharya, A., & Batish, A. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1070425 · Cited by 192
Helmer, H. E., Körner, C., & Singer, R. F. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.192 · Cited by 189
Miranda, G., Faria, S., Bartolomeu, F., Pinto, E., Madeira, S., Mateus, A., Carreira, P., Alves, N., Silva, F. S., & Carvalho, O. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.028 · Cited by 187
Tailoring the grain structure of IN718 during selective electron beam melting
Körner, C., Helmer, H., Bauereiß, A., & Singer, R. F. (2014) · MATEC Web of Conferences · doi:10.1051/matecconf/20141408001 · Cited by 174
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Tang, H., Yang, G. Y., Jia, W., He, W., Lu, S., & Qian, M. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.03.079 · Cited by 164
Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
Lodes, M. A., Guschlbauer, R., & Körner, C. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.12.105 · Cited by 161
Dehoff, R., Kirka, M. M., List, F. A., III, et al. (2014) · Materials Science and Technology · doi:10.1179/1743284714y.0000000697 · Cited by 143
Barucca, G., Santecchia, E., Majni, G., Girardin, E., Bassoli, E., Denti, L., Gatto, A., Iuliano, L., Moskalewicz, T., & Mengucci, P. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.12.009 · Cited by 141
Self-citationMicrostructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
Murr, L. E., Martinez, E., Pan, X., et al. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.002 · Cited by 140
Sandström, C. G. (2015) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.09.006 · Cited by 139
Alrbaey, K., Wimpenny, D. I., Tosi, R., Manning, W. J., & Moroz, A. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0993-9 · Cited by 136
Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery
Jardini, A. L., Larosa, M. A., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Kharmandayan, P., Calderoni, D. R., & Filho, R. M. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.900857 · Cited by 131
Application of dimensional analysis to selective laser melting
Elsen, M. V., Al‐Bender, F., & Kruth, J. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810841526 · Cited by 130
Options for additive rapid prototyping methods (3D printing) in MEMS technology
Lifton, V. A., Lifton, G., & Simon, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0038 · Cited by 120
Additive Manufacturing in Aerospace; Examples and Research Outlook
Lyons, B. (2014) · The Bridge · Cited by 96
Algardh, J. K., Horn, T., West, H., Aman, R., Snis, A., Engqvist, H., Lausmaa, J., & Harrysson, O. L. A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.009 · Cited by 96
Ilardo, R., & Williams, C. B. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011034834 · Cited by 92
Powder deposition in selective metal powder sintering
der Schueren, B. V., & Kruth, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510094241 · Cited by 86
Mazzoli, A., Germani, M., & Raffaeli, R. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.11.013 · Cited by 86
Parameters in selective laser melting for processing metallic powders
Kurzynowski, T., Chlebus, E., Kuźnicka, B., et al. (2012) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.907292 · Cited by 86
Terrazas, C. A., Mireles, J., Gaytan, S. M., Morton, P. A., Hinojos, A., Frigola, P., & Wicker, R. B. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7767-x · Cited by 61
Vastola, G., Zhang, G., Pei, Q., et al. (2016) · JOM · doi:10.1007/s11837-016-1890-5 · Cited by 61
Impact of additive manufacturing on engineering education – evidence from Italy
Minetola, P., Iuliano, L., Bassoli, E., & Gatto, A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2014-0123 · Cited by 60
Self-citationRiedlbauer, D., Steinmann, P., & Mergheim, J. (2014) · Computational Mechanics · doi:10.1007/s00466-014-1026-0 · Cited by 48
Numerical Thermal Analysis in Electron Beam Additive Manufacturing with Preheating Effects
Shen, N., & Chou, K. (2012) · doi:10.26153/tsw/15388 · Cited by 48
Scheduling and process planning for multiple material stereolithography
Kim, H.-C., Choi, J. W., & Wicker, R. B. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011049243 · Cited by 44
Experimental Temperature Analysis of Powder-Based Electron Beam Additive Manufacturing
Price, S., Lydon, J., Cooper, K., et al. (2013) · doi:10.26153/tsw/15422 · Cited by 43
Fabrication and perfusion culture of anatomically shaped artificial bone using stereolithography
Du, D., Asaoka, T., Ushida, T., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/4/045002 · Cited by 36
Price, S., Cooper, K. G., & Chou, K. (2014) · International Journal of Rapid Manufacturing · doi:10.1504/ijrapidm.2014.062010 · Cited by 35
Vastola, G., Zhang, G., Pei, Q., et al. (2016) · JOM · doi:10.1007/s11837-016-1990-2 · Cited by 33
Gandhi, P., & Deshmukh, S. P. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/1/015035 · Cited by 24
Stereolithographic models of biopolymers
Yourtee, D. M., Emery, J. D., Smith, R. E., et al. (2000) · Journal of Molecular Graphics and Modelling · doi:10.1016/s1093-3263(00)00029-2 · Cited by 11
Bertsch, A., & Renaud, P. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-35321-2.00002-9 · Cited by 10
Enabling homeland security missions with in-space 3D printing
McGuire, T., Hirsch, M., Parsons, M. J., Leake, S., & Straub, J. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2223506 · Cited by 7
Enablement of scientific remote sensing missions with in-space 3D printing
Hirsch, M., McGuire, T., Parsons, M. J., Leake, S., & Straub, J. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2223467 · Cited by 7
Cited by
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Advances in Polyimide‐Based Materials for Space Applications
Gouzman, I., Grossman, E., Verker, R., Atar, N., Bolker, A., & Eliaz, N. (2019) · Advanced Materials · doi:10.1002/adma.201807738 · Cited by 732
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Metadata
- Authors
- Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P.
- Venue
- Proceedings of the IEEE
- Published
- 2017-04
- Volume
- 105
- Issue
- 4
- Pages
- 593-612
- ISSN
- 0018-9219 (ISSN-L)
- 1558-2256
- OpenAlex
- W2567177733
- Cited by
- 640
- References
- 96
- FWCI
- 31.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.