Location Fingerprinting With Bluetooth Low Energy Beacons
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The complexity of indoor radio propagation has resulted in location-awareness being derived from empirical fingerprinting techniques, where positioning is performed via a previously-constructed radio map, usually of WiFi signals. The recent introduction of the Bluetooth Low Energy (BLE) radio protocol provides new opportunities for indoor location. It supports portable battery-powered beacons that can be easily distributed at low cost, giving it distinct advantages over WiFi. However, its differing use of the radio band brings new challenges too. In this work, we provide a detailed study of BLE fingerprinting using 19 beacons distributed around a ~600 m2testbed to position a consumer device. We demonstrate the high susceptibility of BLE to fast fading, show how to mitigate this, and quantify the true power cost of continuous BLE scanning. We further investigate the choice of key parameters in a BLE positioning system, including beacon density, transmit power, and transmit frequency. We also provide quantitative comparison with WiFi fingerprinting. Our results show advantages to the use of BLE beacons for positioning. For one-shot (push-to-fix) positioning we achieve2), compared to2) and <; 8.5 m for an established WiFi network in the same area.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Because the Wi-Fi APs and BLE beacons share the same frequency range (2.4 GHz) there may be interference problems [15], although: (1) interference problems usually occur when the number of access points is very large, something that did not happen in our case; (2) possible interference problems could be overcome by avoiding certain channels and taking into account the fact that Bluetooth”
From Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy (2017) · cites this paper as [15]
In the citing paper
“this is simply the consequence of the fact that BLE technology transmits advertisements on these channels to mitigate interference with other devices [15].”
From Study on an Indoor Positioning System for Harsh Environments Based on Wi-Fi and Bluetooth Low Energy (2017) · cites this paper as [15]
Citations
Cites
Survey of Wireless Indoor Positioning Techniques and Systems
Liu, H., Darabi, H., Banerjee, P., & Liu, J. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.905750 · Cited by 4,098 · cited 1×
“Indoor positioning is a mature research field, with many proposed technologies and techniques—comprehensive overviews can be found in [19], [18], [2].”
BackgroundThe Horus WLAN location determination system
Youssef, M., & Agrawala, A. (2005) · Proceedings of the 3rd international conference on Mobile systems, applications, and services · doi:10.1145/1067170.1067193 · Cited by 1,653 · cited 1×
“Here the focus is on radio positioning, specifically using the empirical fingerprinting techniques [3], [15], [17], [22] that avoid the need to model the complex radio propagation environment indoors by patternmatching to a previously surveyed map of radio signal strengths.”
BackgroundA Survey of Indoor Inertial Positioning Systems for Pedestrians
Harle, R. (2013) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2012.121912.00075 · Cited by 814 · cited 1×
“fingerprints with other sources to form hybrid systems, many of which are based on the idea of Simultaneous Localization and Mapping (SLAM) [10], [16] being applied to pedestrian dead reckoning [13].”
BackgroundSelf-citationWiFi-SLAM Using G aussian Process Latent Variable Models
Ferris, B., Fox, D., & Lawrence, N. D. (2007) · International Joint Conference on Artificial Intelligence · Cited by 610
Network Time Protocol Version 4: Protocol and Algorithms Specification
Mills, D., Burbank, J., & Kasch, W. (2010) · doi:10.17487/rfc5905 · Cited by 577
A comparative survey of WLAN location fingerprinting methods
Honkavirta, V., Perala, T., Ali-Loytty, S., & Piche, R. (2009) · 2009 6th Workshop on Positioning, Navigation and Communication · doi:10.1109/wpnc.2009.4907834 · Cited by 522
Enhancements to the RADAR User Location and Tracking System
Bahl, V., & Padmanabhan, V. (2000) · Cited by 507
Implementing a sentient computing system
Addlesee, M., Curwen, R., Hodges, S., Newman, J., Steggles, P., Ward, A., & Hopper, A. (2001) · Computer · doi:10.1109/2.940013 · Cited by 490 · cited 1×
“Ground Truth Location: The Active Bat system [1] was available throughout the testbed and was used to provide ground truth position.”
MethodA Survey of Indoor Positioning and Object Locating Systems
Koyuncu, H., & Yang, S. H. (2010) · Cited by 251
COMPASS: A probabilistic indoor positioning system based on 802.11 and digital compasses
King, T., Kopf, S., Haenselmann, T., Lubberger, C., & Effelsberg, W. (2006) · Proceedings of the 1st international workshop on Wireless network testbeds, experimental evaluation & characterization · doi:10.1145/1160987.1160995 · Cited by 223
Research works printed but not linked: 2
- ferris, 0, WiFi-SLAM using Gaussian process latent variable models, Proc 20th IJCAI, 2480
- 2010, Bluetooth Specification Version 4 0
Cited by
Items 401–500 of 917
A Beacons Selection Method under Random Interference for Indoor Positioning
Guo, Y., Zheng, J., Di, S., Xiang, G., & Guo, F. (2022) · Remote Sensing · doi:10.3390/rs14174323 · Cited by 9
Ad-hoc collision avoidance system for Industrial IoT
García-Carrillo, D., Pañeda, X. G., Melendi, D., García, R., Magaña, V. C., & Martínez, D. (2024) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2024.100575 · Cited by 9
A Comprehensive Study on BLE Enabled IoT Based Tracking System (BITS) for Indoor Environment
Roy, P., Mondal, S., Biswas, A., & Banerjee, R. (2024) · International Conference on Intelligent Data Communication Technologies and Internet of Things (IDCIoT) · doi:10.1109/idciot59759.2024.10467984 · Cited by 9
“In one of the papers [6] the author employs active badge for the indoor positioning method.”
