Location Fingerprinting With Bluetooth Low Energy Beacons
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The complexity of indoor radio propagation has resulted in location-awareness being derived from empirical fingerprinting techniques, where positioning is performed via a previously-constructed radio map, usually of WiFi signals. The recent introduction of the Bluetooth Low Energy (BLE) radio protocol provides new opportunities for indoor location. It supports portable battery-powered beacons that can be easily distributed at low cost, giving it distinct advantages over WiFi. However, its differing use of the radio band brings new challenges too. In this work, we provide a detailed study of BLE fingerprinting using 19 beacons distributed around a ~600 m2testbed to position a consumer device. We demonstrate the high susceptibility of BLE to fast fading, show how to mitigate this, and quantify the true power cost of continuous BLE scanning. We further investigate the choice of key parameters in a BLE positioning system, including beacon density, transmit power, and transmit frequency. We also provide quantitative comparison with WiFi fingerprinting. Our results show advantages to the use of BLE beacons for positioning. For one-shot (push-to-fix) positioning we achieve2), compared to2) and <; 8.5 m for an established WiFi network in the same area.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Because the Wi-Fi APs and BLE beacons share the same frequency range (2.4 GHz) there may be interference problems [15], although: (1) interference problems usually occur when the number of access points is very large, something that did not happen in our case; (2) possible interference problems could be overcome by avoiding certain channels and taking into account the fact that Bluetooth”
From Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy (2017) · cites this paper as [15]
In the citing paper
“this is simply the consequence of the fact that BLE technology transmits advertisements on these channels to mitigate interference with other devices [15].”
From Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy (2017) · cites this paper as [15]
Citations
Cites
Survey of Wireless Indoor Positioning Techniques and Systems
Liu, H., Darabi, H., Banerjee, P., & Liu, J. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.905750 · Cited by 4,098 · cited 1×
“Indoor positioning is a mature research field, with many proposed technologies and techniques—comprehensive overviews can be found in [19], [18], [2].”
BackgroundThe Horus WLAN location determination system
Youssef, M., & Agrawala, A. (2005) · Proceedings of the 3rd international conference on Mobile systems, applications, and services · doi:10.1145/1067170.1067193 · Cited by 1,653 · cited 1×
“Here the focus is on radio positioning, specifically using the empirical fingerprinting techniques [3], [15], [17], [22] that avoid the need to model the complex radio propagation environment indoors by patternmatching to a previously surveyed map of radio signal strengths.”
BackgroundA Survey of Indoor Inertial Positioning Systems for Pedestrians
Harle, R. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.121912.00075 · Cited by 814 · cited 1×
“fingerprints with other sources to form hybrid systems, many of which are based on the idea of Simultaneous Localization and Mapping (SLAM) [10], [16] being applied to pedestrian dead reckoning [13].”
BackgroundSelf-citationWiFi-SLAM Using G aussian Process Latent Variable Models
Ferris, B., Fox, D., & Lawrence, N. D. (2007) · International Joint Conference on Artificial Intelligence · Cited by 610
Network Time Protocol Version 4: Protocol and Algorithms Specification
Mills, D., Burbank, J., & Kasch, W. (2010) · doi:10.17487/rfc5905 · Cited by 577
A comparative survey of WLAN location fingerprinting methods
Honkavirta, V., Perala, T., Ali-Loytty, S., & Piche, R. (2009) · 2009 6th Workshop on Positioning, Navigation and Communication · doi:10.1109/wpnc.2009.4907834 · Cited by 522
Enhancements to the RADAR User Location and Tracking System
Bahl, V., & Padmanabhan, V. (2000) · Cited by 507
Implementing a sentient computing system
Addlesee, M., Curwen, R., Hodges, S., Newman, J., Steggles, P., Ward, A., & Hopper, A. (2001) · Computer · doi:10.1109/2.940013 · Cited by 490 · cited 1×
“Ground Truth Location: The Active Bat system [1] was available throughout the testbed and was used to provide ground truth position.”
MethodA Survey of Indoor Positioning and Object Locating Systems
Koyuncu, H., & Yang, S. H. (2010) · Cited by 251
COMPASS: A probabilistic indoor positioning system based on 802.11 and digital compasses
King, T., Kopf, S., Haenselmann, T., Lubberger, C., & Effelsberg, W. (2006) · Proceedings of the 1st international workshop on Wireless network testbeds, experimental evaluation & characterization · doi:10.1145/1160987.1160995 · Cited by 223
Research works printed but not linked: 2
- ferris, 0, WiFi-SLAM using Gaussian process latent variable models, Proc 20th IJCAI, 2480
- 2010, Bluetooth Specification Version 4 0
Cited by
Items 301–400 of 917
Bluetooth Low Energy Based Indoor Positioning on iOS Platform
Duong, N. S., Trinh, V. T. A., & Dinh, T. T. M. (2018) · IEEE International Symposium on Embedded Multicore/Many-core Systems-on-Chip (MCSoC) · doi:10.1109/mcsoc2018.2018.00021 · Cited by 15
“Faragher and Harle’ study [12] investigated a number of key factors for accurate positioning with BLE and fingerprinting.”
