Location Fingerprinting With Bluetooth Low Energy Beacons
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The complexity of indoor radio propagation has resulted in location-awareness being derived from empirical fingerprinting techniques, where positioning is performed via a previously-constructed radio map, usually of WiFi signals. The recent introduction of the Bluetooth Low Energy (BLE) radio protocol provides new opportunities for indoor location. It supports portable battery-powered beacons that can be easily distributed at low cost, giving it distinct advantages over WiFi. However, its differing use of the radio band brings new challenges too. In this work, we provide a detailed study of BLE fingerprinting using 19 beacons distributed around a ~600 m2testbed to position a consumer device. We demonstrate the high susceptibility of BLE to fast fading, show how to mitigate this, and quantify the true power cost of continuous BLE scanning. We further investigate the choice of key parameters in a BLE positioning system, including beacon density, transmit power, and transmit frequency. We also provide quantitative comparison with WiFi fingerprinting. Our results show advantages to the use of BLE beacons for positioning. For one-shot (push-to-fix) positioning we achieve2), compared to2) and <; 8.5 m for an established WiFi network in the same area.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Because the Wi-Fi APs and BLE beacons share the same frequency range (2.4 GHz) there may be interference problems [15], although: (1) interference problems usually occur when the number of access points is very large, something that did not happen in our case; (2) possible interference problems could be overcome by avoiding certain channels and taking into account the fact that Bluetooth”
From Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy (2017) · cites this paper as [15]
In the citing paper
“this is simply the consequence of the fact that BLE technology transmits advertisements on these channels to mitigate interference with other devices [15].”
From Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy (2017) · cites this paper as [15]
Citations
Cites
Survey of Wireless Indoor Positioning Techniques and Systems
Liu, H., Darabi, H., Banerjee, P., & Liu, J. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.905750 · Cited by 4,098 · cited 1×
“Indoor positioning is a mature research field, with many proposed technologies and techniques—comprehensive overviews can be found in [19], [18], [2].”
BackgroundThe Horus WLAN location determination system
Youssef, M., & Agrawala, A. (2005) · Proceedings of the 3rd international conference on Mobile systems, applications, and services · doi:10.1145/1067170.1067193 · Cited by 1,653 · cited 1×
“Here the focus is on radio positioning, specifically using the empirical fingerprinting techniques [3], [15], [17], [22] that avoid the need to model the complex radio propagation environment indoors by patternmatching to a previously surveyed map of radio signal strengths.”
BackgroundA Survey of Indoor Inertial Positioning Systems for Pedestrians
Harle, R. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.121912.00075 · Cited by 814 · cited 1×
“fingerprints with other sources to form hybrid systems, many of which are based on the idea of Simultaneous Localization and Mapping (SLAM) [10], [16] being applied to pedestrian dead reckoning [13].”
BackgroundSelf-citationWiFi-SLAM Using G aussian Process Latent Variable Models
Ferris, B., Fox, D., & Lawrence, N. D. (2007) · International Joint Conference on Artificial Intelligence · Cited by 610
Network Time Protocol Version 4: Protocol and Algorithms Specification
Mills, D., Burbank, J., & Kasch, W. (2010) · doi:10.17487/rfc5905 · Cited by 577
A comparative survey of WLAN location fingerprinting methods
Honkavirta, V., Perala, T., Ali-Loytty, S., & Piche, R. (2009) · 2009 6th Workshop on Positioning, Navigation and Communication · doi:10.1109/wpnc.2009.4907834 · Cited by 522
Enhancements to the RADAR User Location and Tracking System
Bahl, V., & Padmanabhan, V. (2000) · Cited by 507
Implementing a sentient computing system
Addlesee, M., Curwen, R., Hodges, S., Newman, J., Steggles, P., Ward, A., & Hopper, A. (2001) · Computer · doi:10.1109/2.940013 · Cited by 490 · cited 1×
“Ground Truth Location: The Active Bat system [1] was available throughout the testbed and was used to provide ground truth position.”
MethodA Survey of Indoor Positioning and Object Locating Systems
Koyuncu, H., & Yang, S. H. (2010) · Cited by 251
COMPASS: A probabilistic indoor positioning system based on 802.11 and digital compasses
King, T., Kopf, S., Haenselmann, T., Lubberger, C., & Effelsberg, W. (2006) · Proceedings of the 1st international workshop on Wireless network testbeds, experimental evaluation & characterization · doi:10.1145/1160987.1160995 · Cited by 223
Research works printed but not linked: 2
- ferris, 0, WiFi-SLAM using Gaussian process latent variable models, Proc 20th IJCAI, 2480
- 2010, Bluetooth Specification Version 4 0
Cited by
RSSI-Based Indoor Localization With the Internet of Things
Sadowski, S., & Spachos, P. (2018) · IEEE Access · doi:10.1109/access.2018.2843325 · Cited by 557
“With the recent emergence of BLE and beacons, it has becomemore feasible to place inexpensive beacons around an environment than it is to rearrange existing hardware and use that for localization [17], [18].”