MethodKe, C.-K., Ho, W.-C., & Lu, K.-C. (2019) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-030-06158-6_24 · Cited by 9
Semi-Automatic Self-Calibrating Indoor Localization Using BLE Beacon Multilateration
Shchekotov, M., & Shilov, N. G. (2018) · Conference of Open Innovations Association (FRUCT) · doi:10.23919/fruct.2018.8588081 · Cited by 9
A Novel Position and Orientation Sensor for Indoor Navigation Based on Linear CCDs
Wang, C., Li, X., & Tu, X. W. (2020) · Sensors · doi:10.3390/s20030748 · Cited by 9
“During the past few decades, many methods have been proposed to realize indoor positioning, such as Wi-Fi [9], Ultra-Wide Band (UWB) [10], ultrasound-assisted [11], Bluetooth [12], etc.”
MethodA Review of Hybrid Indoor Positioning Systems Employing WLAN Fingerprinting and Image Processing
Firdaus, F., Ahmad, N. A., & Sahibuddin, S. (2020) · International journal of electrical and computer engineering systems · doi:10.32985/ijeces.10.2.2 · Cited by 9
“Examples of RF technology used in IPS, among others, are WLAN (Wire-less Local Area Network) or Wi-Fi [25], [26], Bluetooth [27], Zig Bee [28], [29], RFID [30], frequency modulation (FM) [31], and Ultra-wideband (UWB) [32], [33].”
BackgroundHybrid Wireless Indoor Positioning System Combining BLE Beacons And Wi-Fi APs
Subedi, S., Hwang, S.-S., & Pyun, J.-Y. (2020) · International Conference on Information and Communication Technology Convergence (ICTC) · doi:10.1109/ictc49870.2020.9289235 · Cited by 10
“A probabilistic approach of fingerprinting localization using BLE beacon signals is put forward in [7].”
MethodAI-Aided Individual Emergency Detection System in Edge-Internet of Things Environments
Yang, T., Lee, S.-H., & Park, S. (2021) · Electronics · doi:10.3390/electronics10192374 · Cited by 9
Inference Machines for supervised Bluetooth localization
Ishihara, T., Kitani, K., Asakawa, C., & Hirose, M. (2017) · IEEE International Conference on Acoustics Speech and Signal Processing · doi:10.1109/icassp.2017.7953298 · Cited by 9
“[16], which uses Gaussian process regression for building a continuous map of radio-wave signals [17].”
MethodA study of indoor positioning systems using iBeacons with different transmission power levels
Lu, T., Yeh, S., & Chen, C. (2017) · Journal of the Chinese Institute of Engineers · doi:10.1080/02533839.2017.1356692 · Cited by 8
“Faragher and Harle (2015) adopted BLE and Wi-Fi in addition to pattern matching to develop an indoor positioning system, reporting that BLE signals in indoor environments fade rapidly because of disturbances caused by obstacles such as walls or interior furnishings.”
Robust indoor localization with ADS-B
Canals, A., Josephy, P., Tanner, S., & Wattenhofer, R. P. (2021) · ACM Annual International Conference on Mobile Computing and Networking (MobiCom) · doi:10.1145/3447993.3483257 · Cited by 8
“Such methods have been developed using Wi-Fi [3], Bluetooth [10] or even FM-radio [7].”
MethodLOG-a-TEC Testbed outdoor localization using BLE beacons
Bertalanič, B., Morano, G., & Cerar, G. (2022) · International Balkan Conference on Communications and Networking (BalkanCom) · doi:10.1109/balkancom55633.2022.9900607 · Cited by 12
“[11] were among the first to propose the use of BLE for indoor localization, where they achieved sub 2.6 m location prediction accuracy using Bayesian estimator.”
BackgroundMethodInfluentialGHz Prism: Frequency-Scanned Antennas to Improve Localization with Separate-Channel Fingerprinting
Gómez‐Tornero, J. L., López-Pastor, J. A., Gil-Martínez, A., Poveda-García, M., & Brazález, A. A. (2024) · European Conference on Antennas and Propagation · doi:10.23919/eucap60739.2024.10501174 · Cited by 8
“The fingerprinting (FP) technique with BLE beacons has been used for more than a decade for RLTS [3].”
Methodindoo.rs CaLibre - Unsupervised database free RSSI calibration indoor navigation
Dong, B., Burgess, T., & Neuner, H.-B. (2017) · European Navigation Conference (ENC) · doi:10.1109/euronav.2017.7954209 · Cited by 8
Occupant tracking in smart facilities: An experimental study
Sikeridis, D., Devetsikiotis, M., & Papapanagiotou, I. (2017) · IEEE Global Conference on Signal and Information Processing · doi:10.1109/globalsip.2017.8309074 · Cited by 8
“Our solution is utilizing BLE technology and follows a moving-transmitter fixed-scanner approach inverting the usual logic used in similar indoor localization applications [2], [5], [7], [6].”