BackgroundImage-Based Camera Localization Algorithm for Smartphone Cameras Based on Reference Objects
Jabborov, F., & Cho, J. (2020) · Wireless Personal Communications · doi:10.1007/s11277-020-07487-9 · Cited by 16
The Smart Fall Detection Mechanism for Healthcare Under Free-Living Conditions
Horng, G.-J., & Chen, K. (2021) · Wireless Personal Communications · doi:10.1007/s11277-020-08040-4 · Cited by 18
WLAN-BLE Based Indoor Positioning System using Machine Learning Cloud Services
Teran, M., Carrillo, H., & Parra, C. (2018) · 2018 IEEE 2nd Colombian Conference on Robotics and Automation (CCRA) · doi:10.1109/ccra.2018.8588127 · Cited by 14
Particle filter for context sensitive indoor pedestrian navigation
Peltola, P., Hill, C. J., & Moore, T. (2016) · International Conference on Localization and GNSS · doi:10.1109/icl-gnss.2016.7533865 · Cited by 14
“Using only one channel has the benefit of smaller RSS value deviation [3].”
BackgroundMethodHaus, M., Ding, A. Y., & Ott, J. (2017) · doi:10.1145/3127502.3127510 · Cited by 14
“[7] found that BLE positioning systems provide a higher accuracy compared with Wi-Fi ngerprinting.”
MethodUWB-Based Single-Anchor Indoor Localization Using Reflected Multipath Components
Mohammadmoradi, H., Heydariaan, M., Gnawali, O. D., & Kim, K. (2019) · 2012 International Conference on Computing, Networking and Communications (ICNC) · doi:10.1109/iccnc.2019.8685609 · Cited by 14
“Feasibility of using information from wireless links (Bluetooth and WiFi) to generate fingerprints has been studied before [9], [10].”
BackgroundTowards a Smart Campus for Qassim University: An Investigation of Indoor Navigation System
Hadwan, M., Khan, R. U., & Abuzanouneh, K. I. M. (2020) · Advances in Science Technology and Engineering Systems Journal · doi:10.25046/aj050699 · Cited by 14
“For more information about the smart campus, services refer to [3, 4, 14-15].”
BackgroundCrowdsourcing-Based Indoor Localization With Knowledge-Aided Fingerprint Transfer
Xiang, C., Zhang, S., Xu, S., & Mao, G. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3142261 · Cited by 16
“…(GNSS) with the inertial navigation system (INS) [4] provides satisfactory accuracy, indoor localization solutions are quite diversified, such as those based on the low-cost Bluetooth Low Energy (BLE) [5], the increasingly popular 3GPP LTE/5G [6], and the widely deployed WiFi technologies [7]–[11].”
BackgroundHybrid Learning for Mobile Ad-Hoc Distancing/Positioning Using Bluetooth Low Energy
Ho, Y. H., Liu, Y., Zhang, C., Sartayeva, Y., & Chan, H. C. B. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3247299 · Cited by 14
Unpacking People's Understandings of Bluetooth Beacon Systems - A Location-Based IoT Technology
Yao, Y., Huang, Y., & Wang, Y. (2019) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2019.198 · Cited by 17
“This implies that our participants either ignored or did not know that Bluetooth could also be used for location tracking [9, 10].”
BackgroundCultural heritage visits supported on visitors’ preferences and mobile devices
Cardoso, P. J. S., Rodrigues, J. M. F., Pereira, J. M., Nogin, S., Lessa, J., Ramos, C. M. Q., Bajireanu, R., Gomes, M., & Bica, P. (2019) · Universal Access in the Information Society · doi:10.1007/s10209-019-00657-y · Cited by 17
Chen, L., & Liu, J.-X. (2021) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2021.3103749 · Cited by 14
Low-Cost Indoor Localization System Combining Multilateration and Kalman Filter
Sestrem, L., Rayel, O. K., & Leitão, P. (2021) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie45552.2021.9576353 · Cited by 14
“Among the wireless technologies, BLE is a suitable and attractive approach for positioning applications due to its beaconing mechanism, low power consumption and affordability [10].”
BackgroundMethodInfluentialBluetooth Low Energy Microlocation Asset Tracking (BLEMAT) in a Context-Aware Fog Computing System
Pešić, S., Tošić, M., Iković, O., Radovanović, M., Ivanović, M. D., & Bošković, D. (2018) · International Conference on Web Intelligence, Mining and Semantics · doi:10.1145/3227609.3227652 · Cited by 15
“…systems traditionally requires multiple fixed Beacons stationing at the observed closed space, where the device being tracked is the midpoint of the system - it is responsible for Beacon scanning, carrying out calculations and in the end positioning itself on the space map [7, 8, 15, 26, 31].”