BackgroundA Survey on Wearable Technology: History, State-of-the-Art and Current Challenges
Ometov, A., Shubina, V., Klus, L., Skibińska, J., Saafi, S., Pascacio, P., Flueratoru, L., Gaibor, D. Q., Chukhno, N., Chukhno, O., et al. (2021) · Computer Networks · doi:10.1016/j.comnet.2021.108074 · Cited by 506
Evolution of Indoor Positioning Technologies: A Survey
Brena, R. F., García-Vázquez, J. P., Galván-Tejada, C. E., Muñoz-Rodriguez, D., Vargas-Rosales, C., & Fangmeyer, J. (2017) · Journal of Sensors · doi:10.1155/2017/2630413 · Cited by 478
“As Bluetooth beacons compete with Wi-Fi, Faragher and Harle [59] provided a quantitative comparison with WiFi fingerprinting.”
BackgroundSmartphone-Based Indoor Localization with Bluetooth Low Energy Beacons
Zhuang, Y., Yang, J., Li, Y., Qi, L., & El-Sheimy, N. (2016) · Sensors · doi:10.3390/s16050596 · Cited by 449
“Related Work Current localization algorithms for BLE beacons can be divided into three classes: proximity [21–23], range-based [21,24–26] and FP [4,21,27,28].”
BackgroundMethodInfluentialSemisupervised Deep Reinforcement Learning in Support of IoT and Smart City Services
Mohammadi, M., Al-Fuqaha, A., Guizani, M., & Oh, J.-S. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2712560 · Cited by 435
“1) While WiFi fingerprinting has been studied widely in the past decade for indoor positioning and the accuracy is in the range of 10 m, Bluetooth low energy (BLE) is in its infancy for indoor localization and has yielded more fine-grained results [13].”
BackgroundBLE Beacons for Internet of Things Applications: Survey, Challenges, and Opportunities
Jeon, K. E., She, J., Soonsawad, P., & Ng, P. C. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2788449 · Cited by 391
“The feasibility of BLE beacon-based indoor localization systems is extensively investigated in [25], where Faragher and Harle discussed the accuracy that can be achieved with given deployment configurations and operation parameters, such as the deployment density, advertising interval, trans-”
BackgroundMethodFaheem, M., Shah, S. B. H., Butt, R. A., Raza, B., Anwar, M., Ashraf, M. W., Ngadi, M. A., & Gungor, V. C. (2018) · Computer Science Review · doi:10.1016/j.cosrev.2018.08.001 · Cited by 392
Robustness, Security and Privacy in Location-Based Services for Future IoT: A Survey
Chen, L., Thombre, S., Jarvinen, K., Lohan, E. S., Alen-Savikko, A., Leppakoski, H., Bhuiyan, M. Z. H., Bu-Pasha, S., Ferrara, G. N., Honkala, S., et al. (2017) · IEEE Access · doi:10.1109/access.2017.2695525 · Cited by 313
A Survey of Machine Learning for Indoor Positioning
Nessa, A., Adhikari, B., Hussain, F., & Fernando, X. N. (2020) · IEEE Access · doi:10.1109/access.2020.3039271 · Cited by 269
“It is a widely used indoor positioning method using various wireless access technology such as Wi-Fi, BLE, and ZigBee [45]–[47].”
BackgroundMethodA Meta-Review of Indoor Positioning Systems
Mendoza-Silva, G. M., Torres-Sospedra, J., & Huerta, J. (2019) · Sensors · doi:10.3390/s19204507 · Cited by 269
Zhuang, Y., Sun, X., Li, Y., Huai, J., Hua, L., Yang, X., Cao, X., Zhang, P., Cao, Y., Qi, L., et al. (2023) · Information Fusion · doi:10.1016/j.inffus.2023.01.025 · Cited by 262
BLE Beacons for Indoor Positioning at an Interactive IoT-Based Smart Museum
Spachos, P., & Plataniotis, K. N. (2020) · IEEE Systems Journal · doi:10.1109/jsyst.2020.2969088 · Cited by 241
“the packet was received, leading to important fading of 30 dB in very close positions [46].”
BackgroundElsanhoury, M., Makela, P., Koljonen, J., Valisuo, P., Shamsuzzoha, A., Mantere, T., Elmusrati, M., & Kuusniemi, H. (2022) · IEEE Access · doi:10.1109/access.2022.3169267 · Cited by 218
“Location fingerprinting, which provides a room-level or couple of metres accuracy, is commonly used with WLAN [61] and Bluetooth [62] received signal strength indicator (RSSI) measurements.”
MethodCantón Paterna, V., Calveras Augé, A., Paradells Aspas, J., & Pérez Bullones, M. (2017) · Sensors · doi:10.3390/s17122927 · Cited by 227
“In [26], the authors provided a study of BLE fingerprinting using beacons distributed around 600 m 2 to calculate the position of a device.”
BackgroundSmartphone Inertial Sensor-Based Indoor Localization and Tracking With iBeacon Corrections
Chen, Z., Zhu, Q., & Soh, Y. C. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2579265 · Cited by 210
“Various approaches, such as fingerprinting, triangulation, and WPL, can be applied for iBeacon-based localization, but the dense deployment of iBeacons is required [4], [5].”
BackgroundMethodMagnetic Field-Based Positioning Systems
Pasku, V., De Angelis, A., De Angelis, G., Arumugam, D. D., Dionigi, M., Carbone, P., Moschitta, A., & Ricketts, D. S. (2017) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2684087 · Cited by 187
“Typical accuracy of ZigBee based solutions combined with multipath mitigation techniques is of the order of 1–3 m, while Bluetooth systems offer room level accuracy.”