BackgroundMethodCoding Pavement Lanes for Accurate Self-localization of Intelligent Vehicles
Tao, Q., Hu, Z., Cai, H., Huang, G., & Wu, J. Y. (2018) · IEEE Intelligent Vehicles Symposium · doi:10.1109/ivs.2018.8500513 · Cited by 8
“These methods may utilize WiFi [3], Ultra-Wideband (UWB) [4], Blue Tooth [5], etc., for real-time positioning.”
MethodFusing Map Information with a Probabilistic Sensor Model for Indoor Localization Using RF Beacons
Patel, M., Girgensohn, A., & Biehl, J. T. (2018) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2018.8533758 · Cited by 8
“Traditional RF-based localization techniques map RSSI to distance using the Friis free space model [4].”
BackgroundMethodInfluentialSkeleton-Based Positioning and Reference Point Deployment for Hybrid Wireless Localization
Chiu, C.-J., Chan, F.-C., & Feng, K. (2022) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2022.3153166 · Cited by 11
“Several types of RF systems are being used in indoor positioning systems nowadays, including Bluetooth low energy (BLE) [4], [5], RFID [6], and WiFi [7].”
BackgroundAn improved indoor pedestrian dead reckoning algorithm using ambient light and sensors
Tao, X., Shi, T., Ma, X., Zhang, H., & Pei, Z. (2022) · Multimedia Tools and Applications · doi:10.1007/s11042-022-13072-y · Cited by 8
A Framework for Collaborative All-Source Navigation With Fault Detection and Exclusion
Gipson, J. S., & Leishman, R. C. (2022) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2022.3164016 · Cited by 8
Experimental evaluation of using BLE beacon for outdoor positioning in GPS-denied environment
Qamaz, Y., Schwering, A., & Bistron, J. (2022) · AGILE GIScience Series · doi:10.5194/agile-giss-3-13-2022 · Cited by 8
Analysis and Evaluation of Tracker Tag Efficiency
Hernández‐Orallo, E., Armero-Martínez, A., Calafate, C. T., & Manzoni, P. (2023) · Wireless Communications and Mobile Computing · doi:10.1155/2023/2880229 · Cited by 8
Accurate and Efficient Wi-Fi Fingerprinting-Based Indoor Positioning in Large Areas
Ramires, M., Torres-Sospedra, J., & Moreira, A. J. C. (2022) · IEEE Vehicular Technology Conference · doi:10.1109/vtc2022-fall57202.2022.10012985 · Cited by 8
“Despite being originally conceived for Wi-Fi, fingerprinting is gaining popularity with ZigBee, Bluetooth Low Energy (BLE), LoRaWAN and SigFox [2]–[5].”
BackgroundContact Tracing for Healthcare Workers in an Intensive Care Unit
Zhang, J., Dai, R., Rjob, A., Wang, R., Hamauon, R., Candell, J., Bailey, T. C., Fraser, V. J., Guillamet, C. V., & Lu, C. (2023) · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies · doi:10.1145/3610924 · Cited by 8
Iot based information dissemination system in the field of education
Koshy, R., Shah, N., Dhodi, M., & Desai, A. (2017) · IEEE International Conference for Convergence in Technology (I2CT) · doi:10.1109/i2ct.2017.8226124 · Cited by 8
“[8] aimed to achieve location fingerprintingandused19BLEBeaconsdistributedarounda≈ 600m2testbedtopositionaconsumerdevice.”
Crowdsensing Influences and Error Sources in Urban Outdoor Wi-Fi Fingerprinting Positioning
Leca, C.-L., Nicolaescu, I., & Ciotîrnae, P. (2020) · Sensors · doi:10.3390/s20020427 · Cited by 8
“Other technologies that are readily available in smartphone devices used for crowdsensing, such as Bluetooth [9], cellular [10], accelerometers [11], magnetic sensors [12], or pedometers [13], can also be integrated in fingerprinting positioning systems as has been previously shown.”
Background3-D Localization for Smartphones using a Single Speaker
Murakami, H., Nakamura, M., Hashizume, H., & Sugimoto, M. (2019) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2019.8911804 · Cited by 8
“Among the methods using TDoA are GaoGao [17], ASSIST [18], ALPS [19], and Sonoloc [20].”
MethodPositioning Accuracy of Commercial Bluetooth Low Energy Beacon
Fachri, M., & Khumaidi, A. (2019) · International Conference on Informatics and Computing (ICIC) · doi:10.1109/icic47613.2019.8985797 · Cited by 8
“One research shows Location Fingerprinting With Bluetooth Low Energy Beacons usage in a building, and proven its superiority against wi-fi technology for positioning purpose in term of accuracy [7].”
BackgroundGroup-In: Group Inference from Wireless Traces of Mobile Devices
Solmaz, G., Fürst, J., Aytaç, S., & Wu, F. (2020) · ACM/IEEE International Conference on Information Processing in Sensor Networks (IPSN) · doi:10.1109/ipsn48710.2020.00-38 · Cited by 8
“Lastly, the RSSI values are noisy, as previously explicitly observed for BT signals [12].”