BackgroundA low-cost BLE based sensor platform for efficient Received Signal Strength monitoring
Maus, G. W., Kuxdorf-Alkirata, N., Brückmann, D., & Gemci, M. (2019) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas.2019.8884973 · Cited by 14
“However, existing BLE applications, like e. g. described in [1] or [2], that sniff BLE advertising channels, suffer from low sampling rates and poorly configurable network topologies.”
Alhomayani, F. M., & Mahoor, M. H. (2021) · Scientific Data · doi:10.1038/s41597-021-00832-y · Cited by 14
A Novel Multimodal Feature-Level Fusion Scheme for High-Accurate Indoor Localization
Tang, S., Huang, K., & Zhang, S. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3397793 · Cited by 16
“For example, meter-level indoor localization accuracy has been reported in [2] and [3] using wireless fidelity (WiFi) or Bluetooth low energy (BLE) signals.”
BackgroundShi, W., Qi, X., Li, J., Yan, S., Chen, L., Yang, Y., & Feng, X. (2017) · EURASIP Journal on Wireless Communications and Networking · doi:10.1186/s13638-017-0859-6 · Cited by 13
HMM-Based Indoor Localization Using Smart Watches' BLE Signals
Han, D., Rho, H., & Lim, S. (2018) · International Conference on Future Internet of Things and Cloud (FiCloud) · doi:10.1109/ficloud.2018.00050 · Cited by 13
“When the measured data is used to estimate the actual position of the user, the position with the least error in the sensor data map is determined, and the sensor data map recognized at the current position is estimated as the current position [5–7].”
MethodIndoor localization using radio beacon technology
Obreja, S. G., Aboul-Hassna, T., Mocanu, F. D., & Vulpe, A. (2018) · International Symposium on Electronics and Telecommunications (ISETC) · doi:10.1109/isetc.2018.8583888 · Cited by 13
“Also, fingerprinting approach was used in several papers, using WiFi or BLE technologies [15]-[17].”
MethodCerón, J. D., Kluge, F., Küderle, A., Eskofier, B. M., & López, D. M. (2020) · Sensors · doi:10.3390/s20174742 · Cited by 13
“Furthermore MHz bandwidth channels in the 2.4 GHz band, causing the more so than WIFI signals [23].”
BackgroundInfluentialTan, S., Tax, D. M. J., & Hung, H. (2021) · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies · doi:10.1145/3448122 · Cited by 13
Uzun, A., Ghani, F. A., Najafabadi, A. M. A., Yenigün, H., & Tekin, İ. (2021) · Sensors · doi:10.3390/s21134338 · Cited by 13
Bellrock: Anonymous Proximity Beacons From Personal Devices
Zidek, A., Tailor, S. A., & Harle, R. K. (2018) · IEEE International Conference on Pervasive Computing and Communications · doi:10.1109/percom.2018.8444603 · Cited by 13
“We also intend to explore the use of more advanced positioning methods such as radio fingerprinting [30].”
Self-citationSustainable Consumerism via Context-Aware Shopping
Klinglmayr, J., Bergmair, B., Klaffenböck, M. A., Hörmann, L. B., & Pournaras, E. (2017) · International Journal of Distributed Systems and Technologies · doi:10.4018/ijdst.2017100104 · Cited by 13
“, the earth’s magnetic field as described in [Haverinen and Kemppainen, 2009] and [Haverinen, 2016], an artificial magnetic field, or the RSSI values of WLAN/BLE beacons as performed in [Faragher and Harle, 2015].”
MethodA real-subject evaluation trial for location-aware smart buildings
Inaya, M., Meli, M., Sikeridis, D., & Devetsikiotis, M. (2017) · IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS) · doi:10.1109/infcomw.2017.8116393 · Cited by 13
“a smartphone) that acts as a scanner receiving signals from fixed transmitters [7], [8].”
BackgroundWen, S., Cai, X., Guan, W., Jiang, J., Chen, B., & Huang, M. (2018) · Optical Engineering · doi:10.1117/1.oe.57.10.106102 · Cited by 13
Ai, H., Tang, K., Huang, W., Zhang, S., & Li, T. (2019) · Computing · doi:10.1007/s00607-019-00724-5 · Cited by 13
A Systematic Literature Review of Indoor Position System Accuracy and Implementation
Soewito, B., Hassyr, F. A., & Arisandi, T. G. G. (2018) · International Conference on Applied Science and Technology (iCAST) · doi:10.1109/icast1.2018.8751623 · Cited by 13
“5% use BLE as a device and discuss accuracy, which are [9], [10], [11], [13], and [20].”
An End-to-End BLE Indoor Location Estimation Method Using LSTM
Urano, K., Hiroi, K., Yonezawa, T., & Kawaguchi, N. (2019) · International Conference on Mobile Computing and Ubiquitous Network (ICMU) · doi:10.23919/icmu48249.2019.9006638 · Cited by 13
“Faragher et al. [18] adopted fingerprint with fixed BLE tag and mobile scanner style location estimation.”