MethodInfluentialNguyen, C. T., Saputra, Y. M., Huynh, N. V., Nguyen, N.-T., Khoa, T. V., Tuan, B. M., Nguyen, D. N., Hoang, D. T., Vu, T. X., Dutkiewicz, E., et al. (2020) · IEEE Access · doi:10.1109/access.2020.3018140 · Cited by 160
“In [72], the authors show that the BLE technology is strongly affected by the fast fading and interference, resulting in a low accuracy when detecting the user’s device.”
BackgroundReview on UHF RFID Localization Methods
Li, C., Mo, L., & Zhang, D. (2019) · IEEE Journal of Radio Frequency Identification · doi:10.1109/jrfid.2019.2924346 · Cited by 173
Indoor Localization Improved by Spatial Context—A Survey
Gu, F., Hu, X., Ramezani, M., Acharya, D., Khoshelham, K., Valaee, S., & Shang, J. (2020) · ACM Computing Surveys · doi:10.1145/3322241 · Cited by 172
“The new generation of Bluetooth low-energy technology, which consumes much less power than WiFi technology, is promising to be widely used for localization and navigation [37, 197].”
BackgroundIndoor Positioning Technologies Without Offline Fingerprinting Map: A Survey
Jang, B., & Kim, H. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2867935 · Cited by 171
Bluetooth Localization Technology: Principles, Applications, and Future Trends
Zhuang, Y., Zhang, C., Huai, J., Li, Y., Chen, L., & Chen, R. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2022.3203414 · Cited by 159
“However, according to the experiment of Faragher and Harle [38], the accuracy improvement is not obvious when the density of the beacons exceeds a certain threshold.”
MethodBarua, A., Alamin, M. A. A., Hossain, M. S., & Hossain, E. (2022) · IEEE Open Journal of the Communications Society · doi:10.1109/ojcoms.2022.3149732 · Cited by 197
Indoor Smartphone Localization: A Hybrid WiFi RTT-RSS Ranging Approach
Guo, G., Chen, R., Ye, F., Peng, X., Liu, Z., & Pan, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2957753 · Cited by 164
MetaLoc: Learning to Learn Wireless Localization
Gao, J., Wu, D., Yin, F., Kong, Q., Xu, L., & Cui, S. R. (2023) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2023.3322766 · Cited by 163
An Indoor Location-Based Control System Using Bluetooth Beacons for IoT Systems
Huh, J., & Seo, K. (2017) · Sensors · doi:10.3390/s17122917 · Cited by 143
“demonstrated that significant positioning improvement over Wi-Fi is possible using even a relatively sparse deployment of beacons once the characteristics of BLE signals are accounted for [13].”
BackgroundSensing, communication and security planes: A new challenge for a smart city system design
Habibzadeh, H., Soyata, T., Kantarcı, B., Boukerche, A., & Kaptan, C. (2018) · Computer Networks · doi:10.1016/j.comnet.2018.08.001 · Cited by 146
On Indoor Localization Using WiFi, BLE, UWB, and IMU Technologies
Leitch, S. G., Ahmed, Q. Z., Abbas, W. B., Hafeez, M., Lazaridis, P. I., Sureephong, P., & Alade, T. T. (2023) · Sensors · doi:10.3390/s23208598 · Cited by 153
“Theoretically, fingerprinting techniques are capable of localizing using a single beacon, and would fall into this latter group; however, most practical applications use multiple beacons [10] or fuse them with other technologies [86].”
BackgroundMethodInfluentialA Survey of Smartphone-Based Indoor Positioning System Using RF-Based Wireless Technologies
Subedi, S., & Pyun, J.-Y. (2020) · Sensors · doi:10.3390/s20247230 · Cited by 145
“Similarly, the literature that employ BLE for probability-based fingerprinting are presented in [59,151].”
BackgroundMethodInfluentialA Novel 3-D Indoor Localization Algorithm Based on BLE and Multiple Sensors
Yu, Y., Chen, R., Chen, L., Zheng, X., Wu, D., Li, W., & Wu, Y. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3055794 · Cited by 128
“Faragher and Harle [28] proposed a fingerprint-based localization algorithm using RSSI acquired from local BLE nodes.”
Method3-D BLE Indoor Localization Based on Denoising Autoencoder
Xiao, C., Yang, D., Chen, Z., & Tan, G. (2017) · IEEE Access · doi:10.1109/access.2017.2720164 · Cited by 130
“Similar with other wireless techniques, BLE can be used from two different approaches: trilateration [20] and fingerprinting [21], [22].”
MethodThe Principle, Methods and Recent Progress in RFID Positioning Techniques: A Review
Xu, J., Li, Z., Zhang, K., Yang, J., Gao, N., Zhang, Z., & Meng, Z. (2023) · IEEE Journal of Radio Frequency Identification · doi:10.1109/jrfid.2022.3233855 · Cited by 137
Luo, R. C., & Hsiao, T. J. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2938893 · Cited by 128
“a few months to a year, can be deployed in buildings with high density and low cost [16].”