MethodBluetooth Based Indoor Navigation System
Uttraphan, C., Aziz, F. A., Wahab, M. H. A., & Idrus, S. Z. S. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/917/1/012055 · Cited by 8
“In this channel, the Bluetooth will send the data to the receiver [16].”
BackgroundNode Calibration in UWB-Based RTLSs Using Multiple Simultaneous Ranging
Shah, S., Kovavisaruch, L.-O., Kaemarungsi, K., & Demeechai, T. (2022) · Sensors · doi:10.3390/s22030864 · Cited by 8
Improving Precision of BLE-based Indoor Positioning by Using Multiple Wearable Devices
Nakajima, N., Tang, S., Ogishi, T., & Obana, S. (2016) · EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services (MobiQuitous) · doi:10.1145/3004010.3004041 · Cited by 8
“In the proposed method, from RSSIs in a segment of 800 milliseconds during which a user moves at most one meter [6], a median value is computed.”
MethodIncreasing Coverage of Indoor Localization Systems for EEE112 SupportPreprint
Rizk, H., & Youssef, M. A. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1902.01707 · Cited by 8
“Many different techniques have been proposed in the literature which focus on leveraging already existing technology such as Wi-Fi [2], cellular [3][4] or Bluetooth [5] to enable localization services indoors.”
BackgroundIntegration of Machine Learning and Kalman Filter Approach for Fingerprint Indoor Positioning
Rithanasophon, T., & Wannaboon, C. (2023) · International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON) · doi:10.1109/ecti-con58255.2023.10153162 · Cited by 7
“[4] R. Faragher and R. Harle, "Location Fingerprinting With Bluetooth Low Energy Beacons," in IEEE Journal on Selected Areas in Communications, vol. 33, no. 11, pp. 2418-2428, Nov. 2015, doi: 10.1109/JSAC.2015.2430281.”
InfluentialUWB and IMU Fusion Construction Worker Localization Method Based on Transformer Correction
Li, Z., & Li, D. (2025) · Journal of Computing in Civil Engineering · doi:10.1061/jccee5.cpeng-6171 · Cited by 7
Statistical Methods for Fast LOS Detection for Ranging and Localization
Achalla, M., Mack, K., Banavar, M. K., Vanitha, M., & Krishnamoorthi, H. (2020) · International Conference on Emerging Trends in Information Technology and Engineering (ICETITE) · doi:10.1109/ic-etite47903.2020.419 · Cited by 8
“Fingerprinting is another popular method due to its ability to perform better in difficult indoor environ ments [21], but with the caveat that the environment must be mapped extensively to add robustness to the algorithm.”
MethodYonetani, R., Baba, J., & Furukawa, Y. (2024) · ACM International Symposium on Wearable Computers (ISWC) · doi:10.1145/3675095.3676623 · Cited by 7
“…or motion-tracking systems require an expensive site survey to collect referential environmental information, such as visual features [28, 35, 39, 44, 49, 55], wireless fingerprints [7, 15, 18, 36, 46, 54, 62, 63], or magnetometer responses [27, 59], at every location within the environment.”
BackgroundGraph-based map matching for indoor positioning
Koivisto, M., Nurminen, H., Ali‐Löytty, S., & Piché, R. (2015) · International Conference on Information, Communications & Signal Processing (ICICS) · doi:10.1109/icics.2015.7459983 · Cited by 7
“In this paper, a two-mode motion model is used to model the constrained motion of the user as in [3], [5] and [2].”
MethodEffect of People around User to WLAN Indoor Positioning System Accuracy
Firdaus, F., Ahmad, N. A., & Sahibuddin, S. (2017) · Palestinian International Conference on Information and Communication Technology (PICICT) · doi:10.1109/picict.2017.21 · Cited by 7
“Examples of RF technology used in IPS, among others Wi-Fi/WLAN[11], Bluetooth[12], Zig Bee[13], RFID[14], FM[15], and UWB[16].”
MethodIndoor Navigation Ontology for Smartphone Semi-Automatic Self-Calibration Scenario
Shchekotov, M., Pashkin, M., & Smirnov, A. (2019) · Conference of Open Innovations Association (FRUCT) · doi:10.23919/fruct.2019.8711902 · Cited by 7
“The described in this paper indoor localization technique relies on wireless localization methods which are classified in common case into signal propagation model based techniques [10], [11], [12], [13], [14], [15], [16], [17], [18], scene analysis [21], [22], [23] and proximity detection [24], [25], [26].”
MethodJikyo, T., Yamanishi, T., Kamada, T., Nishide, R., Ohta, C., Oyama, K., & Ohkawa, T. (2019) · IEICE Communications Express · doi:10.1587/comex.2019gcl0032 · Cited by 7
“In this study, we take a fingerprint-based approach [5, 6, 7, 8, 9] using a database that stores the relationship between RSSI and position as an existing study of localization using low power wireless systems.”
MethodBluetooth Beacon Based Accurate Indoor Positioning Using Machine Learning
Kotrotsios, K., & Orphanoudakis, T. G. (2019) · South-East Europe Design Automation, Computer Engineering, Computer Networks and Social Media Conference (SEEDA-CECNSM) · doi:10.1109/seeda-cecnsm.2019.8908304 · Cited by 8
“Bluetooth beacons are more easily deployed (especially if battery powered) and not constrained by the need to provide uniform communications coverage [3], [5], [17], [18] .”