BackgroundBluetooth Low Energy Technology Applied to Indoor Positioning Systems: An Overview
de Blasio, G., Quesada-Arencibia, A., García, C. R., & Rodríguez-Rodríguez, J. C. (2020) · Lecture notes in computer science · doi:10.1007/978-3-030-45093-9_11 · Cited by 13
Fusing of a Continuous Output PDR Algorithm With an Ultrasonic Positioning System
Thio, V., Aparicio, J., Ánonsen, K. B., Bekkeng, J. K., & Booij, W. E. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3134468 · Cited by 13
Experimental Evaluation of Precision of a Proximity-based Indoor Positioning System
Kouyoumdjieva, S. T., & Karlsson, G. (2019) · Annual Conference on Wireless On-demand Network Systems and Services (WONS) · doi:10.23919/wons.2019.8795488 · Cited by 15
“One of the first works on BLE beacon accuracy for indoor positioning is presented in [8].”
BackgroundZhu, N., Ortiz, M., & Renaudin, V. (2019) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2019.8911741 · Cited by 13
“Fortunately, the gap of indoor positioning is being bridged by numbers of techniques, from the classic Inertial Measurement Unit (IMU) to other technologies such as WIFI positioning [2], Ultra-wideband (UWB) positioning [3], [4], bluetooth positioning [5], laser or camera-based positioning [6], magnetic anomaly matchi…”
BackgroundHigher Education Check-Ins: Exploring the User Experience of Hybrid Location Sensing
Huang, Y., Sang, Y., Wu, Q., & Yao, Y. (2019) · Proceedings of the ACM on Human-Computer Interaction · doi:10.1145/3359168 · Cited by 12
“For example, the power consumption of smart devices is lower for BLE beacons than for WiFi [34]; Bluetooth is shown to be about 30% more energy efficient than WiFi [84] when transmitting occupancy data.”
BackgroundPapale, L., Catini, A., Capuano, R., Allegra, V., Martinelli, E., Palmacci, M., Tranfo, G., & Natale, C. D. (2023) · Sensors · doi:10.3390/s23052457 · Cited by 12
“It is known that with these channels, the localization accuracy improves [22,23].”
BackgroundRSS Channel-Based Integration for BLE Fingerprinting Positioning
Aranda, F. J., Parralejo, F., Aguilera, T., Álvarez, F. J., & Torres-Sospedra, J. (2023) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin57070.2023.10332223 · Cited by 12
“Faragher and Harle [7] reported that the RSS measurement distribution for each channel individually presented lower variability when compared with the aggregate distribution, in which channel frequency information was not considered.”
BackgroundA GNSS UWB tight coupling and IMU ESKF algorithm for indoor and outdoor mixed scenario
Luo, J., Yin, Z., & Gui, L. (2024) · Cluster Computing · doi:10.1007/s10586-023-04208-2 · Cited by 12
“Building-dependent systems mainly include positioning technologies based on WiFi [6], Bluetooth [7], ultrasound [8] and Ultra-wideband (UWB) [9].”
Weighted Least-Squares Bluetooth Localization Method Based on Data Preprocessing
Shi, L., Zeng, R., Jing, F., & Shi, Y. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3445134 · Cited by 12
“Using the path-loss model of wireless signals [8], a trilateral positioning method [9], a multilateral positioning method, and a fingerprint positioning technology [10], [11] based on Bluetooth RSSI information are derived based on the principle.”
PEOPLEx: PEdestrian Opportunistic Positioning LEveraging IMU, UWB, BLE and WiFi
Lajoie, P., Baghi, B. H., Herath, S., Hogan, F. R., Liu, X., & Dudek, G. (2024) · International Conference on Communications · doi:10.1109/icc51166.2024.10622566 · Cited by 12
“However, they can be affected by signal instability and require a dense beacon deployment for optimal performance [7].”
BackgroundA Location Tracking System using BLE Beacon Exploiting a Double-Gaussian Filter
Lee, J., Kim, J., Lee, S., & Ko, Y. (2017) · KSII Transactions on Internet and Information Systems · doi:10.3837/tiis.2017.02.031 · Cited by 12
A Comparative Study of BLE-based Fingerprint Localization for Vehicular Application
Cao, Y., Lu, X., Zhao, Z., Ji, X., Yang, J., & Pang, X. (2018) · Ubiquitous Positioning, Indoor Navigation, and Location Based Service · doi:10.1109/upinlbs.2018.8559781 · Cited by 13
Energy-Efficient Overlay Protocol for BLE Beacon-Based Mesh Network
Ng, P. C., She, J. P. M., & Spachos, P. (2021) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2021.3133538 · Cited by 12
“For example, [18] constructs the location fingerprints by measuring the RSS contributed by a network of 19 beacons; whereas [19] provides the theoretical bound regarding the number of beacons required to achieve an unambiguous user positioning.”