BackgroundA Review of Technologies and Techniques for Indoor Navigation Systems for the Visually Impaired
Simões, W. C. S. S., Machado, G. S., de Sales, A. M. A., Lucena, M., Jazdi, N., & de Lucena, V. F. (2020) · Sensors · doi:10.3390/s20143935 · Cited by 122
“Bluetooth is a wireless communication technology that uses information that is digitally incorporated into radio frequency signals [58,61].”
BackgroundMethodInfluentialKanellopoulos, D., Sharma, V. K., Panagiotakopoulos, T., & Kameas, A. (2023) · Electronics · doi:10.3390/electronics12112490 · Cited by 120
“Due to BLE’s greater susceptibility to abrupt fading and substantial changes in received signal strength, it has been proven that using BLE is more efficient than using WiFi-based solutions [99,101].”
MethodA Precise Dead Reckoning Algorithm Based on Bluetooth and Multiple Sensors
Yu, N., Zhan, X., Zhao, S., Wu, Y., & Feng, R. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2784386 · Cited by 117
“Faragher and Harle [12] proposed a positioning method”
MethodInfluentialImproving BLE Beacon Proximity Estimation Accuracy Through Bayesian Filtering
Mackey, A., Spachos, P., Song, L., & Plataniotis, K. N. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.2965583 · Cited by 117
“In [20], the development and testing of location fingerprinting using BLE beacons are shown, where fingerprinting relies on a previously constructed radio map of the deployment region.”
MethodA stigmergic approach to indoor localization using Bluetooth Low Energy beacons
Palumbo, F., Barsocchi, P., Chessa, S., & Augusto, J. C. (2015) · IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS) · doi:10.1109/avss.2015.7301734 · Cited by 112
“Experimental results in [10] have shown that BLE beacons present up to 30dB drops in the signal strength received by a mobile node moving towards them across just 10cm.”
BackgroundDeep learning methods for fingerprint-based indoor positioning: a review
Alhomayani, F. M., & Mahoor, M. H. (2020) · Journal of Location Based Services · doi:10.1080/17489725.2020.1817582 · Cited by 133
“Regarding fingerprinting, Faragher and Harle [18] investigated the feasibility of using BLE fingerprints for fine-grained indoor positioning.”
BackgroundInfluentialBluetooth Low Energy Based Occupancy Detection for Emergency Management
Filippoupolitis, A., Oliff, W., & Loukas, G. (2016) · International Conference on Ubiquitous Computing and Communications (IUCC) · doi:10.1109/iucc-css.2016.013 · Cited by 110
“In [14], the authors explore the advantage of BLE over WiFi for indoor positioning.”
BackgroundA review of assistive spatial orientation and navigation technologies for the visually impaired
Fernandes, H., Costa, P., Filipe, V. M. D. J., Paredes, H., & Barroso, J. (2017) · Universal Access in the Information Society · doi:10.1007/s10209-017-0570-8 · Cited by 108
“The required time and costly signal strength system calibration is very high in the beginning [43, 44].”
BackgroundIndoor Localization on Smartphones Using Built-In Sensors and Map Constraints
Xia, H., Zuo, J., Liu, S., & Qiao, Y. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2863478 · Cited by 108
“In [7] and [31], the RSSI fingerprinting-based methods were used.”
BackgroundMethodInfluentialSmartphone-based Indoor Localization for Blind Navigation across Building Complexes
Murata, M., Ahmetovic, D., Sato, D., Takagi, H., Kitani, K., & Asakawa, C. (2018) · IEEE International Conference on Pervasive Computing and Communications · doi:10.1109/percom.2018.8444593 · Cited by 104
“In contrast, BLE based localization has gained prominence following the introduction of the BLE protocol standard and the commercialization of off-the-shelf BLE beacon transmitters [24], [14], [25].”
Indoor positioning system based on BLE location fingerprinting with classification approach
Pu, Y.-C., & You, P.-C. (2018) · Applied Mathematical Modelling · doi:10.1016/j.apm.2018.06.031 · Cited by 103
Model-Based Localization and Tracking Using Bluetooth Low-Energy Beacons
Daniş, F. S., & Cemgil, A. T. (2017) · Sensors · doi:10.3390/s17112484 · Cited by 101
“…a Bayesian estimator as the main method for positioning with a grid size of 1 m, and achieve a tracking accuracy of 2.6 m using a dense beacon distribution and 4.8 m using a sparse distribution, which, as they claim, is a significant improvement over Wi-Fi even using sparse beacon deployment [27].”
MethodInfluentialA Data-Driven Inertial Navigation/Bluetooth Fusion Algorithm for Indoor Localization
Chen, J., Zhou, B., Bao, S., Liu, X., Gu, Z., Li, L., Zhao, Y., Zhu, J., & Li, Q. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3089516 · Cited by 101
Machine Learning for Time-of-Arrival Estimation With 5G Signals in Indoor Positioning
Liu, Z., Chen, L., Zhou, X., Jiao, Z., Guo, G., & Chen, R. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3234123 · Cited by 110
“Presently, the widely used SoP in indoor positioning mainly includes WiFi [7], [8], [9], [10], [11], Bluetooth [12], [13], [14], and cellular wireless network signals [15], [16], [17], [18].”