BackgroundUser Existence-aware BLE Beacon Firmware for Maximized Battery Lifetime
Jeon, K. E., & She, J. P. M. (2020) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2020.3006221 · Cited by 7
Continuous Non-Invasive Assessment of Gait Speed Through Bluetooth Low Energy
Sansano‐Sansano, E., Montoliu, R., Belmonte, Ó., Aranda, F. J., & Álvarez, F. J. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3157137 · Cited by 8
“Since BLE has been proposed to be used for indoor location purposes [37], [38], its use could be extended to also provide the speed of a user in an indoor environment.”
BackgroundTowards Sub-Room Level Occupancy Detection with Denoising-Contractive Autoencoder
Ng, P. C., She, J. P. M., & Ran, R. (2019) · International Conference on Communications · doi:10.1109/icc.2019.8761294 · Cited by 7
“For example, many interesting research works have leveraged BLE beacon to deliver a better proximity sensing [1] [2], localization [3] [4], distance estimation [5] and occupancy detection [6].”
BackgroundInFo: Indoor localization using Fusion of Visual Information from Static and Dynamic Cameras
Kim, C., Bhatt, C., Patel, M., Kimber, D., & Tjahjadi, Y. (2019) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2019.8911805 · Cited by 7
“Numerious localization and tracking systems have been developed using different IoT sensors such as BLE [15], Wi-Fi [5], [11] and Inertial Measurement Unit (IMU) [22].”
MethodRutvik, J. (2020) · International Journal of Applied Engineering Research · doi:10.37622/ijaer/15.12.2020.1142-1146 · Cited by 7
ArcIoT: Enabling Intuitive Device Control in the Internet of Things through Augmented Reality
Hua, J., Lee, S., Roman, G.-C., & Julien, C. (2021) · IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops) · doi:10.1109/percomworkshops51409.2021.9431115 · Cited by 7
“Other approaches attempt to fingerprint the wireless environment to establish location [15], [16]; these approaches require intensive training and are not resilient to changes in the environment.”
BackgroundA Survey of Internet of Things based Indoor Positioning Systems based on Bluetooth Low Energy Beacon
Rahman, S. S., Kamaruzaman, M. A., Rashid, R. A., Elvin, C. J., Tashbib, E. T., Imran, M., & Sarijari, M. A. (2024) · ELEKTRIKA- Journal of Electrical Engineering · doi:10.11113/elektrika.v23n1.449 · Cited by 7
“Raspberry Pi 3 in [32], [37], a virtual machine based on Linux operating system in [36], ESP32 development board in [46], mobile devices in [29], [47], [49] were hardware devices used for scanning RSSI values.”
MethodSheikh, R. A., Al‐Hadi, A. A., Sabapathy, T., Hossain, T. M., Mirza, H., Akkaraekthalin, P., & Soh, P. J. (2025) · IEEE Access · doi:10.1109/access.2025.3614190 · Cited by 6
“…power decay but is affected by environmental factors; Time of Arrival (ToA), measuring signal propagation time for precise ranging while requiring strict synchronization; and Angle of Arrival (AoA), determining direction via antenna arrays to enable geometric positioning [22], [23], [24], [25].”
Fusing Bluetooth With Pedestrian Dead Reckoning: A Floor Plan-Assisted Positioning Approach
Pan, W., Yang, Y., Wei, D., & Guo, C. (2026) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2026.3725270 · Cited by 6
“BLE positioning typically uses the received signal strength indicator (RSSI) as the primary measurement, deriving common algorithms such as trilateration [12] and fingerprinting [13], [14].”
Dynamic BLE-based fingerprinting for location-aware smart homes
Schepper, T. D., Vanhulle, A., & Latré, S. (2017) · IEEE Symposium on Communications and Vehicular Technology in the Benelux (SCVT) · doi:10.1109/scvt.2017.8240316 · Cited by 6
“5 m depending on the algorithms being used and the practical setup [1, 4, 5, 10].”
BackgroundMethodA Multi-Criteria Decision Strategy to Select a Machine Learning Method for Indoor Positioning System
Yazıcı, A. T., Keser, S. B., Günal, S., & Yayan, U. (2018) · International Journal of Artificial Intelligence Tools · doi:10.1142/s0218213018500185 · Cited by 6
Ercolano, G., Raggioli, L., Leone, E., Ruocco, M., Savino, E., & Rossi, S. (2018) · IEEE RO-MAN · doi:10.1109/roman.2018.8525593 · Cited by 6
“displaced near room doors, to keep the robot from leaving the room [13].”
BackgroundEvaluating a Novel Bluetooth 5.1 AoA Approach for Low-Cost Indoor Vehicle Tracking via Simulation
Paulino, N., Pessoa, L. M., Branquinho, A., & Gonçalves, E. (2021) · Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit) · doi:10.1109/eucnc/6gsummit51104.2021.9482525 · Cited by 6
Measurement and Analysis of RSS Using Bluetooth Mesh Network for Localization Applications
Cao, Y., Kandula, H., & Li, X. (2021) · Network · doi:10.3390/network1030018 · Cited by 6
“Furthermore, BLE location service solutions depend on the RSS measurements on three widely spaced advertising channels that may be associated with different gains and multipath fading effects [5].”