BackgroundEmergency Evacuation Information System Using IoT
Ahmad, A., Singh, V., Joshi, K. K., Sidhu, K. S., Singh, S., & Kaushik, V. D. (2024) · Lecture notes in networks and systems · doi:10.1007/978-981-97-3810-6_28 · Cited by 12
Towards indoor localisation analytics for modelling flows of movements
Marini, G. (2019) · ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp) · doi:10.1145/3341162.3349306 · Cited by 12
“Tests[7]showclearadvantagesinusingBLE technologywithanerror 2.6min95%ofmeasurementsfor adenseBLEnetworkanduptoanerrorof<4.8mforamore sparsedeployment,animprovementWiFibasedsystems.”
FastGraph Enhanced: High Accuracy Automatic Indoor Navigation and Mapping
Pendão, C., & Moreira, A. J. C. (2019) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2019.2955653 · Cited by 13
“This was also verified in [53], where the authors compare the scan times of Wi-Fi and Bluetooth.”
BackgroundGendy, M. E. G., Tham, P., Harrison, F., & Yuce, M. R. (2023) · Sensors · doi:10.3390/s23031397 · Cited by 13
“5 for a standard office environment [34]; do = 1 m, and RSSIdo is the average measured received RSSI at 1 m that was found to be −57 dBm [59].”
BackgroundHuang, S.-W., Chiou, S.-Y., Chen, R.-C., & Sub-r-pa, C. (2024) · Sensors · doi:10.3390/s24124020 · Cited by 11
“Hospitals are increasingly adopting modern technologies such as hospital management systems, real-time location systems [22,23] (e.g., our proposed Beacon), smartphones, and integrated communication platforms to address the limitations of telephone-based communication.”
BackgroundDemonstration of a robot controlling and positioning system based on visible light
Hu, J., Gong, C., & Xu, Z. (2016) · International Conference on Wireless Communications and Signal Processing (WCSP) · doi:10.1109/wcsp.2016.7752576 · Cited by 11
“To mitigate this issue, various indoor positioning system designs have been proposed since the past decade [1], [2], [3].”
BackgroundPredicting Indoor Position Using Bluetooth Low Energy And Machine Learning
Alexander, I., & Kusuma, G. P. (2019) · International journal of scientific and technology research · Cited by 11
Yuan, Z., Zha, X., & Zhang, X. (2020) · Sensors · doi:10.3390/s20185416 · Cited by 11
“Today, there have been many studies on MF fingerprint [14,15] positioning and localization [16,17], Wi-Fi fingerprint positioning and localization [18,19], as well as Bluetooth fingerprint positioning and localization [20,21], but studies on”
BackgroundLyu, Z., Chan, T. T.-L., Hung, T. Y.-T., Ji, H., Leung, G. C. M., & Lun, D. P.-K. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202300292 · Cited by 12
Rethinking ranging of unmodified BLE peripherals in smart city infrastructure
Islam, B., Uddin, M., Mukherjee, S., & Nirjon, S. (2018) · ACM Multimedia Systems Conference (MMSys) · doi:10.1145/3204949.3204950 · Cited by 11
“Several studies has been performed to compare the performance of BLE and WiFi based fingerprinting [24, 29, 38].”
BackgroundLow-Cost Indoor Human Tracking by Utilizing Fluctuation of Received Radio Signal Strength
Lee, H.-C., & Lin, T.-T. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3001055 · Cited by 11
Improving Proximity Detection of Mesh Beacons at the Edge for Indoor and Outdoor Navigation
Fazio, M. C., Celesti, A., & Villari, M. (2020) · IEEE International Workshop on Computer Aided Modeling and Design of Communication Links and Networks (CAMAD) · doi:10.1109/camad50429.2020.9209253 · Cited by 11
“Faragher and Harle [5] implemented this method using 19 Bluetooth beacons over 600 mq being able to achieve localization accuracy of less than 2.6 m error in 95% of the case.”
MethodInfluentialExperimental Evaluation of the Forkbeard Ultrasonic Indoor Positioning System
Thio, V., Aparicio, J., Ánonsen, K. B., & Bekkeng, J. K. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3136261 · Cited by 11
Human Motion Likelihood Representation Map-Aided PDR Particle Filter
Ghaoui, M. A., Vincke, B., & Reynaud, R. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3222639 · Cited by 11
“There are numerous techniques that deploy an infrastructure using various technologies such as WiFi [3], Bluetooth [4], UWB [3], RFID [5] or vision-based [6].”
BackgroundImproving BLE-Based Passive Human Sensing with Deep Learning
Iannizzotto, G., Bello, L. L., & Nucita, A. (2023) · Sensors · doi:10.3390/s23052581 · Cited by 11
“As RSSI has different mean values for each channel [34], it is not possible to differentiate the RSSI samples based on the channel.”
Indoor localization for Bluetooth low energy using wavelet and smoothing filter
Hou, X., Arslan, T., & Gu, J. (2017) · International Conference on Localization and GNSS · doi:10.1109/icl-gnss.2017.8376247 · Cited by 11
“Thus, many solutions and algorithms for indoor localization have been investigated and proposed during the last decade [3-5].”