BackgroundMethodPractical Fingerprinting Localization for Indoor Positioning System by Using Beacons
Subedi, S., & Pyun, J.-Y. (2017) · Journal of Sensors · doi:10.1155/2017/9742170 · Cited by 99
“A research work presented in [16] has reported that the power draw of the mobile device (tag) is lower for BLE than for Wi-Fi.”
BackgroundBeyond beaconing: Emerging applications and challenges of BLE
Yang, J., Poellabauer, C., Mitra, P., & Neubecker, C. (2019) · Ad Hoc Networks · doi:10.1016/j.adhoc.2019.102015 · Cited by 110
“Examples of using BLE Beacons include indoor positioning [4, 5], activity recognition [6, 7], and vehicle network wake-up system [8] .”
BackgroundMethodMachine learning in indoor visible light positioning systems: A review
Tran, H. Q., & Ha, C. (2022) · Neurocomputing · doi:10.1016/j.neucom.2021.10.123 · Cited by 102
Enhancing Job Performance: The Critical Roles of Well-Being, Satisfaction, and Trust in Supervisor
Yang, Y., Obrenovic, B., Kamotho, D. W., Godinić, D., & Ostic, D. (2024) · Behavioral Sciences · doi:10.3390/bs14080688 · Cited by 127
“Accordingly, future studies could focus on the job satisfaction–job performance nuances in this new context.”
BackgroundIndoor positioning of shoppers using a network of Bluetooth Low Energy beacons
Dickinson, P., Cielniak, G., Szymanezyk, O., & Mannion, M. (2016) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2016.7743684 · Cited by 92
“[14] R. Faragher, R. Harle, “An Analysis of the Accuracy of Bluetooth Low Energy for Indoor Positioning Applications”, Proceedings of the 27th International Technical Meeting of the Satellite Division of the Institute of Navigation, Tampa, Florida, September 2014.”
BackgroundMethodResultInfluentialGarcía, G. C., Ruiz, I. L., & Gómez‐Nieto, M. Á. (2016) · Sensors · doi:10.3390/s16111968 · Cited by 102
“RSSI (1 byte): This is a value that indicates the intensity of the signal at one metre from the device.”
MethodIoT-based system for indoor location using bluetooth low energy
Terán, M., Aranda, J. M., Carrillo, H., Méndez, D., & Parra, C. (2017) · IEEE Colombian Conference on Communications and Computing (COLCOM) · doi:10.1109/colcomcon.2017.8088211 · Cited by 88
“All the data acquisition process was made following the recommendations from [10].”
MethodInfluentialPositioning Methods and the Use of Location and Activity Data in Forests
Keefe, R. F., Wempe, A. M., Becker, R. M., Zimbelman, E. G., Nagler, E. S., Gilbert, S. L., & Caudill, C. C. (2019) · Forests · doi:10.3390/f10050458 · Cited by 93
“BLE can accurately position within approximately 2–5 m indoors [117], but operates at shorter ranges (up to 50 m) [26] compared to Bluetooth (up to 100 m for version 4.”
BackgroundFingerprint and Assistant Nodes Based Wi-Fi Localization in Complex Indoor Environment
Li, Q., Li, W., Sun, W., Li, J., & Liu, Z. (2016) · IEEE Access · doi:10.1109/access.2016.2579879 · Cited by 84
“Nevertheless, Ramsey Faragher examines the unique properties of BLE (Bluetooth Low Energy) signals and studies the application of fingerprinting to locate BLE devices in an environment with BLE beacons without considering the effect of people walking and the number of APs on the positioning accuracy [17].”
BackgroundAn Overview on Position Location: Past, Present, Future
Zekavat, S. A. R., Buehrer, R. M., Durgin, G. D., Lovisolo, L., Wang, Z., Goh, S. T., & Ghasemi, A. R. (2021) · International Journal of Wireless Information Networks · doi:10.1007/s10776-021-00504-z · Cited by 90
Indoor Bluetooth Low Energy Dataset for Localization, Tracking, Occupancy, and Social Interaction
Baronti, P., Barsocchi, P., Chessa, S., Mavilia, F., & Palumbo, F. (2018) · Sensors · doi:10.3390/s18124462 · Cited by 79
“With regard to the localization and tracking scenario, the most exploited source of information is represented by RSS fingerprinting [12,25].”
BackgroundBLE Beacons in the Smart City: Applications, Challenges, and Research Opportunities
Spachos, P., & Plataniotis, K. (2020) · IEEE Internet of Things Magazine · doi:10.1109/iotm.0001.1900073 · Cited by 79
“A popular wireless technology for short-range communication is Bluetooth [8].”
BackgroundMethodInfluentialWang, S., & Ahmad, N. S. (2024) · IEEE Access · doi:10.1109/access.2024.3519874 · Cited by 91
“Currently, BLE indoor positioning is based on Bluetooth beacon positioning [32].”
Novel iBeacon Placement for Indoor Positioning in IoT
Rezazadeh, J., Subramanian, R., Sandrasegaran, K. S., Kong, X., Moradi, M., & Khodamoradi, F. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2875037 · Cited by 75
A Hybrid Method to Improve the BLE-Based Indoor Positioning in a Dense Bluetooth Environment
Huang, K., He, K., & Xue-cheng, D. (2019) · Sensors · doi:10.3390/s19020424 · Cited by 74
“The fingerprinting algorithm relies on a previously-constructed radio map of BLE signals, in which measurements are collected from the environment and calibrated into specific features, called fingerprints, which describe a part of the environment [16].”