BackgroundMethodResultInfluentialMachine Learning-Enhanced Radio Tomographic Device for Energy Optimization in Smart Buildings
Styła, M., Kiczek, B., Kłosowski, G., Rymarczyk, T., Adamkiewicz, P., Wójcik, D. P., & Cieplak, T. (2022) · Energies · doi:10.3390/en16010275 · Cited by 6
Practical and Parameterized Fingerprinting Through Maximal Filtering for Indoor Positioning
Daniş, F. S. (2023) · IEEE Journal of Indoor and Seamless Positioning and Navigation · doi:10.1109/jispin.2023.3340638 · Cited by 6
“The complex characteristics of radio frequency signals have led to approximating the true PRMs through fingerprinting, in which associated signal parameters are recorded on several positions, called the reference positions (RPs) [13].”
BackgroundEfficient Data Collection and Training for Deep-Learning-Based Indoor Vehicle Navigation
Park, P., Marco, P. D., & Santucci, F. (2024) · IEEE Internet of Things Journal · doi:10.1109/jiot.2024.3371385 · Cited by 6
“The moving average of RSS values compensates for the highly varying frequency-dependent channel gain and antenna gain due to the operation of Bluetooth packet advertising mechanism [33], [34].”
BackgroundLyu, Z., Chan, T. T.-L., Leung, G. C. M., Lun, D. P.-K., & PECHT, M. G. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3381077 · Cited by 6
“manufacturing settings [4], [5].”
Liu, N., Liu, Z., Gao, J., Yuan, Y., & Chan, K. Y. (2024) · International Journal of Communication Systems · doi:10.1002/dac.5828 · Cited by 6
Jin, S., & Kim, D. (2024) · Future Internet · doi:10.3390/fi16120466 · Cited by 6
Generalizable spatial feature for human positioning based on Bluetooth beacons
Bouchard, K., Eusufzai, M. R., Ramezani, R., & Naeim, A. (2016) · IEEE Annual Ubiquitous Computing, Electronics & Mobile Communication Conference (UEMCON) · doi:10.1109/uemcon.2016.7777884 · Cited by 6
“Faragher and Harle [11] implemented this method with Bluetooth beacons.”
MethodAdapted WLAN Fingerprint Indoor Positioning System (IPS) Based on User Orientations
Firdaus, F., Ahmad, N. A., & Sahibuddin, S. (2017) · Lecture notes on data engineering and communications technologies · doi:10.1007/978-3-319-59427-9_25 · Cited by 6
Reducing Error of Positioning Based on Unstable RSSI of Short Range Communication
Nakai, W., Kawahama, Y., & Katsuma, R. (2018) · International Conference on Advanced Information Networking and Applications (AINA) · doi:10.1109/aina.2018.00089 · Cited by 6
Assessing a UWB RTLS as a Means for Rapid WLAN Radio Map Generation
Naghdi, S., Tjhai, C., & O’Keefe, K. (2018) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2018.8533819 · Cited by 8
“Other approaches involve crowd sourcing of RSSI updates [4] while others introduce additional sensor device such as Bluetooth [5], RFID [6] and UWB [7].”
BackgroundInfluentialMeasuring Mobility and Room Occupancy in Clinical Settings: System Development and Implementation
Marini, G., Tag, B., Gonçalves, J., Velloso, E., Jurdak, R., Daniel Capurro, N., McCarthy, C., Shearer, W., & Kostakos, V. (2020) · JMIR mhealth and uhealth · doi:10.2196/19874 · Cited by 6
“There is substantial literature on how to use Bluetooth for indoor localization purposes, and the reported applications range from a simple but less accurate triangulation [18] to more accurate but laborious finger-printing [19].”
BackgroundRECITE: A framework for user trajectory analysis in cultural sites
Orenes-Vera, M., Terroso-Sáenz, F., & Valdés-Vela, M. (2021) · Journal of Ambient Intelligence and Smart Environments · doi:10.3233/ais-210612 · Cited by 6
WiFi-Bluetooth Dual Modal Indoor Positioning System Using Adaptive Range Filter
Zhao, P., Wang, L., Tian, Y. F., Guo, L., & Lu, B. (2021) · International Conference on Big Data Computing and Communications (BigCom) · doi:10.1109/bigcom53800.2021.00031 · Cited by 8
IoT based 2D Indoor Navigation System using BLE Beacons and Dijkstra's Algorithm
Ramaneti, K., Mohanty, N., & Kumaravelu, V. B. (2021) · International Conference on Computing, Communication and Networking Technologies (ICCCNT) · doi:10.1109/icccnt51525.2021.9580047 · Cited by 6
“An IPS based on fingerprinting with BLE beacons is proposed in [11].”
MethodA 3D Indoor Positioning Method of Wireless Network with Single Base Station in Multipath Environment
Wang, Y., Zhao, K., & Zheng, Z. (2022) · Wireless Communications and Mobile Computing · doi:10.1155/2022/3144509 · Cited by 6
“Common indoor positioning technologies mainly include Inertial Navigation [1], Infrared [2], Ultrasonic [3], Radio Frequency IDentification [4], Bluetooth [5], WiFi [6], Ultra WideBand [7], Visible Light [8], and Wireless Communication Network [9].”