BackgroundRSS ranging based indoor localization in ultra low power wireless network
Kwon, Y., & Kwon, K. (2019) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2019.03.015 · Cited by 12
Determination of the Walking Direction of a Pedestrian from Acceleration Data
Leonardo, R., Rodrigues, G., Barandas, M., Alves, P., Santos, R., & Gamboa, H. F. S. (2019) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2019.8911801 · Cited by 11
“While there are systems that report sub-metric precision, these rely on specialized infrastructure [3]–[5], elevating setup and maintenance costs and thus limiting their deployability.”
BackgroundAdaptive Indoor Localization System for Large-Scale Area
Vongsuteera, T., & Rojviboonchai, K. (2021) · IEEE Access · doi:10.1109/access.2021.3049593 · Cited by 11
Cellular Base Station Assisted Indoor Positioning
Li, X. (2018) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2018.2856319 · Cited by 12
Activity choice modeling for pedestrian facilities
Danalet, A. (2015) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-6806 · Cited by 24
“Fingerprinting for a large area is impractical and calibration-free methods are preferred (“large” being more than 600 m2, since Faragher and Harle (2015) performed fingerprinting for such a surface).”
MethodSakphrom, S., Suwannarat, K., Haiges, R., & Funsian, K. (2021) · Informatics · doi:10.3390/informatics8040065 · Cited by 10
“…path-loss model, the propagation model that reveals the corresponding relationship between distance and RSSI can be expressed as Equation (1) [16–18]. where RSSI is a dependent variable of the received signal strength indication, D is the estimated distance between the transmitter and the…”
BackgroundMethodLi, H., Zhang, C., Fan, X., Tian, L., Li, T., Pang, Y., & Yanqiang, Y. A. N. G. (2023) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2023.12.022 · Cited by 10
Supervised learning algorithms for indoor localization fingerprinting using BLE4.0 beacons
Lovón-Melgarejo, J., Castillo‐Cara, M., Orozco–Barbosa, L., & García-Varea, I. (2017) · IEEE Latin American Conference on Computational Intelligence (LA-CCI) · doi:10.1109/la-cci.2017.8285716 · Cited by 10
“Beacon uses 40 channels, each 2 MHz wide.”
BackgroundLocalization Reliability Improvement Using Deep Gaussian Process Regression Model
Teng, F., Tao, W., & Own, C. (2018) · Sensors · doi:10.3390/s18124164 · Cited by 10
BluePIL: a Bluetooth-based PassIve Localization Method
Rodrigues, B., Halter, C., Franco, M. F., Scheid, E. J., Killer, C., & Stiller, B. (2021) · Alexandria (UniSG) (University of St.Gallen) · Cited by 16
Vehicle Tracking System in Underground Parking Lots Using Smartphone
Shin, B., Kim, T., Kyung, H., Yu, C., Shin, D., & Lee, T. (2024) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2024.3435523 · Cited by 10
“RSS can be measured in most RF signals, such as WiFi [13], [14], Bluetooth low energy (BLE) [15], and long-term evolution (LTE) [16].”
BackgroundEfficient exploration of indoor localization using genetic algorithm and signal propagation model
Assayag, Y., Souto, E., Barreto, R., Carvalho, M., Pazzi, R. W., & Fernandes, H. (2024) · Computing · doi:10.1007/s00607-024-01391-x · Cited by 10
“In the online phase, the pattern of RSSIs acquired by a mobile device is compared to the pre-existing training data-set to estimate its position, using machine-learning approaches such as K-Near-est Neighbors (KNN), Support Vector Machines (SVM), and Neural Networks (NN) [12].”
Implementing the physical web using Bluetooth low energy based beacons and a mobile app
Rajpoot, S., Kumar, S., & Singh, P. (2016) · International Conference on Innovation and Challenges in Cyber Security (ICICCS-INBUSH) · doi:10.1109/iciccs.2016.7542300 · Cited by 10
“What makes the physical web a reality are the Beacons [3].”
BackgroundInfluentialAn indoor localization system by fusing smartphone inertial sensors and bluetooth low energy beacons
Li, J., Guo, M., & Li, S. (2017) · International Conference on Frontiers of Sensors Technologies (ICFST) · doi:10.1109/icfst.2017.8210527 · Cited by 10
“Comparing with fingerprint method, the localization accuracy of triangulation method is low which limits its application scenarios [9].”
MethodBluePrint: BLE Positioning Algorithm Based on NUFO Detection
Ho, Y. H., & Chan, H. C. B. (2017) · Globecom · doi:10.1109/glocom.2017.8254483 · Cited by 10
Non-parametric Error Modeling for Ultra-wideband Localization Networks
Haggenmiller, A., Krogius, M., & Olson, E. (2019) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2019.8794291 · Cited by 10
“A variety of sensor types may be used, including those based on WiFi access points [5], Bluetooth Low Energy (BLE) devices [6], chirp spread spectrum (CSS) radios [7], and ultra-wideband (UWB) radios [8].”