MethodSmart Pipe System for a Shipyard 4.0
Fraga-Lamas, P., Noceda-Davila, D., Fernández-Caramés, T., Díaz-Bouza, M., & Vilar-Montesinos, M. (2016) · Sensors · doi:10.3390/s16122186 · Cited by 73
“LiFS [70] Medium sized building (1.600m 2 ) Wi-Fi 89% room level accuracy Walkie-Markie [71] Medium size office (3.600m 2 ) and shopping mall Wi-Fi ∼ 1.65m RADAR [72] Area 975 m 2 , more than 50 rooms Wi-Fi ∼ 3-5m Horus [73] 4th floor of the Computer Science building Wi-Fi ∼ 3-5m AiRISTA Flow[74] Asset tracking Wi-Fi…”
BackgroundInfluentialBeacon based indoor positioning system using weighted centroid localization approach
Subedi, S., Kwon, G., Shin, S., Hwang, S.-S., & Pyun, J.-Y. (2016) · International Conference on Ubiquitous and Future Networks · doi:10.1109/icufn.2016.7536951 · Cited by 73
“Also, another fingerprinting example with BLE has been demonstrated in [4] using various beacons densities.”
MethodSmartphone-based localization for blind navigation in building-scale indoor environments
Murata, M., Ahmetovic, D., Sato, D., Takagi, H., Kitani, K., & Asakawa, C. (2019) · Pervasive and Mobile Computing · doi:10.1016/j.pmcj.2019.04.003 · Cited by 73
“While the characteristics of BLE fingerprints and WiFi fingerprints are different [15], handling delay in reported BLE RSS values on a smartphone is also essential to improve the localization performance, especially when a user is moving.”
BackgroundMethodInfluentialPoveda-García, M., Gómez-Alcaraz, A., Rebenaque, D. C., Martinez-Sala, A. S., & Gómez‐Tornero, J. L. (2020) · IEEE Access · doi:10.1109/access.2020.2965233 · Cited by 83
“The BLE fingerprinting approach provides more accurate predictions, but it relies on cumbersome on-site surveys to construct the reference radio map [9], [10].”
MethodDong, Y., Arslan, T., & Yang, Y. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3119234 · Cited by 72
“Numerous indoor positioning methods have been proposed to fill the vacancy of providing location-based services (LBS) in indoor scenario these years, such as WiFi [3]– [5], ultra-wideband (UWB) [6]–[8], Radio Frequency Identification Device (RFID) [9]–[11], Bluetooth [12]–[14].”
BackgroundSubedi, S., Gang, H.-S., Ko, N. Y., Hwang, S.-S., & Pyun, J.-Y. (2019) · IEEE Access · doi:10.1109/access.2019.2902564 · Cited by 70
“gerprinting used the probabilistic approach for localization estimation [16].”
MethodAfzalan, M., & Jazizadeh, F. (2019) · ACM Computing Surveys · doi:10.1145/3299769 · Cited by 69
Tran, H. Q., & Ha, C. (2019) · Applied Sciences · doi:10.3390/app9061048 · Cited by 74
A Robust Indoor Positioning Method based on Bluetooth Low Energy with Separate Channel Information
Huang, B., Liu, J., Sun, W., & Yang, F. (2019) · Sensors · doi:10.3390/s19163487 · Cited by 68
“Similarly, BLE has 40 channels on the 2.4 GHz band, and each channel has a bandwidth of 2 MHz [14].”
BackgroundInfluentialGRNN and KF framework based real time target tracking using PSOC BLE and smartphone
Jondhale, S. R., & Deshpande, R. S. (2018) · Ad Hoc Networks · doi:10.1016/j.adhoc.2018.09.017 · Cited by 66
A Robust Zero-Calibration RF-Based Localization System for Realistic Environments
Elbakly, R., & Youssef, M. A. (2016) · IEEE International Conference on Sensing, Communication, and Networking (SECON) · doi:10.1109/sahcn.2016.7732967 · Cited by 66
Achieving Practical and Accurate Indoor Navigation for People with Visual Impairments
Ahmetovic, D., Murata, M., Gleason, C., Brady, E. L., Takagi, H., Kitani, K., & Asakawa, C. (2017) · International Web for All Conference (W4A) · doi:10.1145/3058555.3058560 · Cited by 72
“Existing work examine how deployment parameters and signal settings influence localization accuracy [Faragher and Harle 2015].”
BackgroundFeasibility of LoRa for Smart Home Indoor Localization
Kim, K., Li, S., Heydariaan, M., Smaoui, N., Gnawali, O. D., Suh, W., Suh, M. J., & Kim, J. I. (2021) · Applied Sciences · doi:10.3390/app11010415 · Cited by 65
“Another powerful technology is BLE, which acquires radio frequency (RF) signals and utilizes the received signal strength indicator (RSSI) value to identify the real-time localization [22].”
BackgroundBLE RSS Measurements Dataset for Research on Accurate Indoor Positioning
Mendoza-Silva, G. M., Matey-Sanz, M., Torres-Sospedra, J., & Huerta, J. (2019) · Data · doi:10.3390/data4010012 · Cited by 64
“BLE-based positioning methods are able to obtain higher accuracies than those based on Wi-Fi [3,11].”