BackgroundRefRec+: Six Degree-of-Freedom Estimation for Smartphone Using Floor Reflecting Light
Sugimoto, M., Shimada, S., & Hashizume, H. (2022) · Frontiers in Computer Science · doi:10.3389/fcomp.2022.856942 · Cited by 6
“It has sufficiently high accuracy compared with Wi-Fi and BLE-based methods 2.”
BackgroundAn NFC-based O2O service model in exhibition-space
Lee, J.-Y., Kim, Y.-H., & Yoon, Y. (2016) · International Conference on Electronic Commerce · doi:10.1145/2971603.2971645 · Cited by 6
“Based on literature reviews, we compared the NFC and Beacon methods that are most commonly considered for IoT-based O2O services in an interior space [5, 8, 15, 16, 20, 30, 31].”
MethodIndoor Location Using Bluetooth Low Energy Beacons
Gomes, A. C. D. S. F., Pinto, A., Soares, C. P. D. A., Torres, J. M., Sobral, P., & Moreira, R. S. (2018) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-77712-2_53 · Cited by 6
Novel Guidance CPS Based on the FatBeacon Protocol
Lodeiro-Santiago, M., Santos‐González, I., Caballero‐Gil, C., Caballero‐Gil, P., & Priano, F. H. (2018) · Applied Sciences · doi:10.3390/app8040647 · Cited by 6
“However, as shown in [14], these data can vary with respect to several factors such as emission power, algorithm optimization, antenna orientation, transmission power, beacon density per area, etc.”
BackgroundBeyond the RSSI value in BLE-based passive indoor localization: let data speak
López-de-Teruel, P. E., Cánovas, Ó., Clemente, F. J. G., González, R., & Carrasco, J. A. (2018) · EAI International Conference on Mobile and Ubiquitous Systems: Computing, Networking and Services (MobiQuitous) · doi:10.1145/3286978.3286986 · Cited by 6
“different fingerprinting localization techniques for BLE [2, 4, 5] but, to the best of our knowledge, they are validated usually in small and not realistic scenarios, not taking into account the heterogeneity of the devices involved, andmaking use of the RSSI value as the unique source of information to infer location.”
MethodNaïve Bayes Classifier for Indoor Positioning using Bluetooth Low Energy
Farahiyah, D., Romadhoni, R. M., & Pratomo, S. W. (2018) · Artificial Intelligence and Cloud Computing Conference (AICCC) · doi:10.1145/3299819.3299842 · Cited by 6
“Fingerprinting technique first records the training data of all RSSI detected by a user’s application at an exact coordinate [4], [5].”
BackgroundMethodDevice-Free Passive Human Counting with Bluetooth Low Energy Beacons
Münch, M., & Schleif, F.-M. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-20518-8_66 · Cited by 6
Indoor Position Detection Using Smartwatch and Beacons
Sukreep, S., Nukoolkit, C., & Mongkolnam, P. (2020) · Sensors and Materials · doi:10.18494/sam.2020.2386 · Cited by 6
Indoor Tracking with Bluetooth Low Energy Devices Using K-Nearest Neighbour Algorithm
Lie, K. K., Yeo, K. S., Ting, A. K. N., & Chieng, D. H. T. (2020) · IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE) · doi:10.1109/iscaie47305.2020.9108790 · Cited by 6
“Bluetooth uses 40 channels, each 2MHz wide spreading from 2.4GHz to 2.48Hz [8].”
A Power-Efficient BLE augmented GNSS Approach to Site-Specific Navigation
Dai, Z., & Podd, F. J. W. (2020) · IEEE/ION Position Location and Navigation Symposium · doi:10.1109/plans46316.2020.9110133 · Cited by 7
“BLE is a wireless personal area network technology that aims to provide considerably reduced power consumption and cost while maintaining a decent communication range with low throughput [9].”
BackgroundGeometry-Aided BLE-Based Smartphone Positioning for Indoor Location-Based Services
Rudić, B., Klaffenböck, M. A., Pichler, M., Efrosinin, D., & Kastl, C. (2020) · IEEE MTT-S International Conference on Microwaves for Intelligent Mobility (ICMIM) · doi:10.1109/icmim48759.2020.9299009 · Cited by 6
“There exist various autonomous techniques, as the simultaneous localization and mapping (SLAM) algorithm, [1], or different fingerprinting methods, [2], [3], coming with high preparatory effort.”
BackgroundMethodAn Improved RANSAC Algorithm Based on Adaptive Threshold for Indoor Positioning
Bai, J., Qin, D., Ma, L., & Teklu, M. B. (2021) · Mobile Information Systems · doi:10.1155/2021/2952977 · Cited by 6
Deng, X., Deng, Z., Liu, J., & Zhang, Z. (2022) · Sensors · doi:10.3390/s22114068 · Cited by 7
“Positioning technology based on Bluetooth, Wi-Fi, and ultra-wide band (UWB) can provide good indoor location services, but the cost of large-scale coverage is high [4–8].”