BackgroundRobust Low-Overhead RF-Based Localization for Realistic Environments
Elbakly, R., & Youssef, M. A. (2020) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2020.3034620 · Cited by 10
Five Degrees-of-Freedom Pose-Estimation Method for Smartphones Using a Single Acoustic Anchor
Murakami, H., Suzaki, T., Nakamura, M., Hashizume, H., & Sugimoto, M. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3047854 · Cited by 10
“In radio-signal-based localization for a smartphone, an RSSI-based position-estimation method using Wi-Fi [16]–[18] or BLE [19]–[21] has become widely used.”
MethodInfluentialJoint Visual and Wireless Signal Feature based Approach for High-Precision Indoor Localization
Wang, Y., Zhou, G., Xiang, C., Zhang, S., & Xu, S. (2020) · Globecom · doi:10.1109/globecom42002.2020.9322074 · Cited by 10
“Together with inertial navigation system (INS) [5], the GNSS based outdoor solution is able to reach meter level seamless localization accuracy, while it is still quite challenging to achieve the same level in the indoor environment using either Bluetooth low energy (BLE) [2] or widely deployed 3GPP LTE/5G and WiFi si…”
HarvestPrint: Securing Battery-free Backscatter Tags through Fingerprinting
Narayanan, R., Varshney, A., & Papadimitratos, P. (2021) · ACM Workshop on Hot Topics in Networks (HotNets) · doi:10.1145/3484266.3487388 · Cited by 10
Multisensor Data Fusion for Reliable Obstacle Avoidance
Canh, T. N., Nguyen, T. S., Quach, C. H., HoangVan, X., & Phung, M. D. (2022) · International Conference on Control, Automation and Information Sciences (ICCAIS) · doi:10.1109/iccais56082.2022.9990495 · Cited by 12
“Other sensors such as Inertial Measurement Units (IMU) [9], Ultra-Wide Band (UWB) [10], Wifi [11], and Bluetooth [12] can also be used for navigation and obstacle avoidance.”
MethodA location estimation method using mobile BLE tags with tandem scanners
Urano, K., Kaji, K., Hiroi, K., & Kawaguchi, N. (2017) · ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp) · doi:10.1145/3123024.3124405 · Cited by 10
“Faragher et al.[3] constructed signal strength maps for 7 tags in an office environment of 50 meters x 15 meters and achieved accuracy of about 5 meters.”
BackgroundCost-efficient BLE fingerprint database construction approach via multi-quadric RBF interpolation
Xie, L., Jin, X., Zhou, M., Wang, Y., & Tian, Z. (2019) · EURASIP Journal on Wireless Communications and Networking · doi:10.1186/s13638-019-1364-x · Cited by 10
Mohammed, M., He, C., Cincotta, S., Neild, A., & Armstrong, J. (2020) · Sensors · doi:10.3390/s20071977 · Cited by 10
“This contrasts with BLE positioning where a dedicated infrastructure is deployed, typically using battery operated beacons [6,7].”
BackgroundCompressive RF Fingerprint Acquisition and Broadcasting for Dense BLE Networks
Ng, P. C., She, J. P. M., & Ran, R. (2020) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2020.3024842 · Cited by 10
Indoor navigation using Bluetooth Low Energy (BLE) beacons
Vargas, M. H. (2016) · Cited by 10
Secure privacy preserving information beacons for public transportation systems
Schulz, T., Golatowski, F., & Timmermann, D. (2016) · IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops) · doi:10.1109/percomw.2016.7457096 · Cited by 9
“Devices with the peripheral role, in contrast to the central device which is in most scenarios the user’s hand-held device, send out an advertisement to be discovered.”
BackgroundAn Accurate Positioning Method Based on Time-Division Strategy for Indoor Moving Target
Cao, C., Zhu, Y., Zhao, L., Sun, D., Liu, Z., & Lian, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3284938 · Cited by 10
“Specifically, fingerprint-based Wi-Fi and Bluetooth positioning technologies are simple to implement and have good compatibility with smart devices, but its positioning accuracy is low, and the initial collection and regular update of fingerprints are time-consuming and labor-intensive [12], [13], [14], [15], [16].”
BackgroundContext-Aware Electronic Health Record—Internet of Things and Blockchain Approach
Guimarães, T. A. S., Duarte, R. J. D. S., Hak, F., & Santos, M. F. (2024) · Informatics · doi:10.3390/informatics11040098 · Cited by 9
Utilizing Bluetooth Low Energy to recognize proximity, touch and humans
Scheunemann, M. M., Dautenhahn, K., Salem, M., & Robins, B. (2016) · IEEE RO-MAN · doi:10.1109/roman.2016.7745156 · Cited by 9
“For example, more expensive beacons such as eddystone beacons allow a higher transmission rate than the proprietary iBeacon protocol, which may increase the accuracy of the underlying RSS measurmenets [8].”