BackgroundMethodInfluential5G Internet of Radio Light Positioning System for Indoor Broadcasting Service
Shi, L., Shi, D., Zhang, X., Meunier, B., Zhang, H., Wang, Z., Vladimirescu, A., Li, W., Zhang, Y., Cosmas, J., et al. (2020) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2020.2981755 · Cited by 63
“…research of emerging technologies for indoor positioning is on-going [12]–[22], for example, Wi-Fi [18], Frequency Modulation (FM) broadcast technology (ex. digital television terrestrial broadcasting (DTTB) [19]), Bluetooth [16], [20], RFID [21], Ultra-wideband (UWB) [13]–[17], ZigBee [14], etc.”
BackgroundMultimodal Indoor Localization: Fusion Possibilities of Ultrasonic and Bluetooth Low-Energy Data
Fischer, G., Bordoy, J., Schott, D. J., Xiong, W., Gabbrielli, A., Höflinger, F., Fischer, K., Schindelhauer, C., & Rupitsch, S. J. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3148529 · Cited by 61
Performance analysis of fingerprinting indoor positioning methods with BLE
Aranda, F. J., Parralejo, F., Álvarez, F. J., & Paredes, J. A. (2022) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.117095 · Cited by 65
Monitoring harness use in construction with BLE beacons
Gómez-de-Gabriel, J. M., Fernández‐Madrigal, J., López-Arquillos, A., & Rubio‐Romero, J. C. (2018) · Measurement · doi:10.1016/j.measurement.2018.07.093 · Cited by 61
Deep Learning-Based Indoor Localization Using Multi-View BLE Signal
Koutris, A., Siozos, T., Kopsinis, Y., Pikrakis, A., Merk, T., Mahlig, M., Papaharalabos, S., & Karlsson, P. (2022) · Sensors · doi:10.3390/s22072759 · Cited by 60
Tran, H. Q., & Ha, C. (2020) · IEEE Access · doi:10.1109/access.2020.3003977 · Cited by 60
“The RSS is a popular, simple approach that provides acceptable positioning error for indoor positioning applications [13]; This approach is also applied for other types of signals such as WIFI [15], [16], Bluetooth [17], [18], Lorawan [13], and Zigbee [19], [20].”
MethodStudy on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy
De Blasio, G., Quesada-Arencibia, A., García, C., Molina-Gil, J., & Caballero-Gil, C. (2017) · Sensors · doi:10.3390/s17061299 · Cited by 59
“In our case, even working in aggregate mode, this effect is reflected in the multimodal distribution hown in the histogram of Figure 16b; thi is simply the consequence of the fact that BLE technology transmits advertisements on these channel to mitigate interference with other d vices [15].”
BackgroundMethodInfluentialWireless Positioning in IoT: A Look at Current and Future Trends
Silva, P. F. E., Kaseva, V. A., & Lohan, E. S. (2018) · Sensors · doi:10.3390/s18082470 · Cited by 66
“BLEmesh mesh LR/LP-Short range +,+++ +,+ ++,+ Medium Power [11,16,17] Dash7 star LR/LP-Long range +,+++ +,+ ++,++ Low Power or Space”
BackgroundBluetooth low energy indoor localization for large industrial areas and limited infrastructure
Szyc, K., Nikodem, M., & Zdunek, M. (2022) · Ad Hoc Networks · doi:10.1016/j.adhoc.2022.103024 · Cited by 59
Tseng, P., Chan, Y.-C., Lin, Y.-J., Lin, D., Wu, N., & Wang, T.-M. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2622799 · Cited by 59
“, cellular [4], WiFi [5], and Bluetooth systems [6].”
BackgroundIndoor navigation systems based on data mining techniques in internet of things: a survey
Sattarian, M., Rezazadeh, J., Farahbakhsh, R., & Bagheri, A. (2018) · Wireless Networks · doi:10.1007/s11276-018-1766-4 · Cited by 59
“A considerable number of studies have been carried out to identify users position and carry out tracking of object in indoor environments with support of fingerprinting with blue-tooth low energy beacons [26, 27].”
BackgroundA Comprehensive Survey of Machine Learning Based Localization with Wireless SignalsPreprint
Burghal, D., Ravi, A. T., Rao, V. V., Alghafis, A., & Molisch, A. F. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2012.11171 · Cited by 84
“With the growing commercial interest in proximity based Services, localization using Bluetooth Low Energy (BLE) has attracted considerable attention [245], especially after major companies such as Apple and Google released their BLE protocols, iBeacon and Eddystone, respectively.”
BackgroundMethodFineLoc: A Fine-Grained Self-Calibrating Wireless Indoor Localization System
Tong, X., Liu, K., Tian, X., Fu, L., & Wang, X. (2018) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2018.2871206 · Cited by 58
“Research efforts also have been dedicated to building BLE based localization systems [12], [32],”
BackgroundExperimental Demonstration of BLE Transmitter Positioning Based on AOA Estimation
Monfared, S. S. M., Nguyen, T.-H., Petrillo, L., Doncker, P. D., & Horlin, F. (2018) · IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc.2018.8580796 · Cited by 58
“Moreover, papers [7] and [8] presented a BLE transmitter positioning method based on the RSSI approach.”