BackgroundRSSI based passive detection of persons for waiting lines using Bluetooth Low Energy
Brockmann, F., Figura, R., Handte, M., & Marrón, P. J. (2018) · Universitätsbibliographie, Universität Duisburg-Essen · doi:10.5555/3234847.3234861 · Cited by 6
MLLoc: Machine Learning Location System Based on RAIM in Mobile Networks
Liu, Z., Chen, L., Jiao, Z., Lu, X., Ruan, Y., & Chen, R. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3383055 · Cited by 5
“In contrast to GNSS signals, there are also much available WIFI [1], [2], Bluetooth [3], [4], and mobile wireless [5], [6] signals in the urban ground environment.”
BackgroundWang, S., Gao, M. H., Li, L., Lv, D., & Li, Y. (2025) · Sensors · doi:10.3390/s25061785 · Cited by 5
“Many indoor positioning technologies have advanced quickly in recent years, including Wi-Fi [3], Bluetooth [4,5], Pedestrian Dead Reckoning [6], computer vision [7,8], and UWB [9,10].”
Two-Stage UWB Anchors’ Self-Calibration and Trajectory Localization
Yang, Z., You, X., Jiang, Y., Wang, H., Wu, X., & Zeng, Q. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3630330 · Cited by 5
“…by urban multipath effect [2] and weather impacts [3] and cannot be used indoors; Bluetooth has low transmission rates and short coverage distance [4]; radio frequency identification (RFID) is only suitable for short-range area positioning [5]; radar and inertial sensor fusion perform well in…”
A Pre-processing Technique for BLE-based Indoor Localization
Choosaksakunwiboon, S., Terawong, C., Suttisirikul, S., Anantavrasilp, I., Thiemjarus, S., Wisadsud, S., & Kaemarungsi, K. (2018) · International Convention on Rehabilitation Engineering & Assistive Technology · Cited by 5
Ordinal UNLOC: Target Localization With Noisy and Incomplete Distance Measures
Banavar, M. K., Wickramasinghe, S., Achalla, M., & Sun, J. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3078331 · Cited by 5
Target Localization and Tracking Using WSN
Jondhale, S. R., Maheswar, R., & Lloret, J. (2021) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-030-74061-0_2 · Cited by 5
Ogasawara, T., Mukaino, M., Matsunaga, K., Wada, Y., Suzuki, T., Aoshima, Y., Furuzawa, S., Kono, Y., Saitoh, E., Yamaguchi, M., et al. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1285945 · Cited by 5
Modern Challenges in Indoor Positioning Systems: AI to the Rescue
Pešić, S. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1005354 · Cited by 5
Field validation of beacon-based indoor tracking and localization system for construction workers
Gong, Y. R., Seo, J., Kim, T. W., Ahn, S., & Luo, Y. (2025) · KSCE Journal of Civil Engineering · doi:10.1016/j.kscej.2024.100017 · Cited by 5
Oliff, W., Filippoupolitis, A., & Loukas, G. (2017) · doi:10.1145/3109761.3109776 · Cited by 5
Neural Network Based Radio Fingerprint Similarity Measure
Dong, B., Burgess, T., Neuner, H.-B., & Fercher, S. (2018) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2018.8533852 · Cited by 7
An End-to-End BLE Indoor Localization Method Using LSTM
Urano, K., Hiroi, K., Yonezawa, T., & Kawaguchi, N. (2021) · Journal of Information Processing · doi:10.2197/ipsjjip.29.58 · Cited by 5
“Faragher et al. [20] adopted fingerprint with fixed BLE tag and mobile scanner style location estimation.”
BackgroundMethodInfluentialNoise-Resilient Acoustic Low Energy Beacon for Proximity-Based Indoor Positioning Systems
Aguilera, T., Aranda, F. J., Parralejo, F., Gutiérrez, J. D., Moreno, J. A., & Álvarez, F. J. (2021) · Sensors · doi:10.3390/s21051703 · Cited by 5
“Different technologies such as Wi-Fi [4,5], Bluetooth Low Energy (BLE) [6,7], visible light [8,9] and ultrasound [10,11] have been extensively used in combination with positioning techniques that include triangulation, trilateration, multilateration, and fingerprinting, among others.”
MethodLuminaire-Based Multi-Modal Sensing for Environmental Building Applications
Pandharipande, A., Lankhorst, M., & Frimout, E. D. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3137542 · Cited by 5
Metadata
- Authors
- Faragher, R., & Harle, R.
- Affiliations
- University of Cambridge (GB)
- Venue
- IEEE Journal on Selected Areas in Communications
- Published
- 2015-11
- Volume
- 33
- Issue
- 11
- Pages
- 2418-2428
- ISSN
- 0733-8716 (ISSN-L)
- OpenAlex
- W1893431417
- Cited by
- 879
- References
- 21
- Citations by year
- 2026: 39 · 2025: 70 · 2024: 63 · 2023: 63 · 2022: 82 · 2021: 105 · 2020: 114 · 2019: 111 · 2018: 114 · 2017: 76 · 2016: 38 · 2015: 3
- FWCI
- 37.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal on Selected Areas in Communications (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Optical Wireless Communication Technologies
- Keywords
- Bluetooth Low Energy, location fingerprinting, indoor positioning, radio maps, beacons, fast fading, power consumption, transmission power
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.