BackgroundInfluentialDesign and Initial Evaluation of Bluetooth Low Energy Separate Channel Fingerprinting
Ishida, S., Takashima, Y., Tagashira, S., & Fukuda, A. (2018) · Studies in computational intelligence · doi:10.1007/978-3-319-70636-8_2 · Cited by 9
Automatic Data Acquisition with Robots for Indoor Fingerprinting
Năstac, I., Lohan, E. S., Iftimie, F. A., Arsene, O., & Cramariuc, B. (2018) · International Conference on Communications (COMM) · doi:10.1109/iccomm.2018.8484796 · Cited by 9
“It is well-known today that low-cost localization and tracking solutions can be achieved via Received Signal Strength (RSS) measurements from a variety of signals in range [4], such as cellular, WiFi [5], Bluetooth low Energy (BLE) [5], [6], Radio Frequency Identification (RFID) [7], [8], and, more recently Internet o…”
BackgroundEnergy Consumption and Proximity Accuracy of BLE Beacons for Internet of Things Applications
Mackey, A., & Spachos, P. (2018) · Global Information Infrastructure and Networking Symposium · doi:10.1109/giis.2018.8635746 · Cited by 9
“The fundamental operation of these beacons for localization purposes is based on RSSI techniques [10], [11], where the RSSI value is translated into a distance by using a best curve-fit signal propagation model.”
MethodEvaluation of BLE Separate Channel Fingerprinting in Practical Environment
Ishida, S., Takaki, S., Yamamoto, T., Tagashira, S., & Fukuda, A. (2018) · IIAI International Congress on Advanced Applied Informatics (IIAI-AAI) · doi:10.1109/iiai-aai.2018.00032 · Cited by 9
“Maximizing an advantage of the short discovery time, BLE fingerprinting was recently proposed [1].”
BackgroundA High Efficient Code for Visible Light Positioning System Based on Image Sensor
Qv, R., Feng, L., Yang, A., Guo, P. F., Lin, B., & Huang, H. (2019) · IEEE Access · doi:10.1109/access.2019.2921601 · Cited by 9
“Indoor positioning technologies include radio frequency identification (RFID) [2], wireless local area network (WIFI) positioning technology [3]and Bluetooth positioning technology [4].”
BackgroundA Novel Overlay Mesh with Bluetooth Low Energy Network
Ng, P. C., & She, J. P. M. (2019) · IEEE Wireless Communications and Networking Conference · doi:10.1109/wcnc.2019.8886069 · Cited by 9
“To date, BLE beacons have been widely deployed in many locations, including airports and shopping malls, to promote proximity marketing [1] [2] and provide localization services [3] [4].”
BackgroundAlsmadi, L., Kong, X., & Sandrasegaran, K. S. (2019) · International Symposium on Communications and Information Technologies · doi:10.1109/iscit.2019.8905189 · Cited by 9
“The modern smartphones are equipped with BLE technology which can be utilized for indoor positioning based on their RSSI values [13],[14].”
BackgroundAccuracy analysis of BLE beacon-based localization in smart buildings
Ivanov, R. (2021) · Journal of Ambient Intelligence and Smart Environments · doi:10.3233/ais-210607 · Cited by 9
The Usage of Extended Kalman Filter to Increase Navigation Accuracy of Mobile Units in Closed Spaces
Kereyev, A., Atanov, S. K., & Timur, T. Z. (2021) · IEEE International Conference on Smart Information Systems and Technologies (SIST) · doi:10.1109/sist50301.2021.9465903 · Cited by 9
SmartLOC: Indoor Localization with Smartphone Anchors for On-Demand Delivery
Ding, Y. C., Jiang, D., Liu, Y., Zhang, D., & He, T. (2021) · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies · doi:10.1145/3494972 · Cited by 9
“Other anchors like BLE beacons [20, 25] and landmarks [52, 70, 74, 96] have also been proposed, but not sustainable in city-wide on-demand delivery due to high-cost deployment or fingerprinting process and limited coverage in the indoor environment.”
Background
Metadata
- Authors
- Faragher, R., & Harle, R.
- Affiliations
- University of Cambridge (GB)
- Venue
- IEEE Journal on Selected Areas in Communications
- Published
- 2015-11
- Volume
- 33
- Issue
- 11
- Pages
- 2418-2428
- ISSN
- 0733-8716 (ISSN-L)
- OpenAlex
- W1893431417
- Cited by
- 879
- References
- 21
- Citations by year
- 2026: 39 · 2025: 70 · 2024: 63 · 2023: 63 · 2022: 82 · 2021: 105 · 2020: 114 · 2019: 111 · 2018: 114 · 2017: 76 · 2016: 38 · 2015: 3
- FWCI
- 37.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal on Selected Areas in Communications (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Wireless Communication Technologies
- Keywords
- Bluetooth Low Energy, location fingerprinting, indoor positioning, radio maps, beacons, fast fading, power consumption, transmission power
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.