MethodExperience: practical indoor localization for malls
Hu, Y., Qian, F., Yin, Z., Li, Z., Ji, Z., Han, Y., Xu, Q., & Jiang, W. (2022) · ACM Annual International Conference on Mobile Computing and Networking (MobiCom) · doi:10.1145/3495243.3517021 · Cited by 56
“Researchers have developed numerous techniques and models for indoor localization, such as fingerprinting [7, 13, 20, 22, 28, 41, 46, 54], RSSI propagation models [7, 10, 11, 21, 48], wireless models [6, 24, 35, 49, 57, 58] such as angel of arrival (AoA) [57] and Time of flight (ToF) [35, 49], dead reckoning [40], cro…”
A Protocol-Channel-Based Indoor Positioning Performance Study for Bluetooth Low Energy
de Blasio, G., Quesada-Arencibia, A., García, C. R., Rodríguez-Rodríguez, J. C., & Moreno-Díaz, R. (2018) · IEEE Access · doi:10.1109/access.2018.2837497 · Cited by 59
“Faragher and Harle [1] were among the first to conduct experimental tests of fine-grained BLE positioning and a”
BackgroundMethodInfluentialBluetooth Based Indoor Positioning Using Machine Learning Algorithms
Sthapit, P., Gang, H.-S., & Pyun, J.-Y. (2018) · IEEE International Conference on Consumer Electronics-Asia (ICCE-Asia) · doi:10.1109/icce-asia.2018.8552138 · Cited by 56
“Also, another fingerprinting example with BLE has been demonstrated under the various beacon densities in [11].”
Fundamentals of Wireless Sensor Networks
Jondhale, S. R., Maheswar, R., & Lloret, J. (2021) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-030-74061-0_1 · Cited by 56
Do we need a contact tracing app?
Maccari, L., & Cagno, V. (2020) · Computer Communications · doi:10.1016/j.comcom.2020.11.007 · Cited by 55
“When people walk there can be drops in the measured RSS up to 30 dB [17].”
BackgroundLu, C.-L., Liu, Z., Huang, J.-T., Huang, C.-I., Wang, B.-H., Chen, Y., Wu, N.-H., Wang, H., Giarré, L., & Kuo, P.-Y. P. (2021) · Frontiers in Robotics and AI · doi:10.3389/frobt.2021.654132 · Cited by 61
“In general a positioning error of 2.6 m is achieved 95% of the time for a dense BLE network (one beacon per 30 m 2 ) (Faragher and Harle, 2015).”
BackgroundInfluentialNiu, X., Liu, T., Kuang, J., Zhang, Q., & Guo, C. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3113398 · Cited by 54
“Wireless positioning mainly includes WiFi [2, 3], Bluetooth low energy (BLE) [4], ZigBee [5], radio-frequency identification (RFID) tags [6], acoustic [7], and ultrawideband (UWB) [8].”
BackgroundChiasson, D., Lin, Y., Kok, M., & Shull, P. B. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3243384 · Cited by 53
“This work will focus on timing-based methods for radio localization, but alternatives include receive signal strength [22], [23], angle of arrival [24], [25], and fingerprinting [26], [27].”
Finding objects using UWB or BLE localization technology: A museum-like use case
Jiménez, A. R., & Seco, F. A. (2017) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2017.8115865 · Cited by 53
“Depending on the final channel used for RSS registration some important fading can occur with drops of 30 dB in very close positions [10].”
MethodBluetooth-Based Indoor Positioning Through ToF and RSSI Data Fusion
Giovanelli, D., Farella, E., Fontanelli, D., & Macii, D. (2018) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2018.8533853 · Cited by 53
“A well-known approach to mitigate the effect of severe and hardly predictable multi-path and Non-Line-Of-Sight (NLOS) conditions is fingerprinting [12], [5].”
BackgroundIndoor Localization Based on Infrared Angle of Arrival Sensor Network
Arbula, D., & Ljubić, S. (2020) · Sensors · doi:10.3390/s20216278 · Cited by 53
“Nevertheless, it is hard to achieve sub-meter precision, i.e., Faragher and Harle [10] report tracking accuracies of 2.6 m in 95% of the time with a density of one beacon in 30 m 2 .”
BackgroundInfluential
Metadata
- Authors
- Faragher, R., & Harle, R.
- Affiliations
- University of Cambridge (GB)
- Venue
- IEEE Journal on Selected Areas in Communications
- Published
- 2015-11
- Volume
- 33
- Issue
- 11
- Pages
- 2418-2428
- ISSN
- 0733-8716 (ISSN-L)
- OpenAlex
- W1893431417
- Cited by
- 879
- References
- 21
- Citations by year
- 2026: 39 · 2025: 70 · 2024: 63 · 2023: 63 · 2022: 82 · 2021: 105 · 2020: 114 · 2019: 111 · 2018: 114 · 2017: 76 · 2016: 38 · 2015: 3
- FWCI
- 37.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal on Selected Areas in Communications (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Wireless Communication Technologies
- Keywords
- Bluetooth Low Energy, location fingerprinting, indoor positioning, radio maps, beacons, fast fading, power consumption, transmission power
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.